CS5 Extension Manager error message re: plug-in installation

Extension Manager gives me the following error mesage when I try and load "Adobe Photoshop CS5 Automate Plug-ins"
What do I need to do to solve the error message?

That's very puzzling, but you seem to have an older version of the Adobe Extension Manager for CS5.x. You are on 5.0.x, R_Kelly mentions 5.2.x, and I'm on 5.5.x
Maybe you need to make sure you are updated to Photoshop 12.1 update first, then make sure you are updated to Adobe Extenson Manager 5.5.0.163.
This is the version of the AEM that I have for Photoshop 12.1 (CS5.1) which resides on my Snow Leopard 10.6.8 boot HD:
And this is the version of the AEM that I have for Photoshop 12.1 (CS6) which resides on my Lion 10.7.5 boot HD:
This is the Photoshop 12.1 (CS5.1) application info:

Similar Messages

CS5 Service Manager error message?

I keep getting the CS5 service manager error message - ordinal not found. Specifically ' the ordinal 3873 could not be located in the dynamic link library LIBEAY32.dll' Any ideas please on how to fix this?

That's very puzzling, but you seem to have an older version of the Adobe Extension Manager for CS5.x. You are on 5.0.x, R_Kelly mentions 5.2.x, and I'm on 5.5.x
Maybe you need to make sure you are updated to Photoshop 12.1 update first, then make sure you are updated to Adobe Extenson Manager 5.5.0.163.
This is the version of the AEM that I have for Photoshop 12.1 (CS5.1) which resides on my Snow Leopard 10.6.8 boot HD:
And this is the version of the AEM that I have for Photoshop 12.1 (CS6) which resides on my Lion 10.7.5 boot HD:
This is the Photoshop 12.1 (CS5.1) application info:

Extension Manager Error Message

I keep on getting the following error message when I try to update Adobe Extension Manager 6.0.5 . I don't know why this is happening. Can anyone help me?
Extension Manager 6.0.5 Update
Installation failed. Error Code: U44M1P7

Hi Jeff
The error message was U44M2P7.
However I think I may have solved the problem, at least for the time being. First I deleted the entire Adobe Extension Manager folder in Applications. Then I downloaded 6.0.4 again and installed it, without using Application Manager. Then I downloaded the patch for 6.0.5 and installed that, again without Application Manager; EM was indicated in Info as 6.0.5. Seems therefore to be OK, but have not tried to use Application Manager or open Extension Manager since, as I do not need to currently.
Thanks for the help on this.
Kxlivo34

Trying to install Akamai Manager error message

I have tried to down load my new upgrade but when I go to install Akamai Manager I get this message. Java Plug-in 1.5.0_30 Using JRE version 1.5.0_30-b03-389-9M3425 Java HotSpot(TM) Client VM User home directory = /Users/gayeshakeshaft

Hi
I am upgrading from CS3 DS to CS5.5 DS
Mac OSX 10.5.8
ChocCards
Date: Sat, 10 Dec 2011 09:59:38 -0700
From: [email protected]
To: [email protected]
Subject: Trying to install Akamai Manager error message
    Re: Trying to install Akamai Manager error message
    created by Gautham K in Downloading, Installing, Setting Up - View the full discussion
Hi, Which product upgrade are you trying to install using the Akamai Download Manager? Also, which operating system is your computer running on? Thanks
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4075704#4075704
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4075704#4075704. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

"Adobe Illustrator cs5 quit unexpectedly" error message. After I upgratded my imac to Mavericks I can't open Illustrater CS5. Help pls.

"Adobe Illustrator cs5 quit unexpectedly" error message.
After I upgrated my imac from Snow Leopard to Mavericks I can't open Illustrator CS5. (No problem with PS)
Every opening attemp crashes. May this be possible because of third party plug-ins. (eg. Esko Artwork)
Help pls.
Thank you.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

InDesign Content Manager error message in CS3

I recently switched laptops (XP to Win7) and now I'm receiving the InDesign Content Manager error message. I'm running CS3 and the InDesign file is CS3, as well. I also ran the plug-in and software update, but I'm still unable to open any InDesign files. Any help to resolve this issue would be appreciated.

Sorry Willi, that's jut not true. I run CS3 with no issues whatever on two different Win7 pro x64 systems.
I don't, however know what that error message is. Is there any more to it? Have you tried running as Administrator or in XP compatibility mode? (I don't run in compatibility mode, but my users are admins). Do you run a font manager? What do you have for Anti Virus and Malware scanners?

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one?

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.

This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks!

Error message when plugging in ipod

I have two ipods, ipod touch 2nd gen and ipod nano 6th gen. both get the same error message when plugged into itunes that says that it detects the ipod but cannot connect to it because there is an ID error. I've gone through all the steps to ID the ipod, even reformatted the ipod nano and still am not getting anywhere. I've followed some of the steps from some of the other community questions with no results. If someone knows any other suggestions I'm open. It worked fine until the recent iTunes update. Is it their way of forcing you to get the newer products?

Hi erinstab,
Thanks for visiting Apple Support Communities.
I'd recommend starting with these steps if your iPod nano is not recognized correctly by iTunes or your PC:
Plug the device directly into a high-power USB 2.0 port on the computer. If possible, use a USB port on the back of the computer.
Avoid plugging the device into a keyboard, display, or standalone hub. The USB ports on these accessories may be low-power or only offer USB 1.x connections.
If you are using an accessory, remove the accessory and connect the device to the computer using only the Apple 30-pin to USB Cable or Lightning to USB Cable.
If you have access to additional Apple 30-pin to USB Cable or Lightning to USB Cables, try testing with another if the first one doesn't work.
Restart your computer and device. To restart your device:
Hold the power button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
Disconnect all USB devices from your computer, except for your keyboard and mouse. Then reconnect the iOS device. If the issue is resolved, reconnect other USB devices, testing after each connection.
Another article describes what to do if you are using Windows and see an unknown error containing "0xE" when connecting your device.
You can find these steps here:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
You may also find the steps in these articles helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
Regards,
Jeremy

Received error message 213:11 upon installation of CS5.1 upgrade in Windows 7, unable to change SLStore to read only as administrator

Received error message 213:11 upon installation of CS5.1 upgrade from CS2 in Windows 7, unable to change SLStore to read only as administrator as suggested elsewhere. SLSstore reverts to read-only after changing, applying and clicking OK. Same problem after reinstallation.

Gregconn please see Error "License store does not allow writing" | Install log | CS5, CS5.5 for information on how to resolve error 213:11.

Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to

Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to CS5. Can anyone assist

Contact serial number support by web chat.
Mylenium

I'm trying to install Creatice Suite 5.5 on a new Mac but I get the error message "Inconsistency in the installer database. Please restart your computer and install again."

I'm trying to install Creatice Suite 5.5 on a new Mac but I get the error message "Inconsistency in the installer database. Please restart your computer and install again."
I have restarted but that doesn't help.

Jonkpirateboy did you migrate/transfer/copy your CS5.5 application to this new Mac?
If so then please utilize the uninstallers located in the Applications/Utilities/Adobe Installers folder. You will then want to run the CC Cleaner Tool located at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
Finally if you need a fresh copy of the installation files they are available for download at Download CS5.5 products.

Hi there, i erased my macbook and trying to reinstall it, i keep getting an error message"could not find installation for this machine" please what can i do?

Hi There,
I erased my macbook and trying to reinstall it, i keep getting an error message "could not find installation for this machine" what must i do please?

It is the internet connection.
Try again or another internet connection.

Ipod manager error message

I've plugged my ipod mini in to my pc and am getting an error message on the pc saying "ipod manager internal software error". The ipod doesn't register with itunes and the "do not disconnect" message is not going away...can anyone advise what I need to do to fix this?
Thanks!

See this...
iPod Updater for Windows: "Internal manager error" occurs when restoring or updating iPod
btabz

Nano 3rd generationg error message when plug in

i recently got an ipod nano 3rd generation. when i plug it in to my 2.0 USB (windows xp) it says that device detected but "error occurred during hardware insallation" and that "problems may occur while using the device". the store guys say its something to do with computers over one year old. ive done every trouble shoot and they want me to bring in my PC because they say " there is a special way around it" when ive checked for every possible update for my drivers.itunes does not pick up the ipod, there is no "do not disconnect" on the ipod yet it charges, also in device manager there is an exclamation point next to ipod. does anybody know how to get this thing working besides the apple suggests on its website.
p.s ( it works fine on two other new laptops)

Same issue here. When i first plugged it in I already had my 5G iPod video plugged in as well so I'm wondering if that caused the problem...but even though I uninstall the ipod from the USB list and re-try installation without my other ipod plugged in it will still give me the same error message.

Bridge CS5 freezes after error message...."The operation could not be completed, there is not....

Error - The operation could not be completed. Not enough storage is available to complete this operation.
After this happens I have to close Bridge as it is unresponsive to any further commands and I often I have to use the task manager to close it.
I have scoured these boards and the web for a solution and have found others w/ the same problem (even people w/ much more RAM) but have not found a solution beyond the usual advice of changing cache settings, increasing page file, or making sure there is enough hard drive space.
I have two 1TB hdd's w/ over 80% free space on each but I only have 2 GB RAM (all my old motherboard can handle). However, this error message occurs even when Photoshop is not running (only Bridge) and my RAM usage meter shows that I still have plenty of unused RAM available. I did not have this problem w/ Bridge CS4. The error msg. of not enough storage doesn't make since considering the available RAM showing and ample space on the hard disk assigned to the cache (which is a different physical drive than my OS or the Bridge program.)
Here are some of the things I have tried:
reset Bridge preferences at startup, changed the location of the Bridge cache, its size and options, purged the cache, changed the page file size on both drives to the max, defragmented drives, disabled Norton anti-virus, etc.
-What else can I try?
-Would creating a new partition on my 2nd hdd to be used solely for the Bridge cache make any difference and if so, why?
Please help, I am willing to try anything to get this to work. It is a personal challenge at this point.... and I am determined to get Bridge CS5 to work on my machine......
Thanks in advance for any advice or insturctions you may offer!

Dear Customers,
I am Baichao Li, Adobe Bridge Quality Engineer.
Bridge team is investigating this error, In order to reproduce the problem in our lab and find a solution as soon as possible, I would like to ask you to help providing more information, please follow steps below,
1. Download "User Mode Process Dumper Version 8.1" from
http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=e089ca41-6a87-40c8-bf69-2 8ac08570b7e&displayLang=en
2. Install "User Dumper" following Microsoft's article
http://support.microsoft.com/kb/241215
3. Open "Control Panel -> Process Dumper", switch to tab Page of "Processing Monitoring"
4. Click button "New", input "Bridge.exe" for "Application Name".
5. Select "Bridge.exe" from list box, then click button "Rules",
                Select "Use Custom Rules",
                Browse to a custom dump file folder,
                Check "All Exceptions",
                Check "Ignore Exceptions that occur inside Kernel32.dll",
                Select "Mini Dump Type" to "Small"
                Select "Save Mode" to "Cyclic Saving 5 times"
                Others keep uncheck or unselect.
6. Click "OK" button to exit "Rules" setting dialog, then Click "Apply" button, then click "OK" to quit "Process Dumper " dialog.
7. Launch Adobe Bridge CS5, do your work.
8. When that error message occurs, Bridge hang, wait for a while, then kill bridge using "Task Manager", please check if there are some ".dmp" files in "custom dump file folder " which is set in step 5, if so, please zip all .dmp files and FTP to us (please contact me at [email protected] for FTP info). It would be better if you can repeat your hang and send us more zipped .dmp files.
Sincerely appreciate if you could provide us your workflow before Bridge throws that error message, what file formats you use, what features you use and your machine information.
Best Regards,
Baichao Li

CS5 Extension Manager error message re: plug-in installation

Similar Messages

Maybe you are looking for