CS5 fields or codec problem.

I am making a video for TV and here's the technical requirements I get:
MOV. QT Self-Contained IMX30, 30 Mbps    or   Microsoft AVI
PAL, 720x576.
16:9 Full Frame Anamorphic
25 fps.
Upper field (odd).
(liuminance): -1% and 103%
The problem now is that I did submit 1 video with standard PAL DV AVI settings (lower fields) and the client is complaining about this because the TV station had to convert to upper fields. As it was in Premiere CS3 you could choose what fields to use, now in CS5 it's lower by default and unchangeable...
Any suggestions what I can do? Since it doesn't seem to be possible to export QT with IMX30 on windows...

You don't need to use DV, which is always LFF.  You can create an Uncompressed AVI using any field order you like (though it really should match your source media).

Similar Messages

  • Adobe Flash CS5 has encountered a problem and needs to close

    Hi,
    I have two laptops. I have installed Adobe Flash CS5 in my first laptop (Windows XP). When I start the application, it shows the following message:
    "Adobe Flash CS5 has encountered a problem and needs to close"
    I have installed the Flash CS5 in my second laptop and it worked fine.
    Error signature:
    AppName: flash.exe AppVer: 11.0.0.485 ModName: updaternotifications.dll
    ModVer: 1.0.0.64 Offset: 0006a8dc
    Can anybody help?
    Thanks.
    Housea

    try this also
    1. Reset preferences:
    To reset on Windows, delete:
    C:\Documents and Settings\username\Local Settings\Application Data Adobe\Flash CS4\
    C:\Windows\system32\Macromed\Flash\FlashAuthor.cfg
    To reset on Mac OS X, delete:
    /Users/username/Library/Preferences/Flash CS4 Preferences
    /Users/username/Library/Preferences/Flash 10 MRU
    /Users/username/Library/Preferences/com.adobe.flsh-10.0.plist
    /User/%username%/Library/Application Support/Adobe/Flash CS4/
    /Library/Application Support/Macromedia/FlashAuthor.cfg
    2. Install the latest Flash update if available.
    3. Install the latest version of Flash.
    4. Install current Windows service packs and other updates.
    5.  Run Flash in a simplified mode (Windows). / Run Flash in safe mode (MAC  OS - Refer to http://kb2.adobe.com/cps/404/kb404936.html)
    Some  applications or services may cause system errors or freezes when  running concurrently with Flash. Services are specialized programs that  perform functions to support other programs. Before starting Flash,  disable other applications, including startup items (items that start  automatically), and services.
    To disable startup items and services, see "Disable startup items and services (Windows XP)" (TechNote kb404984).
    To re-enable startup items and services:
       1. Choose Start > Run, type msconfig, and click OK.
       2. Choose Normal Startup on the General tab, click OK, and restart the computer.
    Note: If unselected items were present on the Services or Startup tab, then you will need to unselect them again
    6. Install Flash from the desktop.
    7. Reinstall Flash in a simplified/safe (for MAC OS) mode.
    8. Run Flash in a new user account.
    9. Check for font problems.
    10. Optimize handling of temporary files by Windows XP.
    11. Set the virtual memory paging file to the default size.
    12. Repair and defragment hard disks.
    13. Scan the system for viruses.
    14. Identify the file that causes the problem.
    15. Install Adobe Flash CS4 on a different computer.

  • Sound Blaster Audigy 2 ZS Platinum Pro Mic/Codec problem

    Okay, I'm running a ZS Plat Pro and I'm having some problems with my mic settings for some reason. Here's the deal:
    My headphones are plugged into my external hub with the mic into the Line In slot. I have sound, theres power, that's all good. The problem lies with my microphone settings somewhere, I dunno where, with a possible codec problem I'm guessing. Here's why.
    I can't get ANYTHINGto pick up in my mic. All the settings are correct in Control Panal and in my Creative Volume Control. Line In is selected for Recording, the volume is up, it's not muted, my headset is not muted, and the gain is turned on on my external hub, yet still nothing. Here is where hopefully someone can help. I can get it to work in Ventrilo when I go into setup. In setup to test with, I have to select a Codec from a list to use to test with. Meaning, there is NO current selected codec to test with. Once I select one, it works.
    What I'm guessing is somehow, my computer doesn't have a current codec selected for my mic to work with. IE: MSN, Yahoo, Windows Sound Recorder, control panal/sound and audio/test hardware... they all come up detecting no sound at all, when in FACT, I know it works in Ventrilo when I select a codec.
    I've uninstalled and reinstalled the card with up to date drivers. Can anyone help at all please? Thank you.

    Hi Joko,
    Please check your private message.

  • When opening a filn in illusrtator CC I have memory plroble,.  Opening the same file in CS5 does not make problems

    When opening a filn in illusrtator CC I have memory plroble,.  Opening the same file in CS5 does not make problems.
    How can I get in contact with an adobe employee, where I can finally solve my problem with CC (with whom I can send email back and forth or who calls me)... On my PC CC does not work well... I often need to use my old CS5 version.

    You have not provided any proper system info, so nobody can even guess.
    Mylenium

  • I just ran an Apple software update and lost video in my Final Cut 7 running on OS 10.6.8.  It is indicating a codec problem.  Any ideas on how to fix this?

    I just ran a software update and lost video in my FCP 7 timeline (OS 10.6.8).  I get an error message that there is a codec problem and get either a green or black screen.  Anybody have idea how to fix this?

    what happens if you create a new apple prores 422 sequence and drop bars and tone into it.
    Does it display correctly?  If so, I'd assume the the prores codecs are ok.
    Not sure I"ve worked with hdv2 material.  You may need to reinstall your os and fcp and not do the latest software update.  People have definitely reported problems with hdv material after the update.   Maybe someone will speak up with an alternative solution. 

  • CS4 to CS5 audio video synchronization problem

    Hello,
    I have a issue when i am opening CS4 Premiere Projects (Win) with CS5 Premiere (Mac), the problem is that the sound and the video is not in the correct time place.
    Everything is not synchronized and even the videos are not appearing like they should be in Premiere CS5.
    In CS4 all is perfect but when i open this CS5 they are not.
    Any solution?
    Thanks in advance

    What are the specs. of the Assets in this Project?
    The ideal is to address the OOS (Out Of Sync) at the beginning, which you are doing. However, if thing fail, then this ARTICLE might be useful for fixing the problem down the line.
    Good luck,
    Hunt

  • Codec Problems, won't let me open file on another computer due to codec problem??

    Codec Problems, won't let me open file on another computer due to cedec problem??

    Start the computer from the installation disk and perform Repair Disk and Repair Permissions using Disk Utility

  • Premiere Pro CS5 codec problem

    Hey all.  Here's the problem.  At work I use Premiere CS3 on an old Edius box that has Canopus codecs.  When I archive a final copy, I use a DVCPRO HD codec, specifically the Canopus SD50/DVHD codec, to an AVI file.
    At home I have a new copy of CS5 on a new machine.  I brought home some of these AVI files from work that used the Canopus SD50/DVHD codec.  I could not open them up at home on anything.  I went and found the codec and installed it.  Now I can open the files with Media Player no problem, but I cannot import them into Premiere, Adobe Media Encoder, or After Effects.  The result is audio and not video.
    Any suggestions that don't include re-exporting everything using a different codec?
    Thanks!

    Any suggestions that don't include re-exporting everything using a different codec?
    Unless there is a 64-bit version of the codec, you're limited to doing just that. You might be able to drop $160 on DVCPRO HD: MainConcept. No guarantees that'll even work though.
    I'd just convert them to Lagarith Lossless Video Codec or Ut Video Codec Suite; they're lossless, free, and will both work in Premiere Pro CS5.

  • OnLocation CS5.1 Codec Problems

    I installed the trial version of OnLocation in order to try it out and then purchased the Production Premium Suite.  When I launched the trial version and signed in it informed me that I was missing codecs that are not available in the trial version and asks me to install them.  I have clicked ok hundreds of times over several months and it has never finished the download.  The highest percent I have ever gotten to has been 48% but it is usually around 4%.  The weirdest part is that afterward I get a message that says "Adobe OnLocation CS5.1 codecs were successfully installed.  Adobe OnLocation CS5.1 must be restarted to use the new codecs."  But every time I restart the program it tells me I have to install codecs not included in the trial version and the whole process starts again.  Any ideas?
    Thanks,
    Marcus

    So, it turns out I didn't try the very obvious until after I posted this question.  I just reinstalled OnLocation and it fixed the problem completely.

  • MPEG IMX 625/50 codec problems CS5

    Hi All,
    I have some .mov files that were shot on an Arri Alexa (720x576 25i native), recorded onto sxs cards, transfered to a mac then copied via portable hard drive to a pc.  Problem is, the files play fine on a MAC but with the exception of VLC, nothing on the PC will play them - not even Quicktime!  QT says they are in  mpeg imx 625/50 format.  Can anyone tell me how to import them into CS5 so I can edit them on the PC.  Windows 7 x64.
    Thanks.

    Hi JS,
    Thanks for the reply.
    I can do but they're big files (about 2 to 3 gigs each - long takes!) so would take a while.  I'd have to do it tomorrow now coz they're on a hard drive at the office.
    John

  • Codec Problem Premiere Pro CS5

    Hallo,
    ich würde gerne ein Video mit Premiere Pro schneiden. Allerdings kommt beim Importieren die Fehlermeldung, dass der Codec fehlt oder nicht verfügbar ist. VLC spielt das Video aber ohne Probleme ab und gibt als Infos an:
    Codec: Mpeg-1/2 Video (mpgv)
    Auflösung: 1440x1080
    Bildwiederholrate: 25
    Der Container ist MOV.
    Kann man da irgendwas machen um das Video zu schneiden? Es wundert mich ein wenig, weil ich schon HD MOV Videos ohne Probleme mit Premiere geschnitten habe.
    Schonmal Danke für eure Antworten. Viele Grüße
    Foma

    Na wenn er das ganze auf dem Mac gemacht hat, dann ist die Datei auch nur dort verwendbar. Das ist ein uraltes bekanntes Problem, weil Apple sich eien eigene Version des HDV CoDecs gestrickt hat. In dem Fall wäre es sinnvoller, sich die Kamer nochmal zu borgen unds selber in Premiere alles nochmal zu capturen...
    Mylenium

  • Media suddenly offline, codec problem?

    3 AVI files suddenly went offline after i upgraded from CS4 to CS5
    I am unable to find a solution to this myself, anyone out there who can help me?
    Thank you. <3

    If you're dealing with files that are showing up with only audio and no video, you may have in issue similar to one I had when moving from CS4 to CS5. Somehow CS5 doesn't read things correctly and can't find all the info in the file. My specific scenario was with RED files in a .mov wrapper, but I've seen it happen with other codecs in a .mov wrapper. Never seen it happen with an .avi wrapper, but there's a first-time for everything, I suppose. Try this solution, given to me by Colin Brougham last fall when I had a similar issue. Fixed mine perfectly.
    And here's the fix:
    Download MPEG Streamclip, and unzip it--no install needed. The latest beta version is fine.
    Open one of the broken files in MPEG Streamclip.
    Select File > Save As, and select a new save location. You probably want to keep the file name the same as the original (this is the default).
    Hit OK.
    Profit!
    The full details of my problem and Colin's eventual fix can be found here.

  • Interlace or Codec Problem?  You tell me.

    I used Streamclip to convert some DVDs to QTs using the Avid Meridien Compressed codec because they are to be edited on Avid. The edit house said they wouldn't import properly no matter what field dominance they gave. Yet they play fine in Quicktime.
    So I imported them back into FCP and its strange. When I set the sequence settings to all the same specs as the clip, including an avid meridien compressed for compressor type, the clips will sometimes play fine after first inserting them in the sequence, but then when I play them again from the sequence it looks scrambled on the diagonal. Yet they play normally in the viewer.
    Any ideas what's going on?

    My initial settings were for lower field first unscaled. Which indicated it would be 720x480.
    We imported into the avid with lower field first and maintain and resize.
    I took a look at what's happening on avid at lunch today. The image is jumping about 10 scanlines with the interlace, even when given a test that was non-interlaced. Its a PC Avid, BTW, sorry to say.
    On FCP, I had a completely different problem. It just came out looking scrambled like in the days of cable when you could see a channel scrambled if you didn't subscribe. This could be a factor of trying to work in FCP with a sequence set to Avid Meridien, possibly?
    Your DV codec from MPEGStreamclip works fine in FCP, we'll see if it works in avid. If nothing else I can output a tape from FCP. But oy, I will have downgraded the image so much by then.

  • Contribute CS4 and CS5 file transfer (publish) problem on Windows 7 64 bit

    Have a problem with Contribute CS5 and CS4  on Windows 7 64 bit where upon editing a webiste for example to add a new page (or edit an existing one) and then clicking on "publish" a blank page appears on the website. To explain this further, If i make the required changes to the page and select the option to publish the file later then the file wirtten to the PC appears to be ok and has all the changes, but as soon as I publish it, only a blank page appears on the web server.  ie the upload (ftp) process does happen but the content of the page is being stripped out somewhere during the filt transfer process.
    I have editied the same site with CS4 on windows XP without any problems.
    Any suggestions would be appreciated
    Thank you
    Chris

    I seem to have solved the issue by downloading this install file
    ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.2/enu/AdbeRdr920_en_US.exe
    which installs successfully.

  • DW CS5 Missing Related Files Problem

    Hello
    Hoping somebody may be able to help me with a missing related files problem in CS5. I've tried Adobe phone support but they couldn't solve the problem.
    *Some* of my sites (but not all) are not showing all the files related to that page. My pages are typically in .asp vb server model and contain .asp virtual includes (header, nav etc) plus .js and .css linked files
    However DW is only showing the .asp includes as related files and not css or js ones. In design view the CSS is displaying correctly, and all styles appear in the CSS inspector but not showing as a related file in the bar. In CS4 it works fine.
    I've tried deleting the site and recreating it, copying the files to a new folder and setting up a fresh site, creating a new folder and downloading all files from the remote server but no joy. I've also tried refreshing related files. if I click on the filter in the bar it only shows the asp includes and nothing else.
    Any help would be gratefully appreciated, this is a great feature when it works
    Cheers
    MB

    UPDATE:
    Managed to solve this problem, this is a new issue to DW CS5, previous versions do not seem to exhibit this problem
    It occurs when you use site root rather than document relative paths for js/css etc files AND don't have the remote site url (web url) specified in the site setup | local info dialog, or do not have it fully qualified with http://
    ie. ../js/file.js works fine without a remote web url but /js/file.js does not show the related file in the bar unless a remote url is defined.
    Hope that helps anyone else that encounters the same issue!
    MB

Maybe you are looking for

  • Why is my iPhone 4S breaking up SMS messages that are shorter than 160 characters?

    With my iPhone 4S running 5.1, I'll tap out a message that reads on the character counter as less than 160 characters. When I press send, I hear the "sent message" swoosh sound happen twice, as it does when the phone splits a long message into multip

  • Adobe Bridge will not open

    I get a dialog box like the one below when I try and open bridge on an iMac running 10.7.2 When I updated to Lion I did a complete format and reinstall of all programs.

  • Custom Collection Class

    Hello people! In VB.NET, i am used to creating collections of custom objects that inherit from the CollectionBase class. I'm new to java, but i need a custom collection. I need to be able to add and get the index of items in the collection.. at least

  • Bridge CS3 frozen

    I am using a MacBook Pro with OS 10.6.3 and have been having ongoing problems with my Bridge CS3 running slowly and freezing after being in use for many hours.  My immediate problem is:  I went into preferences/cache and checked the 'Automatically Ex

  • Got Mac OS X 10.0, what should i do?

    Good Morning everybody, from my Grandfather i´ve got an old iMac (running 9.x) and a CD with Mac OS X 10.0. He never installed it, since he had bought it in 2001. Nowadays i think it wouldn`t make any sense to install this version of X, ´cause is muc