Cs5 gives error that camera type is not supported when trying to open raw files but worked fine earlier

Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
THis is what I get when trying to open files. Half my session opened fine then all of a sudden i get this error. Won't open in LR5 Either. HELP! using LR5 AND CS5 ON A IMAC with a canon 5dm3. everyhting is up to date as i I checked..

I will try that now. It reads that it is up to date but I will reinstall. The session after it loaded just fine on the same card

Similar Messages

  • CS5 crashes when trying to open RAW files. Help?

    Hi!
    I recently had to reinstall CS5.1 on my mac (OSX 10.9.5) after formatting the hard drive and for some reason I'm no longer able to open RAW-files, neither in photoshop nor bridge. I have tried to remove and reinstall CS5, update my mac and camera raw, but nothing seams to help. I read somewhere else on the forum that it could help to delete the Camera Raw folder in the library, but that didn't help either. Any tips to what might be wrong?

    beltal wrote:
    The newest update for CS5 I could find is 12.0.4, while the version that was installed is 12.1. So I guess re-installing gave me the newest version and not the original? I have tried installing Camera Raw 6.7 both using the updater in photoshop and downloading it manually from adobe, but it makes no difference.
    I've never known any Adobe download of a whole application to install a newer version than the original.  You must have updated it yourself somehow, or you did not use the Adobe-provided Uninstaller to uninstall it in the first place.  Never just "delete" an application; always use the Uninstaller.
    By "deleting the ACR plug-in" do you mean the Camera Raw folder in the library? In that case, it was recreated when I deleted and reinstalled the software again, so it should not be any problem. I just gave it a try since it worked for someone else with the same problem: Can't open RAW .NEF images in Photoshop CS5
    "Deleting" as opposed to uninstalling was my first worry; but no, I wasn't referencing any Folder, but the plug-in itself.
    Note that in the correct path to the Camera Raw plug-in there is no such thing as a "Camera Raw folder".  There is a Camera Raw folder in a different path inside the root-level Library, but that one has absolutely nothing to do with the ACR plug-in nor with anything else we have been discussing here.  That latter "Camera Raw Folder" does not contain the plug-in; it contains only Adobe Patch Files, CameraProfiles and LensProfiles folders.  Don't mess with that one.

  • Getting "Couldnot find Installable ISAM" error in script task in SSIS 2005 when trying to open (.xlsx files) Excel 2007-2010 files using VB script in Visual Studio 2005

    Hi Experts,
    I am trying to open .xlsx file in script task of SSIS 2005. I am using the 32-bit AccessDatabaseEngine driver with the Connection string as "Provider= Microsoft.ACE.OLEDB.12.0; Data Source=xlsx file path; Extended Properties="Excel 12.0 Xml;
    HDR=YES"" in script task.
    When we debug the VB script in Visual Studio 2005 and encounters the statement app.open() it throws the error "Couldn't find installable ISAM".
    My SQL server version is 2005 SP2 DE
    OS is Windows server 2003 EE SP2
    Could anyone please let me know what is the resolution for this error?
    Thanks and Regards,
    Adesh

    Hi Adesh,
    First, make sure the package runs in 32-bit runtime mode (set Run64BitRuntime property to False) because you are using the 32-bit ACE OLE DB Provider. If it is not the case, the issue may occur due to the corrupted drivers or registry keys. You can try to
    reinstall the 2007 Office System Driver: Data Connectivity Components as Arthur suggested.
    Regards,
    Mike Yin
    TechNet Community Support

  • "Error -2147352573 occured at Member not found" when trying to open an excel template

    I'm trying to open an excel document as a template using the report generation tools but coming up with this error.  I've traced the error to NI_ReportGenerationToolkit.lvlib:Excel_Open_Workbook.vi but have to idea why it's happening.  The document seems to be fine as I can open and edit it in Excel.  Has anyone else seen this?  I'm using Labview 8.6 and Excel 2000.  I've attached an image of the error and it's source.  Thanks.
    Attachments:
    Excel open error.doc ‏558 KB

    Hi Mike,
    Thanks for pointing out the compatibility issue. I got the error with version 1.1.3 and therefore upgraded to 1.1.4 - after taking a glance at the readme document. I guess that I was mistaking the supported OS version ("Windows Vista/XP/2000") with the supported version of MS Office ("2007/2003/XP").
    I originally received the error when running an executable on a Office 2000 machine. The executable was built on a Office 2003 machine since I have previously been able to build on Office 2003 and run on 2000. I'm not sure what was different with this executable. Anyway, after installing the LV development system on the Office 2000 machine, the issue turned out to be that some ActiveX methods had been disconnected. All I had to do was re-point the Invoke Nodes to the appropriate ActiveX methods.
    Please note that my application in this case is very simple and therefore only exposes a small part of the Office 2000 ActiveX API. I'm sure that I would run into a non-compatibility wall if I were to implement more Office 2000 functions with RGT 1.1.4.
    Message Edited by Philip Courtois on 06-18-2009 01:26 PM
    - Philip Courtois, Thinkbot Solutions

  • Currently using Flash Pro CS5,  getting error when trying to open CS4 file.  Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

    Currently using Flash Pro CS5,  getting error when trying to open CS4 file.  Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.  Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

    Having the same problem in CS6.  I can tell you that converting back to CS4 will NOT solve the problem.  It seems when support for backward compatibility is discontinued, there's just no way to get
    any help at all?  Absolute failure to provide any user support so far...

  • Can't instal firefox 4, Gives error that my comupter needs to reboot to uninstall an older vesion. But I have uninstalled the other version and have rebooted 4 times now.

    Can't instal firefox 4, Gives error that my comupter needs to reboot to uninstall an older vesion. But I have uninstalled the other version and have rebooted 4 times now.

    I have a similar problem installed firefox 4.0 update (x86 en-us) am told to reboot all the time. I cannot uninstall and it has also messed up my email attachments which I cannot now open except if they are microsot office.

  • When trying to view the Paul McCartney live concert, I received an error that this computer does not support live streaming

    When trying to view the Paul McCartney live concert, I received an error that this computer does not support live streaming

    If you're referring to streaming via itv.com, the minimum system requirements can be found here.

  • Getting error "Object variable or with block variable not set" when trying to open a FR report in studio

    Problem Description
    We are on FR 11.1.2.2.305 installed on AIX. a user is getting this error: "Object variable or with block variable not set" when trying to open a FR report from FR studio client installed on windows xp . Initialy, we thought it may be a FR client installion issue. We uninstalled and cleaned up registry and did a fresh installation of the client but the issue still persists. The FR server and the client are on the same version.
    The user is a LDAP user who is facing the issue. We have confirmed with other users and they dont have any issue accessing FR report from their own client but when they try to connect from the users machine who is having issues, the others users also see the above error. All the users are ldap users and all belong to same shared services groups so the provisiong is the same.
    Any input will be appreciated.
    Thanks

    OK, in this case of one single computer, please make sure that settings as per below KB document as in place and then validate the issue:
    Internet Explorer (IE7, IE8, IE9 and IE10) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
    The information in this document applies to the following Enterprise Performance Management products:
        Calculation Manager
        Data Relationship Management (DRM)
        Enterprise Performance Management Architect (EPMA)
        EPM Workspace
        Essbase Administration Services (EAS)
        Financial Data Quality Management (FDM)
        Financial Management (HFM)
        Financial Reporting
        Foundation Services
        Interactive Reporting
        Planning
        Shared Services
        Web Analysis
    Thanks!

  • My iphoto is not opening anymore..a pop up says "it cannot be open b/c it's not supported on this architecture." Why? It worked fine until now.

    a pop up says "it cannot be open b/c it's not supported on this architecture." Why? It worked fine until now.
    What can I do so that I can open iphoto. I have so many photos in the application.

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

    Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

    wmv is a Windows Media format.  I don't know why Realplayer is coming into it since that deals primarily with Real format files and maybe a few generic formats.
    You need
    Free Flip4mac QuickTime player components - http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
    After installation a new Flip4Mac pane will appear in System Preferences.  Make sure you set the boxes to ensure that it will play WMV files in Quicktime.
    or play the files with VLC
    VLC media player - http://www.videolan.org/vlc/ - general media player that plays just about anything.
    While you're at it you might install:
    Perian codecs for Quicktime - http://www.perian.org - plugins to add functionality to Quicktime for playing additional audio and video formats
    Quicktime audio problems, Perian, VLC - http://discussions.apple.com/message.jspa?messageID=9013669 - read note about uninstalling prior DIVX support before installing Perian.
    Perian doen't do WMV but it's handy to get many things to play in Quicktime.
    Note, if these are protected WMV, nothing on a Mac will play those (unless you also have Windows installed).

  • Are .mp4 files not supported when trying to merge 2 videos into 1 video?

    Are .mp4 files not supported when trying to merge 2 videos into 1 video? The steps in the manual seem simple enough.  But the paste function won't work on the 1st video after selecting all and then copy on the 2nd video.

    There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.

  • IPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync

    iPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync with official apple lightening cable.
    It worked for almost a year then suddenly began to say that. My computer [windows], lightening cable and my power brick [all apple official] are all the same as they were when it was working. The iPod is almost a year old now, and has worked perfectly up until about a week ago.
    I have tried resetting the iPod, plugging it into different charging sources but it keeps saying "Unsupported. Accessory is not supported"
    Does anyone have any ideas on how to fix it?
    Thanks.

    Your iPod Nano firmware and iTunes updated to the current versions? 
    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 

  • I have PSE 8.0 and the error: 150:30 always occurs when trying to open a file.

    I have PSE 8.0 and the error: 150:30 always occurs when trying to open a file. Can anybody help me with this problem?

    click file > place formats to import graphic files.
    http://helpx.adobe.com/indesign/kb/supported-file-formats-indesign-cs5.html

  • Newest version of flash player not playing in newest version of google chrome but works fine in IE

    newest version of flash player not playing in newest version of google chrome but works fine in IE

    jennifer.jones214 wrote:
    In your  opinion, should I uninstall Firefox if I am installing Waterfox?
    Waterfox can coexist peacefully with Waterfox.  I have both installed, but never use Firefox any more.
    Not only can Waterfox run in 64-bit address space, it also is better optimized during compile time than Firefox.  (For obvious reasons; Firefox is compatible with many old systems, Waterfox only needs to be compatible with new 64-bit systems.)
    P.S. regarding Chris' advice above; Firefox and Waterfox use the same profile, so if that is actually the problem, then it will occur in both browsers.

  • HT204074 I have just changed my iPad mini password a day ago when trying to log on today it worked fine until about 4:30 (GMT) when I could not access the device using the correct password. I am absoloutley 100% sure it's correct. Any help?

    I have just changed my iPad mini password a day ago, and when trying to access it today it worked fine until about 4:30 (GMT) when I could not access the device using the correct password. I am absoloutley 100% sure it's correct.Additional details:I was last using Kik messenger before it stopped working.I was sitting less than two foot away from the PS3 my brother was playing.I'm 14 but I'm not some spoilt kid who gets iPhones and iPads from his parents to mess around with, I have got important coursework and homeworks on there.Any help would be great Thanks.

    Hello ConfusedLlama
    If the password is not working to get into your iPad mini, you would need to follow the steps to restore it. If you have a back up through iCloud or through iTunes, you can restore from that back up and it would not bring back the passcode unless it is encrypted.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Regards,
    -Norm G.

Maybe you are looking for