CS5: Having trouble with HDR Pro.

I just got my copy of CS5, and tried HDR Pro. The main HDR Pro screen cuts off at the bottom, hiding (presumably) the OK and Cancel buttons and whatever else is there. I have to Force Quit my way out of CS5. Other CS5 screens that I checked show no such problem. CS4 and PSE8 and PSE9 never had this problem on the same computer and OS. What's going on?
I am using an iMac with OSX 10.6.8.

Any information?

Similar Messages

I keep having trouble with my pro it keep asking me password for my yahoo account

I keep having trouble with my pro it keep asking me password for my yahoo account

These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your phone number from your post.
If you can't remember the answers then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Security' and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox) - but some recent posts are saying that Apple have temporarily suspended the reseting of security question/answers whilst account security processes are improved, so it may take longer.

Anyone having trouble with Logic Pro purchase?

I am unable to purchase Logic Pro -- it gives me an error 100 saying that they are unable to process my request at that time and to contact iTunes stores. I have had no luck with iTunes store help staff and all they do is send me links to others having same issues.
I have no issues with purchase of other apps. Just Logic Pro.
Any ideas/thoughts?
--Mo

Maybe they're about to take it off the appstore...in favour of Logic X

(Cross Post! SORRY!) Having trouble with Mac Pro and Vista/Boot Camp

I feel like this board is more populated, so I thought I'd post this here as well. Forgive me.
Ok, so it took me forever to install Vista. It kept saying my partition wasn't valid even after I'd format it. After restarting like 15 times it finally went through. So, it installed.
BUT, now I have two issues. When Vista starts, I get this weird jumble of like MS-DOS text talking about partitions, weird numbers, my monitors just flash and kinda go nuts with the text then at the top after like 10 second of text, it says 'booting windows vista' with more ms-dos text. Finally after 30 seconds of that, it shows me that green bar that shows up to load Vista then voila, Vista is up and running. The OS works fine, but no matter what, I go through that jumble of text. Any way to get rid of it? What's wrong with it?
Also, now that I've installed Vista, I can't get back into OS X. I have a wireless PC keyboard and a wireless bluetooth Apple keyboard, so I don't know what to do. When I go into Vista's Control Panel to select Startup Disk it says it can't load the program. So I'm at a loss. I really wanna get back into OS X!
Any help would be fantastic!!

Ok, I fixed the issue by using the wireless PC keyboard. I put the Vista install DVD in the drive and restarted the computer. The computer wouldn't recognize the OS X DVD.
I remembered that the computer would register the keyboard inputs after restarting from the Vista Install Screen, so I restarted, held down alt on the PC keyboard and it worked!
Now with the apple keyboard working, I restarted and reset the PRAM which made the computer boot into OS X by default instead of Vista.
BUT, I still get that weird DOS text every time I load Vista, and now after keeping Vista running for a few hours, it starts kinda glitching over time. It loses connection with the network (I had to physically unplug and plug back in the ethernet cable to get it to recognize the network) and for some reason in order to use my apple keyboard, I have to turn it off and on when I get into Vista. It's annoying.
Anywho, if anyone can help me with my Vista problems, that'd be grand :P

Having trouble with macbook pro dock at the bottom of the screen

I have a 13'' macbook pro, and i now have 2 different docks at the bottom of my screen. One is functional and the other one is not. How to i get rid of one of the docks?

Please post the age of your MBP, IE what year is was made, IE what year Model is it. and also as above a image/picture of the screen (a Screen Shot may not do it if the second Dock is some type of Ghost entry).
Other then that you have some type of software corruption or hardware failure going on. There should never be a second Dock at the bottom of the screen. So there is No easy fix for this problem. It may be hardware and if so that hardware would need to be replaced. Or is could be software corruption and in that case a Wipe of the drive and reinstall may be needed.

Is anyone else having trouble with surface pro 3 + kinect v2?

I'm running a cpu intensive Kinect v2 program on a surface pro 3 (all updates installed). It typically consumes about 50% of the processing when the cpu frequency is 100% (all CPU and networking, no graphics)
The problem is that sometimes when I run the program the cpu frequency (as reported by the resource monitor) does not move from it's idle state of 33% so my program chokes. If I remove the power cable, the cpu frequency immediately jumps to 100%. If
I then replace the power cable the cpu frequency will stay at 100%. My program will keep on running fine for a while and then the frequency will drop low again - I can then repair it by removing or replacing the power cable.
Obviously this program is intensive and the fans turn on to cool things down, so I originally thought it was a overheating problem, but the problem can occur immediately on running the program when the surface has just been booted and is completely
cold, or not occur when it's hot. I've tried the power options (not many on the surface) and they have no noticeable effect.
Does anyone have any suggestions as to how I can get the max performance from the cpu and keep it there? Why should the power cable have such an effect?
thanks
--Kim
--Kim

Are you running a WPF application or a c++ application? Try running any of the D2D samples at the same time, to see if that changes the behavior. When you boot the machine was power connected at the time? There are different hardware states
a system can be in based on running on battery vs plugged in. Is the system charging the battery at the time it is plugged in?
If on battery the assumption is you need to conserve which the operating system/hardware will operating in an energy efficient state until which time it is forces to run 100%(games or other graphic intensive work). CPU bound operations only may not trigger
the step up to full speed depending on how the operating system is handling the specific processes. The nature of WPF it was designed to update less often since line of business applications typically don't change the screen that often, so it was designed
to be more efficient that way. Where D2D/D3D applications run at full speed no matter what.
Carmine Sirignano - MSFT

I'm having trouble with Premiere Pro CC...

I cannot use the timeline at all, I have tried everything that I can think of I have used older versions of Premiere. I have just upgreaded from CS3 to the full service of creative cloud. Help me please

What is the actual "problem"?
Have you done any tutorials?
Have you opened a Sequence in the Timeline?

I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.

Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

I'm using Adobe Photoshop CS5 Extended and am having trouble with it.

I just reinstalled Photoshop CS5 Extended from my original disk because I was having trouble with it. I did do an uninstall before installing. Every time I quit Photoshop I get this message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the ‘Get Info’ command in the Finder to unlock the file or change permissions on the file or enclosing folders." Can you tell me what to do to fix this? I went to get info and made changes to read and write, but it made no difference. Thanks for your help.
Richard

Some folders are hidden in the Finder. Use the "Go to Folder" command for that.
Go menu > Go to Folder, enter:
/Users/YOURUSERNAME/Library/Preferences/Adobe Photoshop CS5 Settings
Gene

I'm working with Illustrator CS5 and am having trouble with basic graphics textures.

I'm working with Illustrator CS5 and am having trouble with basic graphics textures. The illustrator drawings look fine with the pattern fills and when I bring the drawing into quark 9.1 they are still fine. When I print the quark file to lo res pdf drawing is still fine, but when I print to hi res pdf (press quality for print) the patterns disappear. I cannot figure out what the problem is.
just a note. Other textures and artistic fills work fine. It seems to be just the basic ones. I'm wondering if for some reason they may not be saved completely in my libraries?

Its just a drawing in black and white with some basic graphic texture to show “dirt” The pattern consists of a bunch of small lines. I save the file as an eps. And bring it into quark. When I print from quark I say print to pdf as press quality. I don’t think the problem has to do with acrobat because I’ve never encountered these problems before CS5. These drawings have been around for years and all of a sudden they don’t work.
Does this help?
Cath
Graphic Specialist
[email protected] 905-403-8658 x297
P Is it necessary to print this e-mail?

Im having trouble with my magsafe L adapter, i just bought my macbook pro around october-november 2011. just wondering if their still gonna replace it though i lost my receipt already. can i buy just the wire, i mean the "L" not the whole charger?

im having trouble with my magsafe L adapter, i just bought my macbook pro around october-november 2011. just wondering if their still gonna replace it though i lost my receipt already. can i buy just the wire, i mean the "L" not the whole charger?

Punch the computer's serial number here and check your coverage:
https://selfsolve.apple.com/GetWarranty.do

I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

Shootist007 wrote:
Clifton I must disagree with you on the above statement. It is my opinion and experience that you should never connect the camera directly to any computer, Mac Windows Whatever.
It is always best to Remove the memory card from the camera and put it in a card reader, whether an external reader or one built into the computer, to copy images from the card.
Hi Shootist. I would be interested in hearing some reasoning on this. I almost always use a USB cable to connect my camera to the MBP for transferring pictures, and have moved about 30,000 this way over the last 6 years since my photography went digital. Recently, on the rare occassions when I have only a few to transfer and I was too lazy to go for the cable, I have used the card reader; about half those times I have difficulty getting the MBP to recognise the card. I find I have to press the card very hard into the slot for it to be recognised.
My rationale is quite possibly wrong, but I feel that the USB connectors are more robust and hard-wearing than the flimsy connectors on an SD card. Also, I haven't measured it, but I think the data transfer is faster with the cable. (I just came across this test, which reports noticeably faster transfer for cable than built-in card reader, but the computer was a PC)
Chiara, sorry for hijacking your thread.

I am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

i am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

Looking up your camera online, I found it is capable of 1920 x 1080 Full HD 60p Recording. It's the 60p (60 frames per second Progressive) that's the problem I think. iMovie '11 will do 60i (Interlaced). You might need to convert it from the format the camera currently uses into another format to get it into iMovie. Read more about it on this link here: How to import 60p footage From that message thread comes the recommendation to use ClipWrap to convert the camera's video clips now that they are in 60p:
Tom Wolsky
Re: How to import 60p footage
Aug 17, 2011 12:40 PM (in response to ptburnett68)
Use ClipWrap to rewrap to QuickTime. Import the files. Edit in either 59.94 or 29.97. The latter if you want to use the high frame rate for slomo

HI, I just bought Photoshop CS5 and I have a problem with HDR pro

HI, I just bought Photoshop CS5 and I have a problem with HDR pro . when I am trying to mount 3 images together it act in a strange way ( the images appear and disappear many times) then when the window with the result appear and I say ok it open up in photoshop as a single image ( in the layers there is just 1 photo) and when I am trying to work it up with the Plug in/filter HDR Effex Pro (Nik softwear) a pop up window appear saying that the file is missing and the operation it is not possible. Why and what is happening ? Someone can help me ?

This is normal operation. The output from HDR pro does not produce a layered file. You make all your adjustments in the Nik Plug-in. Once Nik has finished you then make any rinal changes in Photoshop. Trying to use NIK again on the image in Photoshop is not the way to do this.
When HDR pro comes up do you see all the presets and controls? Presets on the left and controls on the right
MK

Having trouble with Color Swatches - InDesign CS5 to CS6

This may be a repeat - I'm not sure I posted properly the first time.
Having trouble with the Swatches in CS6. When I add our institution's colors, they look dull/gray in CS6. I know it's not just my screens because I created a quick EPS in CS5 for comparison. When I add the EPS file to my doc, the colors pop into the Swatches box but they are clearly different colors. The most remarkable is Pantone 484, which used to be a bright scarlet. Now it's a strange, dull mauve.
I took a screen shot to show a colleague with more experience, but he's stumped. There are very few of us that use InDesign on our campus and we're all self taught. Our tech folks usually come to US for solutions.
I did try the instructions under "Display or Output Spot Colors Using Lab Values" in the Help menu, but nothing changed. That seemed to be the only applicable FAQ that I could find on my own.
Here is the relevant chunk of the screenshot I took - can anyone see what's gone wrong? Color blocks are "old" colors, next to Swatches which show the "new" hues.
Thanks for any help!

Answered in your other thread...
Problems with Color Palette/Swatches in InDesign CS6

CS5: Having trouble with HDR Pro.

Similar Messages

Maybe you are looking for