CS5 Indents Different From CS3? Help Please

I'm completely stumped.
I recently switched over from dreamweaver cs3 to cs5 because it had been running slow. As soon as I made the switch I noticed that in design view EVERYTHING is indented weird. I know this doesn't explain much, but please see the images below. As soon as I publish and check the page live, the indents vanish. I have been searching for a way (maybe in preferences) to remove the weird indents from the design view in cs5 for the sole fact that it irritates me. If it helps, each item is seperated by <dd>. Anyone know what is going on here?
CS3 View
http://i42.tinypic.com/xq9a14.png
CS5 Views
http://i41.tinypic.com/i1ljyg.png
http://i41.tinypic.com/1494aqf.png
Thanks so much!
Brian

Unfortunately screenshots don't tell us much other than there's apparently a problem.
Hard to comment without seeing the code.

Similar Messages

Premiere cs5 Aliasing in footage, any help please?

Hello to you all.
i wonder how many of you have had the problem of footage aliasing in PP CS5.
the problem is that when I import FOOTAGE from my camera into PP cs5, it shows ALIASING at the edges. When I view the same footage on windows media player, the footage is clean and sharp, NO ALIASING. Also I tried importing the same footage in AFTER EFFECTS and again, the footage there is clean and nice, NO ALIASING at the edges. So it must be something wrong in Premiere CS5. !!!!!!! Anyone knows what am I doing wrong please or maybe there is a setting in PP that I`m missing? Graphics card I`m using is the GTX285, with 12 GB ram. Windows version of PP CS5.
Also another problem that is really FRUSTRATING me, is that when I render out from PP cs5, to quicktime with codec MPEG4 or other codec, the result of the render is with MICE TEETH at the edges. I have tried the de-interlacing option, although my footage is PAL and interlaced, but for the sake of the argument, I tried de-interlacing and still the problem is there and can`t solve it. ANY HELP PLEASE !!!!!!! so I dont swallow as many sedatives as i`m swallowing now !!!!!
thanks for your kind assistance guys.
Patrick

Hi
Thanks for your advice, but play back resolution is FULL and yes I`m exporting interlaced footage. The thing is that when I import the footage
it comes out to show in PP with aliasing. When in After Effects it doesn`t.
I`m not exporting to web.
Any more suggestions please.?
Thanks

Novice. Creating a DVD from camcorder - help please..

Hi all,
I am tasked with creating a DVD from some of my dads camcorder tapes. Can anyone provide a simple advice list. I assume that iDVD (which i have never used) will be the software to use?
Look forward to hearing from you helpful and intelligent people out there.
From a complete simpleton.
Kind regards,
Alan

Hello, Alan,
First, you need to determine if these tapes are digital or not. If they are not digital, you will need to convert them into a digital media format that your version of iMovie can accept. (For example, iMovie 6 can accept only DV footage).
Does your dad have the camcorder that he used to record the tapes? If his tapes are not digital, you can connect his camcorder to a digital camcorder and record each tape to digital miniDV tape. I think it is easier to use iMovie 6 for your movie-making, especially if you are thinking about editing this footage, cropping out bad parts, adding titles, effects and/or audio clips. That is why I am recommending recording to miniDV tapes.
Having the original footage on miniDV digital tapes is also a good way to store the originals, takes up very little space.
If his tapes are some other format, post back for info regarding how to proceed,
What version of iMovie do you have? I am assuming that you have iMovie08 since you are posting in iDVD08. As stated, I recommend that you do this project in iMovie 6. If you don't have it on your computer, you can download it here:
http://www.apple.com/support/downloads/imovieHD6.html
And, I recommend viewing this tutorial: http://www.apple.com/support/imovie/tutorial/
Once you have the footage on the miniDV tapes, you can connect your digital camcorder to your computer's Firewire port, open a new iMovie project and import the footage. You should limit each iMovie to about an hour and a half, if possible. A single-layer DVD can hold about 2 hours of content maximum. It doesn't matter what the size of the iMovie is in GB, only its length matters for iDVD.
After you import the footage you want, you can edit the clips and place them on iMovie's timeline in the order you wish. You can choose to add titles, transitions, effects and audio. iMovie has one video and two audio tracks so you can easily see what you are doing. If you want to have different chapters(scenes), you mark them in iMovie. Another advantage of iMovie 6 over iMovie 8 is that you can put chapter markers where you want them, not just at specified intervals.
After your movie is finished, close iMovie.
Open iDVD, create a new project in which to place your movie.
You should do this tutorial before you begin to work in iDVD:
http://www.apple.com/ilife/tutorials/#idvd-create-63
Once you get your first iDVD project ready to burn, do a 'save as disk image' and then burn the actual DVD from the disk image using Disk Utility. You will need to use a good brand of DVD-R disks, such as Verbatim or Maxell. Memorex has been problematic for many, and don't use a cheap store brand. Select a slow burn speed, 4x or less.
That's a brief summary.....
Post back if you need further information! Good luck with your task!

HP Stream 7-Windows 10 doesn't boot, I can't recovery 8.1 because can't boot from USB-HELP please!!

Hi everybody, I'm new here!
I am (scuse me: WAS) enjoying a Stream 7
Some days ago I tried to install Windows 10 TP upgrading 8.1 with Bing. After some waiting time it succeeded, but unfortunately I forgave to put in the tablet's SSD the hp drivers, thinking they weren't necessary. So touchscreen, WiFi and all the other stuff didn't work. After I collegated via OTG a keyboard and a mouse I managed to use Windows 10.
Trying to install drivers, my fault, I opened an .exe of Realtek (maybe for the audio), tablet asked to reboot and after that I cannot access to Windows anymore.
I tried to boot Windows 8.1 from a USB, but it doesn't boot, the same even if i disable secure boot.
With disabled bitlocker Windows gives this error
In boot option I set these settings
I put the usb in this way:
The Stream doesn't consider the USB absolutely XD
If I enable again the secure boot Windows gives this error (that at 99% is caused by the .exe I installed):
Rebooting the Stream a couple of time with secure boot it goes in a menu (where touchscreen works) where there are a lot of options to reset Windows, but none of them works. If I try to format from this menu it asks for my account's password, but it doesn't accepts the mine :/
If I try to open the recovery (from volume minus button when it starts) it gives this message:
Waiting for help,
Thank you for your patience!
This question was solved.
View Solution.

Hi everyone. I think I have found a solution to this problem. Short background story, I too tried to install Windows 10 (10049) via Windows Update but I was never successful - got stuck at around 30% for more than an hour. I tried to restore to 8.1 but it gave me that 0xc000000f error. Luckily I had made a recovery image to USB before updating to Windows 10.
Please note that by doing this method, you will obviously lose your data.
Here's what you'll need:
- Recovery USB (if you don't have one, grab it from this link and I thank you that person from another post). Follow the instructions, this is just basically clean, format to FAT32, set primary and active, and then drag and drop the files and folders from the USB folder to the root USB drive. This particular recovery is from a 5701 model, there is actually no difference between Stream 7 models in terms of hardware, but software is configured differently (different language setup/format) depending on the country/region it's sold.
- OTG cable
- Powered USB hub
- USB Mouse and Keyboard
- A moment of your time
1. Plug in the OTG cable to the tablet, and then plug in the USB hub to power and to the OTG. After that, plug in the USB mouse and keyboard and Recovery USB to the USB hub.
2. Boot the tablet to BIOS by holding down Power + Volume Down at the same time, until you reach the Startup Menu.
3. Press F10 and navigate to System Configuration > Boot Options. In this menu, we'll have to restore the settings to default.
So if you have disabled Secure Boot, you first need to Clear All Secure Boot Keys and then Load HP Factory Default Keys. Then enable Secure Boot.
Make sure UEFI Boot Order is also default to as follows: OS boot Manager, USB Diskette, USB CD/DVD, Network Adapter.
If you did not make any changes, proceed to 4.
4. Be prepared to go back to the Startup Menu, because as soon as you press F10 and hit Yes, the tablet will automatically restart. So press and hold the Volume Down button after you hit on Yes.
5. Press F9 and select Boot From EFI File. If you've done the recovery image ghosting correctly onto the Recovery USB, you should see two entries. One should be RECOVERY and the other may depend (it could be SYSTEM or No label). Select RECOVERY, and then select bootmgr.efi.
At this point the tablet will boot off from the USB and will bring you to Windows Recovery.
6. Select your keyboard layout, and navigate to Troubleshoot > Reset your PC.
If the drive partition/boot manager is not damaged, it will ask for a recovery key. You can actually skip this step and hide the numpad, revealing the option Skip this drive if you don't have the recovery key anymore, or just really want to start anew.
If the drive partition/boot manager is damaged, the Reset will proceed and will ask you to select a target operating system. In my case it was Windows 8.1.
7. The next screen will be about Reset your PC telling you what's going to happen. Tap Yes > Yes, repartition the drives > Fully clean the drive > Reset.
The tablet will now do its thing and restore to factory default.
After restoration, a BIOS screen will come up asking if you want to clear the TPM keys. Select Yes, and this will create a new key for the restored installation, bringing you back to a fully factory default tablet.
Notes:
I recommend not installing a generic Windows 8.1 ISO that is copied straight to the USB drive using the Windows 7 USB/DVD Tool or RUFUS. They won't be compressed or the same as WIMBOOT, which will take up more storage space than stock recovery.
You could actually install another version of Windows 8.1 on the tablet, assuming you know what you are doing (ie. making a WIMBOOT image).
You could also actually install Windows Technical Preview directly, again, assuming you know what you are doing.
This is just a guide to help you try recover your tablet from a failed Technical Preview installation. I hold no responsiblities over your actions.
What I recommend is that use 8.1 for now, and wait for the official release (or at least a more stable Technical Preview release for this tablet if you can't wait that long) of Windows 10.

Why is a color print from CS5 so different from the same image in CS4?

I have made prints from the same file using CS4 and CS5, and the prints from CS4 are showing what I think is good color. My monitor is calibrated, and I have always been quite happy with prints from CS4. When I make prints of the same files using CS5, the color is terrible compared to the CS4 print. I am using the same printer, same sRGB color space and all the settings in the "Print" dialog windows. I make sure the Color Handling box is set to "Photoshop Manages Colors" and I then go to the "Page Setup" box and make sure Color Settings is set to Off (No Color Adjustments). I am using a New MacPro Quad-Core Intel Xeon with 16 GB ram. I did notice that Apple Software Update did install Epson drivers after I installed CS5 Creative Suite 5 Design Premium. The color using CS5 looks the same starting in either 32 bit or in 64 bit. Another thing I notice is that printing on an Epson 2200 Stylus and using their 13x19 paper that the prints are being cropped to 5/8 inch into the full screen size of the images. I.E. The prints are losing 5/8 inch of what I see on the 30" Apple monitor. in both dimensions of the screen image. This cropping effect is showing now using CS4 and CS5. I have "Position" checked for Center Image, and Scale to Fit Media is also checked. I've been using PS since version 2 and have always been quite happy with the prints from my Epson printers and the prints from my Photo Lab, but the prints I am getting using CS5 are terrible. All the settings are the same in both the CS4 and CS5 "PRINT" windows.
HELP!!!! :-)

I have tried all of these things. I have checked and double-checked the print dialog. Sheet after sheet of paper goes by. Ink, at $40 per tank, is wasted. Results are still wrong. I followed your video. You use an Epson printer. I use an HP. Different print dialogs. different results. Whatever worked in previous PS versions does not work now. PS CS5 requires new settings to get the results that match what was determined by years of evolution and fine-tuning.
I set up all of those print dialog parameters but it required an adjustment layer or two to get the results I got using previous Photoshop. So I could do that with every image I printed with good results using previous versions. There is nothing out of gamut in these images, so I don't have unrealistic expectations about more saturation in the prints. Anyway, it's an 8-color printer that can handle a pretty wide gamut compared to a 4-color.
Wade, I know you are trying to help but this finger-wagging "error in your ways" and "you need to change your ways" stuff is patronizing. I did "change my ways" and try everything in your video. All was not well on the paper. I'm glad it worked out for you but it didn't for me. Accept it. I'm not some novice hobbyist still getting the hang of Photoshop. I've been using Photoshop since version 2. Adobe changed something in CS5. I haven't seen Chis Cox or any Adobe staffer jump into this discussion and say otherwise. Maybe there are no answers from the folks who should know the most about it. Maybe they're working on it.
It's not the first time Adobe has broken a tool. Anyone remember what happened to Outline Stroke in Illustrator CS2? It had previously made a path that could be edited by selecting points but after CS2, it was broken. Illustrator made a filled path that was nearly impossible to edit with all of the overlapping points. It was finally fixed in CS4. It's hard to understand how a useful tool that functioned properly in every version since it was introduced became an unusable mess. Maybe that's the case with PS CS5 and printing.
With 4,300+ posts in 14 months, maybe Wade has more time to tinker and tell us about it. I don't.
Or I could just print in CS4. At this point it's not that important to spend several days of testing to be able to say that CS5 can print my legacy stuff that was created and printed with various color profiles over a 12 year period. Maybe a more disciplined approach to color management would be a good way to work in the future when creating images, I'm dealing with tried-and-true printable images that were not done that way.
As long as Adobe doesn't make me give up CS4 to use CS5, I'll use it for printing.

Sound problem with QuickTime .dv files exported from iMovie ~ help please

Hi
I have been working for ages on an important project which is intended to wind-up as a numbered edition DVD, limited to 50 copies.
When I worked in iMovie HD 5 this NEW PROBLEM didn't arise: I did what I thought was the right thing and bought iLife '06, then upgraded from the Apple site, so now I am using iMovie HD 6.0.1, iDVD 6.0.1 and QuickTime Player 7.0.4.
I've designed my own menus and the procedure as most anyone will know [thanks iCreate magazine!] is...you have to 'export' (or now 'share') the iMovie to QuickTime (or with QuickTime) which produces a .dv file which you then drag-and-drop into iDVD.
I've got 4 of these .dv files for the start-up and some menus.
THE PROBLEM IS whereas the sound (it's actually music) has been faded out (in synch with the image) ~ in iMovie everything seems fine ~ but THE QUICKTIME .dv FILES HAVE AN ANNOYING LITTLE "FLARE-UP" OF MUSIC AT THE END OF THEM.
Imported into iDVD, in preview: sure enough! ~ you hear the annoying, untidy-sounding snips at the end.
It's ruining my project ~ please help, someone!

I am having the exact problem, it's a real show stopper.
I have tested hardware, software, media as below.
Tested on
1 Intel 17inch iMac
2 G4 AGP 450 + 1.2Ghz Model
Each have a fresh install of iLife 06 on
Each have been tested with different project files.
Differnet music files
The issue seems to be with apples iLife software to me.
I am on the phone to apple right now, they only surgest I create a new user as it generates new prefs, but the above test has already rulled out preference files!
Also rebuilding and reinstalling, but again the above test has rulled that out as the 3 machines were freshly built.
I have already upgraded my graphics card in my machine at home to sort out preview problems with iMovie, hopefully it's not going to be an expensive audio card aswell.
If any 1 can throw any light on this please do as apple support can't.
Regards
Paul

Recovery itunes library from iPod (help PLEASE)

So I was stupid and didn't back up my iTunes library, I've now lost it all apart from a 128gb iPod.
Can anyone PLEASE advise how to transfer those songs from my iPod back into my iTunes library (iMac running OSX Yosemite)?
Much appreciate any help that can be offered...
Dan

Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself independently backed up against loss. To use a device with a new computer you transfer the content from the old computer (or its backup) directly to the new computer, not the device to the new computer. Media syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

DVD from Animations - Help please if you can

We have an 3min animation sequence that needs to be put to DVD.
Animation was created in Maya, it's a 3D building walkthrough, constant movement.
It is supplied as AVI (video track is WRAW) 720x576 (for PAL)
We have placed it on FCP sequence set to Animation, best, millions colours, keyframe every frame.
Sent to compressor - 8Mbps CBR, best motion, GOP size =7 / Structure =IBP, closed.
The resulting M2V looks fine in QT
It also looks fine in DVDSP Simulator
However the DVD created (from an image) both in Apple's DVD player and on set top players looks badly pixelated, grainy and flickery.
Is there something in the make up of the animation that doesn't suit DVD playback? Why wouldn't we see it in the Simulator?
Any help greatly appreciated.

Thanks Colin,
I have exported the supplied file as QT movies using different QT Codecs, DV PAL, Animation, Motion JPEG, also DV stream. If the option is there I have set the field order to Lower first. I have also imported the supplied AVI to FCP onto sequences with differing compression settings as above. All produce the same effect.
I have exported the AVI from QT as an image sequence, once as is and once with the deinterlace ticked in movie properties and imported each image as a frame to FCP onto a DV PAL timeline, this you would think would work around any issue of field order and behave as the sequence settings dictate? I get the same result, the final DVD image looks fine in DVD Player, unless you UNTICK "deinterlace" (which is wierd in itself), then it flickers badly, as does a DVD written from the image.
The best result I have had so far is following your instructions (thanks) in another post for 24fps NTSC, the final DVD was not flickering anywhere as badly but motion overall was a bit jittery. Is there a work around for animation like this with PAL do you know?
Also - maybe this might be a clue?
When I have the clip looking fine in FCP as a DV clip or image sequence on a DV timeline, with the play line stopped or running, the Canvas ONLY looks good at 100%, anything smaller or larger creates this striping moire effect on the image, visible even with the play line in stop.

"no access to the digital certificate" - Trying to export my first iOS app from Flash - Help please

Hello
I'm trying to export my first iOS app from flash to my desktop / on the device (Flash Pro CC, Iphone5)
I followed the instructions on the adobe website to build an air app for iOS but on the last step it
doesn't export the app.
What I've done so far:
- Apple developer account
- creating the certificate + convert it to .p12
- app ID / Name etc.
- creating the provisioning profile from apple
- iOS Air app in flash (Only Text "Hello world" with a tween)
Now i have to load the certificates into Flash & enter a password (is it the password that
i entered in the certificate or from my developer account/ Apple ID password? Both didn't work at the end)
When i klick on publish in the last step than it loads a while but then i get the Error:
"no access to the digital certificate"
What is wrong? Can you help me please.

Also, I should say, when I go into my phone on the computer and try to install an app, I get this message:
Unable to start operation. Installer is already in use.
Any ideas

Need to buy CS5 Design Standard, New Laptop-Help Please

My wife is a student taking a graphics class a and she must buy CS5 Design Standard (Photoshop, InDesign, Illustrator and Acrobat). Her computer just broke down and we need to replace it right away but we are on a tight budget. Can we get by with a budget type laptop with modest graphic support (maybe 500-600 dollars) or do we need a high powered, big dollar laptop to run the CS5 Software?
Thanks for your replys.

It would be easier if you pointed us to the laptop you had in mind but I can't see how a $500 laptop is going to be satisfactory. I would think more in the $600 area you might be able to squeeze buy. Check out the Dell Vostro line.
You can also save a few bucks buying the Student and Teacher edition at Amazon. No tax in most states and free shipping: http://amzn.to/dms74a
Please make sure she's eligible for that before she buys it. Adobe requires proof before sending the serial number. Details are here: http://amzn.to/9LXvIX
If not, she'll have to buy the appropriate full or upgrade version. That can be a bit hard to figure out but I created an online store with Amazon and sorted through it all. You can check it out here: http://www.theindesignguy.com/book-and-software-store.shtml
Hope that helps,
Bob

Cannot install CS5.5 (upgrade from CS3) on my new laptop

I need to install CS5.5 on my new laptop. I downloaded the installation files, but i cannot install.
My CS5.5 Design Standard is an update from an CS3 Desing Premium which i purchased some years ago.
I do have the serial of my old CS3, but unfortunaltely i lost the installation dvd
Do i first need to install CS3? Or can i just put the serial somewhere?
Thanks Martin

Martin_Shoe wrote:
I need to install CS5.5 on my new laptop. I downloaded the installation files, but i cannot install.
Can you elaborate?
First question: is your CS5.5 for Windows or Mac? Is your new laptop a Windows or a Mac? You cannot use a Windows serial number to license a CS5.5 on a Mac and vice versa.
Assuming you're installing on the same platform, there's no need to re-install CS3 first.
All you need to do is install CS5.5 (the code for an upgrade version is the same as for a full version), enter your CS5.5 upgrade serial number then enter your CS3 serial number when prompted.

Acrobat 9 Form won't mail from Vista- help please?

Id like to thank all past help from the forum. Sorry I haven't written my gratatude before this. That doesn't mean I don't apreciate the help. I've gone from one super frustrated and dissapointed user to someone slowly begining to apreciate exactly what Adobe 9 Pro really is, mainly from what I've picked up in this forum.
So far I've managed to make a registeration form that can be e-mailed to people, they fill it in and click the send button and I get it back. When it arrives, it even updates the database properly. I'm so proud about this achievment too... Except for when a Windows Visa and probably Windows 7 user tells me it doesn't work. They report an error when trying to send the form back! Grrrrr. What have I done wrong?
Just when I thought I was doing so well, this happens. It's been very hard for me to learn the fundamentals of Acrobat 9 Pro at an age when most people around where I live are struggling to understand how to program their microwave! -- Well not quite but I'm sure you get the meaning.
When I get a problem like this all I think of is that if I took the time to understand what I was doing it wouldn't happen. Then I wonder if maybe an easier solution exists. When I calm down and realise there are still some people in the world who are willing to help and not trash your efforts, I'm sure someone here will know the answer and hopefully, point me to it.
Once again, thanks for the help in getting me going with this software. I'm glad now I didn't buy some cheap clone stuff.
Doug.

I'm unsure if I can post a link here to the form. But I'll give you a run down. I used the "forms" selection of Acrobat 9 Pro to create a registeration form. It can be downloaded from my web site and sometimes we attach it to an email. Interested people fill in the form (at this stage it is being seen with acrobat reader in a web browser). There is a purple line at the top of the form with instructions to click submit form to return the completed form.
The form is "distributed" although I'm unsure what Adobe mean by this description. My guess is that the return end that does the record keeping is activated.
I might point out that I've had a lot of problems with forms and the Adobe solution is one my instructor at night school suggested. I thought offering the ability to return it by email or if that didn't work, print it and fax it back was enough until I learn a better way of doing it.
Although this looks like quite an nice way to do it, the delay in loading the form is one issue I am concerned with and the fact at least 4 of my 40 replies (so far) have had to fax it bothers me. I'm open to any suggestion (costly or otherwise) that is going to overcome this problem as forms become more and more important for my operations.
Thanks for your reply. If I can discover it it is in order to post a URL here to the form, I will.
Doug

Ghost Documents/ CS3 Help please

I have OSX 10.4.11. I found that when using a flash drive, my computer makes a copy of everything i put on it. I can't see the other copy so even when I delete everything on the flash drive, it only is half empty. The only way I can get rid of these other copied files is to "show hidden files" when I plug the flash drive into Windows. Anyone know how to fix that?
With that noted, I had the Beta relaese of CS3 and I wanted to get the official trial version because the Beta was messing up. I deleted everything I could find that had to do with the Beta but still kept getting a message when I tried to install the new version saying, "Adobe Photoshop could not install becasue of a conflit with Adobe Photoshop." I tried a couple of times and this was all that kept happening. Is there a hidden back up of Photoshop Beta that I can't see or get rid of which the trial version is having problems with?
Any help would be great.

Romus:
In terms of Photoshop, check your install disk to see whether there is an uninstaller. If not, try AppDelete. Dragging items to the Trash only removes the files you can see. However, the installer is seeing files embedded elsewhere in the system. Using the utility linked above or the uninstaller that came with the application, if any, will remove every trace.
In terms of your flash drive, when you are done moving your files you can delete everything on the flash drive by going to Disk Utility and erasing the drive. The system creates the hidden files for it's own use.
Good luck.
cornelius

Getting this error with CS3, help please!

With those settings can you tell me how to setup my CS3 to render with that issue?
Thank you!

The text of the error message has most of the instructions you need to help with this problem.
First try reducing the Maximum RAM Cache size to 90% or lower. (The default is 60%.) It's a bad idea to let AE, or any app, max out the RAM.
You can try increasing the Maximum Memory Usage, though values over 200% aren't useful.
For both of those memory values, increment in small values, 10-20% at a time. Don't ask AE to use more RAM than necessary; bad things like fragmentation and swapping start to occur.
Also, try the options under the Edit > Purge menu when you see this type of problem. You'll lose your existing RAM previews, but it will free up memory, which may indeed be fragmented.

Encore CS3 help - please

I have been told by an Adobe tech support agent that I can use Encore to provide a solution to the problem I have re getting the flash animation on my website to "Play Once" and NOT LOOP. I also need it to display the last frame as a still image if this can be done in any program known to mankind. It appears that this task may be to "simple" for such a capable program as Encore. Noe of the ceap little flash editors had any idea how to do this either. Can anyone tel me how this can be done? I have had no luck with Encore so far. Any help is appreciated. Thanks - ssea

I don't understand why you can't get this to work using Flash. Have you asked in the Flash forum?
CS3 is very limited on what you can do to customize player controls. So that's a big trade off.
Yes, you can have a first play that is the animation, then have it come to a "menu" that would be a still image, no DVD style menu buttons - but you'd still see the player controls.
Also, the animation would have to be DVD spec (i.e. TV pixel size). I'm not sure what effect you would get if you use html to reduce the playback size.
Anyway, I vote for Flash unless there is something I am missing.

CS5 Indents Different From CS3? Help Please

Similar Messages

Maybe you are looking for