CS5 install issue? only appears to be a frame instead of filling the scree on Mac osx

CS5 install issue? only appears to be a frame instead of filling the screen on Mac osx
When I click on the middle it takes me back to the desktop

Hi,
I would recommend posting this query in the Adobe Photoshop forum.
You will get a specific response relevant to this question.
Thanks

Similar Messages

  • Trying to install the FolioProducerTools-CS55 (Mac OSX)

    Trying to install the FolioProducerTools-CS55 (Mac OSX), but running into a "damaged" installer error. Why would I receive a damaged error? Where can I find the latest toolset for InDesign CS5.5?

    Don’t bother. DPS is no longer supported in CS5 or CS5.5.

  • The Java for Mac OSX 10.5 Update 10 removed the Java plugin from Firefox 5.0. How do I re-install it?

    I've just installed Java for Mac OSX 10.5 Update 10 and can no longer run Java Applets from Firefox 5.0

    Dear Craig,
    Macbook Pro 2.4GHz Intel Core 2 Duo 4 GB RAM
    I'm sure that this is 64-bit
    CF 8.0.1 Enterprise Build 3080
    I had moved the Java SE 6 to the top in both Plugin and Applications. The
    correct version is showing in the terminal window. See below.
    Last login: Thu Jun 18 11:27:09 on ttys001
    Beta-4:~ Colin$ java -version
    java version "1.6.0_13"
    Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
    Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
    Beta-4:~ Colin$
    CF will not start. I have the activity monitor open, and when I start CF you
    see it in the activity monitor for a few seconds as it starts up. When the
    message process is completed in the terminal window CF disappears in the
    activity monitor.
    Any suggestions?
    C
    Hi, Colin,
    My apologies but I forgot to ask 2 questions: (1) What kind of Mac you have
    (Intel or PowerPC)? (2) What version of CF are you running and what installer
    did you choose (8 or 8.0.1, 32-bit, 64-bit, etc.)?
    To start, try the following:
    1. Normally you'd shut CF down first ... but that's not necessary for you
    2. Open Java Preferences again
    3. Select Java SE 6 and move it (drag) to the top spot in both section (Applet
    Plugin and Applications)
    4. Open Terminal
    5. Type java -version (you should see 1.6.0_13 as the new version)
    6. Try to start CF again
    This may not work (I've had issues with it) but it's technically how it's
    supposed to work. With the Java Preferences utility, you're visually setting a
    default JVM (you can do it with commands in Terminal but this is much faster
    and easier).
    If CF still won't start, look for the jvm.config file in your CF application
    folder (try /Applications/ColdFusion8/bin or
    /Applications/ColdFusion8/runtime/bin -- the latter is where a jvm.config file
    is on my machine for a particular version of CF that's installed similar to
    yours). You can override the JVM in this file but, hopefully, that won't be
    necessary!
    Best,
    Craig

  • How to Fix Photoshop CS5 Install Issues

    To find the Complete installer log which can  be found at
    <drive>\Program  Files\Common Files\Adobe\Installer      ---> if you are on 32 bit
    else at  <drive>\Program Files (x86)\Common Files\Adobe\Installers    ---> If you are on 64 bit
    Then go to this website http://go.adobe.com/kb/ts_kb404622_en-us,

    post a message if this works for you!!!!!!

  • Known issues with CUDA 5.0.17 driver (including crashes and kernel panics) on Mac OSX

    We have recently learned of some issues with the new CUDA drivers from Nvidia that cause crashes and kernel panics in some circumstances, including when switching between applications that use the GPU.
    See this page for details.

    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
    If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

  • Can only see first and last frame of clip in the timeline HELP PLEASE

    Hi, my first time and I did look for an answer, but can't find one. I have premiere elements 4 and I am trying out ver. 9. In ver. 4 the clips in the timelin shows all the frames, but in ver. 9 it only shows the first and last frame of the clips. Is there any way to make all the frames show. By "all the frames", I mean the clips fill with frames.I liked to see all the frames in the timeline, it is easier for me to select and trim the bits out.
    My specs are Core 2 Duo 6750, Nvidia 8600GTS, 4G Ram, Vista Home Premium. 3 HDD 3TB.
    Thank you for answering
    Werner

    As for the GUI, PrE had one more like PrPro (the early versions), up through PrE 3. With PrE 4, they streamlined the GUI (and some of the operation), and went with the "dark look." PrPro went in that direction starting with CS3, and now, the two programs' GUI looks more alike - darker. Personally, I like PrPro 2.0's brighter GUI. Now, one can alter the brightness, but the contrast can work against doing much of that - give me the lighter GUI....
    The look of PrE 4 thru PrE 9 is very similar, though things have moved about some. Still the look is similar. Same for PrPro CS 3 through CS 5.5.
    As for the trial, things have changed in PrPro, as of CS 5.5. Once, the PrPro trial was very crippled, but had no watermark. No more. No crippling, and still no watermark. The trial for PrE is far less crippled, but does have the watermark. We do not know what changes might be coming with the trial of PrE10. We will just have to wait and see. One great option that Adobe offers is the 30-day, money-back guarantee. If you buy Premiere (either flavor), and use it for 29 days, but do not like it, then you return it for your money back. This is the full-paid version (both flavors) with nothing crippled, and no watermark. Not that many companies make such an offer. Basically, on can use the trial for 30 days, to see some of the powers of the program, and then buy it, and try it fully for another 29 days. If not completely satisfied, they get their money back - essentially a 59 day trial.
    Were I doing AVCHD, I would definitely look at buying PrE 9, and giving it a 29 day shakedown. The only caveat is that AVCHD requires a lot of computer "horsepower," and not all computers (especially if more than a year, or so old) are up to that task. I find it amazing that a consumer format, like AVCHD, requires more computer power to process, than most professional formats, until one gets up to, say RED 2K/4K. However, that is the nature of the H.264 CODEC, and by that, I mean all H.264, not just the AVCHD version.
    Good luck and happy editing,
    Hunt

  • Quality issues when importing still images as frames for animation

    hello,
    i've imported roughly 600 hand-drawn and scanned (600 dpi) images as frames for video. the images themselves are really crisp and perfectly how i want them to appear. i've imported each to play for 2 frames then move to the next. once done, i save this video file as an .avi. i then repeat the process in order to layer the video (using Calculations filter) over and over again, to fill up the screen with overlapped, layered animations. in theory, these layers should all remain crisp, just like the scanned images. i was under the impression that the standard Export... > Movie... .avi file is essentially lossless and is best for editing, however when my process is completed, the final product is muddy, grainy, and pixelated. i'm not sure where i am going wrong, as i've actually done this process before with success.
    is there a way to specific the working file as "high definition" or something similar so that the quality is just as crisp as the scanned images i am using as source
    any help is appreciated - i am completely self taught in video editing and it is really bugging me that the file output is not how i envisioned.
    thanks,
    DB

    I note you specified that the images were 600 dpi.  The dot per inch are an issue only for printing a hardcopy.  For video work, the issue is the pixel dimensions and the pixel aspect ratio. If your image is 600 pixels by 400 pixels with a PAR =1.0. If your sequence is 1440 x 1080 with a pixel ratio ratio of 1.33, then the images must be the same and PrPro must scale up the image.  You can get good images from imported stills in PrPro. I prefer to rescale my images using Photoshop.  I am told that the scaling algorithm in PrPro has been improved.  But regardless, if you are scaling up, you will see degradation becauae Prpro has to interpolate between pixels to fill the video frame.

  • Help: Tried using disk install to erase and reinstall mac osx

    Could someone please help me. I just bought a second hand macbook pro off someone and upon recieving it realised they hadn't erased everything and their user account was still set up and active as administrator. This means i'll have issues down the track doing updates etc.
    I googled how to hard reset the computer to start from scratch and followed steps. Basically they were
    1. Restart computer whilst holding down the command and r buttons (which I did)
    2. When the wifi connection box comes up connect to reliable wifi (done)
    3. Then it said go into the disk utility and erase the mac os extended disk (the problem here is 1. the steps didnt specify that it should be the macintosh HD disk erased and 2. It should be the mac os extended (journaled) version, i've just fogured this out after a lot more searching as to why the reinstall of mac OSX wouldn't then work)
    now i'm freaking out that i've done irreperable damage given that the mac OSX base system (mac OS extended (non-journaled)) has been erased. Can anyone please tell me if this can be reinstalled? Or what I should do next?

    Afoster88 wrote:
    ...Mac OS Extended' and 'name: mac OS X Base System' both greyed out along with the erase and security options (The option to erase is unavailable, so im assuming it means the mac os extended has been erased in this partition) (capacity: 1.39GB, available: 224.7 MB, used 1.17GB)
    whereas in the macintosh HD partition nothing has been greyed out (so the option to erase is there, which im assuming means it hasn't been erased)
    (capacity: 319.73GB, available: 319.3 GB, used 425MB).
    Does this help explain the situation?
    That does help. The reason why the Macintosh HD partition is the only one where nothing is greyed out is that that's where your new OS X installation should be targeted (note that it's the only partition with room for a full OS X installation as well as your own files and applications). The option to erase is available in case you want to, for some reason, erase it again. Remember, you're booting from the Recovery HD and that's a partition on your HD too. You aren't allowed to erase the partition you booted from (hence, it's greyed out), and, since it's normally hidden, as are others, such as the EFI, it shouldn't be messed with anyway.

  • IMac Memory Issues: "Your Mac OSX Startup Disk Has No More Space Available"

    Hi all,
    I've done some extensive searching on my issue, and haven't been able to find a solid solution.  I was hoping that if I shared my specific problem, it might shed some light on what is going on.  My OS is current:  10.8.2  with plenty of HD space (over 250 GB) and 4 GB ram.
    Over the past couple of days, my iMac has become very slow and laggy.  Most times I will eventually get the message:  "Your Mac OSX Startup Disk Has No More Space Available".  This is after it has been lagging for quite a while, sometimes several hours.
    I will restart, things will be sufficiently fast for a few minutes, but once I start working in any application (including any browser, or adobe software) it starts to slow down until it is eventually to a crawl, with the spinny wheel showing up often, even when only one application is open at a time.  It doesn't take more than several minutes to start slowing down.  Even simple things like hovering over the dock start to really lag, or opening my applications folder or System Preferences can take upwards of 15-30 seconds, even several minutes sometimes.
    Here's some steps I've taken so far:
    -  Checked the activity monitor and system memory seems fine.  No single app takes up more than 7% or so of memory at any given time.  1.65 GB active, 1.64 GB inactive, about 700 MB wired, free about 4 MB.  VM size is 247 GB, CPU also seems OK:  (%user around 10-20%, %System around 10%, Idle around 70-80%).  No single app seems to be taking up an excessive amount of Real Memory.
    -  Permissions repair (It found some things to fix, but never completely finished, seemed to freeze after several hours, tried it several times)
    -  Checked disk for repair (no problems found), did the S.M.A.R.T check and ran tests again using Onyx.
    -  Re-indexed Macintosh HD
    -  I saw a suggestion to reset the PRAM, so I did that.
    I do have the system backed up via Time Machine.  Suggestions for further action are very much appreciated!

    Ok, thanks.  Here's a screenshot from during when it was running to a near halt (took me a while even to take the screenshot):
    Here's a second screenshot after restart.  All I did was open Chrome to post this:
    At this exact moment I have about 500MB of memory free, but I have been watching it slowly count down starting from 2GB free when I first restarted.  So far it is running smoothly, but I am guessing that it will start to lag again once the free memory dials down.
    In case there is any correlation:  I happened to have a strange issue with my internet connection.  My router seems to be working fine, and I have wi-fi connected around the house.  However, I did have my iMac connected via ethernet cable, and the wired connection was not working (was not finding a DNS address), but when I go to Wi-fi, it works.  Again, could be totally unrelated, but it started just before the slowdown.

  • Core duo 2 ghz: Mac OSX cannot be installed on this computer

    My intel core duo 2ghz macbook pro will not accept the instal of Leopard.
    getting this error from the CD boot
    "Mac OSX cannot be installed on this computer"
    "restart"
    I have confirmed this Fujitsu drive is formated GUID.
    A Tiger install disk allows booting and Tiger install.
    Whats the scret handshake to get this Leopard install to happen? Any help is appreciated.

    What is the source of the DVD? Retail? DVD from a different computer?
    Stedman

  • Install extensions all users silently - Mac OsX

    Hello,
    In our organization we need to customize Firefox the same way for every single user meaning that from time to time it's needed to add one or more extras for everyone. Every time we need to do this we have to install individually the extra in every user.
    What i need is a way to silently deploy the xpi file. The OS from the computers is Mac OsX Yosemite and the firefox version is 36.0.1 (we need to stick to this version).
    Thanks in advance,
    Gonçalo Catarino

    Hey there!
    I'm not sure if you are aware, but mozilla makes a version of Firefox just for deploying in enterprises and organizations. https://www.mozilla.org/en-US/firefox/organizations/
    I'd suggest checking it out. Also, there is a very helpful mailing list that can assist you with deployment questions.

  • Imac g4 only boot up to  mac osx login screen ,then just sit there , did the fsck .

    THIS  IMAC  G4  FAILS TO COMPLETE THE STARTUP PROCESS.
    CAN GET IN SINGLE  USER MODE  AND RUN  FSCK  ETC.
    EVERY  THING  LOOK NORMAL.
    LOOK S  LIKE A NORMAL BOOT APPLE  LOGO   AND PROGRESS  MARKER.
    THEN  THE  MOUSE POINTER  TOP LEFT  CORNER  AND BLUE  BACK ROUND SCREEN.
    WITH  BOX IN THE MIDDLE OF THE SCREEN  WITH  "MAC OSX"
    STOPS  RIGHT THERE ,
    NO OTHER MESSAGES   .
    THE MOUSE  CURSOR MOVES .
    LEFT IT FOR HOURS .
    THANKS  IN  ADVANCE  EVERY  ONE.

    @a brody thanks  for  CAPS tip , new to apple  etc  "when i started in 73 did not have  low case" guess its stuck with me all caps.
    yes we  have some applications on  the disk and data, like final  cut pro,   it worked perfect until  3 days  ago.
    @Limnos Safe Mode ,  did  try and held it (shiftkey) down from beep thru the boot logo box  MAC OS X,
    no safe mode appeared. did  try  this  a number of times.  took some time to start up.
    I am familiar with UNIX system but  not with MAC  OSX 10.4
    Also renamed the .globalpreferences.plist  to .globalpreferences.dead  in directory /library/preferences/
    made  no change ,still booted to blue screen cursor in corner with white box center screen MAC OS X in large letters .
    The mouse can move the pointer around ,click it on the white  box the colored busy circle  appears.
    It just sits there  for hours.

  • Hello, I have installed a new Laserjet Pro M1217nfl using Wi-Fi. My laptop prints everything e-mails, Word documents etc. My iPad 3 (latest issue) only prints documents using Wi-Fi so has clearly recognised the printer. How can I prin e-mails using iPad 3

    Hello, I have installed a new Laserjet Pro M1217nfl using Wi-Fi. My laptop prints everything e-mails, Word documents etc. My iPad 3 (latest issue) only prints documents using Wi-Fi so has clearly recognised the printer. How can I print e-mails? Thanks.

    In the email you want to print, on the top right there is an arrow. Click that and an option should appear that says print. That should work. Have you already tried that?

  • I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my p

    I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my paid plan in two computers?

    Hi Susan,
    Please refer to the help document to fix this issue:
    Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
    You may also refer to the thread as below:
    creative cloud software says my free trial has expired, but I have a paid subscription
    Regards,
    Sheena

  • I have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder.

    i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!

    mcbsousa wrote:
    hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
    Sending by Dropbox where, To who, to what computer? As your does not start up.
    You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
    Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X.

Maybe you are looking for