CS5 issue - Text not keeping Vector format when saving as PDF

Hi everybody,
I am very frustrated right now. I am working in PS CS5 in Windows, and I cannot get the text to keep the raster format where it's cleaner / clearer, and can be highlighted, searched for, etc.
What's really puzzling is that it will work sometimes, but other times it will not, and I'm not doing anything different. Some text layers keep the vector format, and some do not. I've searched, and the only solution I see is for older versions of PS where it just says to select the "keep vector format" checkbox, which is not in the save options in CS5.
Can anyone help me out with this? Any assistance would be much appreciated!!
Trevor

Hello!
Yes, faux bold is an effect on the text that can't be vectorized.
You'll need to change your font to another one that has a "real" bold option.

Similar Messages

How to keep crop marks when saving as PDF

In Illustrator CS5, I have some artwork which has 3mm bleeds all around. The printing shop requires me to provide the artwork with the bleed and also the crop marks showing as well in PDF format. But whenever I save as PDF, Illustrator doesn't show the crop marks I have made. I've tried selecting print trim marks in the save as dialog boxes, but this only puts marks right at the edges, after the bleed areas, making the trimming marks incorrectly placed. I'm pulling my hair out!! Please can someone tell me what I'm doing wrong.
Thanks in advance!!
Joe

That didn't work for me. In fact, the only way I could get it correctly was to enlarge my artwork to extend over the artboard and then when saving as PDF to tick the printer trim marks boxes. Not as easy or straightforward as with a crop mark, but it seems to be working now.
Thanks anyway for all your input!

Text is getting cut off when saving a PDF from Photoshop CS 6

I've begun to run into an issue quite frequently that I just cannot find a work around for. The first image shows what it looks like in Photoshop:
Then this is what it looks like in Adobe Acrobat after it's saved from PS:
You can see a whole swath of text is just missing. I've tried everything I can think of to get it to save correctly. This is a high resolution image, exported at press quality.
Please help.

I've played around with the PDF settings, and nothing seems to work. Here's what I'm using now:
As for the font properties, this is what Acrobat shows after I open the file in there:

IWeb is not keeping pages formatted

iWeb is not keeping pages formatted after I upload and then quit iWeb. When I reopen iWeb the newly created photo album has lost all its photos, and formating is gone. I have not moved the photos from the HD, they are still in iPhoto.
All other pages are fine. sample image
Bad Page: http://www.architecturephotographer.com/Picture_9.png
Fine Page: http://www.architecturephotographer.com/Picture_10.png
Message was edited by: Tom Bliss
Message was edited by: Tom Bliss

Roddy,
That did it. It took a few times, but it seems to be working fine now. I deleted the photo album, quit iWeb, deleted the "Folder" /Library/Preferences/com.apple.iWeb.plist, Restarted.
Opened iWeb, then quit it. Then deleted com.apple.iWeb.plist, restarted. Opened iWeb, added the photo album back, published it, saved, quit. And when I reopened iWeb the album was still there. Also iWeb is running faster.
Thanks Roddy.
Tom

Why does notes keep shutting down when I scroll up or down and when I try to add a note?

Notes keeps shutting down when I try to scroll up or down the list an even if I try to add a new note.

Please refer to the followibng link for the possible solution.
http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html

How can I keep the formatting when converting from Word to pages?

How can I keep the formatting when converting from Word to pages?

Use only formatting that is supported (in the same manner) in both applications. You'll need to find which that is through trial and error. Beyond those formatting options, you'll need to do some corrections, as Fruhulda suggests.
Regards,
Barry

Incorrectly coloured text when saving to .PDF using Photoshop CS4

I am using Photoshop CS4 on Windows 7, and have designed my own business card.
When saving to .PDF to send to printers I am finding that a small section of text is saving with a white section to it, for example out of the 3 lines of text on the card the bottom left hand corner of the & sign I have in the design is coming out white, the rest of the text is a golden colour.
I have tried searching on this forum and on google but can't seem to find anyone with my actual problem so unsure where to go.
Any help much appreciated.
Thanks

Mylenium wrote:
Well, you could change the native text color instead of using layer styles, could you not?
Mylenium
Or make the Type and Hyphen layers into a single Smart Object and clip a yellow layer to it.

How do I maintain column formatting when converting from PDF to Excel?

How do I maintain column formatting when converting from PDF to Excel? All info is no longer on the lines or in the columns they started out being in? Any help would be appreciated.

Sara,
Perhaps I am expecting too much from Adobe ExportPDF. The reason I subscribed to this service, for which I pay a yearly fee, was that I need a way to convert scanned and digital documents to Word &/or Excel. I read the link you included but to be candid the more I tried to understand what was written the more confused I got. The process should not be this difficult. Currently I am using a NEAT scanner to create PDF documents of whatever I scan. After I changed the OCR setting on Adobe ExportPDF the output was much better but not to the point it was usable as it was. Information that appears to be lines and columns are sometimes not recognizing two columns and just putting them together in one. Obviously not usable. The other thing it does is bunch numbers that appear in a column that are just a bunch of numbers that I have no way of fixing.
Please let me speak to someone who can help me. Right now I not getting anything of value in my paid subscription.

Pictures are not shown when saving to PDF. Cannot Preview Print Job.

Help! Pictures are not shown when saving to PDF. Cannot Preview Print Job.

I guess you need to fix it
Or if you would like some help provide some information - there are no mind reader supporting this forum and we can only work with the information you give us - right not that is "it does not work"
iPhoto has no "save to PDF" function - exactly what are you doing? and what exactly do you want to do?
LN

Error message when saving a PDF to PNG: Error attempting to write file.

I get an error message when saving a PDF to PNG. JPG and TIFF works, but no PNG.
Disk space is sufficient! 100GB of 250
A few weeks ago it was no problem to save as PNG. But now! (Perhaps from last update?)
Messages:
When clicking "Ignore":
Adobe Acrobat XI Standard
Version 11.0.09

I have this issue too, but my colleagues do not have this issue(we have same Acrobat Pro 11.0.09). I am sure this issue happens only you updated to 11.0.09, because when you use Windows Restore back to 11.0.08, no issues.

When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF?

When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF? Currently when I have a Framemaker book that I want to save as a PDF, I choose Save Book As and then choose PDF for the file format. A dialog box comes up in which I can choose the Bookmarks tab and choose which tagged content I want to be made into bookmarks in the PDF file. What if I would rather have the filename of a document rather than the chapter title be a bookmark in the PDF? Is that possible? Where would I choose that option? Thanks!

There are two ways that you could do this. You can either use postscript text frames and enter the correct pdfmark entries to show the file name with the corresponding actions (i.e. where to go in the PDF) or you can use hidden text in FM and the "Filename (Short) " variable in a unique paratag to be picked up by FM's bookmark creation.
To go the pdfmark route, see http://www.pdflib.com/fileadmin/pdflib/pdf/pdfmark_primer.pdf for details and also consult the Adobe Pdfmark Reference manual (http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdfmark_reference.pdf).
The hidden text route would use FM's Color Views to specify a colour as Invisible. This will make the content visually disappear from the screen (and any output), but FM will still be able to read the contents of any text that is coloured with the Invisible colour(s).
1. Pick or create a colour that you want to be invisible. [Magenta is usually a good bet and stands out visually].
2. Set that colour to be invisible in View 1 and visible in View 6. [you can use the shortcut <esc> v 1 and <esc> v 6 to toggle between the views.]
3. Create a paratag to use for the filename and set the font colour to use the invisible colour.
3. In the title of each chapter file, drop an anchored frame that is set to be outside of the text frame [so it won't interfere with any other content].
4. In that AFrame, insert a text frame and use the invisible paratag defined in step 3.
5. Insert the Filename (Short) variable in that text frame.
6. Repeat steps for all files to be included in the bookmarks.
When creating the PDF bookmarks, select only the paratag used for the invisible colour.
Don't forget to toggle the View to be invisible (i.e. <esc> v 1 - this also works at the book level for all files in the book).

Images fail to appear in pdf when saving as pdf in formscentral

Images fail to appear in pdf when saving as pdf in formscentral, am I doing something wrong?
Image is saved as a jpg and appears on the Formscentral form but is not there on the pdf

Sorted it out the image was in CMYK format, saved it to RGB, and it worked

When saving a pdf the objects on the page appear offset of the page boundries.

This happens mostly in illustrator but it just happened again to me while printing a .ps booklet out of indesign and converting to a pdf using distiller.
See the image below:
The left shows my InDesign Document. On the right is the pdf that results from the save. As you can see the page boundaries are being completely disregarded when saving the pdf and everything is equally shifted down and to the right.
Here is an example of me having the same problem in illustrator:
As you can see there is sometimes zero correlation between what is on the artboard and what page the objects end up on in the pdf.
This problem also has another strange symptom, it seems to have to do with dragging images from firefox onto an artboard in illustrator. The image is place automatically in the center and all objects in the file move together in one direction. see before and after photos below:
Before:
After image dragged in:
You can even continue to drag images in and it will move in the same direction the same amount every time:
I'm running Adobe CS6 on OSX 10.9.1.
Thanks in advance!

In so many words: We can't know. You have not provided any details about your exact settings, what version of Acrobat, your placed images, color settings, color profiles and a million other things including perhaps providing your test fioles for inspection by other people. That aside simply ask in teh relevant ID/ AI/ Acro/ PDF forums. This place here is a dead place and only meant for general sales, install and activation questions, not specific workflow questions.
Mylenium

Gaps in-between livepaint shapes when saving to PDF

Im using CS6 and when saving to PDF my live paint objects have a slight gap inbetween the shapes in the live paint object. They do not appeare in the illustrator file or when saved as jpeg, png, etc only PDFs. I have been using Illustrator for a couple years now and this has not happened in previous versions I've worked with (CS3, 4, and 5)
Thanks

The thin lines around the rings are an artifact in pdf preview. Thi si the saem problem http://helpx.adobe.com/indesign/kb/thin-white-dark-lines-stitching.html
You may be able get rid of them by changing your acrobat settings such as turn off smooth line art.

CS4 - Missing buttons in dialog when saving as pdf

Hi Folks,
I'm wondering if anyone else has come across this problem, or perhaps it's just an issue with my installation. I get occassional strange issues when saving as pdf, though i think it happens in other cases too. In the dialog (after choosing the file name and clicking save), some of the buttons are missing (see attached file). The title bar is also sometimes missing the title, but in the attached file it isn't. Alt-tab functionality in windows is impaired when this is happening, I can't launch ctrl-alt-del, etc. Lots and lots of strange issues until i manage to kill illustrator and start again.
This doesn't only happen when i'm trying to save as pdf - sometimes it happens upon launch of illustrator.
anyone else have these crazy issues, or just me?

Thanks for your reply. I actually don't think the problem has anything to do with actually saving as a pdf per se, since it happens in other situations too. You'll notice that the Save buttons at the bottom were missing in the first image i posted. I'm posting another image of how the dialog *should* look.
Remember, there are also a myriad of other problems that come along when this happens, indicating a bad interaction with Windows somehow. Alt-tab functionality is messed up, i can't use ctrl-alt-del, i can't close the program, etc.

CS5 issue - Text not keeping Vector format when saving as PDF

Similar Messages

Maybe you are looking for