CS5 issues with mandatory roaming profiles

Hi,
I have seen lots of problems reported with using CS5 on networks with mandatory roaming profiles but not found any answers yet?
Has anyone managed to get it working yet?
We have gone to using standard network default profiles but it is not where we really want to be.
Regards
Darren

Dreamweaver is designed to work in a multi-user environment, and it creates a configuration folder for each user in that person's application data folder or library. You need to contact Adobe technical support if you need a different setup.

Similar Messages

Issue with Creating Forecast Profiles/Forecasting

Hello Experts,
We are facing an issue with creating forecast profiles.
We have two FYVs defined in our system, one with 52/53 fiscal weeks (Fiscal Variant W1) and the other with 12 fiscal months (FYV M1), Our storage buckets profile (STP) uses W1, since we have many dataviews that use W1 as the FYV in the attached Planning buckets profile(PBP). We also have dataviews that display in fiscal months (use FYV M1 in the attached PBP), data from Fiscal weeks will be aggregated and shown in Fiscal months . We need to do forecasting using FYV M1, that is forecast in Fiscal Months , but since the storage bucket profile has W1 which is used in the Planning Area config. We are unable to create any Forecast profiles with FYV M1 . Please note that we cannot use M1 in STP because when we used M1 in STP, we could not create dataviews in fiscal weeks (using W1)
1. Is there any way we can forecast using M1 while having assinged W1 to the Planning area/STP ?
2. OR we are willing to assing M1 to PA, provided we can use W1 in some of the dataviews, unfortunately we were unable to do this, though the vice versa is possible i,e. we could have W1 in STP and M1 in some of the related PBPs/ Weekly Dataviews.
Please let me know if any of these are possible or if there is any alternative way to do forecasting in Fisc Months.
Thanks
Tej

Hi,
You are correct, the Storage bucket profile always has to be at a detailed level. Time bucket profile can be at higher levels like monthly, quarterly etc.,
Coming to the root of your problem, which is you are unable to forecast at a level other that what is specified in your Storage bucket profile, unfortunately the answer is no.
You can do a forecast only at the level at which the data is stored and not at the level at which the data is viewed.
One work around for this is to create an additional planning area with the same MPOS and this addl PA can contain only those bare minimum KF required for your forecast. After you generate your forecast, you can copy it to your Weeks based PA and then proceed from there. This copy of KF between PA is much faster as it will happen at LC level and should not cause time delays.
NOTE - You have to exercise caution when you are using 2 periodicities i.e., weeks and months, if you are using standard SAP calendar then you are good to go. If you are creating custom Fiscal variants pls ensure the start and end of a month is same in both the weekly and monthly variants. Failing which, there will be mismatch of data between the two dataviews.
Hope this helps.
Thanks
Mani Suresh

VPP Distribution issues with OSX Server Profile Manager

Hi, I have a new issue with my OSX 10.9.5 Server. I use VPP to distribute apps to users devices, when I would add a new user I would send them an invitation message through /profilemanager . All was working well until recenetly , the message still arrives in the users mailbox however when you click the "sign in" link on the "receive apps and books from xxxxx" email instead of opening through the Mac App store app it now opens Safari and connects to the profile manager server , any ideas ? it never has done this before and although I thought it was a new feature or method I can not seem to resolve the issue.

Hi if when you are redirected back to your Mac Server you enter the user name and password of the user you are trying to receive VPP apps for i.e the Open Directory credentials it will then open the App Store providing the credentials are correctly entered so it looks like an additional layer of security. The process is click on the link in the VPP invite email, this takes you to your Mac Server profile manager, log on with your OD account, App store then opens on your Mac like it used to.

How do I find the logon name associated with a roaming profile folder

Hello,
We have Server 2003 R2 Enterprise and Windows 7 Enterprise workstations.
We normally name the profile path \\server\profiles\%username% and that assigns the users logon name to the profile folder.
Someone created a user account and incorrectly named the profile path so the folder name and user logon name do not match. I am trying to find out who owns the folder without taking ownership of the folder (by default, we did not include Administrators in
NTFS permissions).
Is there a way I can find out what the user logon name for the profile folder is without taking ownership of the folder?
Thanks in advance.

if there is a chance that the user/owner is still configured with this folder as profile attribute, check the profile attributes of you users for the user account with the matching profile folder attribute.
check the script gallery, or similar, for a script which will list out all user account profile attributes to a text file, then search/browse that text file for the matching folder name -> user account.
I have some older scripts tucked away which do ADSI queries in VBscript, to dump out the home_folder and profile_folder attributes for every user in our AD. This helps when we are re-shuffling home_folders or profile_folders from one server to another, etc.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

CS5 washed colour issue with EIZO monitor profile

Really weird stuff going on.
At a customer site, we have LR3 and PS (CS5) running.
There are colour differences between what we see in Bridge and LR, and what CS5 displays, even though the colour space (Adboe RGB or ProPhoto) is the same and all other settings are correct (in colour settings and no soft proofing).
Strangely enough, when changing the monitor colour profile (in system prefs) to a non-EIZO one, LR3 and bridge immediately update, CS5 only when you click the window, and then everything looks the same (although not colour correct).
Chang back to the EIZO profile and the PS image looks washed, while the bridge and LR images look right.
The EIZO CG211 is calibrated using the Colour Navigator software.
Any idea's what might be the cause ? We'reabsolutely baffeled.
OpenGL is not active (as this is apparently not available anymore in CS5 'standard').
He used to be running on CS3 and LR2 and everything was fine.
We removed the CS3 as it was a suite (customer did only use Photoshop) and switched to Photoshop only.

Just to give an idea of the difference, I've attached a screenshot of both situations.
It does not matter wether I open the image using camera raw or using LR-> external edit.
Standard profile
EIZO profile

Issue with Data Access Profile

Hi Experts,
Facing issue while using Data Access Profiles:
I have created a data access profile ,giving access to only limited members for a particular model.
While logging in using a particular user id which is assigned to this data access profile I am able to see all the members for which the access is denied
and I am also able to manipulate the transaction data. But in data access profile I have provided only read access.
Recently,the system has been upgraded with a new support package after which we are facing the issue.
Please help us solving the issue.
BPC version: 10.0 NW
SP : 15
Best Regards,
Remya

Dear Ramya,
Again do the setting for data access profile. Sometime it will not refresh.
Regards,
Nanny

Photoshop CS5 issues with..everything

I recently posted a specific question, but it looks like there are more issues then just the original.
Basically, I will be using the clone tool and all of a sudden I cannot change the brush size with my wacom tablet. I have to quit and restart Photoshop for it to work.
If I don't restart it and ignore my wacom tablet, I can not use quick selection keys such as undo. The clone stampe tool won't show the overlay (and yes everything is checked.)
I reinstalled PS CS5 and it was better for a couple days, but now I am running into the same issues.
Thoughts? Who would I even contact for this? It's not a wacom issue and I haven't made any software updates for my MAC recently.
All Adobe producs are up to date.

On and off through history these kinds of problems have been seen (I've seen them myself from time to time).
While it's near impossible to tell what's really gone wrong, VERY often the problems are solved by getting new drivers or system updates that correct the infrastructure on which Photoshop relies.
OpenGL drivers have traditionally been buggy, and certainly we've heard of problems with Wacom tablet drivers. There is also the real possibility that a 3rd party plug-in is at fault.
Thing is, bugs in any of this software can cause corruption in Photoshop's extensive set of RAM-resident data while it's running, which can lead to trouble seen MUCH later than when the problem originally occured - for example your failure to quit bug.
I can only advise checking for system updates, plug-in updates, and driver updates.
I know that in some cases in the past, actually using an older version of a driver (thinking of Wacom, for example) has been advisable.
Keep the faith, it can work right.
-Noel

CS5 Issue with PDF exporting to Illustrator?

Hi all,
I'm having issues exporting PNG files to PDF files from Fireworks CS5. When I export, they're suddenly saving and needed to being opened in Illustrator - which I don't want them to do or have the AI file extension. Is there a setting I can change? I need a "traditional" PDF so I can send to a client who does not have Illustrator.
This issue just started today, and I'm not sure where the source of the change is.
Thanks and I look forward to hearing from you!
Regards,
Darryl

I very much appreciate your help. As you recommended, I tried the conversion without OCR (useful post is here http://forums.adobe.com/docs/DOC-3062) but again with result "the conversion failed because the file is taking too long to process". This option makes the conversion easier but doesn't help in this particular case. This document doesn't contain any pictures so the recognition wasn't so processing expensive to help shorten the time of the conversion.
We are talking about long (hundreds of pages) but simple document formatted as a table. I expected that the conversion to Excel sheet is simple. If the service is so complicated, why don't use some spool, take requests and send notifications about the result. You can have hours for conversion, I don't care.
And, if the service is so sensitive, maybe some list of limitations and to-do's in case of problems could be helpful - the best on the home page of the product to be informed before making the order. It isn't possible to spend many hours on discussions and forums and read about the troubles of another people to find the solution. Maybe could be a fair solution to give a possibility to try your tool for free with some limitations (number of pages, number of documents or something similar).
I am grateful that we found a solution and I can cancel my order and get my money back. Unfortunately, this service doesn't fit my needs.

DW CS5 -- Issues with uploading files to server

Hi everyone -- I recently took over control of a website that hasn't been updated in years. I am in charge of redesigning the site, but need to keep what we have up-to-date until the new site is ready to roll out. I received the FTP info for the server and got site files into local folders so I can make changes. I've made changes to one file (index.html) and am trying to put that file back onto the server; but in the file transfer process, the dependent files do not get uploaded (I get a message saying "'fileName' - same - not transferred"). The one file that I have changed, and Dreamweaver says has been uploaded, is not updating on the web. I checked the file on both my local and remote view and both reflect the changes I have made -- just not the actual site on the web.
I'm sure that's a little confusing, so I'll try to summarize (with bulletts!):
I have correct FTP info to server
I downloaded site files from server to local folders
I edited index page, and put the file to the server
Dreamweaver indicates that the file has been successfully uploaded
Local view shows edits I have made
Remote view shows edits I have made
Other dependent files have not been uploaded ("'fileName' - same - not transferred" error message)
Actual website does not reflect changes made to index page
What am I doing wrong????
Thanks in advance for any help you can provide!

Filezilla is a free, open source FTP client. It's a standard desktop application. An FTP client connects to a server using the File Transfer Protocol and allows you to transfer files up to the server (upload) or download files from the server (download).
Why use a separate FTP client rather then the FTP functionality built-in to Dreamweaver? Because, in my experience, it works better the Dreamweaver's sometimes flakey FTP functionality and it's easier to troubleshoot FTP issues.
In Firefox, to clear the cache, go to Tools -> Advanced -> Click Network Tab -> Click "Clear Now" button. Hit F5 to refresh the page and see what changes (if caching was the issue). If nothing changes then for some reason your files are not being uploaded properly to the server. In that case I'd check to make sure you're loading your files to the correct directory on the server (usually a folder called "httdocs" or "www" - check with your hosting company to amke sure).
Hope this helps.

Cisco ISE 1.2.1 deplyomet issue with Anyconnect and Profiling

Hi All,
We are running cisco ise box in 1.2.1 version wherein I am facing below issue while deployment. We are having two ISE boxes where One box act as Primary Admin,Secondary MNT and Policy Service and Second Box act as Secondary Admin,Primary MNT and Policy Service
1) Profiling of Endpoints - HP Laster jet printer 55XX series and scanner profiling are not happing in Cisco ISE 1.2.1 wherein I have enabled below probes in ISE for profiling
RADIUS Probe
SNMP Probe SNMP Trap HTTP Prob and DNS
2) Any-connect issue - We are using any-connect supplicant 3.0.11042 for wired and wireless user profile in windows 7 enterprises 32 bit machine
- Yellow mark issue -  Once authentication , posturing completed we are getting yellow mark on network drive but still we are able to connect to network
- Network Map Drive issue -  Once authentication , posturing completed we are getting red cross mark on Network map drive and if we double click on that drive then its get accessible and red mark turns in to green.
For that we have already allowed Ip level access to all domain in before logon dacl ( Machine authentication )
That would be really great if any one can help me on the same.
Thanks & Regards
Pranav

Hi Pablo ,
Please find below solutions
Yellow mark issue - - HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NlaSvc\Parameters\Internet. This Service is by default disabled on Windows XP and Widows 8.X operating system. This is only enabled by default on Windows 7 and Windows Vista operating system.
Network Map Drive issue   - Create logon script and deploy it using group policy. Script will check full network connectivity and then map network drives
Regards
Pranav

Photoshop CS5 issue with Mac OSX 10.9.4

I recently bought a 27inch iMac, and booted it up using a time machine back up of my old MacBook Pro (that also ran OSX 10.9.4). Once things were running on my iMac, I tried opening up Photoshop, and this window popped up;
When I closed Photoshop this window popped up;
I did go through all Photoshop files in my finder (both in the App folder and the Library preferences), and changed the permissions, but the issue is still happening, plus other random ones. For example, I can't open a psd file right away. The first window will pop up when Photoshop is booting up, and then nothing happens. I then have to open the psd file again for it to come up. Another example; changes to my workspace don't stay when I reopen Photoshop. Lastly some of the drop down menus won't work when I click them. I have to click the photoshop icon down on my dock, and then the menu will appear.
All my other Adobe products are working just fine. I would want to reinstall Photoshop, but I don't know how to do that when the iMac doesn't have a disc drive. Also my old MacBook Pro can't connect to the new computer in order to use it's disk drive.
Is there a fix for this issue, or do I need to reinstall Photoshop again? If so, how? Thanks in advance!

As the error says - you need to fix the permissions on your preferences folder, and it sounds like you may be missing part of the Application Support folders or have a permissions problem there as well.
It sounds like something weird happened to your system that messed up permissions -- we see that happen often when people try to use Apple's migrate utilities between systems or disks (it doesn't copy everything, and messes up permissions). Fixing permissions with Disk Utility can help, but you may need to reinstall Photoshop to replace missing files/folders, and you'll still have to fix the permissions on your preferences folder.

Photoshop CS5 Issue with GPU accelaration

I was having gpu accelataration enabled about week ago photoshop gave error that i need to update driver now after updating error it is not detecting my gfx card. According to me it gave error after going some update that was asked by adobe updater after that i was giving error by photoshop. I am running windows 7 64 bit and also adobe photoshops is 64 bit.
I have a dual core intel processor with 4 gigs of ram and 1 gigs of ATI Radeon 4650 HD gfx card.

Try this: Go to ATI's web site and download and install the latest Catalyst driver release, 11.5.
http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx
I'm running that version with Photoshop CS5 12.0.4 on Windows 7 x64 and it provides acceleration with my Radeon HD 5670.
-Noel

Panel Tab issue with mandatory fields

So i have a requirement where i have Jsff page with paneltab and 2 showdetail, on one show detail i further ave panel tab with 5 show detail.
when i commit data on one tab its asking for other tab Mandatory fields and commitng the all tab data.
I did immediated=true on all tab, but it didnt help.
Can someone please help me onthis.
Thnks
RJ

Jaspal
Correct i have two level of tabs
Tab1 Tab2
under tab 2
Tab21,Tab22,Tab23,Tab24,Tab25
Tab21-tab25 have there own Taskflows which used differnt VO(based on diff EO) and 1-2 tab will have Trasient VO
So Tab 1 has Updatable VO with some mandatory Fields. When i come to screen i saw two tabs Tab1 and Tab2
I clcik on Tab 2 i saw Tab 21-25...When i commit some data on Tab21, its asking for mandatory fields of Tab1
I hope i am clear..let me know if you need some other info
Thanks for help
RJ

Photoshop CS5 - Issues with 3D Text and Reppouse

Recently, I downloaded Photoshop CS5. Whenever I try to transform normal text into 3D with the Reppouse feature, I this error:
"Your 3D scene now exceeds the limits of lights and/or textures for the video card's hardware-accelerated 3D Rendering. As long as the limits are exceeding, 3D rendering will be done in software only, and some features (e.g. Reppouse) will be disabled."
If anyone has tips or advice on this problem, please fill me in because I will be gradly appreciate it. Thank you.

1. Yes, many Laptops that have onboard video chipsets are not good enough.
2. Yes, your card does support some OpenGL and in this case this error reveals your card does not support the 2 default Lights that are generated whn creating a Repousse mesh.
3. Repousse requires OpenGL, other 3d functionality dos not require OpenGL
For more info > GPU and OpenGL Support in Photoshop CS5 and CS4
http://kb2.adobe.com/cps/404/kb404898.html
Hope this helps

Sql Server Connectivity issue with ODI Data Profiler

Hi all,
To profile data from SQL Server Data source, i had created a ODBC connection(using Windows NT authentication) in the system and it was successful. Created a connection with Type ODBC connection in Loader Connections along with System name, Port No and DSN Name. But while trying to connect the database it is throwing an error as Authentication Failed. Please guide me.

ODI's DP does not support the use of sourcing data on the ODBC data source. You must extract to a file, and use the file as the input.

CS5 issues with mandatory roaming profiles

Similar Messages

Maybe you are looking for