CS5 Panel Developer Guide?

I am ready to upgrade to CS5, but I have a couple custom panels that I cannot do without.The CS4 panels made with Flex will not work at all.
When can we get a panel Developer's Guide for CS5?

The CS5 SDK is not intended to be used for panel development but mostly for plugins and tools.
The Adobe proposed solution for Panel Development is using the new Flash Builder 4 (formerly Flex Builder) and some XMP extensions already upgraded for the CS5 release. The free Flex SDK may also be used for the task but I think is more cumbersome.
I downloaded the CS5 Panel Guide and the others SDKs needed. I will install Flash Builder 4 and in few days (to be on the safe side with testing) I should have a CS5 compatible file info panel for Expression Media.
Thank You to all for the help. I will make the panel available soon, with source code, on Adobe Exchange.
Massimo Novi

Similar Messages

  • CS5 Panel Developer Sample is broken

    Hi,
    The PerLayerMetaData sample in the CS5 is broken.  The existing .SWF and .JSX work fine, however, if one tries to recompile the. MXML to get the "same" .SWF, the panel does not work properly.  Typing in some text in the "Description" text area then clicking the "Apply Changes" button breaks the panel. By that I mean the "Apply Changes" button gets stuck in the down position an the panel no longer updates in any way.
    I believe its from an incorrect CSXSLibary-*.swc  file that is part of the panel dev sdk download.  In another discussion , it was suggested to use the CSXSLibary.swc from the Creative Suite  SDK, but that does not fix this particular problem.
    I am compiling the sample with Flex Builder 3, under Windows.
    Please please Adobe, give us a CSXSLibrary.swc for  Photoshop CS5 that works!    The sample works great in CS4.

    There are two. One for using with Flex 3.3 SDK and one for using with Flex 3.4 SDK. Those are the only two SDK's we support as of now.
    In your project right click and select Properties.
    Click Flex Compiler and make sure you are using Flex 3.3 (or Flex 3.4)
    If you get Flex Builder 4 you will need to get the 3.3 (or 3.4) SDK and install manually via the Configure Flex SDKs button.
    Click on Flex Build Path and then the Library Path panel.
    This will show you the current Flex SDK in use and the swc that you are using.
    I would do a File > Refresh or Right click on project and Refresh after any changes you make.
    http://opensource.adobe.com/wiki/display/flexsdk/Download+Flex+3

  • CS5 Getting Started Guide - Stuck - Framework not found.

    I am using Xcode 3.2.3.
    I am on page 26 of the "Getting started with the Adobe Indesign CS5 Products SDK" guide. I follow the instructions up to point 7 on page 27.
    Then, when I build the project I get the following error: (http://codepad.org/OcB0myiH)
    Ld ../Release/SDK/InDan.sdk.InDesignPlugin/Versions/A/InDan.sdk normal i386
    cd /SDK2/build/mac/prj
    setenv MACOSX_DEPLOYMENT_TARGET 10.5
    /Developer/usr/bin/g++-4.0 -arch i386 -dynamiclib -isysroot /Developer/SDKs/MacOSX10.5.sdk -L/SDK2/build/mac/prj/../Release/SDK -L/SDK2/build/mac/prj/../release/packagefolder/contents/macos/libs -L../../../build/mac/release/packagefolder/contents/macos/libs -L/SDK2/build/mac/prj/../debug/packagefolder/contents/macos/libs -L/SDK2/build/mac/prj/../release/packagefolder/contents/macos/libs -L/SDK2/build/mac/prj/libs -F/SDK2/build/mac/prj/../Release/SDK -F../../../build/mac/release/packagefolder/contents/macos -F../../../build/mac/release/packagefolder/contents/Frameworks -F/SDK2/build/mac/prj/../debug/packagefolder/contents/macos -F/SDK2/build/mac/prj/../release/packagefolder/contents/macos -filelist /SDK2/build/mac/prj/build/InDan.build/Default/Release.build/Objects-normal/i386/InDan.sdk .LinkFileList -install_name ./InDan.sdk.InDesignPlugin/Versions/A/InDan.sdk -mmacosx-version-min=10.5 -dead_strip -no_dead_strip_inits_and_terms -Wl,-executable_path -Wl,../../../build/mac/Release/packagefolder/contents/macos/ -framework Carbon -lPublicPlugIn -lPublicPlugIn -lPublicPlugIn -framework InDesignModel -framework InDesignModel -framework InDan.sdk -framework InDan.sdk -single_module -o /SDK2/build/mac/prj/../Release/SDK/InDan.sdk.InDesignPlugin/Versions/A/InDan.sdk
    ld: framework not found InDan.sdk
    collect2: ld returned 1 exit status
    Command /Developer/usr/bin/g++-4.0 failed with exit code 1
    I have been trying to solve it for 5 hours now. It can't be that difficult.
    Can someone help me out please.
    Thanks

    That's an odd looking error to see when creating a new project.
    Did you create the project with Dolly?
    Dolly should have set this up correctly.
    Look in your Xcode project.
    In the Groups & Files section you should have a file:
    ????NoStrip.cpp
    where the ???? is the short name that you provided in Dolly.
    That contains the method DontDeadStrip() that the compiler is looking for.
    If it's not in the project, check your source folder and drag the ????NoStrip.cpp
    into your project.

  • BLOBs Oauth2 in New RESTful svcs developer guide

    Hi, All,
    In case you are not aware, there is a new RESTful Services Developer Guide  -- but it is in the download for the Listener 2.0.2!!  Not sure it is posted also on the Apex 4.x documentation.  It should be.  It has a nice walk-through for creating an "Image Gallery Application" along with the RESTful services required to upload and download images--but it would have been much better if done differently (see comment below).  I am needing to adapt this to just download images from an existing BLOB object.  It also has a demo walk-through of OAuth2.0, however, I wish they would do a better job of explaining where the 'https://server:port/i/oauthdemo/gallery.html' comes from or is created.
    My problem with the documentation is that it is a 'tutorial' but really should be broken down so that the user has a better UNDERSTANDING for the whole process.  Why do an application that does a POST and GET at the same time.  The tutorial idea is great, but break it down to 2 separate parts so you understand the PUT part for those who are needing to upload images  and do a separate part for the GET for those like me who just needed to see how to do a GET with a header parameter ID and render the BLOB image. 
    The OAuth2.0 example has a similar issue but in this case it is too tied to the example tutorial and there is no explanation of where the "Redirect URI"   'https://server:port/i/oauthdemo/gallery.html' comes from.  (maybe I am missing something?)
    If anyone has success with these demos and applying them beyond the specific tutorial please share!!
    Pat

    The alter move table with the LOB storeage clause will rebuild the table and the LOB segment storing the LOB column data inor out of line as specified in the command. Rebuilding the table is the only way to move the existing inline data to being out of line.
    HTH -- Mark D Powell --
    Edited by: Mark D Powell on Aug 31, 2011 8:24 AM

  • Status of ADF BC / JSF Version of Developer Guide?

    Can anyone provide an update on when this will be available (Developer guide based on ADF BC and JSF vs. Toplink)? I'm EAGERLY awaiting - this will be very helpful.
    I was able to download the SRDemo app based on ADF BC / JSF - this is very helpful to see some real code examples. For example, I read topics related to programming View Objects and Application Modules, but viewing the actual code examples for how to call these methods was invaluable. Any other sources for ADF BC / JSF Technology scope code examples greatly appreciated.
    Thanks

    Hi,
    I think this information is what you can already get from the SRDemoBc application. I remember from an internal training i delivered that the login is performed by a ViewObject that is acting as the root VO for all application VO. In addition, to store global values, a VO is created that doesn't use queries.
    Note that I am not really a suppoter of applications that handle the login logic in itself. Its good for demos, but in praxis they should use either JAAS or J2EE authentication to fit into an overall enterprise security strategy.
    Frank

  • LCCS Developer Guide not available in PDF format?

    When I click on the pdf link I get: You are not permitted to perform this operation.

    I click on the LiveCycle Collaboration Service developer guide link on
    http://www.adobe.com/devnet/flashplatform/services/collaboration.html
    That takes me to http://learn.adobe.com/wiki/display/lccs/LiveCycle+Collaboration+Service.
    I click on the PDF Version link there, and it takes me to http://learn.adobe.com/wiki/spaces/exportspace.action?key=lccs,
    which says "You are not permitted to perform this operation."

  • Oracle Database Express Edition 2 Day Plus Java Developer Guide??

    I posted in the JDeveloper forum, as well as sending email via your feedback link found on the tutorial but I am a little disappointed by this:
    The Oracle® Database Express Edition 2 Day Plus Java Developer Guide has some errors in it.
    in Windows, I simply chose, start
    -> programs -> Oracle Database Express Edition -> Go To Database Home Page -> click documentation from the link -> and run the Oracle® Database Express Edition 2 Day Plus Java Developer Guide tutorial.
    the problem is there are mistake(s) in the tutorial, for example: section 4-19 is this:
    "The complete code for the method should now be as follows:
    public boolean authenticateUser(String userid, String password,
    HttpSession session) throws SQLException { "
    it needs to be this:
    public boolean authenticateUser(String jdbcURL, String userid, String password,
    HttpSession session) throws SQLException {
    Also:
    there is no mention that :
    the port and SID must also be passed in the
    ds.setURL(jdbcUrl) found in the authenticateUser() method, or an exception is thrown. This differs from value of the jdbcUrl string found in the getDBConnection() , which makes it hard to figure out
    The tutorial is great even if it doesn't work out of the box, but I am disappointed that errata or completed code for this project is not available, especially when you explicitely point to it via the steps mentioned above.
    Thanks,
    Patrick

    The tutorial seems to be using the old JDeveloper 10.1.2.
    If you are aiming to learn JDeveloper then just use the tutorials linked from the JDeveloper home page.
    http://www.oracle.com/technology/obe/obe1013jdev/index.htm

  • Where I can download the bundle of "Java Plug-in 1.4 Developer Guide"

    I want to download all the doc of "Java Plug-in 1.4 Developer Guide" on
    http://java.sun.com/j2se/1.4/docs/guide/plugin/developer_guide/contents.html

    You can download the whole JDK documentation or here: ftp://ftp.java.sun.com/docs/j2se1.4/developer_guide.pdf

  • Downloading  of Oracle 10g Reports developer guide

    I have to download Oracle 10g Reports developer guide in pdf format.
    so can you please send me exact URL of it .

    Hi,
    Building Reports:
    http://download.oracle.com/docs/cd/B25016_08//doc/dl/bi/B13895_01/B13895_01.pdf
    Publishing Reports to the Web: http://download.oracle.com/docs/cd/B25016_08//doc/dl/bi/B14048_02/B14048_02.pdf
    Regards
    Rainer

  • File Upload Example in ADF Development Guide

    I tried to upload a file using ADF as described in Development Guide. I have taken a <af:inputFile> component as described.
    <af:inputFile label="#{res['srfileupload.uploadlabel']}"
    valueChangeListener="#{backing_SRFileUpload.fileUploaded}"
    binding="#{backing_SRFileUpload.srInputFile}"
    columns="40"/>
    [Page 620]
    Now, what is the type of that variable "srInputFile" in the backing bean?
    Is there any full written code for this ADF Development Guide example? Where from can I download that?

    All the needed code is on page 617 of the ADF Dev Guide 10.1.3
    http://download.oracle.com/docs/pdf/B25947_01.pdf
    It is also located in the SRDemo ADF Tutorial support files
    http://download.oracle.com/otndocs/products/jdev/10131/ADF_tutorial_setup.zip

  • 2 Day Plus Application Express Developer Guide - error?

    Good day !
    In "Oracle Database Express Edition 2 Day Plus Application Express Developer Guide" chapter 8 "How to Upload and Download Files in an Application" at the topic "Store the Document in a Custom Table" ( page 8-10, 8-11) is recommended:
    6. Under Source, replace the process with the following:
    IF ( :P1_FILE_NAME is not null ) THEN
    INSERT INTO file_subjects(id,NAME, SUBJECT, BLOB_CONTENT, MIME_TYPE)
    SELECT ID,:P1_FILE_NAME,:P1_SUBJECT,blob_content,mime_type
    FROM HTMLDB_APPLICATION_FILES WHERE name = :P1_FILE_NAME;
    WHERE name = :P1_FILE_NAME;
    DELETE from HTMLDB_APPLICATION_FILES WHERE name = :P1_FILE_NAME;
    END IF;
    7. Scroll up to the top of the page and click Apply Changes.
    After this I receive Error Message:
    ORA-06550: line 6, column 1: PLS-00103: Encountered the symbol "WHERE" when expecting one of the following: begin case declare else elsif end exit for goto if loop mod null pragma raise return select update while with << close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge pipe
    Now I can't find mistake. Please, help me ( if difficulties not so big )
    Winni

    Replace by:IF ( :P1_FILE_NAME is not null ) THEN
    INSERT INTO file_subjects(id,NAME, SUBJECT, BLOB_CONTENT, MIME_TYPE)
    SELECT ID,:P1_FILE_NAME,:P1_SUBJECT,blob_content,mime_type
    FROM HTMLDB_APPLICATION_FILES WHERE name = :P1_FILE_NAME;
    DELETE from HTMLDB_APPLICATION_FILES WHERE name = :P1_FILE_NAME;
    END IF;The second WHERE clause is superfluous.
    Regards, Marc

  • PDF (Oracle ADF Developer Guide 10g Handbook) not found

    Hi all,
    I try to open : http://www.oracle.com/technology/products/jdev/collateral/training10g.html
    to download PDF file [ [b]Oracle ADF Developer Guide 10g Handbook (free)
    JSF, ADF Business Components tech stack.]
    but when i try to click on book link , oracle send me to other subject "Oracle Application Development Framework Developer's Guide for Forms/4GL Developers"
    Please any body help my, because i need this book soooooooo much ASAP

    Dear MarkP
    Have a nice day,
    Thanks for your link but this guid is ( Oracle ADF Developer Guide 10g Handbook JSF, EJB 3.0, TopLink tech stack.)
    What I need is (Oracle ADF Developer Guide 10g Handbook JSF, ADF Business Components tech stack.)!!!!
    BR

  • Java developer guide

    Hi,
    in Documentation Library of Oracle DataBase Express Edizion (XE) there is a documentation "java developer guide part number b25320.01". There are other of the such "java developer guide b25320.01" for begining with Jdeveloper?
    Sorry for my bad English...

    Try our tutorials page:
    http://www.oracle.com/technology/obe/obe1013jdev/index.htm
    And the books on the ADF learning center:
    http://www.oracle.com/technology/products/adf/learnadf.html

  • READ THIS FIRST: Check out the Developer Guide, other forums and Wikis

    The Portal Content Development forum is one of the most-active forums on SDN, and many, many experts read it and can answer your questions.
    Before posting, please check out the following sources of information:<ul><li><b><a href=http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm target="_blank">Portal Developer Guide</a> (2004) </b>and<b> <a href=http://help.sap.com/saphelp_nw2004s/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm target="_blank">Running an Enterprise Portal (developer guide)</a> (2004s):</b> This is THE source for information on portal APIs. All of the public APIs are documented here. </li>
    <li><b><a href=https://wiki.sdn.sap.com:/wiki/display/EP>Portal Wiki</a>:</b> See below.</li>
    <li><b>This Forum:</b> Someone probably has already asked your question. Before adding another post, check if you can find a similar post that has sufficient information to help you.   </li></ul>
    <h3>Other forums</h3>
    <li>Employee self service questions: https://forums.sdn.sap.com/forum.jspa?forumID=267</li>
    <li>Visual Composer questions: https://forums.sdn.sap.com/forum.jspa?forumID=58</li>
    <li>Web Dynpro for Java questions: https://forums.sdn.sap.com/forum.jspa?forumID=52</li>
    <h3>More on Wikis</h3>The recently announced Wiki functions of SDN will, over time, be a great start for getting information about portal development and implementation...
    The main wiki portal page is <a href="https://wiki.sdn.sap.com:/wiki/display/HOME/Portal">here</a>.
    Please read this before asking a question in the forum - believe me, there are not many new questions being asked!
    There is quite a bit of repetition in forum questions, and maybe if people are directed to the wiki page as a first step, it may make it easier to watch this forum.
    The Wiki concept is all about sharing within a community, so feel free to modify the content - more accurately 'our' content - and maybe start some other pages, such as one about modifying logon pages - a fairly consistent topic in this forum
    Edited by: Michael Nicholls on Feb 18, 2009 9:48 AM
    Edited by: Michael Nicholls on Feb 18, 2009 9:49 AM

    Dude thank-you for your wonder detailed knowldge, I have descovered that lets say xp 1700 in a ultra 2 can only handle at the most 143fsb mult at 12.
    Given the settings" irq's are a major",part of directing traffic and power? example:
    Sound blaster Live , uses two irq's most common at"Auto" is, irq 10, or 5, and Sound blaster 16 emulation usually takes irq 5,. I have found that the sound card in slot3 works great , but to do this I had to change the Bio's and assign slot 3 irq 7 . and make sure printer port has share irq enabled
    Problems that accure with bad traffic are like this. Start a dedicated server. minimize than start your game?":censored:  no sound what could be wrong"? Shoot another problem Connection problem?. The computer nerd is getting trouble over the ordeal. ANSWER! IRQ can fix the problem, Study the irq and make changes as you go. "what would it be like with no stop signs,,,that is the same as a irq. with the same knowldge this topic brings IRQ need to be clearly understood.
    I can honestly say my system is error free and running like a dream.
    xp 2500 barton 333
    creative sound 5.1gamers.
    512 mb kingston ram 400 mhz
    boadband either onboard.
    MSI 5700 128 mb ddr
    Setting are:
    163 fsb
    mult of 11
    ddr 333
    video memory clock down to 450mhz
    3d clock to 390mhz
    The delta is a smooth running board also I want to mention to the person with crackling sounds, change the irq like I did, that fix the problem and the power is totaly too good to be true.

  • Error Deploying Sample Portal from Development Guide

    I am going through creating a New Portal from WebLogic Portal 7 Development
    Guide and I am running into the following problem.
    After completing Step 2: Create the New Portal, when I try to Hot Deploy the
    application, I get the following error.
    Hot deploy failed with the following message:
    Unable to add module: NewPortalWebApp to application descriptor for:
    portalApp.
    The log has the following information..
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    portlets\Portlet1.portlet to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\tools.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\webflow-extensions.wfx to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\user_account.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\portal.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\security.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\NewPortal.portal to sync list.
    Attempting sync...
    Sync complete.
    Searching for portalApp application descriptor...
    Found it.
    Error - please check log for details.

    That's great, Mike, you're welcome. I'm glad it's working for you. Thanks for letting me know.
    -Scott
    Mike Friesen wrote:
    I'm sorry you were right.. I tried it and everything works... thanks..
    Mike
    "Scott Ellis" <[email protected]> wrote in message
    news:[email protected]...
    Hi Mike,
    I hear what you are saying and I believe you. But the error you describedis the known issue related to Internet access
    (down to the exact line numbers in the stack trace). Is it possible yourconnection was down last time you attempted
    hot-deploy?
    If you are sure your Internet connection is up, I would recommend tryinghot-deploy again. If it still does not work,
    something very strange is going on. At that point I would recommendtrying the workaround anyway or escalating the issue
    to BEA Support.
    Now my curiosity is piqued so I hope you'll let me know either way.
    Best Regards,
    Scott Ellis
    BEA Systems
    Mike Friesen wrote:
    yes..
    "Scott Ellis" <[email protected]> wrote in message
    news:[email protected]...
    Can you please try something for me? Paste the following URL into abrowser:
    http://java.sun.com/dtd/application_1_3.dtd
    Does it come up?
    Thanks,
    Scott
    Mike Friesen wrote:
    Actually, my computer does have internet access, so I don't think that
    is
    the problem.
    Mike
    "Scott Ellis" <[email protected]> wrote in message
    news:[email protected]...
    Hi Mike,
    I would bet that you are working on a machine that doesn't have
    Internet
    access, correct?
    The problem is that the EBCC is trying and failing to access the J2EEapplication descriptor
    dtd from Sun's website.
    If you can't get Internet access, here is the workaround:
    - save the attached file to your harddrive (just save it to c:\)
    - edit the application.xml file for your project as follows:
    - first copy the entire DOCTYPE declaration and save it somewhere
    in
    a
    separate text file (in case want to revert back to it later)
    - edit the DOCTYPE declaration so that it looks like this:
    <!DOCTYPE application PUBLIC '-//Sun Microsystems, Inc.//DTD J2EEApplication 1.3//EN' 'file:///application_1_3.dtd'>
    ( notice that the java.sun.com web address is replaced with the URI
    to
    the file on your harddrive)
    - save your changes and hotdeploy will work with or without Internetaccess
    Thanks,
    Scott Ellis
    BEA Systems
    Mike Friesen wrote:
    I am going through creating a New Portal from WebLogic Portal 7
    Development
    Guide and I am running into the following problem.
    After completing Step 2: Create the New Portal, when I try to Hot
    Deploy
    the
    application, I get the following error.
    Hot deploy failed with the following message:
    Unable to add module: NewPortalWebApp to application descriptor for:
    portalApp.
    The log has the following information..
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    portlets\Portlet1.portlet to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\tools.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\webflow-extensions.wfx to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\user_account.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\portal.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\security.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\NewPortal.portal to sync list.
    Attempting sync...
    Sync complete.
    Searching for portalApp application descriptor...
    Found it.
    Error - please check log for details.
    <!--
    Copyright (c) 2000 Sun Microsystems, Inc.,
    901 San Antonio Road,
    Palo Alto, California 94303, U.S.A.
    All rights reserved.
    Sun Microsystems, Inc. has intellectual property rights relating to
    technology embodied in the product that is described in this document.
    In particular, and without limitation, these intellectual property
    rights may include one or more of the U.S. patents listed at
    http://www.sun.com/patents and one or more additional patents or
    pending patent applications in the U.S. and in other countries.
    This document and the product to which it pertains are distributed
    under licenses restricting their use, copying, distribution, and
    decompilation. This document may be reproduced and distributed but
    may
    not be changed without prior written authorization of Sun and its
    licensors, if any.
    Third-party software, including font technology, is copyrighted and
    licensed from Sun suppliers.
    Sun, Sun Microsystems, the Sun logo, Java, JavaServer Pages, Java
    Naming and Directory Interface, JDBC, JDK, JavaMail and and
    Enterprise JavaBeans are trademarks or registered trademarks of Sun
    Microsystems, Inc. in the U.S. and other countries.
    Federal Acquisitions: Commercial Software - Government Users Subjectto
    Standard License Terms and Conditions.
    DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED
    CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED
    WARRANTY OF MERCHANTABILITY, FITNESS FOR FOR A PARTICULAR PURPOSE OR
    NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH
    DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
    Copyright (c) 2000 Sun Microsystems, Inc.,
    901 San Antonio Road,
    Palo Alto, California 94303, E'tats-Unis.
    Tous droits re'serve's.
    Sun Microsystems, Inc. a les droits de proprie'te' intellectuels
    relatants a` la technologie incorpore'e dans le produit qui est
    de'crit
    dans ce document. En particulier, et sans la limitation, ces droits de
    proprie'te' intellectuels peuvent inclure un ou plus des brevets
    ame'ricains e'nume're's a` http://www.sun.com/patents et un ou les
    brevets plus supple'mentaires ou les applications de brevet en attente
    dans les E'tats-Unis et dans les autres pays.
    Ce produit ou document est prote'ge' par un copyright et distribue'
    avec des licences qui en restreignent l'utilisation, la copie, la
    distribution, et la de'compilation. Ce documention associe n peut
    e^tre reproduite et distribuer, par quelque moyen que ce soit, sans
    l'autorisation pre'alable et e'crite de Sun et de ses bailleurs de
    licence, le cas e'che'ant.
    Le logiciel de'tenu par des tiers, et qui comprend la technologie
    relative aux polices de caracte`res, est prote'ge' par un copyright et
    licencie' par des fournisseurs de Sun.
    Sun, Sun Microsystems, le logo Sun, Java, JavaServer Pages, Java
    Naming and Directory Interface, JDBC, JDK, JavaMail et and
    Enterprise JavaBeans sont des marques de fabrique ou des marques
    de'pose'es de Sun Microsystems, Inc. aux E'tats-Unis et dans d'autres
    pays.
    LA DOCUMENTATION EST FOURNIE "EN L'E'TAT" ET TOUTES AUTRES CONDITIONS,
    DECLARATIONS ET GARANTIES EXPRESSES OU TACITES SONT FORMELLEMENT
    EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS
    NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A
    L'APTITUDE A UNE UTILISATION PARTICULIERE OU A L'ABSENCE DE
    CONTREFAC,ON.
    -->
    <!--
    This is the XML DTD for the J2EE 1.3 application deployment
    descriptor. All J2EE 1.3 application deployment descriptors
    must include a DOCTYPE of the following form:
    <!DOCTYPE application PUBLIC
    "-//Sun Microsystems, Inc.//DTD J2EE Application 1.3//EN"
    "http://java.sun.com/dtd/application_1_3.dtd">
    -->
    <!--
    The following conventions apply to all J2EE deployment descriptor
    elements unless indicated otherwise.
    - In elements that contain PCDATA, leading and trailing whitespace
    in the data may be ignored.
    - In elements whose value is an "enumerated type", the value is
    case sensitive.
    - In elements that specify a pathname to a file within the same
    JAR file, relative filenames (i.e., those not starting with "/")
    are considered relative to the root of the JAR file's namespace.
    Absolute filenames (i.e., those starting with "/") also specify
    names in the root of the JAR file's namespace. In general, relative
    names are preferred. The exception is .war files where absolute
    names are preferred for consistency with the servlet API.
    -->
    <!--
    The application element is the root element of a J2EE application
    deployment descriptor.
    -->
    <!ELEMENT application (icon?, display-name, description?, module+,
    security-role*)>
    <!--
    The alt-dd element specifies an optional URI to the post-assembly
    version of the deployment descriptor file for a particular J2EEmodule.
    The URI must specify the full pathname of the deployment descriptor
    file relative to the application's root directory. If alt-dd is not
    specified, the deployer must read the deployment descriptor from the
    default location and file name required by the respective component
    specification.
    Used in: module
    -->
    <!ELEMENT alt-dd (#PCDATA)>
    <!--
    The connector element specifies the URI of a resource adapter archive
    file, relative to the top level of the application package.
    Used in: module
    -->
    <!ELEMENT connector (#PCDATA)>
    <!--
    The context-root element specifies the context root of a web
    application.
    Used in: web
    -->
    <!ELEMENT context-root (#PCDATA)>
    <!--
    The description element is used to provide text describing the parent
    element. The description element should include any information that
    the application ear file producer wants to provide to the consumer of
    the application ear file (i.e., to the Deployer). Typically, the tools
    used by the application ear file consumer will display the description
    when processing the parent element that contains the description.
    Used in: application, security-role
    -->
    <!ELEMENT description (#PCDATA)>
    <!--
    The display-name element contains a short name that is intended to be
    displayed by tools. The display name need not be unique.
    Used in: application
    Example:
    <display-name>Employee Self Service</display-name>
    -->
    <!ELEMENT display-name (#PCDATA)>
    <!--
    The ejb element specifies the URI of an ejb-jar, relative to the top
    level of the application package.
    Used in: module
    -->
    <!ELEMENT ejb (#PCDATA)>
    <!--
    The icon element contains small-icon and large-icon elements that
    specify the file names for small and a large GIF or JPEG icon images
    used to represent the parent element in a GUI tool.
    Used in: application
    -->
    <!ELEMENT icon (small-icon?, large-icon?)>
    <!--
    The java element specifies the URI of a java application clientmodule,
    relative to the top level of the application package.
    Used in: module
    -->
    <!ELEMENT java (#PCDATA)>
    <!--
    The large-icon element contains the name of a file
    containing a large (32 x 32) icon image. The file
    name is a relative path within the application's
    ear file.
    The image may be either in the JPEG or GIF format.
    The icon can be used by tools.
    Used in: icon
    Example:
    <large-icon>employee-service-icon32x32.jpg</large-icon>
    -->
    <!ELEMENT large-icon (#PCDATA)>
    <!--
    The module element represents a single J2EE module and contains a
    connector, ejb, java, or web element, which indicates the module type
    and contains a path to the module file, and an optional alt-ddelement,
    which specifies an optional URI to the post-assembly version of the
    deployment descriptor.
    The application deployment descriptor must have one module element for
    each J2EE module in the application package.
    Used in: application
    -->
    <!ELEMENT module ((connector | ejb | java | web), alt-dd?)>
    <!--
    The role-name element contains the name of a security role.
    The name must conform to the lexical rules for an NMTOKEN.
    Used in: security-role
    -->
    <!ELEMENT role-name (#PCDATA)>
    <!--
    The security-role element contains the definition of a security
    role. The definition consists of an optional description of the
    security role, and the security role name.
    Used in: application
    Example:
    <security-role>
    <description>
    This role includes all employees who are authorized
    to access the employee service application.
    </description>
    <role-name>employee</role-name>
    </security-role>
    -->
    <!ELEMENT security-role (description?, role-name)>
    <!--
    The small-icon element contains the name of a file
    containing a small (16 x 16) icon image. The file
    name is a relative path within the application's
    ear file.
    The image may be either in the JPEG or GIF format.
    The icon can be used by tools.
    Used in: icon
    Example:
    <small-icon>employee-service-icon16x16.jpg</small-icon>
    -->
    <!ELEMENT small-icon (#PCDATA)>
    <!--
    The web element contains the web-uri and context-root of a web
    application module.
    Used in: module
    -->
    <!ELEMENT web (web-uri, context-root)>
    <!--
    The web-uri element specifies the URI of a web application file,
    relative to the top level of the application package.
    Used in: web
    -->
    <!ELEMENT web-uri (#PCDATA)>
    <!--
    The ID mechanism is to allow tools that produce additional deployment
    information (i.e., information beyond the standard deployment
    descriptor information) to store the non-standard information in a
    separate file, and easily refer from these tool-specific files to the
    information in the standard deployment descriptor.
    Tools are not allowed to add the non-standard information into the
    standard deployment descriptor.
    -->
    <!ATTLIST alt-dd id ID #IMPLIED>
    <!ATTLIST application id ID #IMPLIED>
    <!ATTLIST connector id ID #IMPLIED>
    <!ATTLIST context-root id ID #IMPLIED>
    <!ATTLIST description id ID #IMPLIED>
    <!ATTLIST display-name id ID #IMPLIED>
    <!ATTLIST ejb id ID #IMPLIED>
    <!ATTLIST icon id ID #IMPLIED>
    <!ATTLIST java id ID #IMPLIED>
    <!ATTLIST large-icon id ID #IMPLIED>
    <!ATTLIST module id ID #IMPLIED>
    <!ATTLIST role-name id ID #IMPLIED>
    <!ATTLIST security-role id ID #IMPLIED>
    <!ATTLIST small-icon id ID #IMPLIED>
    <!ATTLIST web id ID #IMPLIED>
    <!ATTLIST web-uri id ID #IMPLIED>

Maybe you are looking for