CS5 Photomerge - how to avoid those strange jig-saw lines in the sky

Here is one image out of 4
that I am merging [just an example of one of many I do]
you will note that the sky area to the left of the rainbow is clear and normal.
When using Photomerge direct from bridge and on RAW files regardless of resolution I am getting nasty and annoying lines and areas of uneven-ness that are too hard to fix by retouching as they are widespread and large. They usually appear in smooth detail-less areas like skies and really stand out if you want to darken them. They are NOT anything to do with the joins of the images and they appear regardless of how many images you are merging. They appear regardles of which style - ie 'auto', 'reposition', 'cylinder' etc one chooses in the merge panel. As I am trying to sell large-scale and perfect panoramic prints for the wall, the only way I can avoid them is to keep these areas light so they don't show up - that's not what I want! The next pic shows an example - I have saturated to make it clear to see.
Regards Mal

Are you stitching 16 bits/channel files?  I would guess you're using 8 bit.  Posterization can be a problem with 8 bit.
Try 16 bit.  I've done a lot of Photomerges of 16 bit files and I don't see what you're showing.
-Noel

Similar Messages

  • My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?

    My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?

    Lynne130,
    to figure out which users have administrative privileges, open the Users & Groups pane of System Preferences; each user other than the Guest User will be shown with a description of either “Admin” or “Standard”. It’s typical for the first user created on a Mac to be an administrative user.

  • How to avoid output file and error lines when condition does not match

    Hi Experts
    A customer want to send purchase order files to several vendors and each vendor has their own requirement to content and file format. I have prepared scenarios for each vendor and a template is (conditionally) called when CardCode matches. It works fine, - PO file is generated when CardCode matches, but error lines are written to SAP B1 Control Center each time CardCode does not match the one defined in a scenario (100 or more times per day). Problem is that these error lines does not get automatic deleted. Conditional processing are made in this way:
    Result Message in SAP B1 Control Center when CardCode does not match:
    I tried to avoid an error line in SAP B1 Control Center when CardCode does not match in this way:
    Then no error lines are written to SAP B1 Control Center, but an output file is generated each time (order file when CardCode matches and an empty file when CardCode does not match).
    Any suggestions on how to avoid both errors types (error lines in SAP B1 Control Center and empty output files)?
    Or - can lines in SAP B1 Control Center be automatic deleted?
    Regards
    Steen

    Hi Steen,
    using <b1im_skip> should be the right approach, if you're working with B1 OUTBOUND.
    Following extract form the B1i help describes the usage to skip the outbound processing:
    1.1 Skipping Outbound Processing
    If you do not want to hand over the message to the receiver system, the scenario step can create a special tag that indicates to generic processing in the integration framework to skip the message processing.
    Add the following to the final transformation atom (atom0):
    <b1im_skip xmlns= ”” info=”my info” msglog=”true” msgout="yes">
    If the integration framework skips the message, it puts the message log information to the Filtered section, if the message log is switched on. The result message contains the Message skipped by vBIU logic information.
    info
    To display an individual message, define it using the info attribute.
    msglog
    If you want to avoid an entry in the message log, introduce the msglog attribute and set it to false.
    msgout
    To display the skip information in the Success section of the message log, use the msgout attribute and set it to yes.
    In case you don't want any MsgLogEntry in case of a skipped message, please enter the following in final atom0:
    <xsl:template name="transform">
    <xsl:attribute name="pltype">xml</xsl:attribute>
    <xsl:choose>
    <xsl:when test="$msg/BOM/BO/Documents/row/CardCode=&apos;C20000&apos;">
    <xsl:call-template name="transform2"/>
    </xsl:when>
    <xsl:otherwise>
    <b1im_skip info="skipped" msglog="false"/>
    </xsl:otherwise>
    </xsl:choose>
    </xsl:template>
    Best regards
    Bastian

  • How to avoid Java Studio Creator 2 to use the regional settings?

    How to avoid Java Studio Creator 2 to use the regional settings to select the language that will be used to display the IDE in a certain language?
    My country settings are set to Belgium (French) but I want to have my IDE running in English.
    What should I change in the defautl properties of JSC2 to avoid this behaviour?
    Please, don't tell me to change my regional settings, it is not a valid answer :-)
    Best regards,
    Abdelkrim BOUJRAF

    just modify creator.conf in directory etc/
    add: -J-Duser.language=en
    in the netbeans_default_options line:
    like this:
    netbeans_default_options="-J-Duser.language=en -J-Xms96m -J-Xmx384m -J-XX:PermSize=32m -J-XX:MaxPermSize=128m -J-XX:+CMSClassUnloadingEnabled -J-XX:+CMSPermGenSweepingEnabled -J-Xverify:none -J-Dnetbeans.javacore.background_scanning=true -J-Dsunappsrvint.home=\"C:\Program Files\Sun\Creator2\SunAppServer8\""

  • How to avoid that two or more people alter the same Sales Order same time

    I'm looking for a way to avoid that two or more people altering the same Sales Order at the same time.
    If someone has entered a Sales Order in the system and something needs to be adjust it can be done by two or more people at the same time. The problem is that when someone is saving these changes, the changes of another person, who is still working on the same order, get lost.
    So what we need is an alert that someone is already using this order and that no other person can make any changes at that time. So the order needs to be blocked for altering for any other person at that time.
    To avoid this I think you have to do something with the Stored Procedure. Or has someone a more simple and better solution.
    I've already put this thread in the Business One forum and someone suggested to put it in the Business One SDK forum, as there isn't a solution in Business One itself.
    So if someone can give me a direction for a solution I would be very pleased.
    Best regards,
    Tim

    Hi Tim,
    The only thing that comes close to what you want in standard SBO is Data Ownership. However, this can't stop someone editing a document that is already being edited.
    You can't use stored procedures to track which document is open because the SBO_SP_TransactionNotification proc (which is the only one that you are able to customise) is triggered when a document is updated or added (or cancelled or closed) and not when the document is actually being edited in the user-interface.
    You could do this by writing an addon that uses the UI API to trap events in the sales order form. In theory, a sales order is being edited if the sales order form is in Update mode (ie in order for the form to be in Update mode, the user must have selected an existing document and changed the value of at least one field). You can trap the event of the user changing a value and then log the user and document in a table. When other users try to edit the same document, you could check the table and then prevent them changing values. When the first user clicks on the update button (or cancels the update or closes the form etc etc) you can remove the lock on the document. However, I have doubts as to how robust it would be. The problem with this kind of locking solution is that you sometimes get 'stranded' locks (eg user was editing a document when their workstation crashed) and the solution can end up being more troublesome than it is worth.
    Kind Regards,
    Owen

  • How to avoid lo-gin prompt while check in the document and saving doc while opening the document?

    Hello
    I might be missing something to configure or verify but many times I have faced below situation :
    When I click on document in document library either its just opens or first save to disc and open.
    When I check in a document , its asking for credentials but sometimes doesn't
    Can anyone please describe the reason behind above behaviors ? how to avoid saving doc while opening and lo-gin prompt while check in the document?
    Thanks and Regards,
    Dipti Chhatrapati

    It the sharepoint site accessed through firewall
    http://support.microsoft.com/kb/2756625
    You can try adding below registry
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters\AuthForwardServerListAdd the site to Trusted Sites Zone instead of Intranet Go to Control Panel >> User Accounts >> Manage Your Credentials and remove any credentials storedMake sure your office and IE Is same build (64 or 32)http://www.techrepublic.com/blog/smb-technologist/prevent-unwanted-credentials-prompts-with-sharepoint-document-libraries/ checked that 'basic authentication' is unchecked under Central Administration -> Application Management -> Authentication
    ProviderOr tryhttp://social.technet.microsoft.com/Forums/office/en-US/45feb132-c304-4521-8b79-42236a829aab/login-prompt-appearing-when-opening-office-documents?forum=sharepointadminlegacy
    If this helped you resolve your issue, please mark it Answered

  • How to avoid that two or more people altering the same Sales Order

    I'm looking for a way to avoid that two or more people altering the same Sales Order at the same time.
    If someone has entered a Sales Order in the system and something needs to be adjust it can be done by two or more people at the same time. The problem is that when someone is saving these changes, the changes of another person, who is still working on the same order, get lost.
    So what we need is an alert that someone is already using this order and that no other person can make any changes at that time. So the order needs to be blocked for altering for any other person at that time.
    To avoid this I think you have to do something with the Stored Procedure. Or has someone a more simple and better solution. So far I didn't find a standard option in Business One neither a solution in this forum.
    Best regards,
    Tim

    Tim,
    There is nothing in the application settings in Business One that could be used to prevent this.  You may post this to the SDK forum as well and perhaps there is a way to achieve this through SDK.

  • How to avoid starting a page with line breaks?

    Hello. I've just started to refine my Master's thesis and some of the topics moved up and down as I edited their contents. The problem is that in some cases the topic breaks right after the title, and the rest of the contents just move away to another page. Is there any way to avoid starting a page with line breaks or broken topics?

    At the end of your title, you didn't inserted a line break but a paragraph break (carriage return).
    Acivate the mode "Show hidden characters"
    Select the carriage return (paragraph break)
    Delete it
    Press Shift + return to insert a true line break.
    It may be useful to apply that several times if you inserted several carriage returns between the title and the first filled line.
    Yvan KOENIG (VALLAURIS, France) 15 mai 2011 19:40:14

  • How to avoid a blank page at end of the page?

    Hi Experts,
    I have created a smartform where i need to display the line items based on the customer data.
    I have created a command at the end of the loop. For every new customer it has to go to new page. After the completion of the report i'm getting a blank page at the end.
    If i take a single customer or multiple customer, I'm getting a blank page at the end. I need to avoid this.
    Please let me know the procedure to avoid it.
    Thanks and Regards,
    Abdur Rafique

    Hi,
    Try this logic
    In the "Initialization" tab of global definitions
    DESCRIBE TABLE IT_TAB LINES W_COUNT.
    Here IT_TAB contains all the customers
    While looping IT_TAB count the records into W_COUNT_CURRENT " Current record count
    In the COMMAND give the condition
    W_COUNT_CURRENT  <> W_COUNT (Go to new page as long as current customer is not the last customer)
    For the last customer both variable will be equal and there will not be a new page.
    Note that the COMMAND must be at the end of the LOOP for this logic to work
    Regards

  • How do I eliminate text with black lines through the words

    I am using Firefox 14.0.1 on Linux Ubuntu 11.04.
    I am getting black lines through the text on some web sites. Mostly Google. How do I eliminate the lines.

    A few other basic trouble shooting things you can try is this:
    Run all Windows Updates, install all needed service packs, etc.
    Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
    Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections.

  • How do I run a new phone line from the ONT?

    I want to move my phone plug to a different room. So I will have to run a new line from the ONT? I have a traditional 4 wire telephone cord, but the wires don't match up. Can use the test port? Or how else would I do this?

    sean43245667 wrote:
    I want to move my phone plug to a different room. So I will have to run a new line from the ONT? I have a traditional 4 wire telephone cord, but the wires don't match up. Can use the test port? Or how else would I do this?
    It will cost you to add a line.  The test jack might work.  I was actually unhappy to see that when they replaced my BPON ONT with a GPON ONT that it went from have conventially modular jacks to having wire posts for the phone line.
    Choices inlude. 
    paying verizon to run wire
    trying to wire to the ont yourself
    putting a spliter/adapter somewhere on the existing wire to your new location
    trying the test jack.

  • How to avoid links upp/down being propagated to the syslog server?

    How do you avoid approx 5 billion links up/down filling up the Syslog server when you connect a couple of hundred Cisco Switches? Apart from setting the Level to Critical.
    If possible we would like to gett messages from Warning and upwards in order to be able to pinpoint problems before they happen (or atleast find out what caused them) but not at the cost of having the whole logg drenched in links upp/down! We would also like the link-messages to remain in the switch log.

    You can create a logging discriminator to filter out those messages and then specify the discriminator in the logging host definition.
    For instance:
    logging discriminator FILTER mnemonics drops UPDOWN
    logging trap notifications
    logging host <syslog_server_address> discriminator FILTER
    (Note the discriminator name is limited to 8 characters.)

  • How to avoid printing an additional blank page at the end of the report

    I have a report which has 3 panels in the main section of the report, about 3 pages in size. 1st & 2nd panels are enclosed in a repeating frame, and 3rd panel in a different repeating frame.
    The vertical panels per page in the property inspector of the main section of the report is kept as 2. And thus, when I am printing the report I am getting an additional blank page at the end. Also I tried to make the vertical panels per page to 1 in the property inspector for main section but the following error is being returned:
    REP-0801: Layout canvas must remain large enough to fit all layout objects
    Can anyone tell me how to handle this?

    Hi,
    I too faced similar prob.
    But when i made the After Page Value property of the report as blank it removed the blank page for me .
    Try this and let me know whether it has helped you.
    Regards
    Srinivas Pusa

  • How to avoid Huge scan with case condition in the select statement.

    Hi ,
    I have the below sql and add condition such that c.ROLE = 18 then tibex_fixrestorestateview needs to be queried else it should not query the tibex_fixrestorestateview.
    tibex_fixrestorestateview contains 10 to 20 millions records so to avoid scanning when c.ROLE <> 18
        SELECT c.connectionid, u.participantid, c.port, u.PASSWORD, cg.gatewayid,
               c.ROLE, u.cancelonlogout, NVL (f.tofixsequence, 1) AS tofix,
               NVL (f.fromfixsequence, 1) AS fromfix
          FROM tibex_connectiongroup cg INNER JOIN tibex_connection c
               ON cg.connectiongroupid = c.connectiongroupid
               LEFT JOIN tibex_user u ON c.connectionid = u.userid
               *LEFT JOIN tibex_fixrestorestateview f*
              ON u.useralias = f.useralias AND c.ROLE = 18;Regards
    NM

    Hi;
    I suggest close your issue here as answered than move your issue Forum Home » Database » SQL and PL/SQL which you can get more quick response
    Regard
    Helios

  • How to avoid page break in row other that the option "Avoid page break"

    Hi Experts
    Is there any way to avoid a row to be broken or extended to other page. "Avoid page break" option can not be used as it creates a lots of white spaces.
    Regards
    Sourashree

    If it is related to visibility you can choose Draft Mode or change the Page size.

Maybe you are looking for