CS5 PP with Zoom R16 mixer

Does anyone out here know if Premiere 5.5 can be used with the Zoom R16 mixer via USB.  I'm tired of using a mouse to manipulate the audio sliders and wondering if my mixer can do the job.  Or in fact...any mixer.  Thanks
Dan

I don't think there is any mixer that would supported by Premiere. However the sound card that does have some kind of mixer input will work with premiere
I have Asus Zonar sound card that has a mike input and line input and midi input as well. so any of those inputs work with premiere and midi input works as well, if it enabled. Currently it is disabled in sound card and not shown on screen shot. Perhaps that would give you some Ideas where to look for.

Similar Messages

  • How can get my Zoom R16 to work with garage band

    I just up graded garage band but i can't get it to work with my Zoom R16 .
    How do I solve this problem

    Have you contacted the zoom folks? Have you looked for updated drivers?

  • Has anyone successfully used the Zoom R16 with Audition?

    I’ve tried just about everything, but can’t seem to get Audition to run with the Zoom R16.  As noted in a recent post, I updated both the Zoom R16 firmware and widows driver, but that doesn’t seem to make the 2 work harmoniously. 
    Has anyone had success getting the 2 to work together?  If so, what’s the trick?!
    Thanks in advance
    C

    CharlestonPro wrote:
    As noted in a recent post, I updated both the Zoom R16 firmware and widows driver, but that doesn’t seem to make the 2 work harmoniously.
    I'm intrigued - what is actually disharmonious?

  • PS CS5 Ruler and zoom

    Hi,
    When using Ctrl+ or Ctrl - to zoom the ruler is not always resizing. This does not happen in CS4 (the rulers resize with the image). I have downloaded the latest drivers (NVidia) for my graphics card but the problem still remains. I am using windows Vista.
    I can get round the problem by pressing Ctrl R twice (to remove then re-display the ruler) at which point it sizes correctly, but this is a bit of a nuisance. Any ideas?
    Dave

    So far no-one able to help, so a little more information from experimenting may identify the issue (or if anyone else has the problem).
    The problem i.e. the ruler not resizing with zoom (Ctrl +  and Ctrl -), occurs when "Resize windows to fit" is not checked in the zoom tool.
    Changing from 16.7% zoom to 25% zoom, and vice versa, the ruler does resize with the image but beyond those sizes the ruler does not change until I press Ctrl R twice to undisplay and re-display the ruler.
    Using the buttons to zoom, going from "Fit Screen" to "Actual Pixels" changes the ruler. But going from "Fill Screen to Actual Pixels" the ruler shows the same scale as it did in "Fill Screen" even though the image has changed.
    Checking the "Resize Windows to fit" box in the zoom tool results in the ruler changing correctly with the image as it is zoomed. However I lose the smooth zoom transition. No big loss and my current workaround for the problem.
    This is only happening in CS5 - in CS4 the ruler works correcly.
    Any ideas pointing toward correcting the issue would be appreciated.
    Thanks
    Dave

  • Will the Zoom R16 work as an interface in Logic Pro X under Mountain Lion?

    I've searched and found some indications that the Zoom R16 will work and has problems with earlier versions of Mac OS; so my question is actually will the R16 work under Mountain Lion (GB, Logic Pro, etc) as a control AND a recording interface?
    I'll be using it on either a late 2011 MBP core i7 16GB Ram solid state HD (live playing, live recording) or on a late 2012 iMac core i7 32GB Ram solid state HD with Thunderbolt and USB3.0 outboard drives (recording).
    Any input would be appreciated... I've been unable to definitely tell if it's an "install the driver, install Logic Pro, and then rock n roll" or it's a "doesn't work correctly, makes noise, crashed my system AND killed my pet rabbit" kind of thing.
    Thanks,
    Les

    Thanks Art of Sound. I did see that post but it didn't give me a warm feeling about the Zoom.
    My bad, I should have posted back after I messed around with this. It turned out that my problem was due to some kind of intermittent connection within the Zoom itself.
    I got another one, and it's working fine now as a Mackie Control. It's a little arcane getting it hooked up in Logic (mostly due to inexperience on my part), but so far it seems to be working fine...
    If I can spare anyone the frustration/confusion:
    Basically:
    Download the latest and greatest Zoom R16 driver from their web site and install (I'm using OSX ML and it works fine with Logic Pro X).
    Plug in Zoom R16 via USB 2.0 cable, (then on the Zoom itself, select USB, then AUDIO INTERFACE? (Enter), then SETTING? (Enter).
    You may need to open Audio/Midi Preferences and set that to the ZOOM R16.
    Open Logic and hopefully it sees the Zoom.
    Under main Logic Pro X header, select Control Surfaces>Setup
    Find and add "Mackie Control" (there are other ones, this one works, can't speak to the rest).
    Then (and this is the part that I kept missing) make sure to select the Mackie Control (so it gets a blue box around it) and then make sure the Output Port and Input Port are set to Zoom R16_R24 using the little up/down arrow thingies at the right of each box. I didn't see these/figure out how to select at first... I'm a DA NOOB.
    That's it. Open a new multitrack project, assign your inputs to channels, and off you go!
    Recording:
    All inputs work, level control and faders (which aren't motorized, so it can be a little confusing at first)
    Transport and control buttons work, the jog/shuttle is useful.
    There are 5 function buttons that by default change the Logic screen setups (can be programmed differently)
    Track button seems to mute/unmute only.
    The on-board condenser mikes work, if you want them (channels 7 & 8 on the Zoom). Ugh.
    Electric guitar direct in seems ok, and a Shure SM57 worked fine. I'll be working with some better mikes hopefully this weekend.
    I have it working happily with a late 2011 MBPro, and a late 2012 iMac.
    For the money, considering it's a stand-alone 8 track digital recorder (seems to work ok for that purpose so far) as well, it's actually sort of cool. Setup your mixdown in Logic as a wave project, and pull the files off the SD card (Zoom can be configured as a USB card reader easily). Will record at high sample rates allegedly.
    I won't be so lazy in future, and I'll report my on-going experience with it.

  • Is cs5 compatible with windows 8?

    is cs5 compatible with windows 8?

    Are you asking about the entire Creative Suite or just Photoshop?
    I have Photoshop CS5 installed and running on Windows 8.1.
    -Noel

  • Is Photoshop CS5 compatible with the new Adobe Camera RAW 8.6?

    Is Photoshop CS5 compatible with the new Adobe Camera RAW 8.6?
    I am using the new Nikon D810. Adobe Camera RAW has this new camera included. But I cannot open the NEF files in Photoshop CS5

    NO

  • Using Adobe Photoshop CS5 Extended with MacBook Pro Retina

    I intend to buy the new MacBook Pro with retina display. Does anyone know if I will be able to use Photoshop CS5 Extended with it? I could upgrade to CS6 but it seems an unnecessary cost given that I am still quite happy with CS5.

    CS5 does not offer Retina quality display - in fact, it looks awful. The current version of CS6 was updated to work with Retina display models (you'll need to check with Adobe to see what the current version of CS6 is... I know they haven't 'abandoned' it, but I subscribe to CC so I'm on CC 2014).
    Good luck,
    Clinton

  • Is adobe photoshop CS5 compatible with Mountian Lion on the 2013 iMac?

    Is adobe photoshop CS5 compatible with Mountian Lion and Maverick on the 2013 iMac?

    Hello, I run it at home without problem. In fact, even the next version of OS X works ok: http://helpx.adobe.com/x-productkb/global/mac-os-mavericks-compatability.html

  • Is CS5 compatible with Windows 8.1

    Is CS5 compatibl with Windows 8.1?

    Yes/ no/ perhaps. There are compatibility issues, but none of them are unsurmountable. They may just require some computer nerdery.
    Mylenium

  • Is Photoshop CS5 compatible with Windows 8?

    My computer died and I have to buy a new one which will probably come with Windows 8. Is Photoshop CS5 compatible with Windows 8? I can't seem to find a straight answer.

    It is not officially supported as the OS was not available with CS5 was written.  It will work on it however.
    From what I have read Win 8 is a step down from Win 7 from a purely operational view.  It also has an annoying problem with the screen blinking with many of the video cards.  So see if you really like the features of Win8 before committing.  Win7 should still be available but you would have to make it a special request.

  • Adding a button with zoom function

    Hello,
    I am working on a product catalog and for this purpose we have used a professional photographer to shoot product photos. The photos are really nice and they can be zoomed in to see every detail clearly. The photos have been inserted into the pdf catalog but because of the limited space they are not very detailed.
    Is it possible to add a button or link with zoom function? For example, an icon such as a magnifier or just the word zoom so when a user clicks it, it will zoom in the pre set area to a pre set level and center it.
    Sounds quite fancy right? Maybe i'm thinking the impossible... but it's worth a try here :)
    Regards,
    Rudi

    ok. i got it! :))
    i have made some changes myself. When the mouse enters button1, button2 becomes visible and button1 becomes hidden (otherwise it is overlapping button2). I have set this in the actions of button1. I would also add the following function: when visible button2 is clicked it hides button2 (this you have already shown and works) and makes button1 visible again. I guess making button1 visible again has to be done with a Javascript in the actions of button2 under mouse up.
    I have no knowledge of programming. Can you tell me how to do this?
    After i openen the pdf file and used this function and close the pdf file it asks to save the pdf file. How can i prevent this to show up? I dont want this to happen to my customers.
    Is it possible to see the exact dimensions of the button? Then i could create both buttons so that they fit in my catalog exactly as i want them, and then check the dimensions and scale my photos to it. Although it seems that Acrobat does something with the photo size already as the photo in button2 is 34mb while the pdf file is only 200kb.
    thanks.
    rudi
    BTW this is really a well thought out solution and i think not many people are aware of this because i have never seen it before

  • Error code 16- I re-installed Design Premium CS5.5 with no luck

    Hello,
    I can no longer open any of my Adobe applications. I am getting an error 16 message that reads "configuration error." I have uninstalled and re-installed the full Adobe Design Premium CS5.5 with no luck. When I re-instlled it I also got an error 213:5 message about resetting the SLStore and the Adobe folder.
    Nothing works.

    Unfortunately that didn't work. After pasting the command in the window I
    got this:
    sudo: /private/etc/sudoers is mode 0644, should be 0440
    sudo: no valid sudoers sources found, quitting
    MAC17-2:~ MAC1$
    Any suggestions??

  • Will photoshop CS5 work with Lion

    I need to get a new photoshop, mine is out of date. Will Photoshop CS5 work with OS 10.7.2? Adobe doesn't include 10.7.2 in their tech specs.

    I have it and it runs fine on Lion.

  • DVD player with zoom?

    Hi there
    i have macbook about a week now.I am trying to watch my movies in full screen with NO black bars.In front row i have bars in dvd player as well.I think i gonna need some player with zoom.I have download nice player there is zoom but wasn't able to click on it don't know why.I have tried Front row player,VLC,Nice player nothing worked.I am starting to be worry that it is impossible to watch dvd in full screen with no bars.I just wanna watch full screen how simple is that ? I have 13'' screen it's not the biggest one and with them bars it's even smaller Any help ?
    Mackbook   Mac OS X (10.4.10)  

    I finally got it !
    http://niceplayer.sourceforge.net/resize.php

Maybe you are looking for