CS5 Premiere: Timecode Help Needed: Needing to transcribe using source timecode

Is there a way to change the timecode overall for all of the imported clips in Premiere to reveal the source timecode after importing footage from an external hard drive? Each of the imported clips continue to start at 0, even after selecting 'Use Media Source' from Preferences_Media. I am transcribing a few hours of footage and need to have it continually showing the timecode from the source instead of starting at 0 for each clip. Any help would be great. Thanks!

Each of the imported clips continue to start at 0, even after selecting 'Use Media Source' from Preferences_Media.
If you load a single clip into the Source Monitor, it should show you the media timecode.  That won't happen by default in a Sequence or in the Program Monitor.  To see source media timecode in the timeline, you'll need to add the Timecode effect to all of the clips in your sequence.  It defaults to the timecode from the source media, so the effect's timecode display should update as you go from clip to clip in the timeline.  The overall sequence timecode will still start at zero (or whatever starting timecode you designate).
Cheers,
Jeff

Similar Messages

  • Why does Premiere Pro stop, or drop frames when using the Timecode Effect.

    The Timecode Effect is gpu accelerated, the render bar is yellow and it still drops frames.
    If it drops frames on a yellow bar, how can I ever trust it to print to tape? It wouldn't be a problem if I could say render the yellow sections of my edit, but it won't because the bar is not red. Very frustrating!
    Running 64bit windows 7;
    gtx470 graphics card;
    12GB of memory (9 reserved for Premiere)
    Raid 0 _ Speed Tested Excellent
    working with uncompressed black magic 1080i AVI's
    It seems to happen when I have overlapping clips with the Timecode Effect on one or both. Plays fine if just a single clip with the effect.
    Any help would be great, hopefully I'm just missing something simple..

    Harm,
    Here is a capture of my speed test. I do have 4 disks on a raid 0, very little data on the drives. I have run 3 tracks of HD with different levels of opacity with no problem. I do crash the drives when I add the forth. So I would like to think that two tracks with accelerated effect should be fairly simple to playback. Am I wrong to be thinking that way? Also only working with 8 bit, This test is for 10 and up.
    The read comes in above 500 mb/s. It was on the way up when I captured it.

  • Random Premiere Pro CC crashes ***Need help***

    Hiya, this is my first time posting here so excuse my scruffy postings.
    I am having some serious problems with my PP:CC and I can not find anything anywhere or anyone who has been struggling with the same crashes as myself.
    What seems to happen to me is at random intervals my Premiere Pro says "Premire Pro Creative Cloud Has stopped working..." blah blah and then either closes off itself or I have to close it off, with no way for me to save my work. It gives me no crash report either and no trace to follow up as to why it crashes. These crashes can happen within 10 seconds of me opening the program and then I can edit for hours seeing nothing. It also happens when I do anything, there is not 1 specific task / operation I make for it to crash although commonly today it has crashed once I drag the timeline bar left a minute or two, or importing new video clips, adding transitions, basically anything and I don't know what's wrong!
    I first got these errors when I used Premiere Pro CS5.5 and they were beoming more and more common so I decided to upgrade to CC, that didn't help my case. A friend told me to re-install QuickTime which for about a week I didn't get any crashes and managed to get a lot of work done, but now the crashes are back!
    Thanks for reading and if you know anything, then please help!
    PS: I am using Windows 7 and here are my specs:
    Intel i7-4770K @3.50Ghz 64-bit
    32 DDR3 1600mhz memory
    EVGA GTX Titan

    >EVGA GTX Titan
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    How to determine your nVidia driver version
    Right click in any open area of the Windows desktop
    Select NVIDIA Control Panel from the popup window
    Select SYSTEM INFORMATION at the lower left corner
    Driver version should be the 1st line in Details
    I have a GTX285 using driver 296.10 and Win7

  • I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

    I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

    If you had given us sensible information, I could look it up for you if your efforts fail.
    Right now, I don't even know if you are on a Mac or on a Windows box.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • HELP! Need to add TIMECODE

    can someone please help
    I need to add a timecode to an FLV
    I added all the other controls and tied them to teh playback
    with AS but for teh life of me cannot figure this out
    Thank you all

    use:
    minus_btn.addEventListener(Event.MouseEvent,CLICK, clear)
    function clear(e:MouseEvent){
    var sql:SQLStatement = new SQLStatement();
    sql.sqlConnection = conn;
    var s:String = "DELETE from contacte WHERE nume= :numeparam AND telefon=:telefonparam";
    sql.text = s;
    sql.parameters[":numeparam"] = whatever;
    sql.parameters[":telefonparam"] = whatever else;
    //add listeners if you want
    sql.execute();

  • I have Photoshop CS5.5 Design Premium and need to open Nikon NEF files

    I have Photoshop CS5.5 Design Premium and need to open Nikon NEF files.
    I just downloaded the plug in for CS5.5 and it does not work. I put the Camera Raw.8bi file in the correct location as specifiec in the "read me" file.
    Can someone guide me on how to do this, adn make it work?
    Thank you.
    Jay

    so far no luck.
    I ran DNG program for Windows (I have Win 8) and ran the menu to convert
    the files on the same memory card from the camera.   Of 135 files, the
    status column for the first 68 files said "converted," but the for all the
    rest, it says "There was an error writing the file."
    Of the files that "converted," they do not open, and I get the same error
    message as before: "Could not complete your request because it is not the
    right kind of document."
    So, what a mess.
    I get conflicting indications of the version of Photoshop I have. When i
    click "About Photoshop in the Help menu, it says CS5 Extended.    The Error
    message for the dng files says CS5.1 Extended.  Does it make a difference?
    I've been at this three hours now.  It's a pain.   For many years I had no
    problem with NEF files, as I had installed the plug-in as required. This
    time it is not working. So I am not new to this.
    Jay

  • Need Help in Splitting a String Using SQL QUERY

    Hi,
    I need help in splitting a string using a SQL Query:
    String IS:
    AFTER PAINT.ACOUSTICAL.1..9'' MEMBRAIN'I would like to seperate this string into multiple lines using the delimeter .(dot)
    Sample Output should look like:
    SNO       STRING
    1            AFTER PAINT
    2            ACOUSTICAL
    3            1
    4            
    5            9" MEMBRAIN
    {code}
    FYI i am using Oracle 9.2                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    There's this as well:
    with x as ( --generating sample data:
               select 'AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN' str from dual union all
               select 'BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN' str from dual)
    select str,
           row_number() over (partition by str order by rownum) s_no,
           cast(dbms_xmlgen.convert(t.column_value.extract('//text()').getstringval(),1) as varchar2(100)) res
    from x,
         table(xmlsequence(xmltype('<x><x>' || replace(str,'.','</x><x>') || '</x></x>').extract('//x/*'))) t;
    STR                                                S_NO RES                                                                                                
    AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN                 1 AFTER PAINT                                                                                        
    AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN                 2 ACOUSTICAL                                                                                         
    AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN                 3 1                                                                                                  
    AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN                 4                                                                                                    
    AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN                 5 9" MEMBRAIN                                                                                        
    BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN          1 BEFORE PAINT                                                                                       
    BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN          2 ELECTRIC                                                                                           
    BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN          3 2                                                                                                  
    BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN          4                                                                                                    
    BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN          5 45 caliber MEMBRAIN      
    {code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my

    I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years.  Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge.  180GB plus.
    I now have a Macbook Pro and will add an iMac when the new models arrive.  For my photos, I want to stay with Photoshop which also gives me the Bridge.  The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows.  What am I missing and is using iPhoto worth the effort?
    If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient.  If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward.  However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto.  In the past, I have experienced syncing problems with, and database errors in, large databases.  If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
    Some guidance and insight would be appreciated.  I have a number of Faces questions which I will save for later. 

    Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
    Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
    Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
    For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
    Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
    The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
    Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
    The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
    Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
    When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
    These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
    So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
    So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

  • My phone 5s did the new update and will not come back on. I already tried hard reboot still won't work. Been over a hour now. Please someone help I need my phone.

    My phone 5s 16gb gold did the new update and will not come back on. I already tried hard reboot still won't work. Been over a hour now. Please someone help I need my phone.   This phone is not even 6 months old been in case no scratches. This is driving me crazy.

    Connect your phone to a computer and restore your software using iTunes.

  • In the new mail app for OSX v10.7 Lion it seems I can only setup my gmail account as an "imap", when I need to set it up as "pop"... PLZ HELP I NEED MY MAIL TO WORK!!!

    In the new mail app for OSX v10.7 Lion it seems I can only setup my gmail account as an "imap", when I need to set it up as "pop"... PLZ HELP I NEED MY MAIL TO WORK!!!

    Go to System prefs
    Select Mail Contacts and Calendars
    Then select Other
    Then select "Add a Mail Account and click create
    Then go to google for the settings you need:
    First here for the settings online at gmail http://tinyurl.com/du3fu
    Then here for the setting in mail http://tinyurl.com/38fevm8
    These are instructions for Mail 4.0 but all of the necessary settings should be listed.

  • Help, I need to run three displays on my Mac Pro 4,1.

    Help, I need to run three displays on my Mac Pro 4,1.
    I have a Radeon 5870 installed with OS X 10.8.3
    need to run a Dell 30 inch dislay, a 19 inch Eizo and a 12 inch Cintiqu Display Tablet please.
    Ant tipes or hints?  Failing that, I would like to know of a comptaible video/graphic card which will only take up an additional slot, as I have the others filled with eSata and USB 3 cards.
    Cheers
    David

    Your 5x70s support three monitors. Are you having trouble?
    Answered just last night in this thread also
    https://discussions.apple.com/thread/4933924?tstart=0

  • I have an I pad2, an iMac desktop and an I phone 5, how do I get them all to be bale to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Ay help gratefully received !!

    I have an I pad2, an iMac desktop(2012) and an I phone 5, how do I get them all to be able to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Any help gratefully received !!

    Graham,
    For the iPad, iMac you need to create verifyible e-mail addresses created with one of the providers such as Yahoo, Gmail,etc.  For the iphone you should use it's phone number, but an e-mail could be used for it too.  If you want to associate these e-mail addresses with a single ID, I'm including a link to give you info about how you can do that. Read it carefully, as it can be a bit confusing.
    http://support.apple.com/kb/HE68

  • Windows XP Clean Install – What I discovered and the help I need

    Windows XP Clean Install – What I discovered and the help I need
    I previously had a problem with my Laptop dying randomly you can read about it in the thread entitled Computer dies Randomly (Battery also dead) click to view
    Before I realised the solutions, I thought that maybe my Laptop had become infected with a Virus and decided it would be prudent to do a clean install of the Windows XP operating system.
    Everything went perfectly and thought a clean install was a good opportunity to download the “XP Service Pack 3” SP3 and did so, it seemed very quiet though and that’s when I realised I had no sound…
    I downloaded all of the sound drivers I could find on the Lenovo site for 3000 N100 (I knew from previous experience that the “SOUNDMAX” driver is the only one that actually works with this 3000 N100) in order to install this you have to install the Realtek HD audio driver, but in order to install that you have to install some other Driver/Soft that only works with SP1 or SP2 if you try to install it with SP3 it will say that you don’t need the file as your Service pack is newer than the file you want to install, this is understandable as SP3 is not final as of yet (but it’s good to know).
    My next problem was that my extra RAM was not detected, this was fixed by updating the BIOS, after installing all of the System updates, PC Doctor, everything I could find for 3000 N100 I decided to rest, I pushed the Lenovo care button and it did not work, I found a hot key driver and installed it but still the Lenovo care button does not work, previously when I pushed this button it would bring up the Lenovo menu but now it’s just a dead button, Does anyone know how to get this button working again?
    I am pretty sure that everything else is working fine now, just that button not working is very annoying, is there a set routing of installs you must do to get everything working, i.e. bios 1st audio 2nd system update 3rd etc...
    Please help, I hope I have helped you...
    Message Edited by DrunkenNinja on 05-07-2008 03:38 AM
    Message Edited by DrunkenNinja on 05-07-2008 03:38 AM
    Solved!
    Go to Solution.

    Ok first everything works now... except the Lenovo Care button, I just posted the other stuff cause it might help other members,  I have searched the forum for an anwser to this problem but there was only one anwser (suggesting to uninstall the driver restart and re-install it) and it did not result in a working Lenovo Care button...
    I don't beleive the Lenovo keyboad drivers are in any way related to the Service pack 3 as they do not use the Service pack files, to back this up I also had the same problem when Service Pack 2 was installed...
    The Lenovo Care button works fine on Boot up screen to access the rescue and recovery software (So the mechanics of the button are fine) but once Windows XP loads it is just a dead button, I remember it used to open up the Lenovo Care Start bar, I got it working once in the past but I can't remember what I did, I thought someone here might know the anwser...

  • I have a new Ipad and when I try to buy an app it asks for my  questions! I dont remember them so I press the button that send me an email to reset them. Ive sent it various times but it doesnt arrive. please help I need this app for school!!!

    I have a new Ipad and when I try to buy an app it asks for my  questions! I dont remember them so I press the button that send me an email to reset them. Ive sent it various times but it doesnt arrive. please help I need this app for school!!!

    See Kappy's great User Tips.
    See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
    Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
     Cheers, Tom

  • I have a brand new iMac, Yosemite 10.10.1, Java Version 8, Update 25, however, I still get a window when I open Adobe Photoshop CS5, that indicates that I need to install Java SE 6 Runtime. Any suggestions?

    I have a brand new iMac, Retina 5K, Yosemite 10.10.1, with Java Version 8, Update 25, however, I still get a window when I open Adobe Photoshop CS5, that indicates that I need to install Java SE 6 Runtime. Any suggestions?

    Java should be downloaded directly from Apple:
    Java for OS X 2014-001

Maybe you are looking for