CS5 - problem with motion tween..HELP!!

Experts out there, please help.
I have migrated from Flash CS3 to Flash CS5. Unlike in CS3, in CS5 when i use motion tween i am unable to use multiple 'ease in' and 'ease outs' in a single tween span. The tween span has to be divided by the 'split motion' command at 'properties keyframes' into smaller tween spans to further apply ease in/out to each one of them. This is not the case with CS3, you just select one keyframe after another and apply the ease in/out command, no divisions required.
Lets say i want control the accelaration and deccelaration of a bouncing ball without breaking the tween span. How do I do it in CS5 without wasting all the sweat?
Please guys i really need this
I'll be greatful
Thanks

The classic tween is the same as the old Motion tween was in CS3 and earlier. You can grab a keyframe and drag it along he timeline to extend or reduce the tween.
The "new" Motion tween was invented to allow for 3D tweening and to allow you to save the tween action exclusive of the elements that were being tweened, so that you can easily replicate a tween on the timeline.

Similar Messages

Problem with motion tweening in Flash CS4

Hi !
I tried to refresh my little flash knowledge -- but I stumbled upon a problem with the new Flash CS4!
When I try to make different blur or alpha effect on one keyframe I got after making the motion tween -- Flash adjust the other keyframe as well (got the same reaction on both keyframes as if it was the same instance of movie clip -- and not as in old flash; the keyframes created separated or independent instances)
The only thing working for me is when I move the movie clip out of the stage on the first keyframe -- and it correctly move its position.
What's wrong?
Kind Regards
Maria Olsen

Hello Maria,
You sort of answered your own question:)
"got the same reaction on both keyframes as if it was the same instance of movie clip"
That is exactly right and is the proper way of looking at new motion tweens. It is one instance of the movieclip for the duration of the tween. It takes awhile to get used to this.
New motion tweens allow you to set up a a very simple tween initially without keyframing ending values / position. Once you start making changes after the tween is set, you are going to have to get familiar with adding "property keyframes". Property keyframes are displayed with those little diamond icons in the timeline. Poperty keyframes allow you to "lock in" certain specific properties at key points in your animation without affecting other properties. With the old classic keyframes, a keyframe placed mid-tween would create a whole new instance of a symbol with all properties (rotation, scale, alpha etc) set in stone for that point in time. The benefit was that you could easily have all properties tween TO and FROM that keyframe if that's what you wanted. Now you can make adjustments to a symbol mid-tween and only specifically adjust a single property. So you can adjust the alpha of an object mid-tween without interrupting say a rotation that you wanted to happen all the way through.
If you simply want an object to move left to right and then you decide it should fade in
CLASSIC TWEEN
-place symbol on frame 1
-keyframe frame 10
-in frame 10 move the symbol to the right
-add classice tween
Ok, that works, now add alpha fade in
-go back to frame 1 and set alpha to 0
-classice tween automatically adjusts alpha from 0 in frame 1 to 100 in frame 10.
-done
MOTION TWEEN
-place symbol on stage
-create motion tween
-playhead jumps to last frame
-move symbol to the right (no need to f6 / keyframe)
Flash automatically adds something called a "position" keyframe (notice the little black diamond)
Ok, that works, now add alpha fade in
-go to frame 1 and set alpha to 0
-test movie
-oops - wrong. As you noted the alpha will stay at 0 throughout the whole tween.
-you need to additionally go to the last frame and set the alpha back to 100
-this will automtically create a "color" property keyframe on the last frame
When just doing this now I noticed something odd as well
As soon as I do the position change and move the symbol to the right, if I try to add the "color keyframe" on the last frame of the tween, I am not allowed to do so. "color" and "filter" are greyed out. I would prefer to lock the alpha at 100 in the last frame while the playhead is in position before setting it down to 0 in frame 1. Oh well.
Seems you are forced to
-go back to the beginning of the tween
-adjust the alpha
-then go to the end and manually bring the alpha back up.
hmm maybe i'm missing something too:)
the best way to do this would be to have the foresight ahead of time to do the alpha
-place the symbol
-alpha 0
-add motion tween
-in last frame move the symbol set alpha to 100 (alpha and position keyframes are automatically set)
So if you do it right the first time, its easy. If not, well.
Keep in mind an object will maintain the properties it has set in frame 1 unless a subsequent property keyframe enforces some adjustment.
If you have have an object that is moving from point a to b to c to d:
If you alter the alpha at point b, the alpha will tween from point a to b, but will maintain the new alpha to c, to d.
If you scale the clip by 200% at point, its scale will tween from point a all the way to point d, NOT just from c to d
To scale from point c to d only, set a "scale" property keyframe at point c (this will lock the objects scale at 100) THEN scale to 200% at point d
It takes a good deal of practice. I found the hard way that you just can't "wing" it. It isn't very intuitive coming from a classic tween approach.
These articles really helped me:
http://www.adobe.com/devnet/flash/articles/motion_migration_guide.html
http://www.adobe.com/devnet/flash/learning_guide/animation/
Take note of the tips on "cntr-clicking" frames and "shift-dragging". You have to really get used to a few keyboard modifiers when editing the timeline.
Stick around the forums. A lot of good info comes through daily.
Carl

Problem with Motion

I am using motion since long time. But yesterday unexpectedly my Motion failed. Dont know what happened. But now i couldn't open any existing motion file. It shows error. "Could not open file." I tried to install motion again. But it could not solved my problem. What can i do now?

Welcome to the forums. FYI, a more descriptive title can help getting a response quicker... Nearly all posts are about a problem with Motion...
See if this helps...
http://support.apple.com/kb/TS3061
Patrick

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

CS5 Problem with box positioning

CS5 Problem with box positioning. 0 Point for box positioning is on the right side now, how can I change it so its on the left side of the box again?
(When I started to work on my document all of my text boxes were positioned at 20px now they are at 180px and they are 160px width)
Thanks in advance!

Without a screen capture showing a bit more about what you mean, I can't tell if this is just a case that you need to reset the zero-point on the ruler (or change from ruler per page to ruler per spread or ruler on spine...) or some other problem entirely.
You can embed a screen capture in a post using the camera icon on the web page like this:

Problem with ALV search help Dictionary Search Help

Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
Miko

Hello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko

I restore my iphone 3gs but after that iTunes show a message there is a problem with your iPhone, help me please

i restore my iphone 3gs but after that iTunes show a message there is a problem with your iPhone, help me please

Yes. Talk to whoever replaced the battery. Sounds like they broke something.

Help with Motion Tweens and Designing

So we are basically trying to design part of a website
and we want to have the whole alphabet at the top of the page then we want like one letter to shake
and then fall into a funnel which we want to be in the middle of the page then another letter shakes, then two at a time, the three at a time and after that all the letters fall in.
After that we want the letters to fall out and form and sentence, a few sentences.
That's basically all that was thought about, and we are new to flash so we were looking for any tips, or any help to actually do this
we were trying to mess wit the motion tween but we never figured out how to make it shake how we want it to, so any help will be appreciated.

var growFactor:Number = 0.01;
var shakeFactor:Number = 0;
var xDirection:int = 1;
var yDirection:int = 1;
var control:Number = 2.0;
var MOrigin:Number = M.x;
var OOrigin:Number = O.x;
var IOrigin:Number = I.x;
var TOrigin:Number = T.x;
function shakeIt(evt:Event):void {
     // move A
      M.x = MOrigin + Math.random()*shakeFactor*xDirection*control;
      M.y = MOrigin + Math.random()*shakeFactor*yDirection*control;
      O.x = OOrigin + Math.random()*shakeFactor*xDirection*control;
      O.y = OOrigin + Math.random()*shakeFactor*yDirection*control;
      I.x = IOrigin + Math.random()*shakeFactor*xDirection*control;
      I.y = IOrigin + Math.random()*shakeFactor*yDirection*control;
      T.x = TOrigin + Math.random()*shakeFactor*xDirection*control;
      T.y = TOrigin + Math.random()*shakeFactor*yDirection*control;
      // flip coins to see which way to move things next time
      if(Math.random() < 0.5){
            xDirection *= -1;
      if(Math.random() < 0.5){
            yDirection *= -1;
      // shake a little more each time
      shakeFactor += growFactor;
M.addEventListener(Event.ENTER_FRAME, shakeIt);
O.addEventListener(Event.ENTER_FRAME, shakeIt);
I.addEventListener(Event.ENTER_FRAME, shakeIt);
T.addEventListener(Event.ENTER_FRAME, shakeIt);
The problem is that M is shaking in place where i put him and anothers letters are in strange position down look here http://robinmd.nm.ru/new/Untitled-1.html I wold like to put them on one x line whats wrong in the code?=)

Problem with Motion Menus

I'm using iDVD 6.0.4 and am having a problem with the menu system.
Everything is fine, and the project is about ready to burn, however whenever I go to add a still picture for the background of the two Chapters selection screens, the Motion Menus time jumps from 4:45/15:00 to over 15:00 by just adding one picture.
What is causing this, and how do I get it to stop!?
Any help would be appreciated.
Thanks...
Mike

I had the same problem. Took ages to figure out the problem and the error message does not show up in the manual, though the 15 time limit for 4:3 is mentioned. Does this work better in iDVD08?

Indesign CS5 - Problems with PDF-Export

Hello community,
we do have a problem with Indesign CS5 and exporting data into PDF. It is about that logo on that white surface, which doesnt come along with the rest after the pdf-export. What we did was: We created that white surface in Indesign itself, put an effect on it with the Indesign effect gallery and then imported the logo in the surface ... the logo itself is .psd data. So, if we export it into pdf like that, it is just dissapeared. Does anyone have had a similar problem and what can be done about it?
By the way ... if you put, for example, a simple backgroundshadow on a picture ... done also with the Indesign effect gallery, then you get just a white surface instead of the shadow, after the export into pdf. It does maybe correlate with the other problem ... not sure. Any suggestions?
Thank you very much for your help and kind regards ...

I would create the entire logo, including the white background, in Illustrator, save as PDF and place that in ID.

Some very weird issue with Motion tween

Hello, guys! I confronted some kind of weird problem. I uploaded it in fla, https://www.dropbox.com/s/u9bkjiokk51m1o3/landscape_START.fla. Soo, about the problem, flowers in layers 8,9,10 act wrong, when im trying to apply motion tween, they move from their current position right to the hell another one, and i can't understand why. Can somebody explain me what the matter? Because the rest of objects in another layers make it right, when i use motion tween. Oh, and btw, when you make zoom like 50% and less, u can see the workplace consist of gray square in dark gray square, again, wtf? When i make sizes in properties panel larger, it just goes crazy.

Emm, i meant that you should make motion tween by yourself to see that problem with flowers on layers 8,9,10. You just selecting any frame you want, then applying motion tween on flower on layer 8,9 or 10 and then puff, its like screwed up. Well, i tried to copy and replace this flower movie clips, but its always the same. For example, the rest of objects, when you apply motion tween on em, dont changing their location...

Trouble with Motion Tween (Can't find answer)

Hello,
I've been having trouble using a motion tween in an animation I'm creating. I have an object (a cartoon character's talking head) that I'm trying to move along a motion tween. At one point I want to make him stop moving for a beat, then continue. However, when I have two keyframes in the same place, the object will move up and down between the two keyframes that have the same position and rotation. When I click on the tween's path, I don't see anything that would make the object move (at least I don't think so, it's a small movement),
I looked around and couldn't find any fixes on the interwebs. However, it does seem similar to the "boomerang effect" of motion paths in AE. Especially since it appears to only happen when I make the motion paths into a curve.
I'm using Flash CS4.
Any help would be greatly appreciated!!

i'm not arguing with you. i'm just telling you how to prevent tweening between two frames.
if you want to do it your way, do it your way. but, while it may seem obvious to you that there should be no tweening between two keyfames with identical content, it's not obvious to flash especially when you add a motion tween between those two identical keyframes.
that said, you should double check the two keyframes and make sure the object's properties are indentical (using the properties panel).

Problems with Motion 2 / FCP-Interaction

Hi!
Somehow Motion 2 and FCP 5.1 don't play too well together on my system. Here's the problem:
I am producing tutorial movies for a certain application. My workflow is as follows:
1. Record screen movies with SnapZ Pro. I use the Animation codec, resolution 1152x720.
2. I import the clips to FCP and render them. The clips rendered by FCP have a data rate of 4.2 MB/sec.
3. I want to add text overlays to some clips, so I send those clips over to Motion 2. Here is where the first problem occurs: Motion doesn't import properly from FCP. Let's say, the clip I send to Motion runs 50 seconds. Motion will play the clip for about 3-5 seconds and then freeze the video, whereas the audio continues playing. I resolve this problem by deleting the faulty video track that FCP has created in my Motion project and then importing the corresponding video file manually into Motion 2.
4. I do my Motion stuff and save the file.
5. Back in FCP, I have to render the clip again. Sometimes I have to reconnect the clip with the Motion file, sometimes not. Don't know why.
6. After rendering, the second problem occurs. The video clip is blurry. By right-clicking the clip I get to open the object settings I find that the data rate of the clip altered in Motion is only "500/s". Also, there doesn't seem to be codec anymore.
For illustration I habe posted two pictures. First, the original clip created with SnapZ and imported to FCP:
http://homepage.mac.com/cmeermann/filechute/Original%20Clip.jpg
Now, here's how the clip looks like after altering it in Motion and rerendering it. As you can see, it is quite blurry:
http://homepage.mac.com/cmeermann/filechute/Motion%20Clip.jpg
My client is waiting for results, so I'd really appreciate some quick answers.
Thanks in advance,
Christian Meermann
iMac Core Duo Mac OS X (10.4) 1,5GB RAM
iMac Core Duo Mac OS X (10.4) 1,5GB RAM

happy to help...
New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

I am having a problem with ICLOUD. Help!

I am having a problem with my icloud. So here is the story. I had iphone 4. My contacts were backed. Someone stole my iphone. I got a new iphone 4s. My contacts did not sync from my previous iphone 4. so someone told me to restore to iphone 4 backup. I did. And wow! i got all my contacts back. I want all my contacts to be saved. And i don't want to lose them, it took me a while to build this list properly. With email and number and address.
Here is what i tried so far, i backed up from itunes to computer, then backup to icloud, then I did from my phone, i turned the contact switch on also, and the swtich on to back up to icloud. When I go to icloud.com. it's not there. If anyone can help me with this issue I would appreciate it. because i have a lot of contacts, and I need to save them in a way, I won't ever lose them.

You would need to backup into icloud again also if you have enough room to backup. If not purchase more icloud backup or backup to itunes. Sync your contacts back to your email where they will always be.

Problem with nokia 6151:help me!!!

hello,
i have a nokia 6151 and i have any problem....
-when the mobilephone is starting is very slow and the screen si light on only for five seconds and after is light off. this phone haven't OS and i don't know because it have need more time for to start;
-when i use phone in a call suddenly switch off...i don't know why...i buyed this phone only 5 mounths ago, and i don't use it more...
-when i find files in the gallery,i wait many time for to show this...i haven't many files in my gallery...
i change old software with new but the problems is the same.
Please, can someone help me?
tnx so much,
Simo

Please try using the phone without a Memory Card instered. If this solves the problem then you have got a bad memory card. I have had similar problem with a Nokia 6230i with a defective MMC card.
Experience and persistence are second to none just ask user one.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question...

CS5 - problem with motion tween..HELP!!

Similar Messages

Maybe you are looking for