CS5 problem with static text in Index

When I increased the font size in the paragraph style for my Index entries, the static text (See, See also, etc.) didn't increase to match it. How can I change the style of static text?

If you go and check under your character styles you should have an option for the index cross reference. Set it to the same size as the rest of the text for your index.

Similar Messages

CS5 Problem with box positioning

CS5 Problem with box positioning. 0 Point for box positioning is on the right side now, how can I change it so its on the left side of the box again?
(When I started to work on my document all of my text boxes were positioned at 20px now they are at 180px and they are 160px width)
Thanks in advance!

Without a screen capture showing a bit more about what you mean, I can't tell if this is just a case that you need to reset the zero-point on the ruler (or change from ruler per page to ruler per spread or ruler on spine...) or some other problem entirely.
You can embed a screen capture in a post using the camera icon on the web page like this:

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Adobe form -- Issue in Displaying Dynamic text along with Static text

Hi All,
I am having an issue when i am displaying a dynamic text along with static text in adobeforms.
The dynamic text is slightly coming down and not aligned with the static text. i can see half row it is coming down.
how to align both texts to be printed in same format.
Request all of your expert advices in achieving this .
Thank you in advance.
Thanks&Regards,
Phani Miriyaila.

Hi,
Select both dynamic and static text in the layout. Goto Object palette -> Layout. Give values to X,Y coordinates and Height & Width. Anchor properly and specify margins as well.
Select both dynamic and static text in the layout. Right click on it and goto palettes -> Paragraph. It gives you the text alignment options. Align the text and give similar font and size.
Thanks & Regards,
Sanoosh

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

Problem with selecting text in Adobe Reader XI

Hi all, I am encountering a problem with Adobe Reader XI and it is very strange I could not find an alike issue on the internet so I guess I have to submit a question with it.
So here it is, I am using Adobe Reader XI Version 11.0.2, operating system: Windows 7. I do not know it starts from when but it has the problem with selecting text - to be copied in pdf documents. I ensure that the documents are not scanned documents but word-based documents (or whatever you call it, sorry I cannot think of a proper name for it).
Normally, you will select the text/paragraph you want to copy and the text/paragraph will be highlighted, but the problem in this case that I cannot select the text/paragraph, the blinking pointer (| <-- blinking pointer) will just stays at the same location so I cannot select/highlight anything to be copied. It happens oftenly, not all the time but 90%.
This is very annoying as my work involves very much with copying text from pdf documents, I have to close the pdf file and then open it again so I can select the text but then after the first copying or second (if I am lucky), the problem happens again. For a few text I have to type it myself, for a paragraph I have to close all opening pdf documents and open again so I could select the paragraph to copy. I ran out of my patience for this, it causes trouble and extra time for me just to copying those texts from pdf documents. Does this problem happen to anyone and do you have a solution for this? I would much appreciate if you could help me out, thank you!

Yeah, I totally agree, this is very strange. I have always been using Adobe Reader but this problem only occurred ~three months ago. It must be that some software newly installed I think. But I have no idea.
About your additional question, after selecting the texts and Ctrl + C, the texts are copied and nothing strange happens. It's just that right after I managed to copy the texts, it takes me a while to be able to select the texts again. For your information, I just tested to select the texts and then pressed Ctrl, the problem happened. And then I tried pressing C and then others letters, it all led to the problem.
I guess I have to stick with left-clicked + Copy until I/someone figure the source of this problem. Thanks a lot for your help!

Problem with append += text in Text Field

Hi guys
i have a problem with append text.
I have one array which contain some city names, like CityArea=["NAME 1", "NAME2" ...etc];
Then i have one String and one Text Field.
Using for loop im getting right results. But when im running script again then im getting same text again.
F.ex.
First time:
City name: Name 1
City name: Name 2
Second time:
City name: Name 1
City name: Name 2
City name: Name 1
City name: Name 2
I have tried to make TextField to and String to Null and delete it, but it's appearing again.. :/
How to avoid this?
Here is script:
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
_CityAreaTF1 = new TextField();
_CityAreaTF1.border = true;
_CityAreaTF1.wordWrap = true;
_CityAreaTF1.multiline = true;
_CityAreaTF1.selectable = false;
_CityAreaTF1.antiAliasType = AntiAliasType.ADVANCED;
_CityAreaTF1.name = "CityAreaTF1";
_CityAreaTF1.embedFonts = true;
_CityAreaTF1.htmlText = _CityAreaString1.toUpperCase();

I think i found why.
There was no problem with TextField.
There was a problem with Array. "CityArea"
So each time I executed script it added new string in Array. And that is because i got like:
TextField
City 1
City 2
City 1
City 2
Running this script is Ok:
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
But outside of this for loop there is another for loop for adding Cities in CityArray.
I fixed it by adding empty array at the start of function
function myFunc():void
CityArea = [ ]; // Empty array fixed this issue
// LOOP FOR ADDING SHOPS IN CITY AREA
for (var j:int = 0; j < _Shops; j++)
CityArea.push(_Shop);
// FOR LOOP TO ADDING SHOPS IN STRING
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
Thank you for your help kglad

CS3 - Problem with dynamic text -

Hello,
I have a problems with my text, when i write a few ligne inside a dynamic text box, if i selec the text and by the way drag it down the first line goes up and disapear. Is there any way to solve this?

This is the Flash Player forum; please post your question in the appropriate product forum.

Problem with the text from previous year in current year appraisal (PPR)

Hi Gurus,
I have some problem with the text from the PPR of the previous year in the PPR current year.
The text from the previous year have not the same displaying in the tab "previous year" of the current year PPR.
EXAMPLE :
this is write in the PPR of year 2009 in Individual Targets without Incentives (tab My S-imple) :
-Aufrechterhaltung der MA motivation, in dieser Zeit der Neuorientierung.
-G1 Unterstüzung
-Fachübergreifende Teamarbeit ausbauen
Gefährdungsbeurteilung weiter führen
-tragen von PSA einfordern
-VI Opt.(Intervalle)
-Azubi und Praktikanten AUsbildung unterstüzen
and this is what I have in the PPR of 2010 in Individual Targets without Incentives (tab Previous Year's Targets):
-Aufrechterhaltung der MA motivation, in dieser Zeit der-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
there is the error, all the end of the text isn't displayed and the begin of the text is repeated.
I think that this issue is created at the creation of the PPR.
If someone have a idea he is welcom.
thanks and regards

Hi,
Please follow the note:425601,
Go to Tcode: OBA5 change the error messge into warning message. carry out the settlement and roll abck the warning message into the error message after sucessfull settlement.
Reward points if found useful.
Thanks!

Problem with sending text messages replies

After update to OS 3.0 I have problem with sending text messages:
- I CAN send new text message to someone but
- When someone REPLY me, then I CANNOT send next message in conversation
- If I DELETE someone's reply from that conversation text message sends fine.
Anyone have this problem? I have iPhone 3g with OS 3.0 update, previously on 2.x the problem didn't appear. Carrier Orange in Poland

no my girlfriend, was useing my old N75, now she is useing her old phone last night and today. we have been texting with no problems at all. ..so i'm back in the iphone, and we're going to get her a new phone tonight,or she's going to use one of my other back-up phones till we get one for her. called at&t today to see if she could get an early upgrade before oct. just to make me happy with all the BS i've been through (10 hours or more on the phone trying to fix the problem). but at&t came through with their great customer satisfaction!!! NOT!!! so, gonna try and get her a good phone out of contract and see after hers and mine are up might just jump from at&t. very unhappy with them as how they handled this whole thing.

Premiere Elements 13 , Problems with new text/titles

Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.

High ATR,
Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
Grafikkarte: NVIDIA GeForce 8800 GT
If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
Project settings are the following:
General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
The video is a mixture of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
Thank you for your service.
thomasd
Von: A.T. Romano
Gesendet: Sonntag, 1. Februar 2015 23:55
An: Thomas Deschler
Betreff: Premiere Elements 13 , Problems with new text/titles
Premiere Elements 13 , Problems with new text/titles
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822>

Problems with recieving texts?

I am having problems with recieving text messsages, today I only had 2 hours that I recieved text messages. This has happened a few times, and when I take my phone to the verizon store they say there is no problem. Has anyone else had this problem?

hoovie,
I'm sorry to learn you are having issues with your text messaging. Just so I know I am up to speed, are you getting messages delivered to your phone on a 2 hour delay or do you have only a 2 hour window where you can receive any messages? Does this happen with only specific persons? Are you having any trouble sending text messages throughout the day?
Please advise more information so I can help further.
Thanks
AdamE_VZW
Follow us on Twitter @VZWSupport

ID CS5: Problem with Text Wrap being Forgetful :(

I am having a problem with text wrap. Whenever I open this INDD file I am working on now, some of the images shift from having what I call "actual" text wrap to having "false" text wrap. "Actual" text wrap *actually* wraps the text around the image as it is supposed to; "false" text wrap says that "Wrap Around Bounding Box" is applied to the image yet no text is wrapped. After opening the file, making sure to unset and reset the text wrap on each offending image to show an "actual" text wrap WITHOUT changing layer order, saving the file, closing, and reopening, some images have "false" text wrap again! This is a 77 page document with images on every page.
Another occurrence is if I largely change the flowed text. If I must remove a paragraph on page 7, for example, then the "actual" text wrapped images on page 10, 12, and 18 change to "false" text wrapped images and I have to reset the text wrap on each image. There are often images in between offending ones that DO NOT change, but it doesn't seem to be the same ones each time. So once image A, C, and D will change to "false" text wrap, while B, E, and F are fine; the next time, A, B, and F are wrong and the others are fine. This is driving me crazy as I have never in 8 years of using InDesign encountered a problem using Text Wrap. Please note:
Ignore Text Wrap IS NOT selected.
The text box IS below the images.
The copy is flowed throughout the document.
Preferences>Composition>"Text Wrap Only Affects Text Beneath Selected"" DOES NOT FIX IT.
"Wrap around bounding box" IS showing as selected for the image/images.
There is NO CLIPPING PATH / PHOTOSHOP PATH / ALPHA PATH on these images.
The images / text box order is not changed between being correct and being incorrect.
Anyone else with this trouble? And, if so, how did you fix it? Thanks,
A. Henson
InDesign 7.0.3
iMac i7
8GB RAM
OS X 10.6.6

@henson26,
I emailed you offline to see if you can provide me with an example file that shows the problem.
Matthew

Problem with oracle text indexes during import

We have a 9.2.0.6 database using oracle text features on a server with windows 2000 5.00.2195 SP4.
We need to export its data ( user ARIANE only ) and then import the result into another 9.2.0.6 database.
The import never comes to an end.
The only way to make it work is to use the "indexes=n" clause.
Then ( without the indexes ), we tried to create manually the oracle text indexes.
We get this error :
CREATE INDEX ARIANE.DOSTEXTE_DTTEXTE_CTXIDX ON ARIANE.DOSTEXTE (DTTEXTE)
INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('lexer ariane_lexer stoplist ctxsys.default_stoplist storage ariane_storage');
ORA-29855: erreur d'exécution de la routine ODCIINDEXCREATE
ORA-20000: Erreur Oracle Text :
DRG-10700: préférence inexistante : ariane_lexer
ORA-06512: à "CTXSYS.DRUE", ligne 157
ORA-06512: à "CTXSYS.TEXTINDEXMETHODS", ligne 219
We then tried to uninstall Oracle text and install it ( My Oracle Support [ID 275689.1] ). The index creation above still fails.
We also checked our Text installation and setup through My Oracle Support FAQ ( ID 153264.1 ) and everything seems ok.
Do we have to create some ARIANE* lexer preferences through specific pl/sql ( ctx_report* ? ) before importing anything from the ARIANE user ?
What do we need to do exactly when exporting data with oracle text features from one database to another given we used to restore the database through a copy of the entire windows files ?
Is there a specific order to follow to succeed an import ?
Thank you for your help.
Jean-michel, Nemours, FRANCE

Hi
index preferences are not exported, ie ariane_lexer + ariane_storage, only the Text index metada, thus the DRG-10700 from index DDL on target/import DB.
I recommend to use ctx_report.create_index_script on source/export DB, see Doc ID 189819.1 for details, export with indexes=N and then create text indexes manually after data import.
-Edwin

Problem with black text in InDesign CS5

Hi,
I just got an information from my printer that there is a probem with some text in a PDF files which I've sent to them: they appear in 4 colors. I've exported the file with rich blacsk, for printing (best quality print). Any idea why this might have happened?
Thanks in advance

need more information about the file and how the PDF was made.
is the text that the printer is concerned with:
* text composed in the indesign file; or
* text within an advertisement or graphic made by yourself or a third party?
prior to making the PDF, did the OP check the separations using the separations panel and see four colour blacks, or did the black appear fine?
how was the PDF made? using a default setting (listed in square brackets within the PDF options) or a customised setting made by the OP? what happens when using a different setting, such as [PDFX3 2002] ?
the only way that i can get [black] text from indesign to fault like the OP says is to export the PDF using the [Smallest File Size] setting which would turn the entire job RGB... and create other prepress headaches which the printer would complain about first.
however, if the type was DELIBERATELY made rich black in indesign (e.g. process colours in addition to black to make the black) then i can see why the printer would complain. IMHO I will use rich blacks in solid fills which appear over pictures so that the pictures beneath do not show through and to show a "richer than normal" black... but I WOULD NOT use it on black type under 60pt in size, moreso if the type is thin. Doing so makes it harder to register the colours on-press and isn't normally necessary on body type.
see if this link helps: http://wp.me/p1x3Yg-W

CS5 problem with static text in Index

Similar Messages

Maybe you are looking for