CS5 Publishing Problem about ActionScript

Hi ,
I prepared a project and i can published it without any error.Action folder includes actionscript files.But when i decompile the swf file there isn't action folder and actionscript files are missing.Please help me it's too important for me.
NOTE : On CS4 I didn't face a problem like this and i could see Action folder when i decompile the swf file.

No ,as I say on CS4 I didn't face any problem but on CS5 this problem occured.
NOTE : On CS3 there isn't any problem too..Only on CS5..

Similar Messages

  • How to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

    how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

    Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.

  • A problem about Chinese encoding

    When i access portal by SSL,I find one or two problems about encoding.
    reshow these problems:
    1. Locale be set to Chinese(zh_CN)
    2. access portal by SSL
    3. Administration/create portlet
    Then the popup window's title will show a bad encoding.
    otherwise,if i search chinese, then only have bad encoding shown in the searchbox and i can't get anything.
    MY running enviroment:
    windows 2003
    plumtree foundation v6.0
    plumtree publisher v6.2
    tomcat 5.0.58 with jre_1.4.2.08
    MSSql 2000 sp4
    and I have tried other BEA ALUI newer version,I can get these problems.
    I'm appreciated for any help.

    ANSI 0xFF is NBSP. NBSP in Unicode is 0x00A0... so neither 0x00FF (which is �) nor 0xF5F8 (which is in the "private use" range) is correct. Something really weird is going on.We are talking about CP1252 and in CP1252 0xFF is �
    (see http://czyborra.com/charsets/iso8859.html for example) and thus is \u00FF correct.
    btw. I would never use windows notepad as reference application.

  • Unexpected Publishing Problems

    I have been using iWeb for almost two months with no publishing problems. I publish to a folder then ftp it to my yahoo server. However, last night I began to experience publishing problems. iWeb publishes just the first five pages of my site then I get a message that an unexpected error occurred. No other clues as to why it could be happening.
    The last change I made was an adding a podcast. I deleted that podcast thinking that maybe iWeb didn't like the taste of it and tried to publish but it still won't work. I've tried about 10 times, with my screen saver turned off, battery charger plugged in, and no other apps running.
    Please help me!
    Ruben
    G4 17 inch Powerbook   Mac OS X (10.4.5)  

    Here's the latest...
    I realized that iWeb stopped publishing at the same page (I have 30+ pages on my site. It would always stop at the fifth one). So, I rearranged the order of that page, dragging it down to the very bottom of my site list. When I went to publish to folder, iWeb published everything then stopped again at that specific page. So here I thought I had isolated the issue.
    I created a new site and dragged the problematic page into it. I then created a brand new page in my main site and copy/pasted the old content into it. Ergo: a whole new page. I went to publish with iWeb cranking along nicely until it got to the NEW version of that page and then it crapped out. Again.
    I am guessing that one of the images (or who knows what, really) is messing with iWeb's fragile ego. I am going to reconstruct the page with brand new copies of the images that were on it. Images, by the way, that published fine for almost a month and that I didn't alter at all.
    Wish me luck all. I'll keep you posted.
    Ruben

  • CS5 stroke problems

    Hi guys.
    Yeah, i know, actually there's a discussion here about cs5 stroke problems.
    But my problem is a little bit different (sorry if i'm wrong).
    If i just draw an open path i can use any stroke weight i want to, but if i join the path with another open path or close the path that i'm working, it automatically changes the stroke to 1pt and i can't change its weight.
    Well, i could be wrong, but any adobe program uses XML in order to create anything and any file, right? So, is there any way to change this information edditing this XML?
    Maybe this can help us to change some settings that we cannot change after we create a new document (like "align new objects to pixel grid").
    Thanks for reading.
    Cheers.

    If i just draw an open path i can use any stroke weight i want to, but if i join the path with another open path or close the path that i'm working, it automatically changes the stroke to 1pt and i can't change its weight.
    That's not the normal behaviour. Elaborate what you're doing in detail.
    Well, i could be wrong, but any adobe program uses XML in order to create anything and any file, right? So, is there any way to change this information edditing this XML?
    What is the background of that assumption?

  • An old and difficult problem about "UnsatisfiedLinkError"

    Hi dear all,
    I have been struck with the problem about "UnsatisfiedLinkError". I have a c++ class HelloWorld with a method hello(), and I want to call it from within a java class. In fact, I have succeeded in calling it on the windows platform. But when I transfer it to linux, the error "UnsatisfiedLinkError" comes out. I have tried to take the measures as Forum has suggested, but it failed.
    The source code is very simple to demonstrate JNI.
    "HelloWorld.h"
    #ifndef INCLUDEDHELLOWORLD_H
    #define INCLUDEDHELLOWORLD_H
    class HelloWorld
    public:
    void hello();
    #endif
    "HelloWorld.cpp"
    #include <iostream>
    #include "HelloWorld.h"
    using namespace std;
    void HelloWorld::hello()
    cout << "Hello, World!" << endl;
    "JHelloWorld.java"
    public class JHelloWorld
    public native void hello();
    static
    System.loadLibrary("hellolib");
    public static void main(String[] argv)
    JHelloWorld hw = new JHelloWorld();
    hw.hello();
    "JHelloWorld.cpp"
    #include <iostream>
    #include <jni.h>
    #include "HelloWorld.h"
    #include "JHelloWorld.h"
    JNIEXPORT void JNICALL Java_JHelloWorld_hello (JNIEnv * env, jobject obj)
    HelloWorld hw;
    hw.hello();
    All the files are in the same directory and all the processes are under the dirctory:
    1. javac JHelloWorld.java
    2. javah -classpath . JHelloWorld
    3. g++ -c -I/usr/java/jdk1.3/include -I/usr/java/jdk1.3/include/linux JHelloWorld.cpp HelloWorld.cpp
    4. ld -shared -o hellolib.so *.o
    5. java -cp . -Djava.library.path=. JHelloWorld
    Exception in thread "main" java.lang.UnsatisfiedLinkError: no hellolib in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1349)
    at java.lang.Runtime.loadLibrary0(Runtime.java:749)
    at java.lang.System.loadLibrary(System.java:820)
    at JHelloWorld.<clinit>(JHelloWorld.java:7)
    Tried another measure:
    i) export LD_LIBRARY_PATH=.:$LD_LIBRARY_PATH
    ii)java -cp . JHelloWorld
    The same error came out as above.
    I really don't know what is wrong with it.
    Would you like to help me as soon as possible?
    Thanks.
    Regards,
    Johnson

    Hi Fabio,
    Thanks a lot for your help.
    It is very kind of you.
    Regards,
    Johnson

  • I purchased CS5 Design Standard about 5 years ago. Now I am trying to install  second PC, but I got a message like " This serial number is not correct."  I want to know the correct serial number, but I missed my ex adobe ID because I've changed my E-mail

    I purchased CS5 Design Standard about 5 years ago. Now I am trying to install  second PC, but I got a message like " This serial number is not correct."  I want to know the correct serial number, but I missed my ex adobe ID because I've changed my E-mail address.

    It is not clear to me what your issue is with not being able to sign in to your Adobe account to find the serial number.  You should still be able to sign in and find your serial number if you registered the software.
    If your first PC is a Windows machine you might be able to extract the serial number from it using the Belarc Advisor
    http://www.belarc.com/free_download.html

  • A problem about calling Labview vi in VB

    Hi all:
    I meeting a problem about data transfer and parallel operation between VB and Labview.
    Actually, I want develop a VB program, in which, the Labview VI can be called and corresponding parameters can be transferred to Labview. and then, I also can operate my system by VB program at same time. something like parallel operation (VB and Labview program).
     But the question is :
    1.   If I use "Call" method of ActiveX in VB,  and the LabVIEW subvi is not stopped (for example, a loop structure), I can not do  parallel operation on VB program. The error message is "other application is busy" which is attached below. The sample codes is also attached.
    2.   I tried to use other methods like "OpenFrontPanel" and "Run", but I am not sure how to transfer the parameter??
    3.  Then I tried to use "SetControlValue" to set the parameters, but there is a error " := expected", which is very strange, because the statement  I wrote is followed with the help documents [ eg: VI.SetControlValue ("string", value)], why it is still need a "=" ??
    Does anybody know something about it? Thanks a lot
    Message Edited by hanwei on 11-07-2008 03:18 PM
    Attachments:
    vb_labview_error_message_1.JPG ‏14 KB
    VB_to_LV.zip ‏10 KB

    I sure hope OP has solved it by now.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • Problem about Handling of Empty Files in File Adapter

    Hello everyone,
    NetWeaver 2004s --- XI
    In Sender i have a File Adapter.
    Now i meet a problem about Handling of Empty Files. When i send empty file, but don't cerate a leer message.
    I have seen following text in help document. But in adapter configuration i can not find the correspond parameter.
    can you give me some tips?
    Thx in advance
    best regards
    Yaning
    SAP Help Document über File Adapter
    +Handling of Empty Files
    Specify how empty files (length 0 bytes) are to be handled.
    &#9675;       Do Not Create Message
    No XI messages are created from empty files.
    The files are processed according to the selected Processing Mode.
    For example, if the processing mode is Delete, empty files are deleted in the source directory.
    &#9675;       Process Empty Files
    XI messages are created with an empty main payload.
    The files are processed according to the selected Processing Mode.
    &#9675;       Skip Empty Files
    No XI messages are created from empty files.
    Empty files are skipped and remain in the source directory.+
    Help Docu

    hi,
    it's available since Sp19 for XI 3.0
    and the corresponding SPS fpr XI 7.0
    http://help.sap.com/saphelp_nw04/helpdata/en/44/f565854b7341e6e10000000a1553f6/frameset.htm
    so probably you need to install the new SP
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Problem about sales order stock stock transfer and batch determination

    Hi, experts, I get a problem about sales order stock stock transfer and batch determination.The following is the current situation of my system:
      In OMCG I assigned search procedure ME0001 to both 311 and 311 E and ticked check batch. After that, I found  that if iI need to tranfer unrestricted-use material from storage location 1000 to 2000 with movement type 311, I just need to input * at the field batch, then the system will display all of the available batches. But for the transferring of sales order stock with movement type 311 E, after I input * at the batch field, no batch is displayed and there is also no message from the system.
      Can anybody help me? Is there anything else I need to do? Thanks very much.

    I think my question is not clear, actually I tried 562 E , 411 E and 413 already. all the transaction looking for the sales order but unfortunatly the sales order is deleted  from SAP.

  • Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

    Hello apple
    I have the problem with my iPhone and my friends have this problem too.
    My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
    Who have this problem??

    Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

  • Problem about updating to Mac OS X 10.5.3

    Hi there,
    I just bought my Macbook two months ago. I encounted a problem about updating it to the latest version of MAC OS X. The system reminded me to restart, I proceed. Everythig looked just fine until a poping up window shown "Mac OS X 10.5.3 pacakage can not be validated". Dose anyone know what did that mean? How can I update my little mac?

    Hi Hummer,
    First, welcome to Apple discussions.
    To answer your question, your computer checks all downloaded updates before installing them. It does this to make sure it's got the entire file and that the update will install correctly. The fact that validation fails on your machine probably means the file did not download correctly.
    To install 10.5.3, simply go to this website, download the "10.5.3 combo update" and then run it on your Mac: http://www.apple.com/support/downloads/

  • Hardware diagnostic shows me a problem about charging battery. What about it ?

    Hi.
    I bought a MacBook Pro retina 13', mid 14. on last december, and after almost a month I did the hardware test of apple as the Technic support says, and this hardware test shows me a problem about charging battery, so, I wanna know what about it, is it normal ? or is it a battery problem or is it a problem about the Current adaptador ? Thank your for your answers.

    Could be battery, could be adaptor, could be the computer itself.  You will have to take it in for testing.  Fortunately, you are still under warranty.

  • The problem about vrrp

    Dear all,I have a problem about vrrp,my core switch is cisco 3750x and huawei S5700-28C-EI, after I configured vrrp between them,the switch log got the error problem as follow:
    *Jan 11 00:01:43.111: %VRRP-6-STATECHANGE: g1/0 Grp 3 state Backup -> Master
    *Jan 11 00:01:43.111: VRRP: tbridge_smf_update failed
    *Jan 11 00:01:44.187: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0
    *Jan 11 00:01:46.539: VRRP: Advertisement from 10.252.200.36 has an incorrect group 10 id for interface g1/0                
    *Jan 11 00:01:50.323: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0
    *Jan 11 00:01:51.707: VRRP: Advertisement from 10.252.200.36 has an incorrect group 10 id for interface g1/0
    *Jan 11 00:01:52.079: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0
    *Jan 11 00:01:53.079: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0
    If cisco and huawei cannot interconnect with each other?

    Can you post the interface config from the huawei and cisco device?
    HTH,
    John
    *** Please rate all useful posts ***

Maybe you are looking for