CS5 R3D Timecode Issues

I am interested to know if anyone has had this issue before, and if so, what they did to resolve it. I have R3D footage shot at 23.976 fps. When I import the clip into CS5 the timecode does not match. (see screenshot below) When I import the clip into CS4 everything lines up perfectly. Is this a bug or do I need to change settings somewhere?
I am running:
Premiere Pro 5.0.2
Windows 7 64bit
R3D footage is Red MX and Red 1 footage

function(){return A.apply(null,[this].concat($A(arguments)))}
function(){return A.apply(null,[this].concat($A(arguments)))}I am running:
Premiere Pro 5.0.2
Windows 7 64bit
R3D footage is Red MX and Red 1 footage
You have not updated to 5.0.3 ? the update is available.
For more Info-
http://blogs.adobe.com/premiereprotraining/2010/12/premiere-pro-cs5-5-0-3-update.html

Similar Messages

My Apple Macbook hard drive crashed and I had to replace. Now trying to reload CS5 and having issues. When I click download from Adobe download page, a screen pops up saying "Access Denied". I have serial number, but don't even get to a page to enter. Ple

My Apple Macbook hard drive crashed and I had to replace. Now trying to reload CS5 and having issues. When I click download from Adobe download page, a screen pops up saying "Access Denied". I have serial number, but don't even get to a page to enter. Please help…Thanks!!

Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Imovie 11 timecode issue DV tape import

Hi all,
I am having an issue with importing a DV tape of my Sony Recorder, as it skips several scenes. I have been investigating and it seems I have Timecode issue with the DV tape, It states in several forums that I have to deselect the option to "import as individual clips". However I am unable to locate this option . Can anybody help my out or give me another solution of how to solve the issue of skiping several scenes while importing?
I much Appreciate it.
Kind Regards,
WBCK

Hi
However I am unable to locate this option . Can anybody help my out or give me another solution of how to solve the issue of skiping several scenes while importing?
In iMovie 1 to HD6 - this can be selected in iMovie Pref (Settings)
in iMovie'08 to 11 - I have not found it at all !
And if the final product is a DVD - then using iMovie HD6 - WILL RESULT in the BEST POSSIBLE DVD !
As it can (opposed to iMovie'08 to 11) deliver max quality over to iDVD - and as DVDs are as standard Interlaced SD-Video - keeping this from the miniDV tape to the final DVD will Guarantee the best quality possible.
Alt. to get it in without time code
1. Use a miniDV Camera - analog out - A/D-box - FireWire in to Mac
or
2. Make a miniDV tape Copy. From Camera A - via FireWire - to Camera B - BUT TO GET THIS OK - the new tape must be DUMMY RECORDED - full tape out.
Just set one Camera to record it with just about anything (a wall or other not interesting) - and the full 62 minutes !
Then re-wind it and now record the copy onto it - THIS TO GET ONE UNBROKEN TIMECODE
This also needs a 4-pin to 4-pin FireWire Cable - BUT will give an unbroken miniDV tape Copy.
• USING A CLEANING miniDV tape - from time to time - is also a good strategy to keep broken timecodes to a minimum.
• SO ALSO - Recording the full tape before - Viewing (rewinding) it or even WORSE - unloading it (DON'T DO IT).
Some Cameras has a FIND END of Recording - to take up recording next sequence without any code breaks - Use it - My Cameras has it and one can do this to 100% if tape has not been unloaded. One perfectly the other I need to back a few frames - to get it to work.
Yours Bengt W

I have opened artwork created by someone else. We are both using Illustrator CC. This particular issue shows up in Illustrator CS5 also. Issue: in the links pallet a weird gray gadient keeps replicating. I cannot identify it in the artwork. It is an embed

Hello,
I have opened artwork created by someone else. We are both using Illustrator CC. This particular issue shows up in Illustrator CS5 also. Issue: in the links pallet a weird gray gradient keeps replicating. I cannot identify it in the artwork. It is an embedded image. I cannot get rid of it and it keeps reproducing. WHAT is it and why can't I delete it?
Thanks for any help. Ingrid

Hello, yes it is reproducing over and over. I look in the original artwork and there are 28. I did not save over the original art but “save as”. Worked on the new file for a while and now there are 47!. I copied all the content to a new blank, all colors removed, file and there they were. If I click on them can’t relink, won’t show a bounding box, no frame in wire-frame, no stray points. they are ghosts. Here is an image, to give a better visual of how they look in links panel. Any ideas? Thanks, Ingrid

R3D Playback Issues in FCP-X on Yosemite

Hi all,
Fresh install of OS-X 10.10.1, FCPX 10.1.4, Red Apple Workflow 4.2. MacPro (mid 2010). Kona LHe+. 32GB. Dual RAID-1 256GB SSD (Samsung 840 Pro). ATTO FC-81EN connected to Eonstore SAN via FibreJet. nVidia GTX680 with latest 10.10.1 drivers.
We previously had OS-X 10.9.5 installed and everything worked fine.
I've got the following issues now ...
1. On the new install R3D files after import now stutter. Have clicked the Better Performance button.
2. I can't import R3D clips into previous projects that contain R3D footage already
3. R3D file icons are "EXEC" rather than a file
Not quite sure what's going on and on the verge of down grading back to 10.9.5. Any help would be greatly appreciated in trying to figure out these performance issues.
Thanks!

It seems like something is missing from your installation, so your R3D clips are not being correctly recognized.

CS5: File size issue?!

I am currently trying Photoshop CS5 and found some issues regarding memory and file size.
One issue shows up as following:
Opened a 21MP photo via Camera Raw as Smart Object, used Noise Reduction Filter and saved this one Layer image as PSD without maximum
compatibility turned on. Filesize: 222.626KB (~222MB, which is quite big i thought to myself).
Then rasterized this Smart Object and saved the image again. Filesize: 84.164KB (~84MB, which is more to my likings).
Again converted the Layer into a Smart Object, Smart Sharpened it and saved it. Filesize: 258.302KB (~258MB).
Of course i usually do not switch between rasterized layers and smart objects all the time, this was just for demonstration purposes.
Something seems strange here, why is the smart object three times larger on disk then the rasterized version?
Is it because i use a trial version???

Printing to PDF from the print box is an OS process - it takes the printer data that Photoshop sends and creates PDF from it.
Photoshop CS5 does use the newer Cocoa printing APIs, which could cause changes in the output (due to differences in Apple's code).
For saving PDF, I really suggest you just save the file as PDF from Photoshop and skip the print dialog.

Photoshop cs5 extended 3d issue

Hi,
i made a selection then i made it into a 3d layer with reproussé and then turn it into a 3d object , this part works all fine
but as soon as i accept the changes i make, and start to use the 3d rotation tool and start rotate it. my background goes transparent while dragging/rotating my object . this is very enoying coz i cannot see my background while doing this.. anyone has the same problem and or a solution to it?
i checked photoshop preferences ( CTRL + K ... performance) and played with the settings. nothing usefull. also i updated my system to the latest video drivers. everything runs smooth even photoshop.
my hardware specs are pretty decent im sure it isnt that, although i could enable or check something somewhere , who can help me about this issue...
my specs :
software :
windows 7 x64 bit
adobe photoshop cs5 extended x64 bit
Mainboard: Mainboard Model MS-7380 ( msi p7n platinum silent )
memory : 4gb dual channel
cpu : q9450 quadcore 12mb cache
video :
NVIDIA GeForce 9800 GTX/9800 GTX+
Revision A2
Codename G92
Technology 65 nm
Memory size 512 MB
Memory type GDDR3
Memory bus width 256 bits
PCI device bus 3 (0x3), device 0 (0x0), function 0 (0x0)
Vendor ID 0x10DE (0x1682)
Model ID 0x0612 (0x2371)
Performance Level 3D Applications
Core clock 740.0 MHz
Shader clock 1850.0 MHz
Memory clock 1140.0 MHz

Generally good advice is to check with nVidia on their web site and see if they have released any recent video drivers that fix the problem you're seeing.
http://www.nvidia.com/Download/index.aspx?lang=en-us
Many people are finding that new video drivers solve problems they're seeing with Photoshop.
-Noel

PS CS5 importing images issue!

Hi folks,
i got a problem with ps cs5.
I opened an 300 DPI A5 document and started to design it out.
After some time i wanted to import some of my .png files into the composition.
But then it happend, Photoshop boosted the size up of my image... its an 72DPI PNG and the old
PS CS4 used to resize it correctly and I just could start to work with the original size of that image.
for now I am very unhappy about this issue because I have to resize all those images again by hand.
That means I lose quality and it takes a lot of time.
Would be great if someone could tell me if I can workaround that problem somehow.
thank you!
Pete

I can only imagine that Adobe got feature suggestions from people claiming that when they placed their different images together they would rather have automatic resizing per the ppi value, and not hearing praise from people like you just expecting a pixel to remain a pixel, they changed it without an option to keep it the old way. I had high hopes that that checkbox in preferences would get you the older functionality back, but alas it isn't so.
What is that [ ] Resize Image During Place checkbox supposed to do anyway, if not this? A quick glance Help doesn't turn up much on this setting. Maybe it's buried in there somewhere, but it's not popping out.
I even tried placing images using all the combinations of modifyer keys I could think of. That would have been a nice touch, but nope, it didn't work.
A while back I started a thread in which I ended up actually catching some flak for asking that every change in user functionality be accompanied by a setting that allowed users to have things the old way if they desired. This kind of situation is exactly what I had in mind, but people apparently have trouble thinking at this level.
-Noel

Subclip timecode issues for MultiClip edit...Help!?!?

Here is the issue. 2 camera shoot, Cameraman 1 pushed pause during a live concert video shoot.
In order to make a multiclip edit with the other camera's footage, I have made subclips of this camera's footage on each side of the pause.
The other camera in the shoot had issues as well so I have been forced to use a sequence and alternant timecodes to line everything up with my sound file.
Everything works well until I get to the subclip after the pause. I try to modify the alternant timecode to correspond with the sequence timecode but when I enter the approporate number FCP forces a different number to appear.
My hunch is that because these are subclips of the same captured clip I am not able to modify the timecode as I want to. Can anyone confirm this hunch?
And...what can I do about this? Do I have to recapture? I hope not. I have tried to create a new master clip in the modify window but the problem persists. I am so close to getting this into the multicam editor I can taste it. Thanks.

Solved it... I ended up having to re-capture the shot after the pause so it would be a seperate media file. I guess I could have copied the file outside of FCP, renamed and imported the file seperatly... I realize this problem was caused by not setting the capture up properly to treat the jump in time code appropriately.

CS5 selection tool issues

I am running Photoshop CS5 on Leopard, and I have been having problems with the magic wand tool, and the quick selection tool. The issues with both occur only when the “Sample All Layers” is off in the top menu bar. They both work just fine when sample all layers is on. The issues are outlined below.
Magic Wand Tool
The issue that the magic wand is that anti-aliasing doesn’t work at all, while sample all layers is off. I have tried it in RBG, CMYK, with smart objects, and rasterized objects; in all cases it does not anti-alias. It has done this since I first installed it.
In the example below, is the result of a mask created with a selection made by the magic wand tool.
Quick Selection Tool
The issue with the quick selection tool is that it doesn’t select what I tell it to while sample all layers is off. I have tried this in RGB, and with rasterized objects, and smart objects; in all cases this does not work. It has also done this since I first installed it.
In the example below, I tried to select the black object and it just made a big square selection.
I re-installed photoshop, and that didn’t change anything, so that rules out any install problems.
Am I the only one having this problem? I am starting to wonder, since a bug this big would probably show up in forums across the internet.
All Help would be appreciated

I tried it in CS4, and it does both of it there too, ugh. Thats weird, I'm surprised. Especially because both tools work properly when sample all layers is on, even with geometric shapes.
Something Adobe overlooked maybe? I dunno, thanks charles.

Photoshop CS5.1 printing issue

I am unable to print anything in Photoshop. I just upgraded to CS5.1, 64-bit, from CS3. When I use the print command I get the message "The saved printer information is not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before printing."
When I click OK, I then get "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."
How can I check my printer settings or select a printer when I can't get the print dialog to appear? I get these messages no matter what files I open.
I have a second computer on which I just did a new install of CS5.1 (not an upgrade), with the same printers and drivers, and it works fine.
Any suggestions?
--Doug

There really is no such thing as an upgrade. It is all the same program, just a price break. So you probably have some printer issues left over from the previous version on the computer you "upgraded" to CS5.1.
Check to see it you have the correct printer listed.
If that looks OK you might reset the preferences and it will clean out any junk that might be a problem. Start PS and IMMEDIATELY hold down the ctrl + alt + shift keys. You should get a reset window. A little tricky, so keep trying if it does not work the first time.

PS CS5.1 installing issue

Hi everybody!
I have a valid CD KEY for PS CS5.1 extended but i cannot install the CS 5.1 application. It keeps giving me the following error:
http://i44.tinypic.com/25ujls3.jpg
Please help me! I really want to use my PS!
Thanks in advance for help!

KevinNzorsen for issues with your subscription you will need to contact out support team. We need to verify personal information in order to assist you which should not be shared in a public forum. For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6. Our chat representatives can provide a personalized experience to resolve the issue you have described.

List your CS6 to CS5.x Compatibility Issues Here

I'm in a multi office environment with a network, I'm the only staff person with CS6 and all our CS5.x users have been getting errors opening CS6 files despite me having file compatibility set to "Always":
"The document contains unknown data which will be discarded to keep layers editable..."
Warnings about missing "color books" even though I don't use PANTONE
"Could not complete your request because the file is not compatible with this version of Photoshop"
I just chatted with Adobe and after a long session here were their non-answers:
"There is a lot of features in CS6 that will not work on CS5 and we will not be able to help you in opening the CS 6 image in CS5."
"I am sorry, I understand that, however we will not be able to help you with that."
"You can disable the Third Party Plug-ins" (I'm not using any)
So... let's start our own list of KNOWN ISSUES with Photoshop version compatibilty
CS6 vector strokes. Any file I send with the new vector strokes can not be opened by CS5.x users
It seems if I flatten all shape layers and smart objects it helps, however our PSDS have hundreds of layers and even with the new search feature this is tedious. Plus you get into having two versions of a final file floating around which is a liability.
What have you found? Thanks!

c.pfaffenbichler wrote:
Not for me, again the option to »Flatten« or »Keep Layer« (in which case the [Color Lookup] Adjuszment Layer becomes an empty Layer and the appearance changes compared to CS6).
It would be sensible for a CS6-saved Max Compat document to contain a compatibility rasterization of a Color Lookup Adjustment Layer, and for CS5.x to use it instead of an empty layer when "Keep Layers" is chosen so there would be no change in appearance.
Notice that blending options and effects will be on the empty layer in CS5.1.
Either CS6 is failing to save the pixels of the compatibility rasterization into the file or CS5.1 is failing to populate its layer with pixels. Hopefully, the former and a fix will be forthcoming because there's no chance of CS5.x being updated now.
There's a similar problem with an empty raster layer appearing in CS5.1 when opening a 16-bit CS6-saved document containing a Shape Layer that has a CS6-Shape Stroke, whereas the compatibility raster layer will be correct in CS5.1 if the document is 8-bit.

Flash CS5.5 freeze issue when testing movie.

So I've been working on a new animation for several months and I've encountered a problem.
Details: After exporting the swf by testing the full movie, it plays the first four scenes, and then after that it crashes.
The symbols keep going but the movie does not progress past that scene.
I've cut the scene out, removed filters from my vcam and even tried to run it on an older version of Flash.
I read a few forums of people with similar problems and the general answer is that they have corrupt files in their library.
Apparently corrupt files in the library have a 'Preview not available' sign when you click them in the library.
After going through all my library items (It's over 2000) I do not have any with that sign.
I really need help as I've worked real hard on this project.
PLEASE HELP! I use Flash cs5.5
Thanks, Flip.

The number of frames in each scene doesn't look like a problem.
I would suggest you to Keep one scene and split your elements in Movie Clips instead of creating different scenes.
Your explanation suggests that your scenes run continuously and there is no interaction by the user. So you can easily use 6 movie Clips in the timeline instead of Six Scenes.
Let me know if this solution resolves your issue.

Premiere Pro CS4: Timecode issues (Scene Detect, Free Run)

Hi folks,
I am most familiar with Premiere Pro CS3. In the past, I have created multi-camera sequences that are synchronised by timecode. I have been shooting using the Free Run timecode feature across all cameras, as to maintain a sync'd timecode.
Now that I am using Premiere Pro CS4 at work, I am running into a few issues in preserving my timecode values during capture. I have recorded HDV footage using two Sony Z7's. I downconvert the HDV footage into DV upon capturing - this is so that I can use the scene-detect feature, and still supposedly preserve the timecode for each media file. I captured all of the tapes using scene-detect, and the timecode values were correct for each media file captured.
Having saved, closed, and reopened my Premiere Project the next day, the timecode values for the majority of the media files have been reset (ie, they all start at "0:00:00:00". This is very odd! Only a few of the media files have retained their correct timecode values.
Has anyone else experienced this? Could they please shed some light on this problem or quirk? Am I taking the wrong approach in capturing/organising media? I am following the same procedure as I had done in PPro CS3.
I have since deleted the Media Cache/Preview Files, requiring Premiere to re-index, and re-conform the media files. The timecode values are still incorrect. When I select all of my media files and tell them to go 'offline', the correct timecode values re-appear.
Many thanks for your help,
Andrew

Does anyone have an answer to this problem?? I think I am having the same problem. I don't have as much experience as the others on the
forum, but basically what I tried to do was filming a multi-camera event in free run timecode, then
captured in HDV split, and assumed I could get Premiere to align the clips accordingly. Anyone have any idea how to do this????
Any help is appreciated,
Thanks,
Aaron

CS5 R3D Timecode Issues

Similar Messages

Maybe you are looking for