CS5 refuses to print

Hopefully some can help me out here.
I've got a HDR rendered file, saved as PSD and tiff. No matter what file i choose, if i click File -> Print, nothing happens.
I can see the cursor go arround for 2 sec as if it's buisy, then nothing. No screen where i can put in all the print settings whatsoever.
I also made a "test" copy of the file, without result.
All other files i can print like it should. I'm really flabbergasted here.
I restarted Photoshop, used the 64 and 32 version, restarted PC.
Could anyone please shine some light on this?

@ Dave. Also thanks to you for your effort.
The dafault printer on my system is allready another as the printer i use for printing photo's.
So i indeed made another, new file (please see my respons above) what did the trick.
btw: when saving the original PSD towards tiff, the picture was completaly corrupted: colours gone, a black part on 1/4 or the right edge, lines all over the picture)
(i tried to upload the file here, bud .psd or .tiff is not allowed, and i can not save the file in another format any more, so i can not show it)
So in all: problem itself not solved, case for printing the file is.
Edit: i made some file changes so im now able to show you the corrupted result.

Similar Messages

A pdf document created in cs5 cannot be printed in duplex on a pc without cs5 or adobe reader pro

Hi!
there is a "normal" cs5 created pdf document.
the installed cs5 pc -> i can print in duplex on every printer, without cs5 installed duplex printing not possible.
I am searching for a solution to print the pdf document in duplex mode on every printer, but only with the latest freeware version adobe xi 11.0.3.
(If i install adobe cs4 on a pc it is possible to print the document in duplex mode on a hp3525 printer, but duplex is not possible on a ricoh printer for example mpc5502.)
I cant upload the file, because its bigger than 2 mb. (5mb)
Is there anybody out there for help.
If you need the file, i´ll send 2 u.
thx

Yep, it definitely is a complicated workflow... But I'm not really sure of any other way to get from the 34" wide pattern to the home-sewing version which is split into pages and has alignment marks and whatnot. I'm very much an amateur that has figured it out as I went
I went through the page in the photo pretty thoroughly with the layer panel and I couldn't find any mystery lines... But I did find something interesting; when I click on any of the pattern lines, it shows the whole line of the pattern piece, which extends well past the edge of the artboard. So when I'm printing the poster-sized PDF to 7.5x10 pages, it's keeping all the anchor points of a line even if only a small piece of that is on the actual page.
Does this help? I've included the page in the photo as well http://www.putlocker.com/file/DADB4759DBB860D8
Thanks again to everyone!
Also, should I be keeping all the files I'm editing as .ai files and then only exporting to PDF for the very final product? I was doing that at first, but then using .pdf for the whole process didn't seem to make any difference.

My HP Officejet Pro 8100 printer refuses to print in color

My HP Officejet Pro 8100 printer refuses to print in color, I have a macbook OSX 10.7. for some reason it will not print in color and I do not know what to do. please help.

Ctopkis, Make sure you have updated your firmware. Here is the link to the lastest firmware that was posted on 02-18-2012.
Firmware upgrade is for HP Officejet Pro 8100 ePrinter - N811a
Post back and let me know if this fixes the issue or not.
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP LaserJet P1006 refuses to print after a paper jam

I've used an HP LaserJet P1006 for 3 years now and it has performed without a hitch (I don't print that much). However, recently it swallowed a sheet of paper in a rather crooked fashion that left it gasping, and I had to shut it down. I was abled to carefully remove the paper after first removing the ink cartridge, but when I tried to print again, it would not do it. I went through the entire check-up procedure the manual suggests, but no dice, it refuses to print. This morning I tried something I did not tried before, which was printing a "Demo Page" under the "Print Information Pages" of the "services" tab of the "Printing Preferences" menu. To my surprise it printed the Demo Page. However, it refuses to print anything else, like the "print test page" or print from any other program. Intimidation with a sledge hammer doesn't work either. Any ideas anyone? I'd appreciate your comments. Thanks. JD
WindowsXP

Thanks for the tip Royal_KB, I tried what you suggested but no dice.
I tried the HP Print Diagnostic Utility v4.1 with the following results:
1) Before I tried to print, I clicked on the FIX button and it said: "No problems were found for HP laserJet P1006" and all checkmark circles are green. A small window pops up that states: ""The HP Print Diagnostic Utility is not detecting any remaining issues. Click PRINT A TEST PAGE to check your printer operation"". I click to print, and a second window asks if I really want to print. I say YES, but no printing takes place, the printer doesn't even attempt to print, though the light on the printer is green. So I click on RETEST I get the same behavior all over again. ""No problems were found for HP laserJet P1006"" and all checkmark circles are green. I try everything suggested by the HPPDU v4.1 and I find myself in a catch 22 situation, so I do 2) next
2) I go to PRINTING PREFERENCES > SERVICES tab > PRINT INFORMATION PAGES > select DEMO PAGE > PRINT button..............The printer then turns on, and prints a perfect demo page of the printer. I have tried to make this printer print through other programs and test pages etc. etc., but the Demo Page is the only thing it will print. I'd appreciate any other suggestions. Trebuchet candidate maybe?
Thanks
JD

Please help! Officejet Pro L7380 refusing to print

Hi,
My officejet pro had a strange power outage (nothing else, computer etc affected) and since then has been flashing and displaying the message "The following printheads has a problem: magenta/cyan" and refuses to print.
I have used the HP diagnostic tool which did not find any problems. I have also restarted both the computer and the printer as well as removing the cartridges and replacing them.
Please help!

Hello ghwhy,
It could be that the printheads needs to be reseated or replaced. Follow this document in order to clean and reseat the printheads:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01446637&cc=us&lc=en&dlc=en&product=3198092&tmp...
Remember that it's important to let the carriage move all the way to the left of the printer before you remove the printheads. If it doesn't move when you open the lid of the printer, just press and hold the OK button for a few seconds.

CS5: will only print in black and white after upgrading to yosemite. I have updated all drivers and cs5. Still prints in bw/greyscale even when picture is color. Advice?

Since upgrading to Yosemite on my Mac, photoshop cs5 will only print in bw. I can print in color from Word but not photoshop. I have updated all drivers and cs5. Any suggestions would be appreciated. Thank you!

Since upgrading to Yosemite on my Mac, photoshop cs5 will only print in bw. I can print in color from Word but not photoshop. I have updated all drivers and cs5. Any suggestions would be appreciated. Thank you!

New MacPro refuses to print

Hi guys,
my newly purchased MacPro is refusing to print over the network at my office. We have several Canon copiers, and HP printers, as well as a BestColor Rip powering 2 epson 9600s. For the life of me i can't seem to get this machine to print to any of them. Looking at Cups i see a series of "The process "fierycupsfilter" terminated unexpectedly on signal xx" errors everytime i send something.
I've tried the standard, including permission repairs, reseting the printing system, and have also tried the workaround that fixed the intel imacs, which was to copy the /use/libexec/cups/filter/fierycupsfilter from an older (PPC) machine over to the new box. All to no avail, as i still cannot print.
Does anyone have any other suggestions for me to try? While printing from this machine is not essential (it's the AV production machine), it's incredibly annoying.
TIA for any guidance you may have.
john
Mac OS X (10.4.8)

Can you tell us what protocols (LPD, IPP, etc?) you've tried? Are they all postscript printers? When you ADD in printer setup, does it find the model (which means it finds a PPD)?
If you tried LPR or IPP, did you enter the printer/RIP's internal queue name in Printer Setup?

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

Photoshop CS5 does not print amount of images accurately!

Photoshop CS5 does not print amount of images accurately!
what ever you ask for above 1 copy of an image you do not get it..
you ask for 5 you get 1 you ask for 8 you get 1.. sometimes you get the leftover amount from the previous image printed on the new image..
adobe support has no idea about this problem..I'm assuming most people print one image and they don't recognize the problem since CS5 is just on the market... try print multiple copies and see what happens?

The solution is purported to be to get a driver update.
Since the problem seems to be a "delay" or "staging" of the values being sent to the driver through some intermediate location, a workaround has been proposed that may be helpful. This may depend on the printer driver:
1. Set the copy count you want.
2. Hit the Print Settings... button.
3. Go into the Printer Driver setup screens and verify the copy count.
4. Then do the print.
-Noel

I received a .pdf document as an attachment to an Entourage Email. It refuse to print on my HP4050N printer which is otherwise performing as advertised. Printing fron the desktop, Adobe 9.4.4 nor Preview won't work. I have a PowerPC G5, OS 10.4.11.

I received a .pdf document as an attachment to an Entourage Email. It refuse to print on my HP4050N printer which is otherwise performing as advertised. Printing fron the desktop, Adobe 9.4.4 nor Preview won't work. I have a PowerPC G5, OS 10.4.11.

I think the file has somehow been corrupted. Can you have the person that sent it to you send another copy?
 Cheers, Tom

Why does my B8550 keep refusing to print saying I don't have the right paper/paper size?

I have never been so frustrated with a printer. I have never tried using it for making pictures without having problems. I buy HP paper and the printer still refuses to print...I get the message that I have the wrong paper or wrong paper size. Even if I use the option "other photo paper" to try to avoid the sensor in the printer to determine what paper is being used, I still get the same message. And I've checked and rechecked...the paper size I'm programming the printer for is the same size paper I have in the printer.
I have a pavilion g series laptop with Windows 7 64-bit operating system. I went to the hp site to download the printer drivers.
Any help would be appreciated.

Do you back up to iCloud? I'm assuming so since you asked about purchasing more storage.
Check Settings > General > Usage on your iPhone and see if you really need everything you're keeping there.

CS5 will not print on new Epson 3880, message paper out or paper not loaded correctly

CS5 will not print on new Epson 3880, message paper out or paper not loaded correctly

In the Print dialog box, click Print Settings and verify the Paper Size you chose. This is important because the 3880 has three paper feeds (auto sheet feeder, rear manual feed, front manual feed). And for each major paper size you have to choose not only the size but also the correct feed. For example, if you want US Letter, choose US Letter, notice that this menu expands to five more US Letter paper size options, and choose the specific US Letter paper feed you want.
If there is a mismatch between the paper size + feed combination you picked and the feed where the paper actually is, you can get the error that you're seeing. Because the Epson printer driver will look for the paper in a feed where there isn't any paper.
So if you've added US Letter paper to the automatic paper tray, in Paper Size double-check that you chose the US Letter submenu command that says just US Letter, not one of the other options like US Letter (Manual - Front).

PS cs5 unable to print

I have cs5 extended photoshop.
But it does not print any picture from it anymore.
But ms word can print the image inserted.
I use USB port and my pc is using window 7 ultimate.
How can I correct this problem?

My system:
Window 7 ultimum.
Photoshop cs5 extended
My printer: Espon stylus pro 4800
Problems: It print from MS Word But do not print from Photoshop CS5 extended.
Your support people tried many times to solve this problems in the last week.
But they unable to resolve it.
Jason

IMac refuses to print to network

My late 2009 21.5 inch iMac running OS X Lion 10.7.5 refuses to print to either of two printers on an ethernet network.
In the printing window, it goes through "Looking for printer" and "Connecting to Printer", the progress bar turns blue - but nothing more happens. The printer error log says "the printer is not responding".
Other Macs on the same network print fine.
Here are some of the things I have tried:
. Reinstalled printer software (a Brother HL-5370DW mono laser and Epson Stylus Photo TX810FW)
. Reset printing system
. Reset Brother printer (worked for a day on this iMac but not since, despite further resets)
. Installed completely new, clean system on a separate partition.
. On the network, changed switches, swapped over ethernet cables etc - can see other Macs and transfer files fine, just not print.
. Connected Brother direct to iMac via USB - prints fine.
Is there something else I can try? Could this be a hardware problem - obviously iMac is out of warranty/Applecare? Is there a way to reset ethernet port? I don't know what to try next, and am at the end of my tether having wasted far too much time on this without a solution...

Hmmm... I don't know the printers. One was an old one which printed fine for months (still prints from an old laptop) and the new one is an HP-printer that prints very well on the iMac from which it was borrowed cables and all. (I live appr. 700 km away so I don't always know all the details).
Anyway, the computer is an:
2.16GHz Intel Core 2 Duo
128MB VRAM
1GB 667 DDR2 SDRAM - 2x512
250GB Serial ATA Drive
SuperDrive 8X (DVDR-DL/CD-RW)
which still runs Tiger.
Different ports were tried and as far as I know the technician reinstalled the system but maybe returned all the old settings which reinvited the old fault unless it's a hardware thing.
I have fowarded the information above so it will be tried and if nothing changes I think she will try and wipe the disc with a completely new installation tonight, just in case. I told her to install the printer first to see what happens and only then install other things and set things up etc.
I'll be back here soon as I know what happened next.
Thanks anyway,
Yo

Acrobat reader DC refuses to print

I have a new installation of windows 8.1. Have just installed Adobe Acrobat reader DC.
However
1) It takes ages to load (some times 30 seconds)
2) When I give it a pdf it shows it, but the print option takes ages to appear (rendering for ages - again c30 seconds)
3) I press print - Absolutely nothing happens!!!!
Yet my old installation on a different laptop running W7 and reader x will quite happily print the same pdf of the same printer (Kyocera 5020).
This is frustrating me enormously.
My wife's PC also refuses to print pdf documents fully using DC. It will print only part of the background, but not the text.
Please help. THis should be basic and simple but even re-installing it several times has not helped.
Thanks
Phil

Try uninstalling and then re-installing. The following script may help with a complete uninstall: Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

CS5 refuses to print

Similar Messages

Maybe you are looking for