CS5 registration issues
Just bought a new MacAir and migrated everything from my old MacBook Pro to the new Air. When I try to use CS5 apps, I'm asked to provide a serial number. When I type in the serial number from the original packaging, I get a message that says the number is not valid. What do I need to do to use my CS5 software on this new Mac?
Never use migration assistant with Adobe software. Uninstall it and
reinstall it properly and note that CS5 is unsupported under Mavericks.
Similar Messages
-
Jabber for Windows Registration Issue
I have been facing issue with J4W registration and display error "no connection to server". Following is the version detail:-
Version CUCM and IM&P---> (10.5.2)
On-Premises login
During analysis, i found 2 things in logs:-
1). Unable to download jabber-config.xml file (Download of TFTP File failed for server ) //// all the other xml files are succesfully downloaded which may indicate that there is an absence of jabber-config.xml file.
2). While signing into presence "OnLoginError: (data=0) LERR_JABBER_UNREACHABLE <16>: "
[rc\cert\common\BaseCertVerifier.cpp(250)] [csf.cert.] [cert::BaseCertVerifier::checkIdentity] - About to verify the Subject Alt Name.
[ls\src\cert\common\CertVerifier.cpp(154)] [csf.cert] [cert::CertVerifier::checkIdentifier] - Verifying identity '162.20.10.30'
[rc\cert\utils\AltNameParserImpl.cpp(349)] [csf.cert.utils] [cert::AltNameParserImpl::verify] - Looking for match with 162.20.10.30
[rc\cert\utils\AltNameParserImpl.cpp(400)] [csf.cert.utils] [cert::AltNameParserImpl::verify] - No Match Found
I tried to change the IP address to FQDN under System---> Server, but after that the connection is lost between CUCM and IM&P.
Attached is the log file and snapshot of IM&P.
- See more at: https://supportforums.cisco.com/discussion/12490406/jabber-windows-registration-issue#sthash.E2wXb4iJ.dpufNishant,
Sorry for the late reply. You may well have resolved this by now, if you have can I suggest that you update the post with the resolution so others may benefit.
Looking at the logs, I can see that Jabber is trying to login to the IMP server below, but its returning server unreachable error.
Signing into Presence Server. Server: 162.20.10.30, login mode: ON_PREM, result: 0
[IMPStackCap::Login::OnLoginError] - ****************************************************************
[IMPStackCap::Login::OnLoginError] - OnLoginError: (data=0) LERR_JABBER_UNREACHABLE <16>:
[IMPStackCap::Login::OnLoginError] - ****************************************************************
We will need to look at the IMP logs to know what is going on. Let me know if you still need help with this. -
Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?
You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck. -
CS5 install issue? only appears to be a frame instead of filling the scree on Mac osx
CS5 install issue? only appears to be a frame instead of filling the screen on Mac osx
When I click on the middle it takes me back to the desktopHi,
I would recommend posting this query in the Adobe Photoshop forum.
You will get a specific response relevant to this question.
Thanks -
Ok all this Adobe registration stuff really confuses me. Here is my story.......I had Windows Vista when I loaded the full version Photoshop CS3...and registered it. I then rebuilt my computer installed Win 7 and bought the upgrade version CS4 and installed and registered it. When installing it just asked for the serial number for my full version CS3. Now I am installing a SSD drive and reinstalling Win 7.......I have the upgrade version of CS5. Should I unregister CS4 before I do the upgrade systems drive ? Do I leave CS4 registered ??? What serial number do I put in so Adobe knows I am eligible for the upgrade to CS5 ? What if I want to install CS4 sometime. This registration stuff really sucks and is confusing. I pay for my software and have to be confused.........I know plenty of people that just use bootleg copies.....so it doesn`t seem to stop anyone....but confuses paying customers........anyway didn`t mean to rant. If anyone can explain this registration stuff I would really thank them..........Peter
Activation and registration are two different things.
Activation is a system by which Adobe tries to keep people from stealing copies of their software. The software on your system communicates with Adobe's license servers to obtain permission to run. When that permission is received, the software makes note of it and is considered "activated".
Deactivate all the versions of your software before you retire an old system/disk, or you may have problems activating them when you reinstall.
Put the serial numbers in the places where the software asks for them when you install on a new system.
You do NOT have to deactivate older versions of Photoshop to install/activate/run newer versions. All the versions of Photoshop can happily reside on your system at the same time, and they keep out of eachothers' hair, though you can only run one at a time.
The Adobe EULA (license agreement) allows you to activate the software on two different computers, so you can have a copy on your desktop and laptop, for example.
If you have problems, call Adobe support. They're actually quite helpful when it comes to activation issues.
Get used to this - it's the way of the future. Thank all your friends who steal software for that.
-Noel -
Hi All,
We have done the sso registration successfully , but sso login functionality is not working as expected.
Please provide some inputs to fix this issue.
Environment
We are on 11gR2 database for both OID and EBS 11.5.10.2.
OID version 11g on web logic server.
SSO server version is 10.1.4.3
In the front end it is showing the below error while login using the SSO URL.
"The Single Sign-On server registration is invalid. Please contact the System Administrator. "
When we run the below query in the backend (EBS R11 DB) it suppose to get the records without any error or it is suppose to show just “no rows selected”, but I got the “ORA-29275” error in the backend
Query: select FROM FND_USER_PREFERENCES WHERE USER_NAME = '#INTERNAL'*
and I ran the FND Log Query, found these messages..."END with errors for getSSOVerion"
Query--> select * from fnd_log_messages where module like '%fnd.sso.FNDSSOLoginRedirect%' order by timestamp desc;
out put:
MODULE,LOG_LEVEL,MESSAGE_TEXT,SESSION_ID,USER_ID,TIMESTAMP,LOG_SEQUENCE,ENCODED,NODE,NODE_IP_ADDRESS,PROCESS_ID,JVM_ID,THREAD_ID,AUDSID,DB_INSTANCE,TRANSACTION_CONTEXT_ID
fnd.sso.FNDSSOLoginRedirect,6,END with errors for getSSOVerion,-1,-1,7/7/2011 5:39:36 PM,16151017,N,agsos186,155.108.22.210,5161,8230:16210,Thread[Thread-17669,10,main],46984138,1,3762242
I have run the below mentioned steps to register the sso with EBS R11.
Registration Steps
txkrun.pl -script=SetSSOReg -registersso=Yes
txkrun.pl -script=SetSSOReg -registeroid=Yes -provtmp=$FND_TOP/admin/template/ProvBiDiNoCreation.tmp (Here basically I don’t want provision/create the users by default in EBS or OID). Even I tried default option its not working ( by default it provision /create in both places EBS and OID)
LOG
Oxxx(APPS2)$txkrun.pl -script=SetSSOReg -registersso=Yes
Enter the host name where Oracle iAS Infrastructure database is installed ? xxxxxxxxx2.com
Enter the Oracle iAS Infrastructure database port number ? 1510
Enter the Oracle iAS Infrastructure database SID ? xxx2eee
Enter Oracle E-Business apps database user password ? xxxxxxx
Enter Oracle iAS Infrastructure database ORASSO schema password ? xxxxxx
Enter Oracle E-Business SYSTEM database user password ? xxxxxxx
Enter E-Business Suite existing SSOSDK schema password or choose a password to use with the new SSOSDK schema if the schema does not exist ? ssosdk
*** ALL THE FOLLOWING FILES ARE REQUIRED FOR RESOLVING RUNTIME ERRORS
*** Log File = /aifsd03/ifs/applmgr/xxxxcomn/rgf/xxxxxxxx_agsosxxx/sso/txkSetSSOReg_Fri_Jul_1_13_52_00_2011.log
Program : /aifsd03/ifs/applmgr/Oxxx/fnd/11.5.0/patch/115/bin/txkSetSSOReg.pl started @ Fri Jul 1 13:52:18 2011
*** Log File = /aifsd03/ifs/applmgr/xxxxxxxppl/rgf/xxxxxxxppl_agsos/sso/txkSetSSOReg_Fri_Jul_1_13_52_00_2011.log
######################## WARNING ########################################
This application works with SSOSDK version 9.0.2 or higher. If lower version
(3.0.9) of SSOSDK was installed in your system and you have a registered
partner application, this process will remove the 3.0.9 version of the SSOSDK
schema and install the 9.0.2 version.
######################## WARNING ########################################
Beginning input parameter validation for SSO registration.
Beginning loading SSO SDK into database if necessary.
Loading of SSO SDK into database completed successfully.
Input parameter validation for SSO registration completed.
BEGIN SSO REGISTRATION:
Beginning to register partner application.
Partner application has been registered successfully.
Single Sign-On partner application registered successfully.
End of /aifsd03/ifs/applmgr/xxxxxxxppl/fnd/11.5.0/patch/115/bin/txkSetSSOReg.pl : No Errors encountered
Oxxx(APPS2)$txkrun.pl -script=SetSSOReg -registeroid=Yes-provtmp=$FND_TOP/admin/template/ProvBiDiNoCreation.tmp
Enter the host name where Oracle iAS Infrastructure database is installed ? XXXXXXXXXXXXX2.com
Enter the LDAP Port on Oracle Internet Directory server ? 3010
Enter Oracle E-Business apps database user password ? XXXXX
Enter the Oracle Internet Directory Administrator (orcladmin) Bind password ? XXXXX
Enter the instance password that you would like to register this application instance with ? XXXXXX
*** ALL THE FOLLOWING FILES ARE REQUIRED FOR RESOLVING RUNTIME ERRORS
*** Log File = /aifsd03/ifs/applmgr/xxxxxxx0comn/rgf/xxxxxxxxx_agsosxxx/sso/txkSetSSOReg_Fri_Jul_1_13_58_14_2011.log
Program : /aifsd03/ifs/applmgr/xxxxxxxppl/fnd/11.5.0/patch/115/bin/txkSetSSOReg.pl started @ Fri Jul 1 13:59:50 2011
*** Log File = /aifsd03/ifs/applmgr/xxxxxxxppl/rgf/xxxxxxxppl_agsosxxx/sso/txkSetSSOReg_Fri_Jul_1_13_58_14_2011.log
Beginning input parameter validation for OID registration.
Input parameters validation for OID registration completed.
BEGIN OID REGISTRATION:
Beginning to register Application and Service containers if necessary.
Application and Service containers were found and thus not created.
Beginning to register application in Oracle Internet Directory.
Registration of application in Oracle Internet Directory completed successfully.
Beginning to register instance password in Oracle Internet Directory.
Registration of instance password in Oracle Internet Directory completed successfully.
Beginning to test application registration in Oracle Internet Directory.
Testing of application registration in Oracle Internet Directory completed successfully.
Beginning to register provisioning profile in Oracle Internet Directory.
Registration of provisioning profile in Oracle Internet Directory completed successfully.
Application is now registered successfully with provisioning in Oracle Internet Directory.
End of /aifsd03/ifs/applmgr/xxxxxxxppl/fnd/11.5.0/patch/115/bin/txkSetSSOReg.pl : No Errors encountered
Edited by: reddy1198 on Jul 8, 2011 2:36 PMPlease see if (The Single Sign-On server registration is invalid [ID 434752.1]) helps.
Thanks,
Hussein -
Problem with Photoshop CS5 registration
Hi
I have bought Photoshop CS5 from an previous owner with complete package and serial number. This copy is supposed to be deinstalled and deactivated from any other computer. I successfully installed and activated it but I don't see it in 'my products' page in my Adobe account. When I try to register product for my account I am getting 'already registred' error message.
What I need to do to have this Photoshop copy successfully registred for my name and account?
p.s.Buying Adobe software from a private party is not as easy as you describe. You have to jump through hoops for licence to be transfered from one party to the next. Here is link to form.http://helpx.adobe.com/x-productkb/policy-pricing/transfer-product-license.html
-
So I have to pose this question to you all since we are having a rather massive problem at my work here with this. The company I am working for is a large automotive restoration parts company and we have 7 full vehicle catalogs. Here is a bit of the explanation to what is we are doing.
Basically what is happening is that we use droplets to convert images to CMYK profile for our printer, create a web jpg and thumbnail and place it in the appropriate folder for being transferred to our database. The action we are using for this is as follows.
Save For DB and Web
Save- to a location on our server
Convert Mode- RGB for web
Image size- to reduce the size for web
Export- as jpg for web
Image size- reduces size for thumbnail image for web
Export- adds _thumbnail behind part number
Close
We have 5 different droplets that do basically the same thing in the end. Our work flow here is nothing special but here is now it work. All images are placed on a server(Apple server running Snow Leopard Server 10.8.6) for use in our catalog(linked in to Indesign) all as EPS. For the web jpgs the images are transferred into a large folder which once a week or so we run a bulk loader in our database software for use with our website. Images are transferred to the web server and all is deleted once it database has the image imported.
Now here is the problem. Randomly the droplets will not make one or more of the files when it runs. Most of the time it is perfect and has no issues. Sometimes it will create the EPS and not the jpgs, other times it will create only the thumbnail and others just the EPS and web but no thumbnail. It is just random and across 5 different droplets(only difference between them is where the EPS is saved to, the jpgs are saved to the same place in all of them). We recently updated all the droplets to CS5 .app extension as before we though the issue was because we were running CS3 created droplets but the issue has not changed. I am running them on both an iMac and Mac Pro, both running Snow Leopard 10.6.8 and they both have this issue. I am running the latest version of CS5 with all updates(have CS6 on order and will be trying that shortly). No once else has this issue like I do but I am running the most images on the droplets to place in the database so I think that is why I am seeing the most errors. One of my former coworkers was having this issue for years before I worked here and he was having them until his last day here. I am at a loss but I have a feeling that it has to do with the Apple Server that the department is using. I am not an apple fanboi at all and dislike using apple products but it is what I have to do in order to get work done so I continue to do it. So unless the computer knows I dislike it and is doing this as a form of revenge it has to be something. I personally think it is the server but I wanted to though out there to see what others think it could be.
I decided to make new droplets from scratch and have them saved onto a difference server as well as the original to see if it is a server. The second server that I am saving to has been perfect, while the normal server that is supposed to be is having issues. The server is the same controller, but has different RAID banks. The second server is limited access to only me and the other photographer I work with and is just a backup server.
Anyone have any ideas on what is going on or has encountered this issue before?
NickYes, open a raw file with Photoshop's Camera Raw, then move the sliders around - e.g., Shadows, Highights, Blacks, Whites, to bring the extreme parts of the exposure in.
It's surprising what results can be gotten from a single raw file:
Several examples:
JPEG From Camera:
Processed Raw File:
JPEG From Camera:
Processed Raw File:
-Noel -
Hi,
I've been using HDR with Photoshop CS5 for quite some time, and I'm now switching to CS6, but am having some troubles that I've never had before.
Here's a rundown of what's happening. First, I go to file -> automate -> merge to HDR
I then make the changes to gamma, exposure, etc. I leave the 16-bit and local adaptation alone; I've never changed any of that before. Someone mentioned how that could be an issue, but I never adjust any of that. After making the desired edits of colors, exposure, etc., I hit process. I'll show here what I get in the "preview" window where all of the work is being done, and then what the end result is.
Preview window:
What it comes up with after:
Any thoughts or ideas would be greatly appreciated!Yes, open a raw file with Photoshop's Camera Raw, then move the sliders around - e.g., Shadows, Highights, Blacks, Whites, to bring the extreme parts of the exposure in.
It's surprising what results can be gotten from a single raw file:
Several examples:
JPEG From Camera:
Processed Raw File:
JPEG From Camera:
Processed Raw File:
-Noel -
Portal Self registration issue
Hi guys,
I had activated Portal self registration with companies feature. what i did is , i assigned one role (ess portal role in which all my ess screens are covered) to authenticated group and every_user_core_role to anonymous group and did necessary configuration in configtool . The problem i am facing is that my self registered users are able to see my portal role without any approval (via approve/ deny in user administration) which i want to show them after approval . PLs guide what might me the issue.
Regards,
Shwetang Saxena.Hello Soni!
Please review and follow the steps mentioned here:
Companies and Self-Registration with Approval (SAP Library - User Management of the Application Server Java)
https://cw.sdn.sap.com/cw/docs/DOC-110636
Hope this helps,
Edison -
CS5.5--Issues with audio from imported avi's & issues exporting
To Start, my laptop:
CPU: Intel® Core ™ i7-2330QM CPU @ 2.00 GHz
CPU Clock Frequency: 2.00 GHz
System Memory: 8 GBytes
Cache Memory: 1 MBytes/6 Mbytes
Manufacturer: Sony Corporation
Model name: VPCF226FM
BIOS VERSION: R1190V#
OS Version: Microsoft Windows 7 Home Premium
ME Version: 7.0.10.1203
System Type: 64-bit Operating System
I downloaded the 30-day free trial of Premiere Pro CS5.5 with all updates. To play with the program, for my own personal amusement, I wanted to edit together pieces from a bunch of avi videos that I know to play properly outside the program, tested on more than one computer.
At first, importing the files seemed to be no problem, making subclips as I went along.
However, as I continued to import files, there began to be a sound issue--sometimes the sound not being present till I was 1/3 of the way through the clip, sometimes the sound seemingly playing catch up with audio that should be earlier in the video appearing later, sometimes the sound wouldn't come up at all, and still other times I'd be, for example, on video 5 when pieces of audio from video 2 would start playing over the current video.
I initially thought it may just be a memory issue, working with many large video files.
But later, when I went to edit the subclips I made, I found that many of them no longer had sound, even if they did when I initially subclipped them.
Weirdly, in the timeline, there is no consistency, as clips will appear in the video track but only some show audio tracks too. But those with audio tracks don't always play audio and those that show NO audio tracks at all actually do play audio sometimes. Also, those that show audio tracks and don't play them sometimes will show waveforms, sometimes don't. A clip with no waveform may not play 95% of the time, but then occasionally will suddenly have the waveform and play a couple times before reverting back to no audio.
A suitable solution for this personal amusement project would just be to drop a new soundtrack over the thing but, before I even got that far, I tried exporting as avi's and mpeg4's but then get error messages such as:
Premiere Pro has encountered an error.
[..\..\Src\Win\WinFile.cpp-785]
Error compiling movie.
Unknown error.
In case it was a memory issue, I tried starting a new project, only importing 2 videos, but had the same audio and exporting issues.
I'm getting really frustrated as I spent a lot of time importing/subclipping and then even more time prepping before that.
For those who are bound to ask, while new to Premiere, I'm not a novice with editing. I've used Final Cut Pro at work for many years (without such issues).
Thanks for your help.You might start at http://www.xvid.com/
Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Convert SD (Standard Definition) files to DV-AVI Type II with 48KHz 16-bit Audio
As well as the links just above, use Google to find conversion software
I have NOT used the products below, I only forward due to other mentions... so YMMV and all the usual disclaimers... check the links and read to find out if one of the products listed below will rip or convert the files you have to something you need for editing
http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
http://www.womble.com/products/mvw.html
http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
http://www.nchsoftware.com/prism/index.html
http://www.videoredo.com/en/index.htm
http://www.daniusoft.com/media-converter-ultimate.html
http://www.deskshare.com/media-converter.aspx Digital Media Converter
http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
http://download.cnet.com/FreeStar-Free-Video-Converter/3000-2194_4-10854990.html
http://www.videohelp.com/tools/XviD4PSP -
Registration issues.... Solaris 10 - 06/06
Having issues registering my V440 running Solaris 10 06/06. I have posted the error below and them some system information below that. any help is appreciated.
sysax /: /usr/sbin/sconadm register -a -r /usr/lib/breg/data/RegistrationProfile.properties
sconadm is running
Authenticating user ...
Exception in thread "main" java.lang.reflect.UndeclaredThrowableException
at $Proxy1.getInstanceName(Unknown Source)
at com.sun.scn.client.SCNClientSession.login(SCNClientSession.java:371)
at com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter.loginAccount(ClientLoginCacaoAdapter.java:209)
at com.sun.cns.basicreg.BasicRegCLI.authenticateUser(BasicRegCLI.java:1079)
at com.sun.cns.basicreg.BasicRegCLI.run(BasicRegCLI.java:669)
at com.sun.cns.basicreg.BasicRegCLI.main(BasicRegCLI.java:562)
Caused by: javax.management.InstanceNotFoundException: com.sun.scn:name=SCNBaseServiceFactory,assetSubProfile=Factory,host=sysax.consolidated.com,assetProfile=Factory,scnType=ServiceFactory,Vendor=Sun Microsystems Inc
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1010)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getClassLoaderFor(DefaultMBeanServerInterceptor.java:1349)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getClassLoaderFor(JmxMBeanServer.java:1300)
at com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.getClassLoaderFor(DefaultMBeanServerInterceptor.java:285)
at com.sun.cacao.agent.DispatchInterceptor.getClassLoaderFor(DispatchInterceptor.java:474)
at com.sun.cacao.agent.auth.impl.AccessControlInterceptor.getClassLoaderFor(AccessControlInterceptor.java:427)
at com.sun.jdmk.JdmkMBeanServerImpl.getClassLoaderFor(JdmkMBeanServerImpl.java:1130)
at com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.getClassLoaderFor(InstrumDefaultForwarder.java:153)
at javax.management.remote.rmi.RMIConnectionImpl$4.run(RMIConnectionImpl.java:1306)
at java.security.AccessController.doPrivileged(Native Method)
at javax.management.remote.rmi.RMIConnectionImpl.getClassLoaderFor(RMIConnectionImpl.java:1303)
at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:766)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
at sun.rmi.transport.Transport$1.run(Transport.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
at java.lang.Thread.run(Thread.java:595)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:126)
at com.sun.jmx.remote.internal.PRef.invoke(Unknown Source)
at javax.management.remote.rmi.RMIConnectionImpl_Stub.invoke(Unknown Source)
at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:969)
at javax.management.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:201)
... 6 more
sysax /: cat /etc/release
Solaris 10 6/06 s10s_u2wos_09a SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 09 June 2006
sysax /: cat /var/sadm/system/admin/CLUSTER
CLUSTER=SUNWCall
sysax /: java -version
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Server VM (build 1.5.0_06-b05, mixed mode)
sysax /: smpatch get
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
sysax /: cat /usr/lib/breg/data/RegistrationProfile.properties
# CLI registration profile template version 1.0
# ******** WARNING ********
# This profile contains sensitive data: passwords and subscription
# keys. You should take care in how you handle it, ensuring that it
# is always adequately protected (mode 400 or 600, owned by root)
# and not stored on insecure file systems like those exported through
# standard NFS.
# Sun Online account information. A new account can be created by visiting
# http://updates.sun.com
userName=**************
password=***********
# Name (label) of this machine as you would like it to appear on the Sun Connection
# portal. If left blank hostname will be used
hostName=devdbs01
# Service Plan / contract number with Sun. For more information on this topic
# please visit http://www.sun.com/service/warrantiescontracts/ . NOTE - a
# subscription key is required to use the Sun Connection Portal.
subscriptionKey=***************
# Allow this host to be managed by the Sun Connection Portal. If set to true,
# a subscription key is required.
portalEnabled=true
# HTTPS proxy information needed to connect to Sun for registration and patch
# updates.
proxyHostName=
proxyPort=
proxyUserName=
proxyPassword=The error message I received was from the Sun Update Connection GUI. Once the patches I attempted to apply failed.
sysax /tmp: ./suc.sh.2
$USER:
$LOGNAME: root
Sat Feb 24 13:37:07 CST 2007
sysax
smpatch get:
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
smpatch analyze:
119252-15 SunOS 5.10: System Administration Applications Patch
119081-25 SunOS 5.10: CD-ROM Install Boot Image Patch
124630-03 SunOS 5.10: System Administration Applications, Network and Core Libraries Patch
124188-02 SunOS 5.10: Trusted Solaris Attributes Patch
119315-07 SunOS 5.10: Solaris Management Applications Patch
121308-08 SunOS 5.10: Solaris Management Console Patch
119313-10 SunOS 5.10: WBEM Patch
119534-10 SunOS 5.10: Flash Archive Patch
119254-34 SunOS 5.10: Install and Patch Utilities Patch
119963-08 SunOS 5.10: Shared library patch for C++
120753-03 SunOS 5.10: Microtasking libraries (libmtsk) patch
123494-03 X11 6.6.2: fontconfig patch
119812-02 X11 6.6.2: Freetype patch
125014-02 SunOS 5.10: IP filter patch
120780-03 SunOS 5.10: ixgb patch
119764-05 SunOS 5.10 : ipmitool patch
124258-01 SunOS 5.10: ufs and nfs driver patch
124252-01 SunOS 5.10: nfssrv patch
120812-15 OpenGL 1.5: OpenGL Patch for Solaris
123839-04 SunOS 5.10: Fault Manager Patch
124204-04 SunOS 5.10: zfs patch
122911-02 SunOS 5.10: Apache 1.3 Patch
120543-08 SunOS 5.10: Apache 2 Patch
117463-04 SunOS 5.10: passwdutil Patch
118890-03 SunOS 5.10: llib-lc patch
125024-01 SunOS 5.10: basic audit reporting tool patch
123908-01 SunOS 5.10: ar patch
120887-06 SunOS 5.10: cdrw patch
119580-05 SunOS 5.10: libcpc Patch
124244-01 SunOS 5.10: /usr/bin/rm patch
119685-10 SunOS 5.10: svc.startd patch
124997-01 SunOS 5.10: /usr/bin/tip patch
121081-06 SunOS 5.10: Connected Customer Agents 1.1.0
120845-04 SunOS 5.10: auditd patch
124235-01 SunOS 5.10: libpam.so.1 patch
120050-05 SunOS 5.10: usermod patch
122525-03 SunOS 5.10: Sun Fire V445 patch
124614-01 SunOS 5.10: sconadm proxy: UnknownHostException
120986-10 SunOS 5.10: mkfs and newfs patch
125040-01 SunOS 5.10: /usr/lib/inet/in.mpathd patch
122517-03 SunOS 5.10: Sun Fire V215/V245 platmod patch
125035-01 SunOS 5.10: libinetsvc.so.1 patch
123334-04 SunOS 5.10: e1000g_transition patch
122660-07 SunOS 5.10: zones patch
119998-02 SunOS 5.10: arp, ip, ipsecah drivers patch
125026-01 SunOS 5.10: message queue patch
118371-08 SunOS 5.10: elfsign Patch
123328-01 SunOS 5.10: expr patch
123520-01 SunOS 5.10: basename & dirname patch
123915-01 SunOS 5.10: libcfgadm.so.1 patch
125018-02 SunOS 5.10: scsi_vhci driver patch
123912-02 SunOS 5.10: ppriv patch
118367-04 SunOS 5.10: csh Patch
125016-01 SunOS 5.10: audit and init patch
119824-02 SunOS 5.10: prstat patch
123910-01 SunOS 5.10: platform_sun4v.xml patch
122255-04 SunOS 5.10: etc/flash/precreation/caplib patch
123319-01 SunOS 5.10: sysacct patch
118557-07 SunOS 5.10: platform/sun4u/kernel/drv/sparcv9/su patch
123271-01 SunOS 5.10: iwscn patch
124922-02 SunOS 5.10: ld.so.1 patch
123301-01 SunOS 5.10: i2c_svc patch
124325-01 SunOS 5.10: rcm modules patch
121561-04 SunOS 5.10: keymap patch
124918-02 SunOS 5.10: devfsadm, devlinks, drvconfig patch
122032-04 SunOS 5.10: Update timezones patch
124916-03 SunOS 5.10: sd, ssd drivers patch
121002-03 SunOS 5.10: pax patch
123252-01 SunOS 5.10: platform/SUNW,Netra-T2000 patch
122412-01 SunOS 5.10: ipseckey patch
122408-01 SunOS 5.10: libmtmalloc patch
120473-02 SunOS 5.10: nss_compat patch
124254-02 SunOS 5.10: sockfs patch
124250-03 SunOS 5.10: rpcmod patch
122752-04 SunOS 5.10: FMA snmp patch
124999-01 SunOS 5.10: mc-us3 driver patch
125319-01 SunOS 5.10: rmc_comm patch
125028-02 SunOS 5.10: pcipsy patch
118879-02 SunOS 5.10: dhcp daemon patch
118815-05 SunOS 5.10: awk nawk patch
121286-04 SunOS 5.10: libfru.so.1 and libfrureg.so.1 patch
122363-02 SunOS 5.10: fru_container.conf and libfruaccess.so.1 patch
119974-07 SunOS 5.10: fp plug-in for cfgadm
120222-15 SunOS 5.10: Emulex-Sun LightPulse Fibre Channel Adapter driver
119130-33 SunOS 5.10: Sun Fibre Channel Device Drivers
120182-05 SunOS 5.10: Sun Fibre Channel Host Bus Adapter Library
120346-06 SunOS 5.10: Common Fibre Channel HBA API Library
124943-01 SunOS 5.10: SunFreeware gzip man pages patch
122675-01 SunOS 5.10 : SunFreeware samba man pages patch
123809-01 SunOS 5.10: rpcsec_gss patch
121239-02 SunOS 5.10: libgss patch
120719-02 SunOS 5.10 : SunFreeware gzip patch
118925-05 SunOS 5.10: unistd header file patch
124208-01 SunOS 5.10: Trusted Extensions header files patch
124280-01 SunOS 5.10: libkdb.so.1 patch
120469-05 SunOS 5.10: kerberos patch
121006-02 SunOS 5.10: libkadm5 and kadmind patch
124991-01 SunOS 5.10: llc2 driver patch
124286-01 SunOS 5.10: chkey core dump
123186-02 SunOS 5.10: NIS yp utilities patch
124987-01 SunOS 5.10: ldap_cachemgr patch
119470-10 SunOS 5.10: Sun Enterprise Network Array firmware and utilities
122404-01 SunOS 5.10: xntpd patch
124990-01 SunOS 5.10: Sun-Blade-100 libprtdiag_psr.so.1 patch
121944-02 SunOS 5.10: libpsvcpolicy and libpsvcpolicy_psr patch
122537-02 SunOS 5.10: libpiclenvmon.so.1 patch
123590-02 SunOS 5.10: PostgresSQL patch
120629-05 SunOS 5.10: libpool patch
124993-01 SunOS 5.10: in.ndpd patch
125011-01 SunOS 5.10: sendmail patch
125022-01 SunOS 5.10: usr/sbin/sar patch
122376-01 SunOS 5.10: prex patch
120068-03 SunOS 5.10: in.telnetd patch
124995-01 SunOS 5.10: ehci driver patch
121010-05 SunOS 5.10: rpc.metad patch
124256-01 SunOS 5.10: md_mirror patch
125075-01 SunOS 5.10: svc-volfs patch
125073-01 SunOS 5.10: vold patch
119555-04 SunOS 5.10: Software to support QLogic Ultra3 SCSI host bus adapters
119090-22 SunOS 5.10: Sun iSCSI Device Driver and Utilities
120272-06 SunOS 5.10: SMA patch
124463-02 SunOS sparc : cacao 2.0 patch 02
119213-11 NSS_NSPR_JSS 3.11.4: NSPR 4.6.4 / NSS 3.11.4 / JSS 4.2.4
118666-11 J2SE 5.0: update 11 patch (5.0u11)
118667-11 J2SE 5.0: update 11 patch (5.0u11), 64bit
122119-05 SunOS 5.10: Patch for Arabic Fonts
119703-08 SunOS 5.10: Patch for localeadm issues
123003-02 SunOS 5.10: dependency issue with SUNWopenssl-include
123630-01 SunOS 5.10: HTTP proxy settings patch
123005-05 SunOS 5.10: Basic Registration Update
123011-01 SunOS 5.10: BR desktop icon patch
119648-03 SunOS 5.10: vlan driver patch
118777-08 SunOS 5.10: Sun GigaSwift Ethernet 1.0 driver patch
121118-11 SunOS 5.10: Sun Update Connection System Client 1.0.9
118712-13 SunOS 5.10: Sun XVR-100 Graphics Accelerator Patch
120410-17 SunOS 5.10: Internet/Intranet Input Method Framework patch
121734-05 SunOS 5.10: patch to support addition of new UTF-8 locales
119810-03 SunOS 5.10: International Components for Unicode Patch
120099-07 APOC 1.2: Sun Java(tm) Desktop System Configuration Shared Libraries
119546-07 APOC 1.2: APOC Configuration Agent Patch
124393-02 CDE 1.6: Dtlogin smf patch
123611-02 X11 6.6.2: Trusted Extensions patch
119280-10 CDE 1.6: Runtime library patch for Solaris 10
119278-12 CDE 1.6: dtlogin patch
124405-01 CDE1.6: sdtfprop patch
124403-01 CDE1.6: dtstyle patch
124401-01 CDE1.6: dtpad patch
124399-01 CDE1.6: dtfile patch
125279-01 CDE1.6: dtsession patch
121977-02 CDE 1.6: dtlogin resources patch
124397-02 CDE1.6: libDtWidget patch
124395-01 CDE1.6: dtaction patch
119117-29 Evolution 1.4.6 patch
123938-01 GNOME 2.6.0: GNU Transport Layer Security Library Patch
119418-03 GNOME 2.6.0: Gnome On-screen Keyboard Patch
119414-13 GNOME 2.6.0: Gnome Accessibility Libraries Patch
119598-08 GNOME 2.6.0: Gnome Screen Reader and Magnifier Patch
120454-02 GNOME 2.6.0: Gnome Apoc GConf Adapter Patch
120460-10 GNOME 2.6.0: Gnome libs Patch
120284-04 GNOME 2.6.0: GNOME CORBA ORB and component framework
122212-17 GNOME 2.6.0: GNOME Desktop Patch
119410-05 GNOME 2.6.0: Gnome Applets Patch
119540-05 GNOME 2.6.0: Gnome Dtlogin configuration Patch
119548-07 GNOME 2.6.0: Gnome Multi-protocol instant messaging client Patch
123162-02 GNOME 2.6.0: Gnome Java Run Time Patch
120739-03 GNOME 2.6.0: GNOME PDF Viewer based on Xpdf
119368-05 GNOME 2.6.0: Printing Technology Patch
121606-02 GNOME 2.6.0: Python patch
120288-03 GNOME 2.6.0: Gnome terminal Patch
119906-08 Gnome 2.6.0: Virtual File System Framework patch
119538-10 GNOME 2.6.0: Window Manager Patch
119115-23 Mozilla 1.7 patch
122958-02 GNOME 2.6.0: RealPlayer media application
119903-02 OpenWindows 3.7.3: Xview Patch
119059-21 X11 6.6.2: Xsun patch
125045-01 X11 6.6.2: Xft patch
124457-01 X11 6.6.2: xdm patch
showrev -p
119788-07
120335-04
121081-05
121118-06
121118-08
121118-10
121453-02
122231-01
java -version:
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Server VM (build 1.5.0_06-b05, mixed mode)
/etc/release:
Solaris 10 6/06 s10s_u2wos_09a SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 09 June 2006
/var/sadm/system/admin/CLUSTER:
CLUSTER=SUNWCall
/usr/lib/cc-ccr/bin/ccr -g cns.assetid:
1917645754
patchsvr setup -l
Patch source URL: https://getupdates1.sun.com/
Cache location: /var/sadm/spool/patchsvr
sysax /tmp: ps -ef | grep cc
root 2006 2003 0 Feb 22 ? 0:17 /usr/lib/cc-cfw/platform/transport/bin/cctransport
root 2022 2017 0 Feb 22 ? 0:01 /usr/lib/cc-cfw/platform/fwagent/bin/ccfwagent
root 2003 1 0 Feb 22 ? 0:00 /bin/sh /usr/lib/cc-cfw/framework/lib/watchdog /usr/lib/cc-cfw/platform/transpo
root 2013 2010 0 Feb 22 ? 0:01 /usr/lib/cc-cfw/platform/ccragent/bin/ccccragent
root 2010 1 0 Feb 22 ? 0:00 /bin/sh /usr/lib/cc-cfw/framework/lib/watchdog /usr/lib/cc-cfw/platform/ccragen
root 2017 1 0 Feb 22 ? 0:00 /bin/sh /usr/lib/cc-cfw/framework/lib/watchdog /usr/lib/cc-cfw/platform/fwagent
noaccess 1898 1 0 Feb 22 ? 1:02 /usr/jdk/instances/jdk1.5.0/bin/java -server -XX:+BackgroundCompilation -Djava.
root 8884 5284 0 13:39:27 console 0:00 grep cc
sysax /tmp: -
Illustrator cs5 selecting issue in mountain lion
I'm having a strange issue using illustrator cs5 after updating to mountain lion. I have a line of text that I rotated and copied several times so it resembles an asterisc shape * (3 lines of type fanned out over a central point). When I select 1 line of type, 2 or more lines are selecting. It happens even if I try to click in an empty area of the file (white space). The kicker is that it even happens in outline view (even in the white space). Any help is appreciated.
ThanksNot sure what is happening, but a workaround might be to put each line of type on its own layer, then lock and/or hide layers you don't want to select.
DS -
Retail Execution Application Device Registration Issues
Hello Community,
I am having issues registering the Retail Execution application with a user in CRM.
I am testing with an iOS device where I downloaded the application from the app store and an Android device where I got the APK from the SAP marketplace.
The guide I am following is the Administrator's Guide SAP Retail Execution 3.2.0.
There are a few issues i've come across which I think might be contributing to my devices not enrolling.
I've completed the setup of the environment till the point in the documentation for Data Change Notification where I need to create an RFC connection to the SMP server.
I entered the IP address for the SUP server with the port as 80. Is port 80 correct?
The username ive setup as supAdmin@Admin with the password.
When I test the connection I get a : Status HTTP Response 404 error.
Another issue I have is that in the documentation under the section enrolling a device using the Relay Server, all the fields are referring to SMP username, SMP Farm ID, SMP Activation code and so on. The connection details I have used in other apps are as follows:
Server : <ip of relay server>
Farm : Relay server Farm ID
Username : jcommerford@crm (CRM login ID @ security configuration - crm is my HTTPAuthentication security configuration I created in SUP)
password :
Port : 80 (relay server port)
URL suffix : leave blank
Domain : The new domain I created in SUP and where the Rex MBO is deployed.
So it isnt making sense as to what details need to go into here.
Lastly...
What is the absolute minimum setup of the CRM system and SUP to register a user through the relay server?
I would like to comment that I havnt performed the initial download of Master Data using DCN but didnt think this was needed to enrol a device. Other than that the guide was followed and configuration done according to it.
Let me know if anymore information is needed as I am very stressed to get this issue sorted out.
Thank you
JaredHello Jared
Has the registration worked without the Relay server setup? I would suggest you try that first.
I am assuming you already set the SM59 destinations for CRM to SMP and trusted RFC to corresponding ECC (but this is not necessarily the issue, because the registration is failing).
Please confirm that the RFC Destination is set as follows (use the supAdmin user on the Logon & Security page)
Check the security provider on SMP (your's may be different but I am using the following for POC and it works)
Could you please confirm if the REX package was deployed correctly on the SMP server by selecting the connection pools for both CRM and ECC for corresponding MBO's
Please post a log of the SMP server once you switch to direct registration to SMP (without relay server)
Thanks
Raza. -
Zenworks 7 Linux Management Device Registration Issue
All,
Below is a detailed description of a resistration issue using Zenworks
Linux Management 7.
Hardware Configuration:
1- DSL Modem (Westell Model 2200)
1- DI 614+ 2.4 GHz Broadband Wireless Router (includes 4-5 ethernet
ports) with a IP address of 192.168.0.1
1- PC Server running Redhat SUSE Linux Enterprise Server 9 (has a static
IP address of 192.168.0.103). This machine is running the Zenworks 7
Linux Management Software and is able to sucessfully launch the Zenworks
7 Control Panel.
1- Redhat Linux Enterprise Server 3 on a completely different network
with a static IP address (207.44.142.56). This machine is running the
Zenworks Linux Management Agent install using the ./zlm-install -a
command.
Network Configuration:
The broadband DSL modem is connected directly to the WAN ethernet port on
the wireless router
The primary PC server running Redhat SUSE Linux Enterprise Server 9 has a
direct connection to one of the ethernet ports on the wireless broadboard
router with a private static IP address of 192.168.0.103 and has a public
IP of 70.22.107.168.
The DSL modem is has a direct connection to the telephone line.
The Redhat Linux Enterprise Server 3 is on a completely different network
with a IP of 207.44.142.56.
No firewalls are configured on the primary server and the wireless router
Port Forwarders are configured on the broadband wireless router as
follows:
zlm1
192.168.0.103
TCP 80/80
always
zlm2
192.168.0.103
TCP 443/443
always
zlm3
192.168.0.103
TCP 524/524
always
zlm4
192.168.0.103
TCP 1299/1299
always
zlm5
192.168.0.103
TCP 2544/2544
always
zlm6
192.168.0.103
TCP 5506/5506
always
zlm7
192.168.0.103
TCP 10389/10389
always
zlm8
192.168.0.103
TCP 10636/10636
always
Goal:
To successfully register the Redhat Linux Enterprise 3 server (i.e. the
managed device with IP 207.44.142.56) with the primary server
(192.168.0.103 SUSE Redhat Enterprise Server 9 machine) so it can be
viewed and managed from the Zenworks 7 Control panel.
Nature of Problem:
When attempting to register the managed device (207.44.142.56) with the
primary server (192.168.0.103) which resides inside of my Wireless Local
Area Network (WLAN) via the following command, it appears to fail. I'm
unable to view or configure this managed device inside of the Zenworks 7
Linux Management Control Panel. The following are 2 manual approaches
that I take to register the managed device and the results for each.
Register using private IP approach:
/opt/novell/zenworks/bin/rug sa https://192.168.0.103
Results: ERROR: Could not add 'https://192.168.0.103': Download failed:
(https://192.168.0.103/zenworks-registration/service.xml) Error:
ConnectFailure
Register using public IP approach:
/opt/novell/zenworks/bin/rug sa https://70.22.107.168
Results: ERROR: Could not add 'https://70.22.107.168': Download failed:
(https://70.22.107.168/zenworks-registration/service.xml) Error:
ConnectFailure
Regards,
Darrick Addison
Sr. Software Engineer/Consultant
ASC Technologies, LLC
Ph: 443.257.9116
Fax: 410.360.5570
E-mail: [email protected]
Web: www.asctllc.comOn Tue, 08 Nov 2005 02:37:16 GMT, [email protected] wrote:
> Below is a detailed description of a resistration issue using Zenworks
> Linux Management 7.
duplicate question - can I gently mention a point? Whilst we naturally
understand that you may need information/help in a hurry, asking the
same question in multiple forums dilutes the answers you get, and makes
more work for those of us who have to read them; it would help if you
could avoid this in future.
Many thanks
(c) Shaun Pond, stolen without permission ;-)
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net
Maybe you are looking for
-
Command line parameters for automator?
I'm trying to setup a cron job to so that every morning at 8 am "New Mail.workflow" will open and run. I'm able to get it to open but I was wondering if there were command line parameters for Automator that could open AND run a workflow file? Ideally
-
So my issue is that whenever I am on Skype, the person on the other end can hear all of my laptop's sounds (e.g. music, videos, etc) and doesn't pick up my voice or external sounds at all. Does anyone know how to fix this issue? Thank you!
-
Whats the latest map version?
there is still no easy way fo finding out if I need to update my map data. My N95 8GB lists version 0.1.23.112 is this up to date?
-
I got this error while installing an Oracle upgrade patch (Oracle 9.2.0.8) on the file oemevent. It happened only on one machine. I I eventually allowed the install to finish after telling it to ignore the corrupted file, and copied a good oemevent f
-
I have Flash CS3 purchased and installed and I'm using a trial of After Effects CS3 to try to make an FLV with cue points. The problem is that when I add my project to the render queue, I find that the option to render to Adobe Flash FLV format is no