CS5 save as CS4 makes Large File and sees virtual memory issue

Two CS5 flash files. FileSource 27Mb  File Destination 21.8Mb
They open in 80 seconds for each.
FileSource has 15 MovieClips, 5 show areas of the map in a variety of colours, shape intensive one could say ! These are made into one movie clip and copy pasted to the FileDestination. In CS5 it then crashes.
I turned these instead into CS4 files, they open in 10 seconds ! WOW !!!  I needed to adjust the text which had become two lines from one though.
I try again for the CopyPaste of the movie Clip from library to library, this time I get a message Flash is out of  memory. To increase virtual memory, quit Flash and allocate more virtual memory in the Systems Properties dialog box.
In there I see
Initial   2046Mb
Max size 4092Mb
Recommended 4605Mb
I alter this to:
Initial  3800Mb
Max    4600Mb
Reboot PC (Win XP SP2 wih 4Gb ram, purpose built video editing suite) and try again, but again get the memory message. Such a powerful PC should handle Flash. PC at work also crashing with CS5.
I thought I was winning with the quick handling of the files in CS4 but File size is now alarmingly FileSource  76.1Mb  and FileDestination 58.4Mb   WHY ? and why does it open them so quick but fall over on the copy paste ?
CS4 opens these in 8 not 80 secs, but that save as CS4 has bloated their file size, quick to open but causing virtual memory failure. 
I am defeated
Does CS5 have some way of keeping size down ? I can’t use CS5 as it crashes when pasting the MovieClip from the source file to destination.
Can I get Flash to simplify the layers perhaps ? There are many shapes of the same colour which perhaps could be fused into one, lessening the number of vector edges. How is that done ? I am making an swf file for a clients powerpoint slide show.
Envirographics

Possible good news. I've been away and hadn't opened DW since also having had a problem with Finder and external drives on my return. When I opened it today, and needed to do a 'Save As' , it did it with no problem of rendering. Though there have been no DW updates, there was updates to PS and ID. So I'll tentatively say the problem has gone away - hopefully for good.
Just editing this post. I happened to turn  Live View on etc.. for the first time in a couple of weeks due to the  above. I realsied this morning I hadn't turned it on. Now it is just as  before when I try to 'Save As' - blank, an then have to close and reopen  for it to render (even though the Live View/Live Code is now stiched  off).
No I don't know how to turn this thread back into an 'Unanswered' question.
Message was edited by: tgiadd

Similar Messages

  • I am trying to make a signature in MS Word (2007) which includes a jpg image, but when I save it as a HTML file and attach it the text appers OK but the image doesn't. I have tried various formats but still no luck. Can anyone help?

    I am trying to make a signature in MS Word (2007) which includes a jpg image, but when I save it as a HTML file and attach it the text appers OK but the image doesn't. I have tried various formats but still no luck. Can anyone help? edit

    C'mon! Anyone???? I'm desperate!

  • Does FW CS5 Mac crap out w large file sizes?

    Does FW CS5 Mac crap out with large file sizes like CS4 did? It seems like files over a 4-5MB tend to be flaky... Is there an optimum file size? I'm running a Mac Tower 2.93 GHz Quad Core, w 8 GB RAM

    Why not download the trial version and find out?

  • In Illustrator, I have a saved artwork, then I'm saving a copy as PDF, as usual.  After I keep the AI file open, making some modifications which I don't want to save, so I close the file and click "Don't Save".  Even though I clicked that, the file's modi

    In Illustrator, I have a saved artwork, then I'm saving a copy as PDF, as usual.
    After I keep the AI file open, making some modifications which I don't want to save, so I close the file and click "Don't Save".
    Even though I clicked that, the file's modification time is changing.
    (The modifications I made are not there, so it's not really saving but why the date is changing then?)
    Please find the cause of it! Thank you!

    All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

  • How do i delete large files and pics of my mac book pro

    how do i delete large files and pics of my mac book pro

    Make sure that you do not delete any system file, or part of an application.
    Use Omnidisksweeper as a search tool   http://www.omnigroup.com/more

  • How can I get to read a large file and not break it up into bits

    Hi,
    How do I read a large file and not get the file cut into bits so each has its own beginning and ending.
    like
    1.aaa
    2.aaa
    3.aaa
    4....
    10.bbb
    11.bbb
    12.bbb
    13.bbb
    if the file was read on the line 11 and I wanted to read at 3 and then read again at 10.
    how do I specify the byte in the file of the large file since the read function has a read(byteb[],index,bytes to read);
    And it will only index in the array of bytes itself.
    Thanks
    San Htat

    tjacobs01 wrote:
    Peter__Lawrey wrote:
    Try RandomAccessFile. Not only do I hate RandomAccessFiles because of their inefficiency and limited use in today's computing world, The one dominated by small devices with SSD? Or the one dominated by large database servers and b-trees?
    I would also like to hate on the name 'RandomAccessFile' almost always, there's nothing 'random' about the access. I tend to think of the tens of thousands of databases users were found to have created in local drives in one previous employer's audit. Where's the company's mission-critical software? It's in some random Access file.
    Couldn't someone have come up with a better name, like NonlinearAccessFile? I guess the same goes for RAM to...Non-linear would imply access times other than O(N), but typically not constant, whereas RAM is nominally O(1), except it is highly optimised for consecutive access, as are spinning disk files, except RAM is fast in either direction.
    [one of these things is not like the other|http://www.tbray.org/ongoing/When/200x/2008/11/20/2008-Disk-Performance#p-11] silicon disks are much better at random access than rust disks and [Machine architecture|http://video.google.com/videoplay?docid=-4714369049736584770] at about 1:40 - RAM is much worse at random access than sequential.

  • I have added photos to a portfolio website I'm building and a lot of them look VERY grainy when you click on them. They are nice clean large files and can print bat high res way over 16" x 20" so whats happened to them in iWeb?

    I have added photos to a portfolio website I'm building and a lot of them look VERY grainy when you click on them. They are nice clean large files and can print bat high res way over 16" x 20" so whats happened to them in iWeb?

    When you are dealing with websites, image file size is a trade off between quality and download speed. There's not a lot of point to having high quality images if they take too long to download in the browser.
    Nowadays we also have to consider the device that the end user is viewing the images on. An image that is optimized for viewing on a large screen is total overkill and unsuitable for those using mobile devices.
    Really we should be supplying different versions of media files for different devices using @media rules in the stylesheet but this is rather outside of the scope of iWeb. If you use the built in image optimizer and the iWeb Photo template with slideshow, the application will optimize the images according to the way in which you set this function in preferences and the slideshow size will be automatically reduced for those viewing it on smaller screens.
    If you want to give your viewers the opportunity to view large, high quality images, you can supply them as a download.

  • Part 2: Flat files and Business Contents: Any issues with this scenario?

    I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
    1.
    " ...you’d better analyze those cubes for data redundancy and presence of data you’ll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
    2.
    "If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
    3.
    I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
    If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
    4.
    "Consider carefully the ODS’ key fields selection. Their combination should not allow data aggregation that you don’t need."
    I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
    Thanks in advance

    Hallo
    I try to give some exaplanation based on the previous answer.
    1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
    2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
    Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
    3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
    4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
    for example: customer - product - Distr Chan - Sell Price
    if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
    I hope eveyrhting is clear
    Regards
    Mike

  • I have recently changed to an iMac from a Windows PC. How do I delete files and format the memory card in my helmet cam?

    I have recently changed to an iMac from a Windows PC. How do I delete files and reformat the memory card in my helmetcam?

    If you return the memory card to the helmetcam, it may choose to reformat it before use; back to some FAT-16 or FAT-32 format many of these third-party cards and cameras use. Unless you were going to use it for Mac OS X and format it with HFS+ or in a partition map for Mac data, etc.
    If not, the easiest way to reformat the card may have been in the camera itself. I've formatted several kinds of camera cards, drives, USB flash drive, and others. The means varies with the intended purpose. Sometimes the default is the best; since it is platform neutral if the device is seen by both players.
    Good luck & happy computing!

  • Rendering and Low System Memory issues in PE9.

    Hello again.
    N.B: I am an ex-PE3 user.
    I am having a few issues with PE9.
    1. My main issue is that I am regularly getting the 'low system memory; please proceed with caution' message. I have googled it and read people's suggestions, but am not sure where to go from here. I have tried saving my file under another name, but am already up to '....E' (fifth) version of the file I've been working on this afternoon. The total time of the project is only approx 45 min's, although I will say that this 'low system memory' issue seems to be worst today, as I'm adding more still photos.
    2. One of the suggestions made by Steve G on one of the forums was to make sure projects are regularly rendered. When I hit 'Enter' to render, the little render window pops up for a split second and then disappears. And I would assume from the red line above my timeline that my file is not rendered.
    3. When I switch to 'Sceneline' view, my horizontal scroll-bar across the bottom will only drag SO far (to a certain point in my project; but definitely not to the end of my project. It is really frustrating. I sometimes can fix it by flicking between Sceneline and Timeline, but I have to do this multiple times... and it seems a ridiculous way to do it.
    It would be fantastic if someone could help me with these issues, please!
    System details:
    AMD processor 3.2 Ghz
    4 gig RAM (3.12 gig usable)
    Windows 7 Ultimate

    Hi everyone:
    Thankyou for all your suggestions.
    Sorry, Bill, but both those links give me an error message. I was all set to read them, but they won’t work, unfortunately.
    What is meant by ‘page file managed’, sorry? And do you mean ‘hard disk drives’ by HDD, or does it stand for something else in this context? I’m not sure what you mean by how do I have them allocated. Again, apologies for my ignorance. I do have only one HDD, but it is partitioned.
    The image sizes all seem to have a depth of 24, but vary in dimensions – I can see that some are quite large (around 3 mg in size, with dimensions of 4288x2848, for example). Is the actual mg-size relevant, or only the physical length and width?
    I have tried to look at the frame size of my project, but it seems to be greyed out. In pale digits, there is 720x576 written.
    Just before I sent this, I thought of one other thing to try first.
    I tried starting a ‘New Project’. I then inserted just 6 still photos, for experimentation purposes. I then hit ‘Enter’ and the Rendering window came up and appears to have rendered correctly. So I then tried looking at one of my other projects (that hadn’t previously been rendered) and tried to render it. In this case, as in for the project I am currently working hard on, the Rendering window flashes up for about ¼ of a second and then disappears.
    What is going on???
    From: Bill Hunt [email protected]
    Sent: Friday, 11 March 2011 2:00 AM
    To: rachel jewiss
    Subject: Rendering and Low System Memory issues in PE9.
    although I will say that this 'low system memory' issue seems to be worst today, as I'm adding more still photos.
    What are the pixel x pixel dimensions of those still images?
    What is the Frame Size of your Project?
    How is your Page File Managed, and what is the size? This http://forums.adobe.com/thread/632449?tstart=30 will give you some background and tips.
    Also, tell us about your HDD's, and how you have them allocated.
    For more discussion on Rendering, please see this http://forums.adobe.com/thread/794719?tstart=0.
    Good luck,
    Hunt

  • Filevault and Secure Virtual Memory

    If I have filevault enabled and secure virtual memory am I reducing my system performance because it would be encrypting already encrypted data?
    What sorts of security breaches can occur by not enabling secure virtual memory?
    P.S would this protect against the hack where a thief can extract my RAM and read my system password stored inside?
    Thanks
    -IP20

    Hi, Bob,
    Yes, you are right but "not exactly."
    If the computer is a laptop and is stolen with an intact battery and has not been shut down, then data in RAM may be accessible. It may be difficult, however, to take a desktop Mac without removing power which would cause the RAM's content to be lost (except for PRAM.)
    As for cryogenically freezing the computer that would most likely require removing the computer to another location. Removing frozen chips would be difficult if one wished to avoid having them increase to a temperature where the data would be lost.
    In any event I don't think the above are even relevant concerns for the consumer user. What would the typical home user have on a computer that would merit such extreme measures. Handling something cold enough to freeze RAM sufficiently to recover its content requires special equipment. I don't think my neighbor really cares that much - and the hacker would need direct access to the hardware. I don't think I would let someone have access to my computer that showed up at my door with a large thermos of liquid nitrogen! Furthermore who would leave their computer turned on and accessible, then walk away from it if they were so security conscious that they needed to use FileVault and Secure VM?

  • I would like to make one file and add several related files of photos in the one event.  Keeping photos in seperate event files in one large event file.  Is this possible?

    I would like to make one event file and add several realted event files in this one event file without putting all photos together.  Can this be done?

    Files and events ahve nothing to do with each other
    If you are looking for "sub-events" that is not a feature of iPhoto
    you can use albums and folders - albums hold photos and folders hold albums or other folders
    If thsi does not answer your queation please ask it again - it is not clear
    LN

  • Photoshop cs4 makes huge files - but with Aperture Whats the biggest file ?

    When editing w/Photoshop cs4 by adding layers and masks etc, This makes HUGE files - but with using Aperture alone, what's the biggest file size when editing a RAW file?? (??? _Kb ??? __ mgB ????)
    I think I heard -12kb. True ?_________ From what little I understand. Aperture changes the pixels once you have finished the editing. Or to put it another away, Aperture replaces the old or original pixels with the edited final pixels you prefer. IE -lighter darker. and with that said. is this still a RAW IMAGE?

    Hello, and welcome to the Discussions.
    It would seem that none of what you report hearing is accurate. A RAW file downloaded into Aperture, remains as the Master for this image, and is never changed -- that is why Aperture is said to utilize non-destructive editing. When editing in Aperture, only a small file of edit detail is saved, and no actual new version needs to be created until you Export for some purpose.
    When you send an image file from Aperture to Photoshop to be edited, it typically will be a version created as a TIFF file, although there are 4 choices in the Preferences -- TIFF, TIFF 16-bit, PSD, and PSD 16-bit. When finished editing, the image is Saved in PS, that file is available to Aperture, and the version created for sending to PS will change to reflect those changes made in PS.
    Aperture cannot send an edited RAW file to PS in this fashion, but you can Export the RAW Master, to later be opened in Photoshop.
    You should watch all the available online tutorials about Aperture, and possibly buy a book as well.
    Aperture may have trouble with super-sized images, but I have not had trouble with those in the range of 100 MB or less. Larger ones than that would likely be from scans and not from editing an image shot with your camera in Photoshop.
    Ernie

  • Imovie won't let me save my movie as a file, and it says ''startup disk'' is full!

    I made a movie on Imovie and it won't let me download or convert, I don't know what else I can do, and also it says my disk is full, and my macbook is 64 and its impossible, i dont have that much. please help me. I want to save my movie and fix disk because is making my computer slower and doesn't let me save anything because is ''full''. I need to find a way to save the movie complete and as a file and make my computer faster and with it's original memory.
    HELP!.

    I have the same problem and then some. I movie won't share this particular project, but it also won't save any changes made to it or any other project. At least that's what it started doing, now when I go to even try to make any changes it wigs out and things get scrambled in the Project window and it plays video from another project.
    When I create a new project, the Share menu is available, but it won't save changes to that project either. And by that I mean I can put stuff in the project and do whatever, but as soon as I quit and relaunch the application, the project is empty. I did figure out that if I make changes in a new project and immediately share it to the media browser that it will save the changes, but then it messes up my other project even more somehow!
    Tried archive and install, deleting plists, reinstalling iMovie and iLife support stuff (twice), repairing permissions, and changing permissions in the project package. Any other ideas?

  • PS elements saves pic as a blank file and I cannot open it

    Hey guys, I'm hoping you can help me.
    I am using Photoshop Elements 8 and I'm not sure what happened (or what I did), but suddenly the files I save (save-as, i rename retouched files) started saving as blank thumbnails. I cannot open them, and the properties list the type of file as "File" (although I was saving them .jpeg).
    Also, the size of the blank thumbnails is about the same as the original picture (a little larger cause it's retouched; which is normal).
    The file still saves as a blank if I change the name and if I try changing the format (.bmp, .jpeg., etc)
    I'm using Windows Vista, if it matters.
    I'm attaching a screencap of what it looks like in the folder and the file properties that come up
    Let me know if I should provide any other information and I'd appreciate any and all help. This is the only PS I have access to right now and it's painful to have folders of pics and not be able to do anything with them.
    Thanks in advance =)

    It looks like like windows got confused because you have periods in the file names.
    If you take one of your saved files and add a .jpg at the end elements should open the file.
    It's probably a good idea not to use periods in file names except for the file extension.
    Using an underscore instead of periods is a better way to go.
    It also seems that in later versions of elements and photoshop one has to be careful about using periods in the file names or the program won't save the files right
    which was not the case in old versions of elements and photoshop.
    The trick to saving a remamed file with periods is to reselect jpg from the dropdown after renaming the file so the proper extension is added.
    That being said i've avoided using periods in file names for many years just to avoid any possible problems.

Maybe you are looking for