CS5 Save for web not showing in Name order..Help

Hi
I have noticed today that something has changed.
I am using Photoshop CS 5 on Windows XP Pro.
When saving images for web (for my proofing system i do which is saving photos of cars i.e CAR-10_01, _02 and so on then CAR-22_01, _02 and so on when i get to the part of selecting where to save i notice each time i save photos they are now appearing in the order they are saved as apposed to the order of name of the photo.
I have tried going to the folder and arranging by name it works in the folder fine, I have tried doing that on the small window when saving through PS it shows the files in order by name then but when i go to save the next photo it goes straight back to arranging them by modification which is a pain as certain files in this case care numbers are appearing all jumbled up as apposed to in car number order.
I have tried everything i can think of but it keeps reverting back to showing me them in order of time i have saved the files. Last week it was not doing this and i was seeing them in order of file name.
I hope this makes sense and someone can help me please?
Regards,
Jon

jmcg,
It is just a matter of monitor resolution.
And the fact that Illy counts 1 pixel as 1/72 inch.

Similar Messages

Is CS5 Save for Web not 64-bit?

I got a memory warning when trying to do a Save for Web with a 5K image. I was going to reduce it there. Is Save for Web limited to 32-bit RAM addressing?

5k? in resolution? so 5000 pixels high or wide?
If yes, you got this warning in all earlier versions to, as the Save for Web is not intended for these sizes of images. If only 5k file size there is a problem.

Animated Gif - Save for web not showing full frame range

Hey,
I'm trying to export an animated gif with 52 frames - I'm using the timeline in CS6, it's exported correctly in the past but when I try and save for web only a seemingly arbitrary number of rames appear in the animation. With no clear route to rectify this, I've tried to affect the outcome by simply moving things around on the timeline.
I've had a variety of frame ranges (and frames) numbering between 2 and 6 frames, far off my 52 target. It's a simple image and equally simple transition to keep filesize down but I'm completely bamboozled by this. It looks like a bug but any advice I could get would be much appreciated.

If it worked in the past with CS6 try resetting your CS6 Photoshop Preferences. If you still have the problem after that. Up load the PSD file to a server and post a link to it.

Save for Web not showing true scale

When I open Save for Web dialog in Illustrator CC 2014 - the drop down says 100% but what I'm seeing on my Mac screen is more like 50% When I click to Preview and it opens fine in browser...
I've got a Macbook Pro Retina hooked to a 27" Mac Thunderbolt screen.

jmcg,
It is just a matter of monitor resolution.
And the fact that Illy counts 1 pixel as 1/72 inch.

Save for web not working in Photoshop element 6

Save for web not working in Photoshop element 6. I am using Mac os x version 10.5.8 Anyone know how to fix that please tell me. Thanks

I just copy the preferences from my computer for you to see what are shown about adobe
file:///Users/raymondsmith/Library/Preferences/Adobe/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Illustrator%20CS2%20Settings/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Paths
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Settings/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Paths
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Settings /
file:///Users/raymondsmith/Library/Preferences/AdobeUM/
file:///Users/raymondsmith/Library/Preferences/AppleWorks/
file:///Users/raymondsmith/Library/Preferences/ByHost/
file:///Users/raymondsmith/Library/Preferences/CD%20Info.cidb
file:///Users/raymondsmith/Library/Preferences/CDDB%20Preferences
file:///Users/raymondsmith/Library/Preferences/cfx%23FBSxPfw
file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.90.sh.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Pro7.0.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.sh.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Uninstaller.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Adobe%20Help%20Viewer.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.ami.installer.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.bridge2.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.mediabrowser.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.PhotoshopElements.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader_ppc_9.0.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader.plist
file:///Users/raymondsmith/Library/Preferences/com.aol.aim.plist

Photoshop cs5 + Save For Web appends file names

Hey everyone :
Anyone know of a fix or a preference i can set? Hopefully, the response isn't "Can't do that anymore".
Example file name/structure:
Filename_partof-filename.version-01.00.psd
Issue (save for web):
CS3 - Filename_partof-filename.version-01.00.jpg
CS5 - Filename_partof-filename.jpg
Using a period as part of the file name was never a problem before CS5/5.5. Having to re-type half the file name in the SaveForWeb dialog is aggreviating/annoying to say the least. I know I can use hypens and underscores, etc but after using photoshop since v3 and using periods as part of my naming convention for 15 years, ...like I said, it's just an annoyance.
Anyone come across this? Suggestions?
Thanks tons,
Greg

Adobe Photoshop Version: 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch]) x64
...yep, everything up to date (more or less).
This isn't a recent CS5 issue but a CS5 issue from the day it was released...I just got aggreviated enough today with it to come here and see if I could find an answer. It's definitely a SaveForWeb issue and not SaveAs.
Here's a similar post from back in March 2011...http://forums.adobe.com/message/3509172#3509172
Just to be clear...
- Open new/old PS file
- Save with name.name.v.01.psd
- Quit PS
- Re-open file
- SaveForWeb
...if you're able to save it out with the file name in tact, I have no idea how.
I've tried 4 different CS5 Photoshops and they all truncate the name after the first period.

PS CS5 Save for Web and Devices reports "The operation could not be completed" ?

I teach in a lab of 27 computers, 110 students and part of the curriculum is teaching students to "Save for Web and Devices" this year for some strange reason none of my students can access "Save for Web and Devices" they get the error message "The operation could not be completed-A write permissions error has occured."
It has stumped our district top network support guru.
We are running PS CS5 12.0.4
He tried this posted fix but it did not work
http://involution.com/2010/06/13/adobe-photoshop-cs5-write-perimissions-error-on-snow-leop ard/
It worked once last Friday but today it failed, I'm getting very nervous about being able to prepare my students for the ACA exam without this function.
In a discussion forum they suggested "zipping and deleting" the save for web preferences, I tried that. Shut down Photoshop reopened it and that did not work.
I am at a loss. Seems like a bug.
Any ideas.
We are using iMacs running Mac OS X 10.5.8

The error message may not simply address the location to where the students will save a single file. The error likely applies to the temporary location where the various optimized versions might be automatically saved as you preview the image as JPG/PNG/GIF. I would wager that you would not see this error when you are logged into one of the students' computers as an admin.

Slices in Save for Web not highlighting when selected in Photoshop CS5.5

Lately I've just noticed when I select slices in Save for Web the newly selected areas do not highlight in their normal yellow colour. They are however selected and save correctly if I do save them. If I toggle slice visibility off and back on again they selected slices become highlighted but it's kind of a pain. Have I done something to cause this or is this a known issue with one of the updates?
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
on a Dell Precision T1660 running Windows 8.0

I just copy the preferences from my computer for you to see what are shown about adobe
file:///Users/raymondsmith/Library/Preferences/Adobe/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Illustrator%20CS2%20Settings/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Paths
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Settings/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Paths
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Settings /
file:///Users/raymondsmith/Library/Preferences/AdobeUM/
file:///Users/raymondsmith/Library/Preferences/AppleWorks/
file:///Users/raymondsmith/Library/Preferences/ByHost/
file:///Users/raymondsmith/Library/Preferences/CD%20Info.cidb
file:///Users/raymondsmith/Library/Preferences/CDDB%20Preferences
file:///Users/raymondsmith/Library/Preferences/cfx%23FBSxPfw
file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.90.sh.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Pro7.0.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.sh.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Uninstaller.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Adobe%20Help%20Viewer.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.ami.installer.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.bridge2.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.mediabrowser.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.PhotoshopElements.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader_ppc_9.0.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader.plist
file:///Users/raymondsmith/Library/Preferences/com.aol.aim.plist

Color management in Save for Web not working

The Save for Web dialog box in the CS6 Beta is ignoring color profiles, so color is not managed. This has not been a problem in previous versions.

The saved output is just fine. I was referring to the images in the Save for Web dialogue
I just checked my settings. CS6 apparently changed my Preview setting from "Use Document Profile" to "Monitor Color." It also changed my Metadata setting. It should not do that!
Restoring the correct Preview setting solved the color management problem, but ONLY for the Preview image. The Original image is still not color managed.
I'm on a wide-gamut monitor, so sRGB images come out looking garish if there's no color profile embedded or it's ignored. That's what's happening here with the Original image in Save for Web. I imported an sRGB image with profile embedded, and it looks just fine in Photoshop while editing. Then I went to Save for Web, with the settings Embed Color Profile, Convert to sRGB, and Preview: Use Document Profile. The JPEG preview too looks just fine with these settings, but the Original looks garish, showing a lack of color management. The color in the two views is showing as completely different, though they both represent the same image with the same color profile embedded.
Going back to CS5, the same image is properly color managed in both Original and Preview. Both images show identical color, as they should.

Saving Sliced files in Illustrator CS6 like it was in CS5 "Save for web and devices" gone?

Hello,
I used to save all my slices in CS5 and it would give me the option to save for web and devices, then when I was in there it would let me choose the option at the bottom Other... then I could go in and save it as a html and images and then it would automatically make div's for me when I brought it in to dreamweaver. Where did this option go in CS6? Can someone help I am on a big deadline, and I lost all my work transfering it back into cs5 to try it there like I used to. Attached is a .png to show what I mean.
Thank you,
DariusB
These options are not here in CS6 and I cant find it. I would really appreciate the help.
Thanks again.

Hi,
There have been some other changes too - here is the link to the article that describes the changes: http://blogs.adobe.com/ivandavid/illustrator_cs6_save_for_web/.
Cheers,
David

CS5 save for web bug with slices 1 png, the rest gif

Do me good forum, this is my first post from 112 degree AZ.
I'm trying to "save for web" slices in illustrator cs5. I optimize the images to transparent .png in the sidebar in the save for web dialog box. Then I click save. And I do the "user slices" option in the NEXT dialog (hello complicated process, but it makes sense to me). 5 slices should be output. 5 are. But only one is a png. The rest are gif files. And not transparent.
That makes me to throw an anvil through the floor of the USS(R) Adobe.
But rather than going through such extreme measures, I'd figure I'd post first.
I guess in the time I researched and wrote this post, I could have saved each individual slice with the proper optimization settings, but what fun would that be? And maybe I'm just plain missing somthing and someone will say, hey "footheadleg" your a total moron. The checkbox to save ALL the slices for your desired setting is at blah blah blah.
Do it. Shame me. And then, my problem will be fixed at last. MUwhwhwhwahahahaa.
FREE GIFT: cmd+shift+d changes illustrators white artboard to transparent pixels. I learned that becasue I thought maybe I had a white layer showing on accident. I didn't. That's because I'm perfect. Perfectly human.

Footheadleg, you have so much to learn, and so little time. Let me teach you my ways. Though while on Illustrator's main canvas it may seem that you can change settings of each slice, you can't. I know, there are little icons top left of each image, one looks like an email symbol, and it would seem you could just email the slice to a friend.
Pretty soon you'll be able to "Like" the slice on Facebook. Or post it to your del.i.cious account. Or tweet it. Or 17,000 other VERY VALUABLE shares. But Footheadleg, these symbols mean nothing to you, except that they are slices.
HOWEVER, when in "save for web" mode, you can in fact change the settings of each slice. Here's what you do. Press k. (slice tool selector thingie) then hop over to the sidebar and click on the settings you want. Do this for EACH slice. I know, it would seem easier if there was a checkbox that said "apply to all slices," but why make things easy?
Plus, Illustrator is a rad program, so don't knock it, unless you can design something better. And you can't. So get over yourself and enjoy the pain
Yours truly,
Yourself.

CS5 Save for Web won't let me save to Windows volume

I have a Windows Server 2003 volume mounted through Services for Macintosh (AFP, not SMB, I'm pretty sure). Even though both the Mac and the Windows volume can independently handle filenames longer than 31 characters, because of SFM (I'm assuming) I have never been able to save directly out of any application to that Windows volume with a >31 char file name. This has never been a problem as I've kept my file names short.
Having just installed CS5, however, Save for Web isn't letting me save any file, no matter how short the name: "Names longer than 31 characters are not supported on the destination volume." I can Save For Web just fine to my desktop and Save As... to the Windows volume, but not Save for Web to the Windows volume.
The Save for Web is set to "Images Only" (not slices so it's only creating the one file).
Any thoughts? Known issue?
thanks.

That might be part of what is going on (and doesn't look a thing like our internal filenames or anything else I recognize).
Probably it's something internal to the save dialog (NavagationServicesSavePanel), and it assumes that filesystems will be able to handle long names.
Again, using SMB to connect to the server may remove part of the restrictions.
CS3/4 was based on Carbon, and used different APIs for much of the file work.
CS5 moved to Cocoa, and has a new set of file APIs to deal with.

"Save For Web" not remembering save folder

Hi Guys,
I'm using the save for web function to save a large number of files (not batch saving).
Usually, when I open a file and start saving for web, it will remember the folder that I most recently exported to, and by default open that folder for that file, until I "save for web" into a different folder.
Out of seemingly nowhere, the save for web seemed to "forget" this folder (and any other folder I tried to save to), and now defaults to the "Documents" folder, causeing me have to click through to find my intended destination folder.
Any ideas? Google was not a help on this one, I can't seem to find anyone with a similar issue.
I'm on CS5 & Mac running Mountain Lion. On my work computer (exactly the same, Mac + Mountain Lion) I am using CS6 and have not encountered this issue.
- Caitlin

Caitlin,
You may try the following (you may have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy);
If nothing else helps, even more seriously, you may:
6) Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Quicktime 10 "Save For Web", spaces in file names?

Maybe I'm overlooking something here, but:
When using Quicktime 10's "Save for Web" function, it exports movie source files that all have spaces in the filenames (i.e. "Movie - iPhone.m4v" etc)
Now correct me if I'm wrong, but most web servers DO NOT like having spaces in the filenames, and every time I try to upload them to one of our web servers, I'm getting an error message that says it doesn't like the file.
Simply removing the spaces from the filenames causes the Quicktime reference movie to stop working, as you might expect.
Am I missing something here? How would someone possibly get this to work?

Thanks for the reply - actually it was helpful, and was the final nail in the coffin for Yahoo Webhosting for us. We've been using it for years, and even though it ***** terribly (and I mean TERRIBLY, horribly, painfully), we've stuck with it just because it's been easier to use it than to not switch. But you're exactly right... I tried uploading files to Cachefly with spaces in the name, and bingo, works perfectly.
Thanks.

Photoshop CS6 Save for Web not working

I am using photoshop CS6 (cloud) on Mac (10.7.5) and when I use the Save For Web > save, i got the following popup :
---- Adobe Save For Web Error ----
Could not complete this operation. An unknown operating system error has occurred.
I have been using CS6 for months and it worked fine yesterday before shutting done. Today morning at startup it was not working anymore.
I have tried to uninstalled and reinstalled photoshop, clear my presets, shut down/started up, repair disk, repair permissions,... without succes.
The save for web function still works in CS5.
Any help will be very much appreciated,
Raphaël K.

I found the solution (took forever to consolidate all the answers) for OS X 10.9 + Maverick. Finally!
1. Change permissions (as AOTPR says) to your User/Library/Preferences file so that your admin and user (the one you are using) has read + write permissions within the Get Info pane (command+I). You may have to add them with the sign.
2. Delete Adobe save for web 12.0 Prefs & Adobe save for web 13.0 Prefs files within the User/ Library/ Preferences folder. These may be hidden for some people, so when in a finder window, hold Option(alt) and click Go from the main top menu (keep holding Option/Alt) and click Library — the full Preferences folder should open for you.
3. Change the view when in Save for web pane in PS. If you have it in Cover Flow — it won't work. Change it to another view like List or Columns view.
Presto! Works for me on Maverick.
Thank god. It took forever to get this cleared up!!
If you have any questions, email me [email protected]

CS5 Save for web not showing in Name order..Help

Similar Messages

Maybe you are looking for