Cs5 service manager

i'm a subscriber to creative cloud with cs6, but i'm getting an annoying popup trying to run "cs5 service manager", how do i stop this?

You might uninstall any CS5 products on the system you don't use anymore. The CS5 service manager checks online services for CS5 products.

Similar Messages

CS5 Service Manager crash

My system: Windows 7 Ultimate 64-bit; Dual 3.2GHz XEON CPUs; 16GB RAM; 500GB HD; Radeon X1700 (Dual monitors); fully updated and in good health.
I installed CS5 Master Suite fresh (not an upgrade) from the Student/Teacher distribution DVDs, and immediately following this I allowed it to download and install all updates.
However, as soon as I start any application in the suite (except Acrobat), I get a message saying that "Adobe CS5 Service Manager has stopped working". The details are as follows:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    CS5ServiceManager.exe
Application Version:    5.0.1.134
Application Timestamp:    4c48a5c7
Fault Module Name:    CS5ServiceManager.exe
Fault Module Version:    5.0.1.134
Fault Module Timestamp:    4c48a5c7
Exception Code:    c0000005
Exception Offset:    0000fee2
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    6153
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I have trawled the forums and FAQs but have not found any idea what might cause this. Has anybody come across this problem before and have any suggestions about how to fix it?
Thanks

Thanks for the input.
My issue isn’t so much with CC (it’s working fine), but when I open indesignCC I got the message that CS5 Service manager needed a legacy version of java to run.
This issue seems to be a legacy issue going back from CS5. When you click on more info, it just takes you to a blank HTML page.
I went through the Hardrive/Library/ApplicationSupport/Adobe/CS5ServiceManager Folder... and simply deleted it.
Theres lots more out-dated junk in there. Uninstall doesn't get everything I guess.
Thanks,

CS5 Service Manager error message?

I keep getting the CS5 service manager error message - ordinal not found. Specifically ' the ordinal 3873 could not be located in the dynamic link library LIBEAY32.dll' Any ideas please on how to fix this?

That's very puzzling, but you seem to have an older version of the Adobe Extension Manager for CS5.x. You are on 5.0.x, R_Kelly mentions 5.2.x, and I'm on 5.5.x
Maybe you need to make sure you are updated to Photoshop 12.1 update first, then make sure you are updated to Adobe Extenson Manager 5.5.0.163.
This is the version of the AEM that I have for Photoshop 12.1 (CS5.1) which resides on my Snow Leopard 10.6.8 boot HD:
And this is the version of the AEM that I have for Photoshop 12.1 (CS6) which resides on my Lion 10.7.5 boot HD:
This is the Photoshop 12.1 (CS5.1) application info:

"CS5 Service Manager" dialogue box fix.

Hi,
I'm looking for a fix for the "CS5 Service Manager" dialogue box that comes up on a mac, after installing Yosemite. Any ideas how to turn it off or uninstall?

Thanks for the input.
My issue isn’t so much with CC (it’s working fine), but when I open indesignCC I got the message that CS5 Service manager needed a legacy version of java to run.
This issue seems to be a legacy issue going back from CS5. When you click on more info, it just takes you to a blank HTML page.
I went through the Hardrive/Library/ApplicationSupport/Adobe/CS5ServiceManager Folder... and simply deleted it.
Theres lots more out-dated junk in there. Uninstall doesn't get everything I guess.
Thanks,

Adobe Service Manager CS5.5 wont quit

Adobe Service Manager CS5.5 seems to hang after I use Photoshop. Fine with Indesign etc. (even after closing photoshop). This prevents my iMac from shutting down. How do I switch it off/disable it or repair it in OSX7?
Any thoughts anyone? Its driving me crazy. It ends up on a grey screen with spinning icon indefinitely.

Using terminology valid for Windows that may have analogs on the Mac: there could be an Adobe service or a scheduled-task that is relaunching ASM after you have closed it. The ASM might also be a program that can be uninstalled that is not part of the suite so wouldn’t be cleaned up by CC cleaner.

Reporting In Service Manager 2012 - How To Get A List Of All Service Requests Regardless of Status

Within the Custom Reporting Options available to users of Ssystem Center Service Manager 2012, which would one use to create reports that do not contain any agregated data but are instead detail level info such as a list of all Service Requests reardless
of status? I want to include within the report the same data you see on the main page of a Service Request when you double-click a Service Request within Service Manager and it pops opne the details of the Service Request.
I'm trying to get the following info for each Service Requests
SR ID (i.e. SR1234)
Affected User
Title
Description
Priority
Source
Area
Support Group
Assigned To
Created By and Created On
I know the cubes w/Excel offer a great way to get data for a **piece meal report or for getting agregated data (I.E. counts, sums, avergares, Max's & Mins) but I need a report that has zero totals and no agregations.
Thanks
** A piece meal report is a report that has to be manually pieced together by combining data from others reports and other sources because no single report can be constructed to bring all the data togethere into a single report. If you've ever
worked with an accountant taht uses Excel for everything but who has no idea how SQL or databases in general are deisgned then chances are you've either been asked to create a piece meal report for them and or seen them do one them selves when they open a
spreadshet and dump into it disperate data from a variety of sources and then ask you why you can't automate that same report for them.

the following thread covers some good SQL queries to get details about the Incident Request, just amend them to cover the Service Request
http://social.technet.microsoft.com/Forums/systemcenter/en-US/e703641d-3e05-4df4-be2b-bf9bd62534f8/how-to-generate-incident-report-with-incident-description-field-in-scsm-2012-sp1

How to call a web service that is managed by web services manager from omni

Ok gurus... here is an interesting one for you.
We have a set of web services that are deployed to our server. We have Oracle Web Services Manager deployed to another server and is acting as a gateway to our web services.
We would like to call our web service and pass it the username and password that were specified in the omniportlet connection information screen. How do we go about doing this?
PS. We are using the latest version of portal (10.1.4).
Thanks for your help.
Cheers,
Cory

Just a follow up. What I would like to do is to have omni portlet add standard header information for security such as the following:
<soap:Header>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken xmlns:wsse="http://docs.oasis-open.org/wss/200401-wss-wssecurity-secext-1.0.xsd">
<wsse:Username>theusername</wsse:Username>
<wsse:Password>thepassword</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
Any ideas on how to get omniportlet do this? Any ideas on where to look for the answer? Oracle dudes: Any plans to add this to future releases?
Thanks again folks :-)
Cory

MRS Push with SMP 3.0 and Service Manager 4.2 is not working

Hi All,
I am working on SMP 3.0 SP 06 Service Manager 4.2 application .
I have configured MRS Push which is not working . Service Order push is working fine.
If anyone has configured MRS push with any one the Syclo mobile products ,Please share the steps.
Thanks in advance.
Thanks
Neha

Neha,
Can you refer this OSS note: 2014454 for MRS setup.
Thanks,
Manju

How to create a Domain user in a Specific OU using System Center 2012 R2 Orchestrator and Service Manager

Dear All,
I have a simple Runbook with the following details:
Initialize Data: (First Name, Last Name, Login Name, Deparment Name) --> Create User: Name:(Domain), Common Name, Display Name, First, Last Name, SAM Account Name (From Initialize Data) --> Enable
User: Distinguished Name --> Add User to Group: Group Distinguished Name, User Distinguished Name
Active Directory Management Pack in place and the Prerequisites Configurations are added Too (Configuration User Name, Configuration Password, Configuration DC, Configuration Default OU.
The Runbook is Synched with Service Manager, Request Offering/Service Offering and published to the portal.
When I filled the 4 required values (First Name, Last Name, Login Name, Deparment Name), the Runbook will kick off and the user is created in Active Directory.
The user is placed in the Default OU which is predefined in AD Prerequisites Configurations in Orchestrator.
I need to add another Required Value to my Request Offering (SR) called User Level Enum List (Low, Medium, High).
I need to place the user in a Specific OU based on the Level entered from SSPortal, If the user is Low, then Create the user in this OU, if the user is Medium then create it in this OU, etc...
How can I do this in Orchestrator? What I want to modify in my runbook to accomplish this task?
Thank you,

I AM TRYING TO USER/MAILBOX CREATION PROCESS, FOLLOWING IS THE BUSINESS REQUIREMENT
GET THE USER FROM ERP SYSTEM (SQL)
CREATE USER IN SPECIFIC OU
ENABLE THE MAILBOX IN SPECIFIC DATABASE BASED UPON USER ROLE
CREATE A USER IN NAVISION SYSTEM WHICH IS AGAIN JUST CREATING SQL LOGIN.
PLEASE ADVISE ME THE PROCESS AND PROCEDURE ILLUSTRATION IF IT ALL POSSIBLE IN SINGLE RUNBOOK.
I AM ABLE TO CREATE USER/MAILBOX BUT STRUGGLING TO CREATE IN SPECIFIC OU/MAILBOX DB AND SQL LOGIN.
FARRUKH
[email protected]
Farrukh Anwar

Remote Desktop Service Manager - configure permissions for Remote Desktop Users to Send Message, Disconnect, Logoff

Hello, dear colleagues.
We are using Windows Server 2012 R2 as Remote Desktop Server. Also use Windows Server 2008 R2 with Remote Desktop Service Manager to control RDS user sessions (Send Message, Disconnect, Logoff, Query Info).
Send Message, Disconnect, Logoff options works only for users in Administrators group.
I can't to configure permissions for Remote Desktop Users, specific user or AD group.
To set permissions I'm running RDS Host Configuration on Windows Server 2008 R2 and connect to Windows Server 2012 R2. Then double-click
RDP-Tcp, Security tab, add specific user account , AD group or configure
advanced permissions
for Remote Desktop Users.
But, as I sad above, these options works only for users in Administrators group. How to make it work for Remote Desktop Users or specific user, AD group?
Thanks.
P.S. If move specific user from Remote Desktop Users group to Administrators group on
Windows Server 2012 R2 - it works.

Hi,
You can prevent administrators from changing the permissions for a connection by applying the
Do not allow local administrators to customize permissions Group Policy setting.
This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
Apart there is one command with which you can set the permission for that check the related
article. Additionally checkthis
thread for more detail.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Confirming method to secure web services through oracle web service manager

Hi All,
I am just wondering about the method to secure web service through oracle web service manager.
I have a unsecure web service "helloworld" which is deployed on JWSDP1.6 toolkit.I want to secure it through oracle web service manager.
Inorder to secure this unsecure web service,I use gateway(web service manager for securing web service using message level security through certificate).
So when client want to access the helloworld service,it contacts the gateway securely and gateway intern connect to original web service after decrypting and verification of the signature.When gateway gets response from the web service,it signs the response message and then encrypt and passs on to the client.
So my question is,is it the right way to secure web service?
As I am getting the following fault exception :
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode "http://schemas.oblix.com/ws/2003/08/Faults">c</faultcode>
<faultstring>Step execution failed with an exception
</faultstring>
<detail></detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I checked the log at :
C:\coresv_install_home\external\oc4j-10.1.2.0.0\j2ee\home\log\http-web-access
but there is no helpful information available.Thanks for any help.
Kash

Hi Rajesh,
Thanks for your reply.I am using the following policy steps:
1)for Request (Decrypt and Verify signature).
2)for Response(Sign Message and Encrypt).
The configuration for Request is shown below:
Pipeline "Request"
Pipeline Steps:
Start Pipeline
Log
Decrypt and Verify Signature
Basic Properties Type Default Value
Enabled (*) boolean true true
XML Decryption Properties Type Default Value
Decryptor''s keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-keystore.jks
Decrypt Keystore Type (*) string jks jks
Decryptor''s keystore password string *******
Decryptor''s private-key alias (*) string s1as
Decryptor''s private-key password string *******
Enforce Encryption (*) boolean true true
XML Signature Verification Properties Type Default Value
Verifying Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-truststore.jks
Verifying Keystore type (*) string jks jks
Verifying Keystore password string *******
Signer''s public-key alias (*) string xws-security-client
Enforce Signing (*) boolean true true
End Pipeline
And the configuration for Response is shown below:
Pipeline "Response"
Pipeline Steps:
Start Pipeline
Log
Sign Message and Encrypt
Basic Properties Type Default Value
Enabled (*) boolean true true
Signing Properties Type Default Value
Signing Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-keystore.jks
Signing Keystore Type (*) string jks jks
Signing Keystore password string *******
Signer''s private-key alias (*) string s1as
Signer''s private-key password string *******
Signed Content (*) string BODY BODY
Sign XPATH Expression string
Sign XML Namespace string[]
Encryption Properties Type Default Value
Encryption Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-truststore.jks
Encrypt Keystore Type (*) string jks jks
Encryption Keystore password string *******
Decryptor''s public-key alias (*) string xws-security-client
Encrypted Content (*) string BODY BODY
Encrypt XPATH Expression string
Encrypt XML Namespace string[]
End Pipeline
I checked the log again but nothing useful there,it is just giving the following values:
2006-08-14 16:32:50,372 INFO [Thread-21] mstore.OLiteMStore - SELECT MEASUREMENT_STR FROM MEASUREMENT_PERSISTED_STORE WHERE ID=? FOR UPDATE
2006-08-14 16:34:50,364 INFO [Thread-16] mstore.OLiteMStore - INSERT INTO MEASUREMENT_PERSISTED_STORE (ID,DEF_ID,CONTEXT_ID,PARENT_CONTEXT_ID,TIME,STORETIME,KEY0,KEY1,KEY2,KEY3,KEY4,KEY5,KEY6,KEY7,KEY8,KEY9,KEY10,KEY11,KEY12,KEY13,KEY14,KEY15,KEY16,KEY17,KEY18,KEY19,KEY20,KEY21,KEY22,KEY23,KEY24,KEY25,KEY26,KEY27,KEY28,KEY29,KEY30,KEY31,KEY32,KEY33,KEY34,KEY35,KEY36,KEY37,KEY38,KEY39,DBM0,MEASUREMENT_STR) VALUES(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,'R',empty_clob())
2006-08-14 16:34:50,364 INFO [Thread-16] mstore.OLiteMStore - SELECT MEASUREMENT_STR FROM MEASUREMENT_PERSISTED_STORE WHERE ID=? FOR UPDATE
Any help would be appreciated.Thanks.
Kash

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

Windows Service Manager 32-Bit Has Stopped Responding/iPod not showing up in iTunes

Hello,
I've scoured this forum for answers but I cannot find any result that works. I have an iPod classic that I've connected to my Gateway running Windows Vista for over four years without issue. When I was using iTunes 9 the other day, I plugged my iPod into my computer, but it only connected to My Computer and didn't connect to iTunes and update my iPod accordingly. So, the iPod is charging and the iPod is showing the "Connected, Eject before disconnecting" screen, but it isn't adding new music (which kind of defeats the purpose of buying new music). I thought it was because I was using 9, so I downloaded iTunes 10, but the issue still popped up.
This hasn't pop up today after I installed 10, but back when I was using iTunes 9 the following error came up on my computer: "Windows Service Manager 32-bit Has Stopped Working." Now, no error messages pop up, even though the problem persists.
I've tried suggestions in this post as well as in this post. Also, with the fix being recommended in those threads to change the code in Notepad by clicking "edit" under the System tab under My Computer? There's one problem - there is no edit button on my options. I've included a screen grab to prove this.
I don't know if the relative age of the discussions makes any difference - maybe a new fix has com up and i'm just not finding it? Plus, since this issue began with iTunes 9, I can't help but feel like getting rid of iTunes 10 is going to help the issue, either.
This is incredibly frustrating, not being able to add new music to my iPod, so if anyone can help me out, I would greatly appreciate it, as previously recommended ones aren't useful.
Screen grab of iPod connecting to My Computer, but not iTunes:
Screen grab of the lack of an "Edit" button in the place to edit codes as recommended in previous topics:

One again shamelessly asking for help

Service Manager data warehouse management server Installation fails

Hi there,
In Virtual Machine Windows Server 2012 R2 Standard with my user being a Local Admin and SQL Admin. I tried to do a Service Manager data warehouse management server
first installation I am facing the following image as error:
In the event viewer I get the following error:
"Microsoft System Center 2012 R2 Service Manager -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211
The arguments are: -2147024809, The parameter is incorrect."
In the Setup log, some of the errors are:
WixRemoveFoldersEx: Entering WixRemoveFoldersEx in C:\Windows\Installer\MSI35E.tmp, version 3.7.1224.0
WixRemoveFoldersEx: Error 0x80070057: Missing folder property: PSCONFIGFOLDER.A591E3B4_D228_431D_BF89_99D52C8FFB76 for row: wrf4582BC4C5CC47B1D2380408CD7A752DC.A591E3B4_D228_431D_BF89_99D52C8FFB76
CustomAction WixRemoveFoldersEx.A591E3B4_D228_431D_BF89_99D52C8FFB76 returned actual error code 1603 but will be translated to success due to continue marking
CAStartServices: CAStartServices was passed . OMCFG
CAStartServices: Checking if service already started. OMCFG
CAStartServices: Attempting to start service. OMCFG
CAStartServices: StartService failed. Error Code: 0x8007042D.
ConfigureSDKConfigService: CAStartServices failed, trying again.... Error Code: 0x8007042D. OMCFG
Action start 17:47:05: _SetHealthServiceConfig.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMServer
MSI (s) (EC!4C) [17:47:05:483]: Note: 1: 2711 2: MOMGateway
SetHealthServiceConfig: Failed to get Feature State.. Error Code: 0x80070646. MOMServer
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMGateway
I have checked the following post but it did not help me:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/c42bb04d-a51e-4037-a8a3-37d714d6faac/scsm-management-server-installation-fails?forum=systemcenterservicemanager
Could you please help me with this issue?
Thanks a lot,
M

Hi,
Sorry I cannot post the full log. I have found also these errors in the log:
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.RegisterSdkSCP
RegisterSdkSCP: There is no previous serviceConnectionPoint
RegisterSdkSCP: Creating New serviceConnectionPoint
RegisterSdkSCP: Adding ACL for current user: DOMAIN\InstallationAccount
RegisterSdkSCP: Adding ACL for SM Admini: DOMAIN\SCSMDWadmins
RegisterSdkSCP: Error: Access is denied.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "D:\Program Files\Microsoft System Center 2012 R2\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallHSPerfCounters: Failed to install agent perf counters. Error Code: 0x80070057.
Thanks for your reply.

Service Manager Authoring Tool 2012 SP1 Missing DLL's

Hello All,
Originally posed this to the MS partner forums and was asked to post here.
I'm hoping someone familiar with the Authoring Tool For service Manager can help me. I'm using the Service Manager Authoring Tool 2012 SP1 found at the link below. I believe this to be the latest available.
Although the splash screen says Service Pack 1 Beta? Hoping the dev forgot to update the splash screen.
http://www.microsoft.com/en-us/download/details.aspx?id=36214
I'm trying to create a new custom Service Request form and am getting prompted for some DLL's that seem to be workstation related or at least the Aerolite.dll makes me thing Windows Aero. (Could be wrong)
I've successful created a new Management pack, and I created a new Class that inherits the properties of the Service Request Class. I've added all the properties I need for the new form. All is well no issues there.
The next step is to create a new custom form. I select the create new custom form. Give it a simple name, and select my assembly then the form type. I'm then prompted for several DLL files that are not on my system
and I'm not sure where to find them.
The DLL's are:
Microsoft.EnterpriseManagement.UI.ExtendedControls.Aerolite.dll
WPFTToolkit.AeroLite.dll
I can select cancel several times to get ride of the prompt for the DLL's and can customize the from without issues. I don't think this is correct but I have been able to create the form.
Does anyone know where I can find the above DLLs? Am I doing something incorrect here? Is this a bug in the authoring tool? If so is there an updated version I should be using?
I also receive the same prompt for DLLs when attempting to create a custom incident form....
My test environment is running Server 2012 R2 with Service Manager 2012 SP1. Went ahead and tried this using the Service Manager 2012 SP1 Eval VHD and had the same issue...

Hello Gabe,
The following post provides some insight on the Aero DLL's.
Hi Matt,
The Aero dll is only available on Vista so the tool will not find it when running on a different OS (e.g. Server 2008). However, you can safely cancel out of that it does not affect the form.
Regarding moving controls between tabs, unfortunately that's not supported this release.
It sounds like you did everything right, so let us try your MP here and see if we can reproduce the crash you are seeing and investigate it.
Thanks,
Cori
Another post regarding 'Beta' on the splash screen.
Yes, someone forget to change the splash screen :)
Rob Ford scsmnz.net
Cireson www.cireson.com
For a free SCSM 2012 Notify Analyst app click here
Can't post links to the full posts as this is a new account but I am sure you can find the referenced articles here on TechNet with the help of Bing or Google.
Hope this helps.
~Nick

Cs5 service manager

Similar Messages

Maybe you are looking for