CS5: Spell Checking in Preview Mode?

I like to compose in a WYSIWYG interface, so I use Preview Mode to dodge all the visual distractions. I may be mistaken, but it seems like the upgrade to CS5 killed the ability to see spellcheck cues in Preview. I guess it makes sense, but I was wondering if there is a pref or a setting I am missing to enable it. Thanks!

Are you talking about Dynamic Spelling or the traditional spell checker under the edit menu?
The latter should be showing you highlighted words it finds, the former disappears.

Similar Messages

Illustrator CS5 Spell Check No Longer Works?

Mac 10.8.5, Illustrator CS5
Spell Check has stop working... it no longer picks up any misspellings. Any ideas?

What language is assigned to the file? Make sure that the More Options are shown in the Character panel and at the bottom, what language is assigned?

In Design CS5 Spell check skipping text boxes

I'm running Mac OSX 10.5.8 on my MacBook.
I am working on a menu with a number of text boxes. When I do spell check it seems to only check the box where the cursor is located. I have tried doing Cmd+A ( to select all the boxes on a page) and it doesn't seem to help.
I have dynamic spelling enabled, but there are words I know spellcheck dislikes that don't have red lines beneath them.
I have all the preferences checked and Language:English:USA is in place. Case sensitive is also checked.
Any ideas? I'm nervous I'm going to miss a spelling error which will doubtless subject me to endless ribbing from my coworkers. However, selecting the actual words in each individual text box will take forever.
Thanks!

jeminky wrote:
That's what I thought, but it didn't seem to be doing so. There are a number of words I haven't added to my dictionary purposefully - such as bleu - because, while I use them a lot when doing menus, I'd hate to have the word "blue" misspelled in another doc and miss it.
You can create a character style with the language property, such as French, and any other specific properties you like. ID uses the specified [EDIT] language's ]/EDIT] dictionary when spell-checking content, so "bleu" tagged with the French character style will pass the checker, but "bleu" tagged by default as your default language, like the overwhelming preponderance of your text, will be detected as an error.
HTH
Regards,
Peter Gold
KnowHow ProServices.
Message was edited by: peter at knowhowpro

Spell Check in Photoshop CS5

When I use the spell checker in Photoshop CS5 to check a text layer (in English), all I ever get is a message saying "Spell check complete" -- never any evidence of any errors being detected. It would be nice to think I'm a perfect speller, but the reality is it does this even when I can clearly see there are mistakes (for example, I've tested it by inserting gibberish words into my text). Where are the spelling dictionaries, etc. installed, and what files should I find there for English spelling?
Thanks!

Did you select the text to be checked first with the Horizontal Text Tool?
Do you have the proper language selected in the Character panel?
-Noel

CS5 DW Spell Checker

I get an error message that says "The spell checker could not be initialized." How do I fix that?

Hello,
did you follow this here (see in particular, point 1):
http://help.adobe.com/en_US/dreamweaver/cs/using/WSc78c5058ca073340dcda9110b1f693f21-7cc8a .html
Hans-Günter

Pages 08 - Spell check as you type has stopped working

Hi,
My Pages 08, which is ticked to 'check spelling whilst typing' is no longer checking spelling as I type.
It was working fine yesterday, but has stopped today.
Moreover, it's not even spell checking when I ask it to do it manually.
Can anyone help?
Regards,
Mont3

I didn't install the British English language on my machines so I can't check the behavior of Pages when this language is the first one.
Here is the brute force way describer for the Blank template used in WP mode.
It would be the same for others.
ctrl click the Pages.app icon
show package's contents
open Contents
open Resources
open Templates
open Blank
ctrl click Blank.template
duplicate index-iso.xml.gz or index-trad.xml.gz in a safe area (folder named Pages-Blank-template ).
double click index-iso.xml.gz or index-trad.xml.gz
You will get index-iso.xml or index-trad.xml
Open it with TextEdit or TextWrangler for instance.
Search for
<sf:language><sf:null/></sf:language>
Replace all occurences by
<sf:language><sf:string sfa:string="en_GB"/></sf:language>
save index-iso.xml or index-trad.xml
for English, the replacement string would be:
<sf:language><sf:string sfa:string="en"/></sf:language>
for French it would be:
<sf:language><sf:string sfa:string="fr"/></sf:language>
for Spanish it would be:
<sf:language><sf:string sfa:string="sp"/></sf:language>
The next time you will use this template, it will default to British English everywhere.
Yvan KOENIG (from FRANCE mardi 16 septembre 2008 16:44:00)

When I right click, I can't copy or spell check or open a tab in a new window.

When I right click on a picture, it doesn't give me the option to copy or to view in another tab as a separate image from the web page it is on. I no longer have the option to spell check. When I highlight text to copy, it doesn't give me an option to copy it but only says "copy link location". I can open a new tab by holding down the control key and clicking the link I want open in a new tab but when I right click and click "Open in new tab" it does nothing. This started happening about a week ago.

You can try to update to Firefox 21 that has been released today.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to troubleshoot issues that Spell Check is not working in Outlook 2013

When composing a new message in Outlook 2013, we may notice that Spell Checker does not recognize misspelled words. When we enter a completely garbage word in Outlook, it won’t be marked as misspelled with a red wave underline. When encountering such issue,
we may follow the troubleshooting guide below to correct it.
1. Make sure you are not typing in the signature area.
Outlook doesn't perform a spell check in the signature area, so if this is the case, spell check won’t work. To confirm if you are typing in the signature area, right click in the area you are typing, if you see a menu listed all you signatures instead of
the normal context menu, then you are not typing in the email body.
If you want spell check work in signature area, use Quick Parts instead of Signature. For more information, see
Quick Parts.
2. Check the Set Proofing Language option.
In Outlook, click New Email to open a new message, click
REVIEW tab > Language > Set Proofing Language, a dialog titled
Language will open.
Please first make sure English (United States) is shown above the double line. If not,
you must enable the language for it to be available to check spelling.
Second, make sure “Do not check spelling or grammar” check box is not selected.
Note: If this method fixes the problem, repeat steps 1 through 3 to reopen to the
Language dialog box, and then click Set As Default.
3. Enable Check spelling as you type.
To enable the option in Outlook, go to File > Options > Mail, click Spelling and Autocorrect button. In the Editor Options dialog, select the check box labelled “Check spelling as you type”.
4. Make sure that you are not using a standalone version of Outlook or mixed versions of Word and Outlook.
The “Check spelling as you type” feature doesn’t work when using a standalone installation of Outlook or mixed versions of Word and Outlook. However, the manual spell check always works. In this scenario, we can set Outlook to
always check spelling before sending. To do this, go to File > Options > Mail, select the check box before “Always check spelling before sending” in the Compose message section.
5. A registry key exists overriding the spell checker
To remove the registry key, please follow these:
Important This article contains information about how to modify the registry. Make sure that you
back up the registry before you modify it.
a. Press Windows key + R to open the Run command.
b. In the Run box, type regedit, and then press Enter.
c. Locate the following registry subkey:
HKEY_CURRENT_USER\Software\Microsoft\Shared Tools\Proofing Tools\1.0\Override
d. Delete or rename the subkey.
e. Exit Registry Editor. Restart Outlook.
6. Recreate the NormalEmail.dotm and Normal.dotm template
If the two templates above are corrupt, this issue may also happen. To fix it, please browse to:
drive:\Users\username\AppData\Roaming\Microsoft\Templates
Rename the two templates, then restart Outlook to see the result.
7. Problematic add-in
Add-ins may cause various issues in Outlook, so if you have tried all the suggestions and still no luck, try starting Outlook in safe mode to see if a problematic add-in is the culprit. To do this, exit Outlook, press Windows key + R to open the Run
command, then type outlook /safe and press Enter. If the problem disappeared in safe mode, then go to File > Options > Add-ins and disable the suspicious add-in to resolve the problem.
If you have any comments, welcome to post in the forum. Thank you.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Not all locales come with a dictionary installed for licensing reasons. 
If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions) and selected. 
 
You can see which dictionary is selected if you right-click in a text area and open the Languages submenu. 
Also make sure that [X]"Check Spelling" in the right-click context menu has a tick. 
You can also try to toggle the "Check Spelling" item off and on again. 
 
See http://kb.mozillazine.org/Spell_checking and [[Using the spell checker]] 
See also http://kb.mozillazine.org/Dictionaries

Images are not loading - but work in Preview mode

Hi -
I was wondering if anyone can help me. I'm kind of new to Dreamweaver and I can't seem to figure this out on my own.
I'm using Dreamweaver 8. I developed a web page based on a template in which everything works perfectly in "Preview" mode on all browsers. But when I uploaded the files to my remote hosting, the template based images (found in the "images" folder) are not loading on the page. The images that I added to the template myself, found in the same "images" folder ($200,000 in ..., and picture at bottom) are loading. So some of the images in the images folder are loading some are not.
I've checked the Images folder on the remote site, and they all seem to be there. I've also checked for broken links, and I'm not getting any (I don't know if that would help w/ missing images or not, but I'm trying everything I can think of). I also checked to see if there is a separate CSS style sheet, and there wasn't one supplied with the template (there is some CSS info in the code on the html page). The image sizes are all small enough as well. Can anyone help me with this?
You can view one of the pages at: http://www.200kin5months.com/squeeze-video.html
Thank you in advance to anyone who might be able to help!
Stacey
PS - I've attached a screenshot from Dreamweaver Preview to show what it is supposed to look like.

Your Web server is running on an operating system that is case-sensitive. You appear to have uploaded an Images folder, but not an images folder.
You do not have a file here:
images/squeeze-video_425x344_r9_c6.jpg
But you do have a file here:
Images/squeeze-video_425x344_r9_c6.jpg
So you'll need to either change all your image/<whatever> links to point to Images/<whatever>, or upload another folder named images.
Or, if you want to use a single folder, and if your local file system is not case-sensitive, you might be able to do it in DW's file panel. Here is a method that you might use to have all of them in a folder named images.
BACK UP YOUR SITE FILES
Rename Images to Foo (allow DW to update links)
Rename Foo to images (allow DW to update links)
Upload the images folder and any/all files that DW changed
Delete the online Images folder
HTH
Mark A. Boyd
Keep-On-Learnin' :-)

Bridge crashes when hitting spacebar to go into preview mode.

Hello there,
So, whenever i've been in Bridge for a little while and want to do a full preview mode by hitting the spacebar I get the dark grey screen and after awhile "the spinning beach ball of death" appears. This continues until I have to force quit Bridge. When I restart bridge and try to do a new preview right away the same problem occurs imeditly.
I've tried to delete all the preffs both manually and automatically by holding down the option key during start up, but nothing helps. I've also installed the latest updates.
I'm on a pretty new Macbook Pro 2.53 GHz Intel i5 bought this summer with a SSD harddrive and 4gb of RAM if that is of interest.
Am I way off if I think it could have to do with the graphics card?
Well I'm thankful if anybody has solution for this.
Best,
Per

Deleting prefs manually seems to be OK although I personal would not bother
about the last workspace
> I don't really understand this part you wrote.
"What setting do you generally have for Bridge preview, always high Quality
or on demand or embedded previews
In Bridge Path Bar top right there are two small checker board icons. The
left one is just a shortcut for prefer embedded previews that only let you
cache the thumbs. A quick way to view the content of a non cached folder and
have the option to glance through thumbnails without having the need to wait
for all the previews to be build.
The right one gives you 3 options, first prefer embedded (same as left icon
and in fact is double but there are still more strange things in Bridge
regarding to workflow I'm afraid...)
Second is High Quality on Demand meaning the HQ preview builds when you
select the file. Somewhat useful but time costly when having to click on
several files and every time have to wait for the building of the preview.
Third is Always HQ. This one I prefer to have set as default. It means that
you have to wait longer for all the previews to being build but this is only
once and after this you can browse freely through all the files.
Having set to also build monitor sized previews in the prefs means you also
have to wait a little longer once when the folder builds cache but this is
in the same go after file ingestion and after this you can use the space bar
almost without delay to see a full screen preview. (And I'm on a 30"" Apple
Cinema display using mostly files from a EOS 1Ds3, big files, big screen
When it comes to size it can be any size, either a large psd. file or a tiny
.jpg. And i have my max set to 1000mb.
With this setting files above 1000 MB don't build previews but that should
not cause trouble when hitting spacebar, it only shows the small thumb on a
full screen with gray background and surely should not let Bridge crash.
Try also system maintenance with check and repair permissions.
And if the problem still persist create a new user for testing, log in under
this new account and try if the problem is still there, just to rule out
your current user account as the culprit.

Mac: When I click on a misspelled word in the body of an email the spell checker defaults to first word in the email even if it already spelled correctly

The spell checker identifies incorrect spelled words, however when I right click or control click the word the spell checker only highlights in yellow the first word in the email and gives a dialog with the spelling and definition even though that word already correctly spelled. This is version 33.1 on my mac desktop running 10.10. Spell checking works properly if I use Safari.

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

T-Bird does not spell check the subject line of an email. (v24.4.0).

Hello,
When composing an email I have chosen to have Thunderbird 24.4.0. check for misspelled words with both underline and spell check prior to sending.
While testing I noticed that it underlined and spell checked everything except the "Subject" line.
Thunderbird will underline misspelled words in the "Subject" line but won't look for a correct word prior to sending as it does with the body of the email.
Are you aware of this and is a fix on the way?
Thanks so much
-v-

Absolutely NO themes or add-ons whatsoever on my system. I run the program "as is" when downloaded (v.24.4.0). I restarted in safe mode as a you suggested. I got the same results - no spell checking in the subject line. Spell check drops directly to the body of the email. Spell checked the body fine. Running WIndows 7. I have also uninstalled and reinstalled to see if that would correct the problem. It did not.

Viewing form in Preview Mode Failed. Error: Table not found [131-183]

Hi,
I have created a user form in screen painter in SBODemo. Created UDT, UDF & Registered UDO through my SDK code.
Everything works fine.
But when i run my addon on any other DB, and open my custom form it gives an error : Table Not Found.
I have checked the UDT's , UDF's & my UDO, all are in place and getting created in the DB.
I tried checking the Form again in screen painter everything is in line. But when i try preview in screen painter it gives an error
Viewing form in Preview Mode Failed. Error: Table not found [131-183].
I can't figure out the issue, i have checked my codes & forms many times.
Regards
John

hi john smith,
Check your screen painter, probably some fields are defined without the "@" character in front.
for fields, check the "U_".
nd.Q

Value not visible in preview mode

Hello there,
On my dashboard, between other things, I have a simple grid component which should just show some resulted values.
The problem I have is that when I connect the grid with the range of cells, everything looks fine but in preview mode, one line in the midle of the grid is showing "0.0" on all cells of the line and I do not understand why.
The version I have is 5.3.4.0 with build no: 12.3.4.1038
Any idea what to do?
Thank you,

Hi,
When you are connecting your grid component it only taking static data, but while preview it is taking data from your data source. So I guess there is a possibility that your resulting data set contains a blank row (check your data from data source).
try to create one more data grid with the same data set, but fetch populate the data into different location. See if it is still giving you the same problem.
let us know if you already tried this before.
Good Luck.

Captivate 8: Buttons not responding in preview mode

I've installed the trial version of Captivate 8.
At the moment none of the buttons are working in preview mode.
They do however work, when published.
I've checked my properties, and have my buttons checked to 'rest of the slide'.
Anybody come across the same problem, or have a solution for me?

Adobe released a patch for Chrome issue. Check this out.
http://blogs.adobe.com/captivate/2014/07/update-on-captivate-html-5-content-playback-issue -in-google-chrome-browser.html
Sreekanth

CS5: Spell Checking in Preview Mode?

Similar Messages

Maybe you are looking for