CS5 turned into CS5 Extended?

I am trying to download the trial software for photoshop cs5, however, when I click on TRY, it directs me to the download page for photoshop cs5 extended. I tried downloading that anyway, but it said in the installation that i need to download photoshop cs5 first. I've tried again and again to download the photoshop cs5 but it's always directing me to the extended version! This is really bugging me and I can't wait to get going with photoshop. Please can someone help!?

EXACTLY the same problem.. The forum says one reply answered an 2 helpful   ... where are they???
I now use LR 3 and PSE 9 but think I want up grade to full CS 5 ... Checked the NAPP site, says go to Adobe.com and click try under CS 5.
I did, got extended afte having a wrestling match with logging in.  The Akami thing seems to work and the download begins(1.4 G) but says PS 5 extended.  I DO NOT WANT TO TRY OR BUY EXTENDED.
Is this another Mac glitch???  I know the program works great on a Mac ... but trying to get it is a pain.
Called on the phone a couple of times ... Adobe makes more than an adequate sum but has absolutely lousy phone service ... no American except in the automated voice, then a 20 minute wait.
NO, I didn't stay on the line.  Not used to that and going to start now.
It is hard to understand why this is tolerated other than for the same reason most customer service is awful  ... they can get away with it ... just like the bullies in school.  Seems like the great NAPP folks (Kelby et al) could intervene on our behalf.  thank goodness it hasn't always been like this.

Similar Messages

  • How can I get the old CS3 pixel aspects into CS5

    Hello,
    i'm trying to get the old cs3 pixel aspect ratio into cs5. I don't need the hyper-correct- BBC 1.4587 for DV widescreen which leads to black bars left and right if I import HD footage into a SD widescreen timeline. Or if I export a HD timeline to Encore and downconvert to a SD PAL DVD - black bars...
    I have asked the adobe support, and they told me to change the Interpretation Rules.txt. But they have no further knowledge about these entries.
    For AfterEffect I found this solution: http://forums.adobe.com/message/3016005#3016005
    But I need it also for Premiere and Encore. Photoshop will be fine, but this is no must.
    What I Have tried so far:
    - changing the interpretation rules.txt from ... 768/702... to ..768/720  -> doesn't change anything
    - I copiued the whole interpretation rules.txt from Premiere CS3  -> doesn't change anything
    - I deleted the interpretatio rules.txt and reboot premiere -> doesn't change anything and premiere don't ask for the missing file.
    now I think that the interpretation rules.txt is not the right place to change the Pixel aspect ratio.
    can anybody help me? Is there a patch, which change all these settings in the whole cs5 production bundle...
    thanks a lot
    Johannes
    btw: sorry for my bad englisch

    Hi J-MS
    of course is PP interpreting my footage very well in terms of the cs5 PAR. but I want the PAR of CS3 becouse of the black bars left and right.
    One example step by step:
    - I render an AE Comp in 1920x1080
    - import that into premiere and create a HD timeline which fits perfectly to the footage
    - send this to Encore and create a PAL DVD
    ---> now you will find these ugly bars left and right
    the same if you put the 1920x1080 (that is truly 16/9) in a dv Pal widescreen timeline in premiere ( since CS4 with the PAR of 1.4587). right-click on scale to frame size. and again the black bars!
    For me, the old PAR 1.422 and 1.06 worked really fine and there for I try to get them back. and I know that I'm not the only one..

  • Photoshop CS5 or CS5.5 or CS5 Extended

    First I want to know that, what is the difference between CS5.5 and CS5 Extended ?
    Second Which is the latest one CS5 or CS5.5 or CS5.1 or CS5 Extended ?

    Actually, 12.0.4 and 12.1 are IDENTICAL in functionality but for the ability to license via subscription.
    The Photoshop delivered via the creative suite CS5.5 has various names.  Adobe's site calls it Photoshop CS5 sometimes, Photoshop CS5.1 sometimes, and people often call it Photoshop CS5.5.  Internally, as pointed out above it uses version 12.1 - except sometimes (such as in the registry we see 55.0!).
    I get the distinct feeling making a .5 release has been a bit of a discovery process for Adobe. 
    Now, to the second part of the question...
    The difference between the "Standard" and Extended editions exists across all the mentioned versions, and Extended as you might imagine has additional features.  You can read more about that here, which is a surprisingly difficult page to find on Adobe's site.
    http://www.adobe.com/special/products/photoshop/compare/
    -Noel

  • Copy-Paste From Other Apps (like PPT 2004) Into CS5 Broken ? -  OS 10.6.3

    Hi,
    New Mac, so to avoid problems went for the new post-Snow Leopard Photoshop CS5. Oops.
    Copy-Paste From Other Apps Into CS5
    Pasting images/photos from Powerpoint 2004 to CS5, I experienced the exact problem posted slightly off topic by james norrington in the thread "CS5 does not let me copy & paste file names."  It was not answered and is quoted here:
    ---"I am using CS5 Photoshop and Office 2004 on 10.6.3. I was using 10.4 until a few weeks ago and it worked and still works with other macs in the office using CS4. I can copy and paste from powerpoint but it cuts the pictures in half and does not know what the res. of the image is. Also when I go from photoshop to powerpoint the image res. is also not preserved."---
    Besides that, I also found copy-paste from a digital camera photo.jpg from Preview to CS5 doesn't respect the resolution either. Directly opening the photo into PS CS5, fine.
    From the earliest PS, always was able to copy any image to clipboard, have a new document dialog box come up pre-filled with correct original WxH pixels, original resolution, color mode, etc., and just paste into the new document - perfect fit (even the oddball PPT 576 ppi). Now a shift and cut-off.  Don't have PPT 2008 to test pasting from there.
    I have also found that a similar but less severe image cut off happens when copy-paste from PPT -> Preview, or -> TextEdit, or ->  drag and drop picture clipping.
    Opening Image File in CS5
    Even an original 300 dpi tiff file wrongly went to 72 ppi etc. when opened directly into CS5. Converted the file to a jpeg in Preview - that jpeg file could be opened into CS5 correctly, reconverted the jpeg to TIFF in Preview, still opened OK (not counting loss of image quality). Still couldn't copy paste from either document into CS5 correctly. One difference I noticed in the converted files was that more information was available in the Preview file info. Maybe that made the difference in opening the file correctly.
    I'd welcome any suggestions. Thanks.
    ---detail of tiff file ---
    original
         GENERAL
         Color Model: RGB
         Depth: 8
         DPI Height: 300
         DPI Width: 300
         Pixel Height: 1033
         Pixel Width: 1315
         TIFF
         Compression: LZW
         Photometric Interpretation: RGB
         Software: Image-Pro Plus
         Y Resolution: 300
    After conversion to jpeg in Preview"
    GENERAL
         Color Model: RGB
         Depth: 8
         DPI Height: 300
         DPI Width: 300
         Orientation: 1 (Normal)
         Pixel Height: 1033
         Pixel Width: 1315
    EXIF
         Pixel X Dimension: 1315
         Pixel Y Dimension: 1033
    TIFF
         Color Model: RGB
         Depth: 8
         DPI Height: 300
         DPI Width: 300
         Orientation: 1 (Normal)
         Pixel Height: 1033
         Pixel Width: 1315
    ----END---

    Thanks to Chris for the explanation of the dueling clipboards.
    It's still frustrating, but since I still have a CS2 license from the dead G4 the current Mac replaced, I can try that (wonder if they can coexist), or maybe I could use an older Mac for this particular situation.
    As for the .tif file, it was generated by a Mac OS 8.5 era image capture program that we are forced to use, and the analysis was that the app does not properly encode the TIFF tags to acceptable standards. Preview 5.0.2 just guessed right from the little information that was included - but it didn't work when tried with Preview 3.0.9 on an OS 10.4 Mac. So this was a unique situation.

  • How do you set up a TIME-LAPSE movie "before" putting into CS5 ??

    Is there a way to put together a time-lapse sequence shot with a DSLR (comprised of many stills) into a movie at 30fps, BEFORE putting it into the Adobe Premiere Pro CS5 timeline?
    QuickTime does NOT work because the images I need to use are TIFFs of much too high a quality for it to handle.  I know, I've tried.
    I know I can put the stills into CS5 as a series of shots lasting 1/30sec each to make a sequence, but that does not allow me to control the finished sequence "as a whole" for further altering like duration or other effects.  Otherwise, I would have to make alterartions one frame at a time, which is ridiculously time prohibitive and not precise.
    I'm using a Windows7 PC, and a Nikon D2X DSLR camera shooting in RAW.
    Any advise and help is greatly appreciated.
    Thanks.

    First of all, Pr won't import the RAW images, so you'll need to pre-process them and convert them to a more "standard" image file format, such as TIF or JPG. I think you already realize this, but thought I'd just mention it.
    When you want to import as a timelapse clip, check the "Numbered Stills" checkbox in the Import dialog, and select just the first image in the numbered sequence and click Open. This will create a clip using each image as a frame of the clip; you can select this clip, right-click, and select Modify > Interpret Footage to set the frame rate you like. There is also a check-option in the flyout menu of the Media Browser called "Import Numbered Stills as a Sequence" that does the same thing; just select that, import the first image, and the rest of the images will be imported as part of the clip.
    Once this is done, the images will act as one clip, so a single effect will affect all frames in the clip.

  • Photoshop CS6  transparent mask causing problems when saved as RGB Tiff and placed into CS5 Indesign

    Is anyone aware of a gray/black halo around feathered transparency objects. The halo occurs where the solid area of pic feathers to the transparent.
    NOTE: Image looks fine in Photoshop(CS6) but when placed as an RGB TIFF into Indesign (CS5) a black halo appears on page. See visual explanation below.
    This only happens when image is an RGB Tiff and layer mask is used to create transparency. If image is saved as .psd then it is fine. Also when RGB tiff is converted to CMYK then this is also ok.
    Is
    I look forward to anyone's suggestions.
    Ideally I could just start using psd format, but I have to handle alot of images that are already in RGB tiff and it is time consuming to have to open and re-save all of these.
    Adobe Photoshop CS5 RGB tiffs are still working fine.
    Thanks.
    Colourjam.
    (Pre-Press Production  Digital Image Operator)

    Yes the halo is does appear on the final PDF used for printing, and therefore does unfortunately print.
    Why would RGB Tiffs in Photoshop CS6 suddenly cause this to happen. If we revert back to placing Photoshop CS5 files into Indesign,  all is good.
    Also it is not just an isolated event as my colleague has the same thing happening on his workstation.
    Could it be that that Indesign 5  cannot colour manage the new CS6 RGB Tiff files? 
    CMYK tiff works well, as does PSD (CMYK and RGB)
    Also please note, that if you were trying to recreate this to see if you get the samed problem, the halo occurs as soon as you create transparency with a layer mask and feather the edge of mask, and then save as RGB tiff.  It will not be visible if you have a hard line or a vector edge.
    Just for the record here is our set up.
    Indesign CS5 (PC)
    Photoshop CS6 (PC)

  • How to Bring a Flash CS5 Animation into Fireworks CS5

    I am using a IMac with OSX 10.6.8. I am attempting to bring a Flash CS5 animation into Fireworks with individual frames
    and transparent background. I need some ideas here.
    thanks
    Paul

    Flash documents are not supported by Fireworks.

  • Can you open InDesign CS files into CS5?

    Hi all,
    My former company wishes to upgrade their ooooooooooold software to the latest version:) They currently have InDesign CS and want to make the leap to CS5. The question is...will it be possible to open their current CS files into CS5 once they make the switch? This is really important of course.
    Thank you very much in advance for your help:)
    Christine

    Did you try https://www.adobe.com/cfusion/tdrc/index.cfm?ref=sup&product=indesign?
    Anyhow, if it fails, it should be the latter, or something else busted; Creative Suite Trial Versions says:
    CS5.5 trials
    Creative Suite 5.5 product trials will be available for download soon.  Be notified when they are available. 
    Back to top
    CS5 trials for suites
    Trials of CS5 products are still available for download, below.

  • Will a Serial Number for Photoshop CS5 Work for CS5 Extended?

    Hello,
    I've recently subscribed to Photoshop CS5 and Dreamweaver CS5.5. In my Order History, it says 'Photoshop CS5', not 'Photoshop CS5 Extended'. However the download links in my Order History does not work (yes, I do have Adobe Download Assistant--in fact, I used it to download Dreamweaver CS5.5 without any problems).
    So, I decided to download the trial version instead and enter my serial number that way. However, the problem is that I see Photoshop CS5 on Adobe's Products page, yet when I click on it, it leads me to Photoshop CS5 Extended.
    I don't want to waste my time downloading CS5 Extended, only to find out that my serial number for CS5 does not work on it. So my question is: Will a Serial Number for Photoshop CS5 work for Photoshop CS5 Extended?
    Thank you for your time!
    -Mari

    Resolved!
    For anyone else having the same problem: I contacted Adobe via phone, and they said that a serial number for Photoshop CS5 will work with Photoshop CS5 Extended.

  • How to install CS5.5 into Macpro OS 10.8 Mountain Lion? anyone please help

    How to install CS5.5 into Macpro OS 10.8 Mountain Lion? anyone please help

    How to install CS5.5 into Macpro OS 10.8 Mountain Lion? anyone please help

  • I uploaded a AI CS5 file into a Cloud Folder with Plug-ins. But its empty in Adobe Ideas.

    I uploaded an AI CS5 file into a Cloud Folder with Plug-ins. But its empty in Adobe Ideas. I'd like to work on it with the touch version. Any ideas?

    The link should have worked, I just clicked on it and went to the correct forum. Anyway, in the top left you should see a breadcrumb trail like Adobe Forums > Adobe Creative Cloud > Discussions. Click on Adobe Forums and click on the drop-down labeled Select Forum. Type 'i' to reach the i choices and select Ideas.

  • Porting of CS4 Plugin into CS5 on Mac 10.6

    Hello All,
    I am new to Photoshop and I am trying to Port the CS4 Plugin into CS5. On Mac OS 10.5 it gets compiled properly without any major changes but the menus does not load into Photoshop menus. On Mac OS 10.6 I am facing the proplem comiling the code itself.
    Can any one help me on this. What wrong I am doing or have I missed anything. I also tried to compare my code with Outboud Sample project. There is no major difference. Still why is it not getting loaded?
    Thank you all in advance.
    Regards
    Farzana.

    What platform are you compiling to and what platform is your machine?
    Check your .r file and your PiPL resource and your configuration.
    Are the the CS5 SDK projects working when you run them on Photoshop CS5?
    You should have something like this in your PiPL resource.
    #ifdef __PIMac__
              #if (defined(__i386__))
                        CodeMacIntel32 { "PluginMain" },
                        /* If your plugin uses Objective-C, Cocoa, for UI it should not be
                           unloaded, this flag is valid for 32 bit plug-ins only and
                     should not be used in any windows section */
                        // off for now as this plug-in has no Objective-C Cocoa {},
              #endif
              #if (defined(__x86_64__))
                        CodeMacIntel64 { "PluginMain" },
              #endif
    #else
              #if defined(_WIN64)
                        CodeWin64X86 { "PluginMain" },
              #else
                        CodeWin32X86 { "PluginMain" },
              #endif
    #endif

  • Problem importing Premier Pro CS4 files into CS5

    I have loaded Premier Pro CS5 onto a spanking new 64 bit machine.  When I import a CS4 project file into CS5, it asks me to locate the raw video files but nothing else.  All titles with graphics in them are without the graphics. The text is OK.  The graphics have disappeared.  How do I import a project so the titles are complete and don't have to be rebuilt?  .

    Can you please give your system specs?
    In particular, how many physical HDD you have as well as memory. OS, CPU etc.
    Also - what are the scratch disc settings in Premiere?
    Finally - what is the video type - SD? HD?
    Please give as many details as possible as it sounds like your system is going into overdrive.

  • How do you bring Flash CS5 animation into Fireworks CS5

    Hello,
        I am trying to bring a Flash CS5 animation into Fireworks CS5 with transparent backgrounds.
    Anybody out familiar with how to achieve this.
      thanks,
      Paul

    Thanks for the reply Linda
    Paul Weiner
    Illustrator
    [email protected]
    tel/Fax:617-566-0277
    www.paulweiner.com
    http://www.pweiner.blogspot.com/

  • Error when importing file into CS5

    When I tried to import an Illustrator CS5 file into Flash CS5, I got an error from Windows saying that the program "stopped working" and it was searching for solutions to the problem. When it found no solutions, it said that it had to close the program. I've tried three times now and the same thing keeps happening. Has anyone else encountered this and, if so, do you know how to fix it? Please let me know. Thanks!
    *Pooja*

    Hi there,
    I can reproduce the crash. It's seems to be related to Importing all layers to Stage, and selecting the "Place objects at original position" option. All other combinations seem to not crash, so at least it helps isolate what's happening and provides an option for you to import your artwork and continue with your site. I will file a bug and send this to the correct folks for evaluation - I'm not too sure what the conflict is between the AI file and Flash (it's not due to not having AI installed).
    Thanks for posting it!

Maybe you are looking for