CS5 updates needed for offline/batch installation

I have a customer with CS5 installed on a PC that isn't connected to the Internet for security/policy reasons.
I would like to perform occassional Adobe software updates, once or twice a month, but I need to download all updates on a different computer and copy them to a thumb drive for installation on the CS5 PC.
Is there a place to download all of the updates or an easier way to download the individual updates?
-Rob

Look at the top of this page. There's a download link.
Bob

Similar Messages

Mac Premiere Pro CS5 update only for DVD installations?

Received notice that there is a patch or update for the newly released CS5 Premiere Pro for Mac. This does not appear within the app's check update menu option. Further, when the patch is located on Adobe's website, it indicates that it is for the DVD installation of PPro CS5 only. The version I work with was a download purchase, and no, it does not work with the available patch. The question is - anyone (Adobe?) know how the update is to be applied to download CS5 purchases, and why the difference anyway?

Not exactly. The patch applies to both DVD and downloaded installations. If you are getting the patch via Adobe.com, pick the one for electronic installations - it's there. We had a change to our installers this cycle and will require separate patches for DVD vs. downloaded installations for the time being.
If you are running Premiere Pro CS5 that was downloaded from the site, it does not include the patched code. We never make changes to the electronic versions of the code on Adobe.com - no matter when you download CS5, it's the same as the application that's on the DVD.
If you are updating via AUM, it will know which patch to install.
Sheri

What do I need for a clean installation

Recently I bought the T61p Thinkpad along with the preinstalled Vista Ultimate. I'm most satisfied about the system and its performance. However due to heavy(read crappy) preinstalled software the performance is wors than my other almost 8 years old laptop. Therefor I want to do a clean installation of the system software. My question is, what do I need when it comes to my OS when I decide to choose one partition and do a full format of my hd. I have read several online tutorials on this issue but there's no info on what you need for this other than "a Vista CD" Does this mean I have to buy a new 'retail Vista Windows' or an 'OEM Vista Windows'(from Lenovo or any other shop?) or can I use the discs that came with the system listed beneath? And do I need to make a copy of all preinstalled progams and drivers or are they on the 8 discs?
What do I have already: Along with the Thinkpad there came 8 discs:
- 'Rescue and Recovery CD'
- 'Supplemental Product Recovery CD for type 6480,.....,.....etc.'
- '6x 'Product Recovery CD for ThinkPad T61,R61 Type 6480,.....,......etc'
Furthermore I've read something on this forum about the Intel turbomem and its NV cache??? Is this something to take in consideration when doing a clean install?
Thanks in advance!
Che

Hi, I post this in the other message and it may help you. Here is the steps for clean install for T61p (without Turbo memory):
1. Install you own Vista (you don't need to backup the original, Lenovo Thinkpad has the backup)
2. Install your firewall if you have one;
3. Plug in internet cable and download "automatic system update from Lenovo- system update
3.13" (here is the link: http://www-307.ibm.com/pc/support/site.wss/TVSU-UPDATE.html#hp) and install it. (The system update software can download all the drivers for you)
4. Before run the System update, adjust internet setting (internet option-->connection-->Lan setup-->disable automatic search (the first one)), otherwise the software'll be interrupted in the middle.
5. Run system update and download the drivers and softwares you need.
6. Download and install Video card driver: Either FM570 from Lenovo (for 3D work) or 8600GT(for gaming). (I just installed FM570 from Lenovo website cause I am using it for CAD as well)
Then........................
Tips for speed up the Vista (dramaticly~~!):
Control Panel-->System-->Advance system setup-->Advance-->Performence
-->>Advance-->virtual memory (change)-->Choose no page files
The reason for this is that HD almost does the most hard work in the latop and virtual memory will increase the most work load for it. Since we have 4GB ram, we don't need virtual memory and relase HD's load.

Time Machine Backup [Update Needed] for User

So I made a time machine backup of my MacBook Pro to put on my MacBook Air, and when I did it created 2 users. One says Administrator (my normal one) and the other says [Update Needed]
However, when I log on to the [Update Needed] user, everything is the exact same. I just cant figure out what update it's referring to. When I go to system preferences > Users/Groups, only the Admin user is listed there.
Any ideas on how to fix?

dgordon412 wrote:
(80 GB, had only 200 MB free)
That's likely corrupted your system. You should have a minimum of 10% - 15% free at all times. That's almost certainly why it wouldn't restart.
even though i just erased everything, and 74.2 GB show as free.
There must be something else on the drive; if you erase it, it should have just under 80 GB free. Is there another partition?
Did you erase with a Leopard Install disc or a Snow Leopard disc? If you used a Leopard disc, that might explain showing only 74.2 GB free (it counts differently).
If so, use your +Snow Leopard+ install disc to do a complete reformat, and try to restore the backup. A Leopard disc cannot restore a Snow Leopard backup. Even the Snow Leopard disc may not work, as it's just too full and/or your system was damaged by getting too full.
All my previous backups seem to fit fine, but apparently the last time Time Machine backed up more from my disk than can fit on my disk! It seems having a hard disk close to full is enough to render a backup effectively useless.
Having an OSX drive that full will make your Mac extremely sluggish, cause data corruption and/or loss, apps to crash, etc.
Guess I'll have to restore from a previous backup, then manually copy the newer files. Just wanted to alert others to this insane problem, so it doesn't happen to them.
If you can get your Mac running, you need to make several GBs of space immediately.
If all else fails, reformat the internal HD and install OSX from your Snow Leopard Install disc, then use +Setup Assistant+ after the Welcome video to transfer +*most, but not all+* of your stuff from the backup. Omit the contents of one or more large sub-folders in a home folder (such as Photos, Music, or Movies).
See #19 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for details.

Raw updates needed for CS5 and Elements 11?

I have several adobe products. I want to install the latest raw updates for CS5 Photoshop and Elements 11. The app. manager tells me I have the latest updates. My CS6 product updated the newest raw product but not my others. I would like to get phone support for these issues - is there a phone number that connects to real people? The %^*()^ support section on the web takes me around in circles - very frustrating. Any help out there?

the good old argument is at what point do you stop supporting stuff? Elements is now up to 13.
I assume Adobe would argue you have cc already why are you still using cs5?
As I read it, the new 8.7 raw is only good for cs6 and above. They won't make 2 versions of raw, so I assume you are still on 7.4 for cs5?
On that basis, alas stick with your cs6 to do the newer stuff you need.
that all said, a bit of manual tweaking seems to work for some people. - Camera Raw 8.1 and PSE 11 - Elements Village

Email verification page down and Blackberry identity update needed for app world

Hey!
don't know if anyone can help me, but I just got a Blackberry and did the whole creating a Blackberry id etc, now when I want to confirm my email address it says that the email confirmation feature is currently unavailable? Its been like that for 5 days now! And that sucks seeing as the link is only valid for 24 hours? wtf? How am I supposed to confirm in 24 hours if the link is down for more than that?!!!!!!
So as a result I cannot use app world as every time I go on it says 'a blackberry identity update is needed. Would you like to install now?' I then click yes and it then proceeds to tell me that my 'blackberry identity installation failed. Please try again later (80003), I can try until I am blue in the face without the admin fixing that **bleep** link its never going to work!!!!!!!!!!
CAN ANYONE PLEASE SAVE THIS POOR DISTRESSED DAMSEL BEFORE I LAUNCHE THIS PHONE OUT OF THE WINDOW AND GO BUY A NOKIA?

Solution to the problem associated with the BlackBerry Identity installation failure can be found from the link below. A BlackBerry curve 8520 user can delete the existing bb app world and download another bb app world from this link:
http://www.bbh-plus.net/downloads.php?do=file&id=2198
Solution to the problem associated with the BlackBerry Identity installation failure can be found from the bb community forum link below. Thanks to JSanders (Hall of Famer III) Jan 26 2012.
http://supportforums.blackberry.com/t5/BlackBerry-App-World-General/BlackBerry-App-World-South-Afric...
I hereby, convey my profound gratitude to ⁠JSanders (Hall of Famer III) Jan 26 2012. Best regards from Chazi.

Help needed for automatic batch creation for by-products(PP-PI)

Hi,
In the Goods Recpt tab in transaction COR1, we have a field for creating a batch manually for the header material. On clicking on create, a pop up is generated whch facilitates creation of batch for the header material.
At this point, if i go to the material list, I would like to see the same batch number ( same as header) written against the BY-Products.
Essentially, when i create a batch for the header material, it should also create a batch with the same number for the by-product and populate the same in the materials tab.
One important thing to note here is that when we click on create batch icon, the data is stored in a structure and the batch is actually created only when the process order is saved.
Please advise if this can be achived by some standard settings in SAP or do we need to change the standard code. If later is the case, please advise about the point where to insert the required code. I have found a user exit at the point where batch numbe is created manually.
Please advise.

As per SAP Batch definition Batch is the quantity or partial quantity of a certain material or product that has been produced according to the same recipe, and represents one homogenous, non- reproducible unit with unique specifications. So logically you cannot have same batch number for two materials.
If you want to find out the relation between batches of header material and by product that is produced during production, you can use Batch Information Cockpit.
To see batch details in Batch Cockpit (T-code: BMBC), You have activate Batch where used function in IMG using path : Batch management-->Batch Where used list --> make setting for batch where used list.
Regards,
Sachin

Client PC showing updates needed for declined updates

I have many, not sure how many client computers both server and client OS showing 'Needed Count' for updates that were 'Declined' and/or 'Not Applicable'. Anyone know how this happens and if it can be resolved. It would be greatly appreciated.
As the client obviously shows as not being up to date for reporting.
Thanks.

I have many, not sure how many client computers both server and client OS showing 'Needed Count' for updates that were 'Declined' and/or 'Not Applicable'.
Physically and Logically Impossible!
Declined updates show ZERO counts for all states.
"Not Applicable" and "Needed" are mutually exclusive states.
Perhaps you could describe in more detail what you are observing?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

SPAM Update needed for Upgrade Assistent

For updating a SAP System (IDES 4.7) I assume I need the Upgrade Assistant!? I installed the UA-Server and connected with a browser to the local Service (http://x.x.x.x:4239/ua/UaGUI.html). After a few steps in the phase "PREPARE", the assistand is running into the following error: "The SPAM Version 15 of your system is too low!!!". I downloaded the newest SPAM-Package and unpacked it. The resulting files are "CSR0120031469_0026199.ATT" and "CSR0120031469_0026199.PAT". I copied them to \usr\sap\trans\EPS\in but the error still appears...
Any hint how to get 'em working? Am I totally wrong with this solution?

Hi Thomas
I think for upgrading an IDES system you need to install it again. Anyway , this note 164244 says you can ask SAP for an upgrade if necessary.
Regards
Jose Luis Valverde

Pre-Intel OS X 10.4 update needed for iTunes sync

Can I update my pre-Intel PowerBook G4 running OS X 10.4.11 so that I can use a modern version of iTunes to sync old files? I'm using an iPad 4 now but don't want to lose old files (not all from iTunes). Mt. Lion requires Intel processors and not what else to try or if I'm stuck.

Hi, the highest you can go is 10.5.8 ore-Intel, & I don't think that'll help with your iPad.
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5

Help needed for BI post installation

Dear All,
I have installed a SAP BI server. I have been told by my BI team that I need to define source systems in it. Also, I learnt that there are some BI related basis activities.
Can anyone please list out those??
regards, Sean.

Hi,
In order to define source system in BW check the links below.
Connection between Source Systems and BW
http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Creating SAP Source Systems
http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
BW connectivity(.doc)
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
For post installation activities check the link below.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=bwpostinstallation+&adv=false&sortby=cm_rnd_rankvalue
Regards.

Help Needed For Oracle 11gR2 Installation

Hi All,
Recently I am trying to install oracle 11 g Release 2 on my System (Windows 7 , 32 Bit) . But it didn’t work. I completed up to Password management and click ok. Then it didn’t shown anything. Kindly tell me what was the problem of my installation ??????? And also I would like to know about how to check Oracle installed correctly .
Thanks in advance

Thank you Sir .
installActions2013-06-30_11-02-46PM
INFO:
INFO: Parsing command line arguments:
INFO:     Parameter "orahome" = D:\app\user\product\11.2.0\dbhome_2
INFO:     Parameter "orahnam" = OraDb11g_home1
INFO:     Parameter "instype" = typical
INFO:     Parameter "inscomp" = client,oraclenet,javavm,server,ano
INFO:     Parameter "insprtcl" = tcp,nmp
INFO:     Parameter "cfg" = local
INFO:     Parameter "authadp" = NO_VALUE
INFO:     Parameter "responsefile" = D:\app\user\product\11.2.0\dbhome_2\network\install\netca_typ.rsp
INFO:     Parameter "silent" = true
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: Profile configuration complete.
INFO: Oracle Net Listener Startup:
INFO:     Running Listener Control:
INFO:       D:\app\user\product\11.2.0\dbhome_2\bin\lsnrctl start LISTENER
INFO:     Listener Control complete.
INFO:     Setting Listener service to start automatically.
INFO:     Listener started successfully.
INFO: Listener configuration complete.
INFO: Default local naming configuration complete.
INFO: Oracle Net Services configuration successful. The exit code is 0
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO:
INFO:
INFO: Started Plugin named: Oracle Database Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Database Configuration Assistant'
INFO: Starting 'Oracle Database Configuration Assistant'
INFO: Executing DBCA
INFO: Command C:\Windows\system32\cmd /c call D:\app\user\product\11.2.0\dbhome_2\bin\dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid orcle -gdbName orcle -emConfiguration LOCAL -storageType FS -datafileDestination D:\app\user\oradata -datafileJarLocation D:\app\user\product\11.2.0\dbhome_2/assistants/dbca/templates -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema true -automaticMemoryManagement true -totalMemory 814 -maskPasswords false -oui_internal
INFO: ... GenericInternalPlugIn.handleProcess() entered.
INFO: ... GenericInternalPlugIn: getting configAssistantParmas.
INFO: ... GenericInternalPlugIn: checking secretArguments.
INFO: ... GenericInternalPlugIn: starting read loop.
INFO: Read: SYS_PASSWORD_PROMPT
INFO: Processing: SYS_PASSWORD_PROMPT for argument tag -sysPassword
INFO: Read: SYSTEM_PASSWORD_PROMPT
INFO: Processing: SYSTEM_PASSWORD_PROMPT for argument tag -systemPassword
INFO: Read: DBSNMP_PASSWORD_PROMPT
INFO: Processing: DBSNMP_PASSWORD_PROMPT for argument tag -dbsnmpPassword
INFO: Read: SYSMAN_PASSWORD_PROMPT
INFO: Processing: SYSMAN_PASSWORD_PROMPT for argument tag -sysmanPassword
INFO: End of argument passing to stdin
INFO: Completed Plugin named: Oracle Database Configuration Assistant
INFO:
INFO:
INFO: Started Plugin named: Oracle Configuration Manager Configuration
INFO: Found associated job
INFO: Starting 'Oracle Configuration Manager Configuration'
INFO: Starting 'Oracle Configuration Manager Configuration'
INFO: Completed Plugin named: Oracle Configuration Manager Configuration
INFO:
INFO:
INFO: ConfigClient.executeToolsInAggregate action performed
INFO: Exiting ConfigClient.executeToolsInAggregate method
INFO: Calling event ConfigToolsExecuted
INFO: Adding ExitStatus SUCCESS_MINUS_RECTOOL to the exit status set
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <setup>
INFO: Completed validating view at state <setup>
INFO: Validating state <setup>
WARNING: Validation disabled for the state setup
INFO: Completed validating state <setup>
INFO: Verifying route success
INFO: Get view named [FinishUI]
INFO: View for [FinishUI] is oracle.install.ivw.db.view.FinishUI@f23838
INFO: Initializing view <FinishUI> at state <finish>
INFO: Completed initializing view <FinishUI> at state <finish>
INFO: Displaying view <FinishUI> at state <finish>
INFO: Completed displaying view <FinishUI> at state <finish>
INFO: Loading view <FinishUI> at state <finish>
INFO: Install Succeeded: true
INFO: Config Tool Succeeded: true
INFO: Remote Install Succeeded: true
INFO: Completed loading view <FinishUI> at state <finish>
INFO: Localizing view <FinishUI> at state <finish>
INFO: Completed localizing view <FinishUI> at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state finish
INFO: FinishAction Actions.execute called
INFO: Completed executing action at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <finish>
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -2
INFO: Shutdown Oracle Database 11g Release 2 Installer

Can't update Need for Speed Most Wanted for PS3

I've been trying to update the game for a while now and the update keeps failing and it shows different error codes every time like 80710736, 80710723, 800233EF. I've tried changing the DNS settings, DMZ settings and even disabled the Media Server but it still doesn't work. What should I do know?

OK VTMR....i had the same problem and i got it to update this is what you need to do.. -Create a new user-then go in the game-start the update-leave your ps3 and wait ( just note that it wil say approx +- more than a 1000 min remaining but it will go down and you mite want to do it early morning or so as for this is a big game unless you have a realy fast internet LINE...) HOPE IT WORKS LET ME>!>!>!> KNOW<!<!<!<

Firmware update needed for Nokia 5610 XM RM-279 (A...

The firmware version is 04.88.
Product Code is 0563576.
- The phone shuts down in silent mode, date and time are lost.
- The phone hangs sometimes while receiving a call and the keypad is locked. Battery removal is needed in this case.
Any update to the firmaware would be appreciated.

depends on your region/operator, noone can answer this question for you. you will just have to wait for it to come out.

Joshua-H61-uATX - Bios Update needed for CPU Upgarde - Sandy to Ivy? (HP P6-2260EA)

Hello, I have a Joshua-H61-uATX Motherboard. (It's an HP P6-2260ea PC)
I'm thinking of Upgrading my i3 2120 to a i5 3470 (Sandy-Bridge to Ivy-Bridge)
I know my motherboard supports it, but will I need a BIOS Update
I can not find a BIOS update ANYWHERE.
Thanks.
Also, Bios Version is: AMI 7.11 28/04/2012
This question was solved.
View Solution.

You don't need a BIOS update.
When it is stated that a CPU is supported in the motherboard specifications document it means that BIOS support is already present.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

CS5 updates needed for offline/batch installation

Similar Messages

Maybe you are looking for