CS5 v.15.0.2 Font issues. Need some help.

So after installing the newest version of Illustrator (15.0.2) I started to notice that I was unable to scroll through the fonts. I'd type the text out, then scroll through the list to find one that fit the design, but illustrator would skip to the fonts at the end of the list, the ones after the dividing line. When I try this same action in Photoshop it works fine, displays all the fonts doesn't skip.
First I tried removing the offending fonts, by scrooling through the list and keeping an eye out for the skip, then going into the font folder and removing the offending font. This method has worked great, up until now. Illustrator has found a font that isn't in the font folder. I downloaded a font managment program called Nexus Font this program works well and all but it can't find this font either. I've done a search for the font and have come up empty handed.
What is my next move? Is this a common issue? How can Illustrator find a font that isn't in the font folder?
Illustrator SC5 v.15.0.2
Windows XP

Two things - One, turn off "Enable Missing Glyph Protection" under your type preferences and second, clean your font caches.
It's pretty common for both issues to come up if you're in the habit of installing fonts you find on the web.  99% of the time, you're fine though.  The lack of scrolling is usually a bad font, and Illustrator's refusal to get over it is the corrupt font cache.

Similar Messages

  • Tseng - Font Issues need your help

    Tseng, I am calling upon your knowledge of font issues. I read some previous threads regarding font issues relating to a validation error of the follow:
    'FOND' Font Association usability
    I am attempting to install the Frutiger font which is, according to OS X ver. 10.5.6, a Post Script Type 1 Outline font.
    I understand that Leopard has some issues dealing with bitmap-only type fonts, however if this is recognized as a Post Script Type 1 Outline font then where lies the issue?
    Also, even stranger, is that despite the errors from validating the font in fontbook, the font works on almost every computer in my office except one... how strange is that. PS. I also did all software updates just to be sure.
    If you have any suggestions or information I would be ever so thankful!

    Yes they are all present.
    I compared my computer (where the font works) to the computer that the font doesn't work and the files are the exact same.
    It is an odd situation.
    Even on my computer where the fonts work, if I go into Font Book and validate the font it still shows errors, but it works.

  • CRM - IPC issues - need some help desperately -Thank you

    Issue: Create Quotation with a product results in a error: "no connection could be made to IPC".
    Also, choosing 'Conditions' Tab results gray/empty tab with "Pricing doc. does not exist" message in the status bar.
    Landscape:  Single host Win2k, CRM 4.0 sp03 IDES with IPC SP08.  No issues on CRM side other than the above mentioned.  So far we did:
    1) Installed IPC. 
    'dispatcher.properties' file contents:
    rfcEnabled=true
    rfcDispatcherProgId=IPC_RFC_DISPATCHER
    rfcServerCount=1
    rfcServerProgIdPrefix=IPC_RFC_SERVER_
    rfcGateways=ALPHA:sapgw00
    <end>
    2) Added "ipcuser" and gave system roles according to note:412309
    3) Maintained RFC settings for IPC_RFC_DISPATCHER and IPC_RFC_SERVER_1.  Both as (host:alpha), (Gateway:sapgw00)
    Started IPC dispatcher, server.  IPC logs look good. 
    ~ IPC Admin utility was able to login with "ipcuser" and client 800. 
    ~ monitor pulls up server on port 9163.  Test create document works fine and IPC reports Operational.
    4) RFC Testing (SM59) connections
            IPC_RFC_DISPATCHER  and  IPC_RFC_SERVER_1  tested ok and reported time.
    >>>>  However, using (SE37)
    5) IPC_COM_SESSION_BEGIN executes to a error screen of:
    Test for function group  |   COM_SCE_SV
    Function module              |  COM_IPC_SESSION_BEGIN
    Runtime:       | 2.262.764 Microseconds
    Exception:     | DISPATCHER_SYSTEM_ERROR  <<<<<
    Import Parameters |      Value
      |     -
    IV_CLIENT           |    800
    IV_USER_NAME         |   IPCUSER
    IV_USER_LOCATION |       ANYTEXT
    IV_SESSION_TYPE       |      CRM
    IV_NULL                |     *
    IV_MODULE           |    IPC
    Export Parameters    |   Value
        |   -
    EV_DESTINATION          
    EV_HOST
    EV_PORT  |               00000
    EV_SESSION_ID     
    EV_SESSION_ID_IPC
    EV_RFC_SCENARIO   |      RFC
    So, digging further,
    6) IPC_COM_SHOW_SERVERS executes to a error:
    ET_DISPATCHER_LIST : 2 Entries   <<<<<
    <details>
    IPC_V_RFC_DISPATCHER - communication failure   <<<<<<
                           hostname 'iwyf7yta' unknown / CPIC-C error CM_PARAMETER_ERROR.
    Here are my questions:
    a)  Do you find anything wrong with my configuration?
    b)  why is the need for IPC_V_RFC_DISPATCHER?
    C)  Does this mean that I need to run more dispatchers and servers??
        (i.e. each for IPC_RFC_DISPATCHER/server, IPC_V_RFC_DISPATCHER/server and IPC_WOV_RFC_DISPATCHER/server) - because these destinations are defined in RFC DESTINATIONS under TCP/IP connections... and they don't have program ids registered... so their test connections fail...
    and more importantly, am I even on the right track in solving my pricing issue???
    Any help would be greatly appreciated.

    John,
    The configuration you have done is correct as per the IPC documentation. But the RFC destination to be used for IPC connection is defined in the table COMM_IPC_DEST field DEST_OUT. When you run the IPC test with the FM COM_IPC_SESSION_BEGIN, this destination is used to connect to the IPC dispatcher. BTB while you do not need more than one dispatcher you may choose to run more than one server.
    There are more than one ways to resolve this problem.
    The simplest is to maintain the RFC destination IPC_V_RFC_DISPATCHER with the program ID (in this case IPC_RFC_DISPATCHER) configured in your IPC's dispatcher.properties file.
    Once the IPC connectivity is established your pricing problems should get resolved. Let me know if it works.

  • Need some help with downloading PDF's from the net.

    need some help with downloading PDF's from the net.  Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen?  any suggestions?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Need some help with the Select query.

    Need some help with the Select query.
    I had created a Z table with the following fields :
    ZADS :
    MANDT
    VKORG
    ABGRU.
    I had written a select query as below :
    select single vkorg abgru from ZADS into it_rej.
    IT_REJ is a Work area:
    DATA : BEGIN OF IT_REJ,
            VKORG TYPE VBAK-VKORG,
            ABGRU TYPE VBAP-ABGRU,
           END OF IT_REJ.
    This is causing performance issue. They are asking me to include the where condition for this select query.
    What should be my select query here?
    Please suggest....
    Any suggestion will be apprecaiated!
    Regards,
    Developer

    Hello Everybody!
    Thank you for all your response!
    I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
    I had created a Z table with the following fields :
    ZADS :
    MANDT
    VKORG
    ABGRU.
    I had written a select query as below :
    I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table 
    select vkorg abgru from ZADS into it_rej.
    Earlier :
    IT_REJ is a Work area:
    DATA : BEGIN OF IT_REJ,
    VKORG TYPE VBAK-VKORG,
    ABGRU TYPE VBAP-ABGRU,
    END OF IT_REJ.
    Now :
    DATA : BEGIN OF IT_REJ occurs 0,
    VKORG TYPE VBAK-VKORG,
    ABGRU TYPE VBAP-ABGRU,
    END OF IT_REJ.
    I guess this will fix the issue correct?
    PLease suggest!
    Regards,
    Developer.

  • We have a set of oracle clients running on T5220 zones that need some help

    Greetings all -
    We have a set of oracle clients running on T5220 zones that need some help.
    If, for example, I execute the query "select (all) from dba_objects", trace output reports 90% of the elapsed time spent under "SQLNet message from client".
    Here are OS details for the clients: Solaris 10 5/08 s10s_u5wos_10 SPARC
    Running "uname -a" from the client gives:
    (SunOS bmc-ste-app 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220)
    Here are OS details for the dataserver: Enterprise Linux Enterprise Linux Server release 5.2
    Running "uname -a" from the dataserver gives:
    (2.6.18-92.1.6.0.2.el5 #1 SMP Thu Jun 26 17:44:55 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux)
    The RDBMS is 10.2.0.4
    Again, please note, there is no application in the picture here. We are just running a simple catalog query (select * from dba_objects) from sqlplus. Why the wait on something like this? The wait also occurs when a different query is used (select (all) from SYS.COL$ where rownum < 50000). And it doesn't matter if I used the full client or the instant client. I still get the same high-wait.
    We had thought - maybe this is a network thing - so we put a test client on the same subnet as the dataserver. This helped - but not enough. The wait is still way too high even with firewalls taken out of the equation.
    We've also looked at arraysize, SDU, kernel settings. And we've spent time going over tkprof, truss and sqlnet-tracing.
    Has anyone ever had to solve this HIGH WAIT ON CLIENT issue? Is there a work around or some tweak I'm missing.
    Is anyone configured like we are (linux dataserver, solaris clients)? If so - did you see anything like this?
    tia -
    Jim
    Edited by: jim1768 on Mar 31, 2010 1:47 PM
    Edited by: jim1768 on Mar 31, 2010 2:12 PM
    Edited by: jim1768 on Mar 31, 2010 2:13 PM

    Hello,
    We have the exact same issue. Did you ever solve this issue? We have a t5220 and have just upgraded our 11.5.10.2 11i system on it from 9.2.0.8 32-bit sparc to 11.2.0.1 64-bit sparc. Things should be faster but arent, and our consultant has tracked it down to high wait times when the apps tier using forms connects to the database tier on the same box. So even though the t5220 is both server and client, there is something about the client sql connection.through TNS that his having trouble. Thanks for any information. We've also created an S/R with Oracle.
    Note: I am well aware of the other issues with the CMT server series but this particular issue seems independent of the regular / known issues and remains a mystery to us. Other known issues with the CMT servers for SPARC:
    Metalink Note 781763.1 (Migration from fast single threaded CPU machine to CMT UltraSPARC T1 & T2)
    http://blogs.sun.com/glennf/resource/Optimizing_Oracle_CMT_v1.pdf
    http://blogs.sun.com/glennf/tags/throughput
    http://blogs.sun.com/glennf/entry/getting_past_go_with_sparc
    http://www.oracle.com/apps_benchmark/doc/E-Bus-11i-PAY_ORA_SUN-T5220.pdf (this paper has some oracle init settings at the end. The kernel settings have been included in the OS upgrade)
    http://blogs.sun.com/mandalika/entry/siebel_on_sun_cmt_hardware

  • Need to try to find Pi, need some help

    I have need to try to find some of the values of Pi,
    but when i try math.PI i only get down to like 8 decimals.
    I need some help.
    Not sure were to start either!
    Message was edited by:
    Aten

    You're just adding terms together. There's a series of them, so you need a loop. Each pass through the loop could add one more term. Note that each term has a denominator that is bigger by 2, and it's either added or subtracted (or to look at it another way, you're adding negatives alternately).
    The main issue is how accurate you want it to be. You can't add the digits together forever. So you have to choose a stopping point. You can stop based on a time period (when you've run out of time, stop adding new terms) or on precision (when two subsequent values are close enough to each other, stop).
    You'll probably want to use java.math.BigDecimal.
    If you give some more details about the assignment I can make some more suggestions.
    Why don't you give it a try and see how it works?

  • HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

    I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it. Update it to IOS 7.1.1

    Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it and still cannot be fixed. I updated it to IOS 7.1.1 recently only, does it have connection with the inconvenience I am experiencing right now? What should I do? Thanks!

    Hi Melomane1024,
    If you are still having issues with your iPhone’s speaker, you may want to look at the steps in this article -
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Need some help with: implement email notification on note board within a page layout (javascript)

    Dear all,
    I have a quite specific issue in which I'm in need of some guidance and help!
    Within our SharePoint I have created a custom page layout. This is a simple page to post some content (news) and a standard Note Board is implemented.
    Every time a news item is placed, this is done by our communication departement, this page with standard layout is placed as a page in a page library. When there are no comments on that particular item/subject I found a solution to replace the standard SharePoint_no_posts-text
    by placing a contenteditor web part in the Page Layout with a reference to a textfile with some javascript in it. This works perfectely.
    The only thing left is that I want to automatically send an email to the contact (which is defined when making the news item) everytime someone posts a new comment. Here is where I need some help!
    We don't really use mysites so I was wondering if someone could tell how I could do this by for example some code (javascript) which I can implement in the Page Layout.
    Can anyone help me?
    Thanks in advance,
    Gr Matt

    Try below code:
    function sendMail() {
    var link = 'mailto:?subject=insert subject line&body=';
    var curntLoc=window.location.href;
    link +=escape(curntLoc);
    window.location.href = link;
    // window.location.href = link;
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9cfe7884-fc9e-4c7c-a44c-f740d2edcafc/sending-email-using-javascript-in-sharepoint-2010
    Also check below:
    http://spjsblog.com/2010/06/16/send-email-with-javascript-with-the-help-of-a-workflow-in-a-dedicated-send-email-list/

  • Need some help with pictures

    Hi,
    I need some help to try to understand some of my issues; i'm creating a catalogue for a company and i'm uploading TIFFs pictures (600 of them). My problem is that this catalogue is both for print and web but is getting really heavy as a file, is there another way to convert all the pictures and maintain the quality for print and a reasonable size for web?
    I'm uploading TIFFs because i need the transparency and i can't upload as PNG...
    Can someone help me please.
    I really appreciate

    alanpires wrote:
    ...  this catalogue is both for print and web ...
    Choose either file size (for web) or image quality (for print). Something has to give.
    This "for web" business, is that still a PDF? Then export for print with full resolution, and export another version to put online where yo adjust the export settings for the web until image quality is worse than having a megabyte or two more.

  • Need some help with guitar setup...

    jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
    Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
    digitech gnx-3
    alesis sr-16
    sure mic's
    yamaha e203 keyboard
    here's the setup:
    yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
    here's the problem:
    everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
    by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
    any help would be greatly appreciated!

    anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

  • Need some help with my thunderbolt!!!!!!

    i was on it the night before. then at 4 am it goes to the HTC white screen and does nothing else but that. I have tried everything from rebooting to taking out my SD card. I need some help. Is there anyone out there?

        Everyone, I'm so upset to hear that your phones aren't powering on. I'm hoping your issues have been resolved by now, but if not, I want to try a few more steps. Since removing the battery and charging aren't working, I suggest first trying to boot your phone into safe mode http://bit.ly/Nt3m5U. If no change, please try these steps. No information will be lost:
    1. Boot into recovery
    o Press and hold Power, Choose "Restart" option
    o When screen turns off, press and hold Volume Down and Power
    2. When the white HBOOT screen appears, use the volume button to move down to “RECOVERY.”
    3. Press the Power button to select “RECOVERY.”
    4. When the triangle and exclamation appears, hold the Volume Up and Power button at the same time.
    5. Using the volume button, scroll down to “Wipe cache partition” and select it.
    6. Select "Reboot system now"
    Let me know if you still need assistance.
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • Need some help with Xcode

    I'm new to xcode and need some help.
    i have written app and it easily launches etc.
    but when i add background image to the ui app doesnt launch even though it says that there are no issues.
    it highlights these lines in green and says:"thread 1 programm received signal:"SIGABRT"":
        return NSApplicationMain(argc,  (const char **) argv);

    I figured out how to solve our problem. I was using a Web View, and I had to add the Webkit.framework to my project to fix it.
    I am not sure what framework if for images...sorry...
    If you can find the framework, just add it to fix the problem...
    Hope I helped!
    Thanks,
    Adam B

  • Need some help with region position

    Hi,
    I need som help with regions position....
    Background:
    I have 2 regions, I will call them reg1, reg2 and reg3.
    reg1 = Page Template Body (2. items below region content), column 1, search region.
    reg2 = Page Template Body (2. items below region content), column 2, import file region.
    reg3 = Page Template Body (3. items above region content), column 1, search result, grid region, very wide.
    Issue with the position, the setup explained makes my layout like this
    reg1--------------------------------reg2
    ------------------reg3--------------------
    What I want:
    reg1-reg2
    ------------------reg3--------------------
    What am I doing wrong?
    Regards Daniel

    Daniel,
    this will also work:
    Region1 HTML table cell attributes
    width="10%"
    Region2 HTML table cell attributes
    align="left"
    without touching the page template.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • My iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

    my iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

    If you take a screenshot (Press the home button and Lock button at the same time), does it appear on the screenshot? Zoom in on the screenshot and see if it's still there.
    If not, then your display is failing. I would recommend taking it to an Apple Store if you can, if you can't then to an authorised Apple reseller.
    If it does appear on the screenshot when you zoom into the spot, then it's a really weird software issue! You might have to backup and restore the device.
    Let me know!
    xeni

Maybe you are looking for