Cs5 vs cs3 camera raw , with cs5 i can open @ 32bit ,cs3 @ 16bit

H
i did notice that in cs5 camera raw i can open the same raw file @ 32bit but in cs3 @16
i talking about the same image
is there something wrong in the cs3 installation ?
i did remember cs3 is able to open raw file (like 5d mark2) in 32bit
thanks

The first thing I would suggest is, in Photoshop, go to Help/About Plug-Ins and click on Camera Raw to verify what version is installed. There should only be one version listed, and listed only once. If there are more, then you need to get rid of the extras.
The DNG converter is a program that will create DNG (digital negative) copies of your raw images. It takes all of the raw image data and copies it to a new file format. The raw data is unmodified, and the DNG file is a standardized and open documented file format. But the DNG converter will not list the actual files. You choose the folder that contains your original raw images, and then the converter will put the copies wherever you choose to put them. But if your camera is supposed to be supported by the latest version of Camera Raw, I don't know if converting will solve the problem. It won't hurt anything; your raw files are still intact.
It would be helpful if you could describe your computer; operating system, how much RAM, a little information to allow the experts (of which I am NOT one) to help you isolate and solve this problem.

Similar Messages

  • How to get Adobe Camera RAW loaded so I can open RAW files from a Panasonic LX7?

    I opened these images two days ago. Now I get a message that the CS6 Photoshop does not recognize this type of file. I went online and again(3rd time)downloaded Camera RAW 7.3 and tried installing and opening the images.
    Once again - same thing.
    Now I have something called a DNG converter on the machine and I don't know what it is.
    I opened it and tried to get to the LX7 files in my computer I can see in Bridge - and the DNG converter does not show the files at all.
    I was doing just fine with CS5 - then I bought this piece of crap because I could not get an update for CS5 to open the Panasonic Lumix LX7 images. So, I wasted $200 on CX6 only to find I can't get my images opened.
    I hate photoshop more every damn day
    First, took three days and over 9 hours wasted on hold for Adobe phone help - and finally got a guy on to help me register Photoshop CS6 - and he could not get it to register. Finally after a day & a half and hours of continually cutting and pasting from teh online computer to the main computer that does not hook up to the Internet I got CS6 to work.
    Then, I opened the Panasonic LX7 RAW images twice after downloading and installing Adobe Camera RAW 7.1 and 7.3 - and now the machine does not recognize the files and tells me to go to http://www.adobe.com/go/kb407111
    I went there and have downloaded the Camera Raw 7.1 and 7.3 four different times now and tried installing it - and Still can't open the damn files. I keep getting the same "photoshop cannot open this file" message and teh same referenc to teh above.
    How can I get this piece of Shiz to work???
    Oh - the name for ID above is after 22 minutes of trynig to find an name this program would accept.

    The first thing I would suggest is, in Photoshop, go to Help/About Plug-Ins and click on Camera Raw to verify what version is installed. There should only be one version listed, and listed only once. If there are more, then you need to get rid of the extras.
    The DNG converter is a program that will create DNG (digital negative) copies of your raw images. It takes all of the raw image data and copies it to a new file format. The raw data is unmodified, and the DNG file is a standardized and open documented file format. But the DNG converter will not list the actual files. You choose the folder that contains your original raw images, and then the converter will put the copies wherever you choose to put them. But if your camera is supposed to be supported by the latest version of Camera Raw, I don't know if converting will solve the problem. It won't hurt anything; your raw files are still intact.
    It would be helpful if you could describe your computer; operating system, how much RAM, a little information to allow the experts (of which I am NOT one) to help you isolate and solve this problem.

  • I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

    I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

    cr is installed by updating your app.  use help>update, or update manually
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2104 updates:  http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

  • HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible -  this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

    HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible -  this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

    You need to buy PSE13. But you can continue with PSE9 if you download and install the free DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will work with yoir existing software(keep your originals as backups and for use in the camera manufactures software)
    Windows download (.exe file) click here DNG Converter 8.8
    Mac download (.dmg file) click here DNG Converter 8.8
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Why don't changes made in camera raw with the adjustment brush carry into photoshop?

    Why don't changes made in camera raw with the adjustment brush carry into photoshop?

    Using the Open button in ACR to get to PS doesn’t create a PSD or a TIF, it just transfers the image in memory. 
    As has been asked, already, what are the precise steps of your workflow starting with your painting the adjustment brush strokes in ACR and seeing the image in PS without the strokes, and what exact versions of PS and ACR are you using? 
    Use Help / About Photoshop..., and Help / About Plug-ins... / Camera Raw...

  • Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III  files. SNo support or upgrade availab

    Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III  files. SNo support or upgrade available on the site but 6.7 upgrade.!Please advise

    http://labs.adobe.com/technologies/cameraraw7-1/

  • When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG

    When using Camera RAW after editing photo I can only save file as DNG, I want to save as JPEG. HOW??
    THANKS LLOYD

    BARBARA,Yes, you are so right, I was deceived by the eve button,  Just tried it and it WORKS GREAT-Thanks for the help.
    THANKS AGAIN AND HAVE A GOOD DAY Lloyd
          From: Barbara B. <[email protected]>
    To: Lloyd Bennett <[email protected]>
    Sent: Tuesday, January 13, 2015 11:46 AM
    Subject:  When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
    When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
    created by Barbara B. in Photoshop Elements - View the full discussionYou are being deceived by the Save button, like most people. That button is not the Save As button, really, but a link to the DNG converter. To save your raw file in an image format, click the Open button instead and then save in the format of your choice in the editor. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7092207#7092207 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7092207#7092207 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • CS6 Camera Raw 7.4 "will not open" compatible D800 NEF Raw files (Win7)

    CS6 camera raw 7.4 "will not open" the compatible D800 NEF Raw files (Win7). D300 NEF files open OK.
    I seem to remember seeing an article that stated i would have to uninstall and re-install CS6 Photoshop completely and re-install again. However I cannot find this article now.
    If the above is true, having PS version CS4 with update CS5 & 6 installed, would i have to remove all PS versions.
    Photoshop error message just states download latetest software version, which i have done with ACR 7.4. I have also tried ACR 8 which did open file either.
    Also when ACR8 is hosted by Photoshop CS6, it does not offer any of  the new features described in Photoshop CC marketing materials for ACR8 (Re: DPReview mag) so i returned to 7.4
    Adobe DNG runs OK but i would rather deal with the original file in ACR rather than adding an additional step with more files to keep track of.
    Is there a way of uninstalling all versions of ACR, cleaning system and re-installing ACR, assuming the fault lies with ACR?
    Anyone have any answers?
    Malc

    Half an hour after posting this query (in the wrong forum) I resolved the issue. The fault lies with Nikon Transfer.
    Nikon Transfer corrupts the D800 NEF files. Apparently Nikon Transfer is well known for causing errors.
    Drag & dropping the files direct from the memory card onto your hard drive and everything works fine.

  • Camera raw 7.4 will not open the D800 NEF Raw files. D300 NEF files open OK

    Camera raw 7.4  will not open the compatible D800 NEF Raw files (Win7). D300 NEF files open OK.
    I seem to remember seeing an article that stated i would have to uninstall and re-install CS6 Photoshop completely and re-install again. However I cannot find this article now.
    If the above is true, having PS version CS4 with update CS5 & 6 installed, would i have to remove all PS versions.
    Photoshop error message just states download latetest software version, which i have done with ACR 7.4 nd ACR 8 which did not open file either.
    Adobe DNG runs OK but i would rather deal with the original file in ACR rather than adding an additional step with more files to keep track of.
    Is there a way of uninstalling all versions of ACR, cleaning system and re-installing ACR, assuming the fault lies with ACR?
    Anyone have any answers?
    Malc
    ANWER:-
    (Appologies for spelling errors but my keyboar hs just packed up). Now on  screen keyboard.
    Half an hour after posting this query (In the wrong forum -  Downloading, Installing, Setting Up) I resolved the issue. The fault lies with Nikon Transfer.
    Nikon Transfer corrupts the D800 NEF files. Apparently Nikon Transfer is well known for causing errors.
    Drag & dropping the files direct from the cameras memory card onto your hard drive and everything works fine.
    Nikon Transfer has now been assigned to the dust bin!

    Half an hour after posting this query (in the wrong forum) I resolved the issue. The fault lies with Nikon Transfer.
    Nikon Transfer corrupts the D800 NEF files. Apparently Nikon Transfer is well known for causing errors.
    Drag & dropping the files direct from the memory card onto your hard drive and everything works fine.

  • In camera raw how large should I open my raw file before converting it to a TIF file?

    in camera raw how large should I open my raw file before converting it to a TIF file---2736 x 3648 (10.0 MP), 3072x4096 (12.7 MP) or 3840x5120? (19.7 MP).  I want a sharp TIF file.   I'm shooting with an Olympus E-510, 10.0 MP camera?
    thanks - Ken
    [email protected]

    rasworth wrote:
    There is no advantage to saving or opening other than at the native resolution.
    Actually, not entirely true. In the case of Fuji DSLR's you would do better to double the rez in Camera Raw as that matches the interpolation that the Fuji software does in their higher quoted "effective resolutions"(it ain't real resolution mind you but it can benefit certain image types).
    If you know for an absolute fact you need more resolution than the native file has, you really might want to test upsampling in Camera Raw as it has a newly tuned upsample (put in in ACR 5.2) that is an adaptive Bicubic algorithm that is either the normal Bicubic or Bicubic Smoother depending on the size–and that's something even Photoshop can't do.
    But in general unless you know for a fact you need the image bigger (or have a Fuji camera) processing at the file's native size is the most efficient.

  • CS6 - Camera Raw 7.1 won't open Nikon D7100 RAW files anymore

    I have a Toshiba laptop with Windows 7 installed on it.
    I use CS6 and a few days ago, I started having trouble when loading files (JPEG & RAW files via Camera Raw). If I loaded more than two or three files, it would crash Photoshop. I tried loading JPEG directly into Photoshop, and it would still crash after 2 minutes. I tried restarting PS, reset my settings to default, restart my PC, and still the problem persisted. I checked the RAM and scratch disks, etc, there was no change with it. I decided I would reinstalled CS6. I did and now Photoshop works perfectly. I can even load JPEG via Camera Raw and it works without crashing. But then, my RAW files won't load via Camera Raw. I have the latest one from what I saw on Adobe's website  - Version 7.1.0.354. Others listed are DNG converter but I don't need that.
    The RAW files I am trying to open are from a Nikon D7100 camera and before, those same files would open with Camera Raw 7.1.
    Can someone please help me out on this. I am a bit desesperate cause I urgently need to edit files on Camera Raw because all my settings are saved on this.
    When I open a raw file, this is the message I get:

    In any event, Kathleen, you should NOT be using that obsolete ACR 7.1 version.  Besides, the Nikon D7100 is not supported by that version, as you have already been correctly told.
    Update to ACR 8.6 for CS6 ASAP.
    Going through the Help menu in Photoshop CS6 (Help > Updates) will/should update you automatically.  If for some reason,the auto updater fails, here's the link to the ACR 8.6 manual install:
    Windows
    CameraRaw_8_6_Installer.zip 
    One should never be using anything but the latest version of Adobe Camera Raw (ACR).
    Even if you were using a camera supported by your obsolete version, you are leaving a lot of image quality on the table now.  The rendering of the more recent versions of ACR is demonstrably superior, starting with 7.4.
    It is a shame to be using a decent camera—even if it's not a top of the line Nikon—and be in effect trashing some of its image quality.  Really.

  • TS1292 When I scratched the code, the letters came off with. I can read two X, one Z, S, R, and N, the rest are illegible

    When I scratched the code the letters came off with. I can read two X, one Z, S, R, and N, the rest are illegible

    Try here  >   iTunes Store: Invalid, inactive, or illegible codes

  • Hi, sometimes big images could not open with photoshop.ı can open with windows but cant open photoshop.if ı try to open i am seeing a white image.is there any answer for this problem please.

    hi, sometimes big images could not open with photoshop.ı can open with windows but cant open photoshop.if ı try to open i am seeing a white image.is there any answer for this problem please.

    Just to assist those who might help you with this, please give the exact version of Photoshop CS6 you are running, for instance CS6 13.0.1.3.
    I had already asked for that in my previous post, but I guess you didn't quite know what I was referencing when I typed "exact version".
    Sorry, I cannot help you myself because I don't deal with that kind of 3D images, don't use Windows, and in all frankness I'm not quite following your last post.
    Also please give the exact model of your graphics card, so they can check whether it is on the list of cards tested by Adobe.
    Thank you.

  • Compatibility of Camera Raw with Photoshop CS5

    Just bought a new camera (Canon T3i).  Took a scandisk full of pics in "Camera Raw".  Tried to open in Photoshop and got messsage that "Camera Raw" from my camera is not compatible with Photoshop CS5.  What can I do??

    Download the most recent version of ACR which for CS5 is ACR 6.7. (which if you had mentioned your system I could have pointed you to the download). You'll just have to find it yourself in the Adobe Updates.

  • Camera Raw Update Problem: how to open Fuji X-E2 Raw files in CS5?

    I just purchased a Fuji Xe2 but my .RAF files are not compatible with my CS5's version of Camera Raw (6.7).  I have tried to go through the Help menu to update but it states my product is up to date. I tried to manually download and install but I just get an error message.  How do I fix this?

    Familiarize yourself with these two tables
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    The X-E2 was first supported by Camera Raw 8.3 which is only compatible with CS6, CC and later.
    It will never be backward compatible with earlier versions so you won't be able to open XE-2 Raw files in CS5.
    Some options:
    Upgrade to CS6
    Join the Cloud
    Download the free Adobe DNG converter, convert all X-E2 Raw files to DNGs then edit the DNGs in CS5.
    Camera raw, DNG | Adobe Photoshop CC

Maybe you are looking for