CS5 Win7 Networking Help Please

I'm a home-based designer who needs nework help. I have CS5 Master Collection on a Win7 (Home Prem) computer which is peer-to-peer networked with 2 other Win computers (98 & XP). Win Exporer has no problem navigating anywhere on the network from any computer. However, Bridge CS5 on the Win7 computer (i5 cpu, 2.7GHX, 8GB Ram) shows "Lock" icons on all network locations; hangs when any network location is selected. Also hangs when launched from within Photoshop, Illustrator, or InDesign. I've searched these forums and tried various fixes having to do with security, permissions, firewall rules, clearing caches, etc. No luck. Adobe Support won't help me as it doesn't cover "network issues" such as mine. Their enlightened suggestion was to "move the files you want to browse onto the computer where CS5 is installed." Any real suggestions from anyone would be greatly appreciated. I'm not a programmer but I can usually doink my way to understanding.

Steve— Thanks for your suggestion. I didn't think to remap shared network folders, duh. (And even after Win7 Explorer forced me to do it to become part of network!) Previous versions of Windows allowed me as "owner" (administrator) to see, read, and write out of the root directory and all the other hard drives installed on networked computers. Win7 apparently doesn't or discourages it, even on the older computers, it seems (at least for amateur net administrators like myself). From Win7 Explorer I can and did remap target directories on the remote drives located on my Win98 and Win XP computers. Unfortunately now BridgeCS5 (on my Win7 computer) shows these remapped icons with big red "X"s through them. But these remote directories can be browsed and files manipulated. I still can't get BridgeCS5 on the Win7 computer to open from within PS, AI, or ID. But MiniBridge now works from within PS. If you have suggestions for fixing this BridgeCS5 functionality in AI or ID I'd appreciate it. I'll revisit your knowledge base and forums for this info because I'm spoiled by the way BridegeCS3 works on my WinXP computer. Otherwise I'll find ways to use Bridge outside of AI, ID, and the rest. Thanks again for helping me to get MasterSuiteCS5 to more closely fit the way I work. —Phil Smeiles

Similar Messages

Problem with RAM and slowing of computer when using CS5 can anyone help please?

Hello I am having big problems at the moment with a slow computer when I am using Photoshop CS5 I am informed that I am low on memory. I do not store any photographs on my computer they are all on an external hard drive, the only image on the computer are the ones I am working with. I have been in touch with Norton who think it is an Adobe issue can anyone help please, looking forward to hearing from you and to a swift fix of the problem
Best wishes
Sheila

How much memory do you have installed, and what operating system are you running?
Mark

IMac to Win7 PC -- Help please!

Hello to all,
I have iTunes 11.0.1.12 (x64) on my iMac and iTunes 11.0.1.12 (x86) on my Win7 PC and i am trying to setup Home Sharing...the problem is that my Mac's iTunes can see the WinPC's Library, both in normal sharing and Home Sharing but the WinPC cant see the Library from my Mac!!
I have tried turing off the Win firewall, Mac firewall and rebooting both PC's but the problem remains the same, anybody help please????

At first,I'd express my pity.
And.Ummm
Unbelivable!
What we have met is exactly opposite!
I can see the Mac's library on Win7,but I can't see the Win7 PC's library on my Mac.
I've down all the things I can do,such as turning off the firewall, rebooting, etc , which made me mad!
I consider that maybe we could have a communication so that we can both solve our problem .

Exit Code: 7 on flash cs5 installation? help please??

Hello i'm having a bit of a problem with re-installing flash cs5, i used to have it but i factory setted my laptop cuse it was acting up for a while and including flash was cting up and not loading so now i got to install it and it is giving problems it says:
Exit Code: 7
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DS013, DW025 ... WARNING: DS013, DW025 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 62 error(s), 62 warning(s)
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: Adobe Player for Embedding x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: Shared Technology
do you think you could help me please? thank you so much!

Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Mylenium

Adobe Programs: Conflicts and Networking help please

I don't know if this is the proper place to post but this is what I'm looking for. Any suggestions, thoughts or help would greatly be appreciated.
We are researching the possibility of using an outside IT Consultant for our computers and Adobe Software. Our IS team (about 10 people), while very good with networking PCs, are not familiar with Adobe software and how they interact with the hardware/computers and networks.
We have been struggling for a few years to get our machines to be at their best performance and efficiency, especially on large tradeshow graphics. We have had crashes and glitches since CS3, but we understand that their are many variables and they are not just Adobe product issues.
We are a large company but have only 3 designers. So we are trying to find our own help and do some of our own research on a resolution.
We are looking for someone who is PC mainly, but if you have a recommendation for anyone that networks macs also that would be great. We are currently on PCs with hopes of someday moving to macs.
If anyone knows of any business or independent contractor in the North Central Florida area please let me know.

We contacted Adobe but they said they can only give over the phone help and will not refer us to anyone.

Routes, gateways, and networks -- Help Please

Hi Linux gurus:
I have a problem that I know you will help me resolve...
I have two network cards in my Linux box.
1. public network:
10/100
192.168.1.102
default gw: 192.168.1.1
netmask: 255.255.255.0
I want this one routed to my router for internet/public use
2. private network 1000mpbs
192.168.2.181
default gw: none
netmask: 255.255.255.0
I don't want this one routed at all. It is used for backups, moving files, etc and is called by individual servers using /etc/hosts.
Now problem is that I can't get out and/or in to the box. It appears as though the default gateway on this system is 192.168.2.254. I set up the network via the gui and it appeared to be working, but alas it is not. It looks like things are only talking via the 192.168.2.X network, and that is not what I want...and from the outside world, nothing at all is talking to it.
Below is my ifconfig -a and my netstat -rn
Please help!
eth0 Link encap:Ethernet HWaddr 00:18:F3:E8:29:2A
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:193 Base address:0x8000
eth1 Link encap:Ethernet HWaddr 00:90:27:AC:7C:4D
inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5339 errors:0 dropped:0 overruns:0 frame:0
TX packets:1891 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:588251 (574.4 KiB) TX bytes:530473 (518.0 KiB)
eth2 Link encap:Ethernet HWaddr 00:0F:B5:43:16:D0
inet addr:192.168.2.181 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:300106 errors:0 dropped:0 overruns:0 frame:0
TX packets:617831 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:28009736 (26.7 MiB) TX bytes:585354764 (558.2 MiB)
Interrupt:217 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:816528 errors:0 dropped:0 overruns:0 frame:0
TX packets:816528 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:102034952 (97.3 MiB) TX bytes:102034952 (97.3 MiB)
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
0.0.0.0 192.168.2.254 0.0.0.0 UG 0 0 0 eth2

Ok...I did the following:
route add default gw 192.168.1.1 eth1
route delete default gw 192.168.2.254 eth2
I am able to get out to the outside world and it seems to work fine, but just curious:
1. How do I keep this from reverting again? (I could put this in my own script, but would rather not hack it, but do it right)
2. Are my routing tables below correct now (it works I understand, but want to ensure it is done correctly).
3. What is this route for (in the below table) and is it needed?
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
4. Since i'm relying on /etc/hosts files for the systems on the 192.168.2.X interface should there even be a route for this subnet?
updated routing table:
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

J6480 wireless and network help please!

I have an officejet J6480 that has an error in printing system when printing wireless. Everything is configured correctly and my printer reads the router and connects. If this problem cannot be fixed, can i use an ethernet connection directly from printer to router and get it to work. I tried this but also got a failure to print message. Please help asap! Thank you

hello,
first, cancel the print jobs
then try to restart the print spooler of the computer (click start>run... then type services.msc)
look for print spooler in the list
right click on the print spooler and click restart
if that doesnt work, then do a partial reset on the printer
unplug the power cord from the back of the printer without pressing the on button
press and hold # and 3 and wait for 10 seconds
plug the power cord back
wait for the printer screen to lit up then release the # and 3
try to ping the printer
try to print a test page again
keep me informed..

2nd MBP has messed up my home network--help please

I have a linksys wireless router. I have a MBP 1.83 gz and my MBP 2.2 GZ just arrived today. I turned them both on, both will get onto my wireless network (which is WEP protected) and then after two or three minutes neither computer can go online. Instead of showing a full strenght airport icon (which is normally shown) it shows one bar missing on both computers' airport icon. If I reset the router, I can get on one computer and be online, but as soon as I add the other computer, then I am unable to surf.
I also noticed that if I restart my new MBP I have to restart the router to be able to go on line.
I imagine there is some setting in the router causing this, but my knowledge is very limted. Any suggestions or resources would be greatly appreciated. Thank you in advance and I will be sure to mark your reply as helpful.
Owen Pillion

My wireless router is set up as Automatic Configuration DHCP.
Each computer works fine without the other on. If both are on, my original one works, but the new one cannot get on line.
I do not know how to get the ip configurations of my mac (I wish I did--I dont even know what that is). And I do not know how to see if both are using the same ip address or how to tell the computers to use different ones.
I know that my wireless network has been working fine. I have even used a PC notebook, been able to enter the WEP password, and surf with the MBP on. But with two MBPs--No surfing happening.

IMac / PC networking help please!

Hello
I have a PC with Outlook and an iMac with Entourage and a printer connected. I would like to be able to sync the Outlook calendar on the PC over to Entourage, and use the printer connected to the iMac on my PC.
I have an ethernet cable which I have connected to the ports on both computers and have looked at network settings but am at a loss as to how to set this up.
Is there a quick and cheap way of doing what I want to do with the set up described above?
Many thanks
Martyn.

http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2054.html
That article pretty much sums it up. YOu have to make sure that you assign the two computers IP addresses that are on the same network and subnet. (10.10.10.1 and 10.10.10.2 for example... subnet 255.255.255.0 on both). Then those instructions should work.
To share the printer look here:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1770.html
As for the Entourage/Outlook... I can't help with that but I'm guessing without an Exchange server, you're going to be jumping through some serious hoops to get it to do what you want. Maybe try Microsoft's support site.
Also, connecting two computers without a hub or a router is pretty limiting. You'd be better off buying a broadband router, unless you still use dial up... then I guess this solution is ok.

A few problems that I have switching to CS5 il. Help please?

Hi all,
The problems that I have all stem from the habits that I have aquired working with flash MX to casually produce graphics in over the years. I did so for it's ease of use and because, in honesty, I knew nothing about other vector programs.
Anyway now that I have been introduced to illustrator I can see the potential but there are a few things that make working in il frustrating, but if ironed out would make my workflow much smoother and faster, like it was in Flash.
Firstly, in Flash I would often use X/Y values to make sure my objects/shapes where in the exact right places. I can't seem to find an easy way of doing this in illustrator... Is there a window where I can simply input an X value and a Y value hit enter and the object selected will go there?
I also liked Flash's library system, and object system, I could make a shape or graphic select it all and "convert to symbol". This would then be stored in the library ready for pulling out instances of that graphic when needed and even making modified duplicates of the graphic. From what I can work out in illustrator the closest thing to this is grouping shapes but I'd like to know if there is anything closer to what I just described.
There are other issues that I'm having but much more menial and I'm pretty sure that they are more a case of practice makes perfect.
Through lack of patience I have not searched older posts for the answers to any of my questions/problems, sorry.
If anybody can help out with these I would hugely appreciate the effort.
To anybody who feels the need to flame at me for being underknowledged, please don't, but feel free to laugh at the fact that I've been using flashMX the whole time xD
Thanks!
Spen

Aha! seems so simple but yes, the transform panel seems to be just what I needed, I don't much understand the symbols panel, but will look into it, i presume I can save a selection as a symbol and then find it there? Thanks for the help Kurt

Apple Remote app on wired network: help please

I am trying to use the remote app to control my apple tv. I noticed that my bedroom apple tv unit was showing up in my app but not the living room apple tv. After further inspection I found that the ethernet cable was not plugged into the bedroom apple tv unit so I was on wifi to control the apple tv.
We do a lot of streaming in my house and having 4 apple tv's on wifi would just kill the streaming. From what I see, the device(iPhone) using the remote app and the Apple TV you want to control have to be on the same wifi network.
Is there a way to use the remote app when the apple tv's are connected via ethernet cable? They are still on the same network but the app doesn't recognize them if they are on ethernet.
Basically if I unplug my ethernet cables from the apple tv's the app works but when the ethernet is plugged in the app doest see the apple tv's present. Any way around this issue>

I am definitely on the same network. After about an hour I finally got it to work. My apple tv was plugged into my apple wifi router which is connected to a 24 port switch. I connected the apple tv directly to the switch and it came up instantly. I then plugged it back into the apple router and it continued to work. I am not sure why none of the apple tv's would not initially work when plugged in directly to the router since it is the same network. So I did this to all the apple tv's and they are all now working.
Home sharing was enabled on all the apple tv's. The only thing I did was connect to switch first(got a good connection via the app) then reconnected it to the apple wifi router.

WRT160n set up trouble in existing network -help please

It's a small business office. Cable modem comes into a Netgear smart switch, which distributes LAN to desktops and a older Wireless router.
So I hook up the router as directed, setup won't complete... error no router found.
Of course 192.168.1.1 is the netgear switch, so that's not available.
Grr.
I tried seemingly everything. Plugged it into the cable modem Lan ports, plugged it into the Netgear Lan posrt, put it in serial with a computer into the Netgear. Blah.
There's no usb connector to port into.
Ideas?
Thanks in advance!

Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...Under the Setup tab,the router ip address is 192.168.1.1...So change it to 192.168.1.2.Power cycle the entire network and it should work.

17" MacBook Pro and G4/500mhz Tower Networking HELP Please

I have a G4/500mhz system of which I've upgraded with an OWC Mercury 1.2ghz Processor and 1gb of ram, I bought a D-Link so the G4 is Bluetooth ready.
This is what I want to do wireless: Connect to the Internet (cable) to my New Macbook Pro and also my G4
Basically to keep this simple I want wireless from the G4 to the Macbook Pro and vice versa and being able to access my Cable Modem Wireless to my Macbook Pro...
Please give me the specifics of how to create this please and I will be greatly appreciative to you.....
I want the fastest and the most reliable that is the most important...
Ex: Airport, Wireless Router Software: Apple Remote Desktop 3.0 ?

Great Help

Photoshop CS5 Keeps Crashing - Help Please!

Hey guys,
This morning, I've gone to open up a PSD which I have spend a while working on, and, whilst Photoshop fully loads the file and is visible within Photoshop, the application crashes before I get a chance to do anything to the document.
It appears to only be doing this with existing PSD files, and if I open Photoshop by itself and create a new document, it works as normal. However, it's the existing files, which I have put a lot of work into, that need to work.
I have tried a restart, with no hope. Any suggestions please?
Many thanks,
Luke

Make sure Photoshop is Up-To-Date: http://adobe.ly/PS-Up-To-Date

Home networking help please

My new iPod has lead me to quickly fill the hard drive on my laptop. I've looked at the options for how to address this and have decided a wireless home network is the answer. I think all I need is an old PC (c. P3 1GHz) with a big hard drive and a wireless card and a bit of time to set it up.
I've never considered this before and it will definitely be stretching my technical skills, but I'm ready to learn. Can anyone recommend a good guide as to how to get started and just what I need to do? I seem to be able to buy what I think is a suitable spec tower PC for c. £100 and a new 250gb hard drive for £90. Am I being naive thinking it's this straight forward?

Why not simply get a USB or FireWire removable drive?
Gonna be a zillion times easier. Simply plug it in.
No need to have to mess with another computer, OS problems, networking problems, wireless cards, etc.
100 quid for 300 GB.
eBay UK External HArd Drives

CS5 Win7 Networking Help Please

Similar Messages

Maybe you are looking for