CS5 won't open its own panorama

First time I've made a panorama since upgrading to CS5. Photomerge worked as expected, the flattened file saves to disc, but when I try to open it, I get a dialog saying the file is not compatible with this version of Photoshop. What's going on??

What's going on??
The file could be corrupted, the disc could be faulty, the suffix could just be a wrong one etc.
Did you save across a network or locally?
In the first case the probability of data-loss would be higher.

Similar Messages

InDesign CS5 (Mac OS 10.6) can not open its own file

I need guidance to open an artwork file that in one hour I have to send to the print shop. InDesign refuses to open its own file.
Any clue? Adobe, please help.

Re: InDesign CS5 (Mac OS 10.6) can not open its own file
Bob and Peter
Thank your for helping us out. It was really necessary to ask a coworker to open the file and export it in InDesign markup language.
Three hours later than expected, but it's done!
We are stuck here. I'm a Master Collection user of CS5, using only Dreamweaver, Illustrator, Photoshop, InDesign, Bridge and Acrobat Pro. (I don't know why I bought the Master's). My coleague former Window user, got a Mac in May and downloaded the trial version of Design Studio Standard Collection of CS5.5. Before expiring, we purchased its license and filled it in the active trial version.
A couple of months ago we noticed that were missed Plug Ins on his version and contacted Adobe who instructed us to download the whole files again. We never did because it is a pain to get rid of the missing parts of a pre installed trial version etc.
I will ask Adobe to send a CD disk for his version.
Regards,
Junia

Photoshop CS5 won't open .kmz files

Photoshop CS5 won't open .kmz files. I did a fresh install of Google Earth, opened it, saved a place, and saved a .kmz file. It reopens fine in Google Earth.
When I try to open it in Photoshop, this message pops up:
File Format Error
This file is from a previous version of Google Earth or it is not a Google Earth file
I get this message regardless of the following:
- ps is closed and i right click the kmz and choose ps (rather than google earth) to open it
- ps is open and i double click the kmz
- ps is open and i choose file/open and select the kmz
- ps is open and i have created and saved a new psd file, then choose 3D/New Layer from 3D File/ and select the kmz
I have tried the usual remedies, change rwx permissions, repair permissions, delete prefs. No luck.
Any thoughts? Software versions are below.
Thanks.
- Photoshop CS5 Extended 12.0.4 x64 (doesn't work in x32 either)
- Google Earth 6.0.3.2197
- OS 10.6.8

I was trying to see (since Photoshop Extended touts the ability to open kmz files) if I could open a 3D Google Earth file and edit it in Photoshop. A file like this for instance http://ecotope.org/anthromes/maps/. After more research I've learned that kmz is nothing more that a container format - you can change the extension to zip and see what's in it.
I ran across this tidbit in the Photoshop CS3 Extended forum:
Photoshop CS3 Extended supports the ability to import .kmz files created from Google Earth 4 or exported from Sketch-up in the Google Earth 4 format. Photoshop CS3 Extended cannot open Google Earth files. If you have a Google Earth file, you can convert it to a Google Earth 4 format with the free version of Sketch-up.
So, theoretically if I could get a kmz into Google Earth 4 format, I could open it in Photoshop. But I haven't had any success importing a kmz or kml into SketchUp. Even just making a native sketchup file and trying to import that in psd gives a ram error.
Probably I'm wishing for the moon.

MacOS/Adobe Photoshop CS5 won't open...please help!

HI. My Photoshop CS5 won't open on Mac OS 10.9.5; I've got the latest update and updated Application Manager as well.
This is the error report:
Process:         Adobe Photoshop CS5 [410]
Path:            /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5
Identifier:      com.adobe.Photoshop
Version:         ???
Code Type:       X86-64 (Native)
Parent Process: launchd [149]
Responsible:     Adobe Photoshop CS5 [410]
User ID:         502
Date/Time:       2015-02-28 10:26:04.011 -0800
OS Version:      Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 122448A4-6468-AC79-8B51-E4BB5509F0E7
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/adobe_caps.framework/Versions/A/adobe_caps
Referenced from: /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5
Reason: image not found
Binary Images:
    0x7fff6b2ed000 -     0x7fff6b320817 dyld (239.4) <7AD43B9B-5CEA-3C7E-9836-A06909F9CA56> /usr/lib/dyld
Model: MacBookPro11,1, BootROM MBP111.0138.B11, 2 processors, Intel Core i5, 2.8 GHz, 8 GB, SMC 2.16f68
Graphics: Intel Iris, Intel Iris, Built-In
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, -
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, -
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x112), Broadcom BCM43xx 1.0 (6.30.223.154.65)
Bluetooth: Version 4.2.7f4 15112, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM0512F, 500.28 GB
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: iPhone
Thunderbolt Bus: MacBook Pro, Apple Inc., 17.2
Thank you!

Have you tried UNinstalling, and then reinstalling?

CS5 won't open NEF files from D600, despite updating camera raw plug in. How do I fix this?

CS5 won't open NEF files from D600, despite updating camera raw plug in. How do I fix this?

The D600 was first supported in Camera Raw 7.3 which is only compatible with CS6 and later - not CS5 unfortunately.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Some options:
FREE
Download the free Adobe DNG converter, convert all D600 Raw files to DNGs then open the DNGs in CS5
http://www.adobe.com/products/photoshop/extend.displayTab2.html
PAID
Upgrade to CS6
Buy Lightroom 5.4
Buy Photoshop Elements 12
Join the Cloud and get CC (subscription only)
Join the Photoshop Photography Program and get Photoshop CC + Lightroom (subscription only)

CS5 won't open using CONT+H in PSE8

For some reason CS5 won't open with the Cont+H hot key in PSE8 but will load if using the menu drop down...any ideas how to fix this?

It's normally ctrl+E to edit in an external program; at least from Lightroom to CS5
First you must set up the external editor in preferences.

Why won't InDesign open its own .indd file on iMac?

I have InDesign CS5.5 on an iMac OS 10.7.5 - I created an .indd file about a month ago on this machine, using this version of InDesign. This machine is not networked, the file has no links in it, no images and is only 1.3MB in size.
InDesign won't open the file and this is the message I get when I try to open it:
"Cannot open the file "odes_PRINT.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, o the file may be open in another application."
No other programs were open,the file was not open in another application and presumably, InDesign ought to support its own file format and not require special plugins to do so. No one but me has been in that file.
I've tried restarting the program and the machine, deleting and replacing preferences and renaming the file. It seems like this happened to me once before a few years ago with an earlier version and I believe I had to scrap that indd file. I could rebuild this file as it's just all text, not that big and I have the text in a plain text file BUT I want to know why this happens and what to do about it. I make large files for clients, this is a small client file that I can easily rebuild but some I can't and can't afford to have this happen again.
I've been googling this problem all evening and I'm out of ideas - anyone else got any?

Try my script in http://forums.adobe.com/thread/934429 -- it will tell you if it's an InDesign file or not.
If it tells you it is, the file must be internally damaged beyond repair. (And then you've lost it. Yes, it happens.)
If it tells you it is not, then ... well, then it is not a native InDesign file. At that point you need to retrace your steps: what did you do when you thought you were "saving" it? (As it is, in fact, impossible to use "save" in InDesign and not save 'as' an InDesign file.) What other file type could you have used? Do you ever manually or automatically rename files?
Needless to say, if it is no longer an InDesign file (never mind what the file extension says), then you cannot open it in InDesign anyway. But if you know what type of file it is, you can open it with the appropriate software (e.g. a JPEG viewer or an RTF reader) and see what's in it.

How do I stop Firefox from opening its own homepage tab on top of my homepage?

Firefox keeps opening up its own website in my browser on top of my own home page even though I have reset the home page numerous times. Everytime I open firefox I have to reset my home page which works for a half-day or so and then ... we're back to the Firefox homepage. How do I keep Firefox from hijacking my browser?
P.S. I've tried all the stuff that's recommended -- resetting my homepage, etc ... and I'm just getting tired of having to do this. This is getting so irritating I'm going to stop using Firefox and start using another browser.

I am having a similar problem, I'm using "Show my home page" on start-up but firefox decides to always open to the last page visited regardless. I also generally close Firefox using the red X or with alt+f4. This problem is especially annoying when the last page 'visited' is an annoying pop-up ad that wasn't been caught by the pop-up blocker.

Dreamweaver CS5 won't open any files from a project

Hi,
I'm working on a simple website. I work on it from 2 different locations (home and work), and the files are stored on a removable USB disk. The problem is that for some reason Dreamweaver won't open any files made on the other computer. It shows the sitemap, eveything. But when I click on a file, nothing happens.
I've tried a couple of things:
1. recreate the site in the site manager - still the same problem
2. remove the preference folder - still the same problem
The only solution is that I have to copy the files to my desktop, recreate the website in the sitemanager and then it works. But only if I copy the files to my desktop, any other location on my HD (not the removable USB disk) simply doesn't work.
Does anybody know why this happens? Or even better, does anybody have a tip of how to workaround this problem?
thanks!

The D600 was first supported in Camera Raw 7.3 which is only compatible with CS6 and later - not CS5 unfortunately.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Some options:
FREE
Download the free Adobe DNG converter, convert all D600 Raw files to DNGs then open the DNGs in CS5
http://www.adobe.com/products/photoshop/extend.displayTab2.html
PAID
Upgrade to CS6
Buy Lightroom 5.4
Buy Photoshop Elements 12
Join the Cloud and get CC (subscription only)
Join the Photoshop Photography Program and get Photoshop CC + Lightroom (subscription only)

InDesign CS5 won't open

I just received my Adobe CS5 and have installed it. Every program opens fine with the exception of inDesign. I had a trial version of inDesign CS4, but have uninstalled in incase there were any issues. I'm not sure why it won't open.
I've installed any applicable updates for the program as well as my Acrobat Pro to the newest version (9.something)
The software is closing down at the point where it says "Starting up Service Registry"
Any ideas on what could be going on?
I'm completely new to this software in general, but I thought I'd go to the forums and see if there was anyone out there who could help.
FYI:
I'm using a MacBook with Version 10.5.8 software
2.4 GHz processor
with 2Gb 667MHz memory
Thank you
-Summer

http://kb2.adobe.com/cps/328/328886.html

Dreamweaver CS5 won't open in OSX 10.6.8

Just updated to 10.6.8 and now DW won't open. It was fine until this update. Now it starts to launch, but then I get this:
Process:         Dreamweaver [721]
Path:            /Applications/Adobe Dreamweaver CS5/Adobe Dreamweaver CS5.app/Contents/MacOS/Dreamweaver
Identifier:      com.adobe.dreamweaver-11.0
Version:         11.0.0.4909 (11.0.0)
Code Type:       X86 (Native)
Parent Process: launchd [188]
Date/Time:       2011-06-25 09:35:11.812 -0700
OS Version:      Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report:          14994 sec
Crashes Since Last Report:           5
Per-App Interval Since Last Report: 124 sec
Per-App Crashes Since Last Report:   5
Anonymous UUID:                      B6AE7CE1-69B6-4F97-8CD4-7A0FCF271968
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x000000000000000c
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Vault is NOT enabled, and I removed a new DW extension just in case that was the problem, and also did a permissions repair, but I am still getting nowhere. Any ideas?

Hi, pmajor. Welcome to the Adobe user-to-user forums!
I noticed that your error report indicates that you are using build 4909 of Dreamweaver CS5, which is the release version. There have been some updates since, so I would suggest that you install the latest, 11.0.4 (build 4993), and then see if the problem persists.
You can get the latest update by going to Help > Updates in Dreamweaver, or by downloading it from the following page and then installing it: http://adobe.ly/DWUpdates
HTH!

Dreamweaver CS5 won't open on Windows 7

Hello all. I installed CS5 Web Premium on a Windows 7 machine. Every CS5 application works except for Dreamweaver. I tried replacing, renaming and removing the "updaternotifications.dll" file and the application still won't open. I also disabled the registry key that gives Adobe CS5 the ability to automatically search for updates. Please help.

Hey rcshield thanks for your help.
I managed to find a solution in a different adobe forum:
http://forums.adobe.com/message/4176387#4176387
nylonblade's post:
"Windows 7 users' possible fix
Hi all Win7 users of DW CS5 that dies after the splash screen. You might want to try recreating your DW preferences as described here:
http://kb2.adobe.com/cps/839/cpsid_83912.html#main_Restore7V
It worked for me. I think the problem was caused by running CCleaner which deleted the wrong registry key. Bad CCleaner! Be careful running those "helpful" system cleaners, folks. They can royally screw up a computer if you trust them too far.
Anyway, DW CS5 is back in action for me at least.
Regards
Mark"
Worked for me.
Thanks

ITunes won't open its says "this version of iTunes has not been correctly localised for this laungage. Please run the English vresion" hep

IiTunes won't open says it is wrong langage and to run English version. I am trying to open in windows.
Apple is

Try moving the file C:\Users\<User>\AppData\Roaming\Apple Computer\iTunes\iTunesPrefs.xml out to your desktop then start iTunes. This will force iTunes to create a new preference file which may do the trick. You will need to review your iTunes preferences after doing so in case you made any changes to the default settings that you need to reset.
tt2

Dreamweaver CS5 won't open after installing OS X Mavericks

I've followed the instructions in previous posts, but still Dreamweaver won't open. In a terminal window, this error message shows....
-bash: syntax error near unexpected token `;'
Any help please?
Many thanks!!!!!!!

Hi SherriDD,
Can you try the solution mentioned in this doc?
https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html
Thanks,
Preran

HELP. Safari on my new Mac Pro won't open my own webpage.

I have just changed platforms from PC to Apple Mac with the sole purpose of generating new content for my web page www.austin-thomas.co.uk
Unfortunately, I cannot open my own web page using Safari on my Mac Pro running Leopard, although I can access other web sites without problems. I have tried my web site on several other Macs running Safari and Leopard and it loads as normal. I still have my PC linked though the same router as the Mac Pro and I can access the site OK via Windows Internet Explorer, so I don't believe it is a router or a permissions problem.
Any help or suggestions is gratefully appreciated as I have a new and expensive computer that for some strange reason is not compatible with my website.
Many thanks in advance,
Austin

It sounds like it's just timing out trying to access parts of the website.
Can you try changing your DNS settings to those provided by [OpenDNS|https://www.opendns.com/start] to see if that makes a difference? The linked website has easy to follow directions.
I've seen the occasional post that also mentions power cycling the router sometimes helps (even when their other connected computers were behaving fine - don't ask me how that works... )

CS5 won't open its own panorama

Similar Messages

Maybe you are looking for