CS5 work with Lion, CS4 and earlier versions do not!

Does CS5 work with Lion because CS4 does not!

Further information, I have downloaded FireFox 3.6 which I run via Terminal, this works correctly with all the IP addreses I wish to access.
My LapTop has the same problem, I'll add 3.6 to that.
regards,
David.

Similar Messages

Does firefox now work with webroot antivirus? Earlier versions did not

6.0 and 6.1 did not support webroot antivirus so I was not going to update until this problem was resolved.

The only requirement is to have the same Firefox Sync version installed on all computers. The OS doesn't matter as long as you can install Firefox and the extension.
* Firefox Sync: https://addons.mozilla.org/en-US/firefox/addon/10868/

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the

Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot). It also does not show up in the ;ist of pritnters, scanner when I open Image Capture. I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below: Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.

Will photoshop CS5 work with Lion

I need to get a new photoshop, mine is out of date. Will Photoshop CS5 work with OS 10.7.2? Adobe doesn't include 10.7.2 in their tech specs.

I have it and it runs fine on Lion.

Working with AE CS4 and Final Cut Pro

Hi all,
I've been doing a lot of projects recently working between AE CS4 and FCP.
All the work I've been doing has been animation based and all projects have been HD. I've been rendering out clips of up to a minute from AE as .mov with H.264 codec and then putting them in FCP to edit together.
The problem that I'm having is that quite often FCP runs slowly once there are a lot of mov files in the sequence. It also crashes when there is a long (50 seconds, so not really that long!) .mov clip in the sequence. I was just wondering if there is a better way for me to be rendering these clips out for use in FCP. Obviously they need to stay at a very high quality.
Any help would be much appreciated,
Thanks,
- Lewis

As Andrew said, simply use different CoDecs and don't get miserly on file sizes. Simply buy another harddisk, if you run out. H.264 is very processor intensive and even the most beefy MacPro with FCP3 can only decode so many such files in realtime. For ProRes, Todd provides additional guidelines on his blog, but of course other CoDecs shoulkd work as well.
Mylenium

FireFox 4 and earlier versions will not install on my Windows Vista, 64 bit computer. The file downloads and the file extracts but I never make it to the installation wizard.

I have tried to download FireFox 4 and earlier versions from several different website, thinking the files might have gotten corrupted, and each time I download the file the exact same thing happens, the file downloads and the file gets extracted but when the extraction completes the small window dissappears and nothing else happens.
My machine is a Windows Vista 64 bit system and I've tried downloading the file with my 32 and 64 bit Internet Explorer but nothing seems to work. Can someone help me please because I would love to be able to completely delete I.E.

Hi, thanks for your Flash file info. Well you must have been doing it right, since all of your Flash files for IE and FF are correct.
The SWF plugin for FF and the SWO for IE are also correct.
You shouldn't be having any problems with Flash Player.
What you can try is to turn off the hardware acceleration feature. Go to any video, like youtube and right click on the video and click on Settings. Display Settings is where you will UN check hardware acceleration.
See if that helps. Let me know.
Thanks,
eidnolb

T61 worked with Dual Monitors and now it does not

I'm having trouble getting two monitors to work. They used to work fine. There have been no changes to hardware. Now the DVI monitor is blank. The DVI monitor does work with other computers (I'm working through a KVM switch).
T61 running XP Pro
Docking station
Worked well in the past
Took laptop to a meeting and used VGA and Laptop displaying the same information (needed to fool around with a few things to get that to work (FN-F7, Presentation Director, not really sure what worked)
Came back to docking station and my second monitor does not work anymore.
Control Panel
Shows two monitors (1 Bright, 2 Grayed)
Can select and choose extend on the second monitor (1 Bright, 2 Bright)
Apply reverts to (1 Bright and 2 Grayed)
NVIDIA Control Panel\
Set up multiple displays show choice is Only use one display (Single)
Second monitor choice is grayed
Presentation Director
No option is shown for two monitors
Laptop and monitor choices exist
BIOS Display
Tried Internal and PCI options (no joy with either)
Display is set to VGA & DVI
Any suggestions??

The docking station is a type 2504. I have both the VGA and the DVI port hooked up to identical flat screen monitors. I have no intention of messing with that because the setup is working successfully via a KVM switch. Both ports and both monitors are working. However, there is a problem with swithching modes with the Lenovo laptop. The problem does not exist with any other computer working through the KVM switch.
Please note that:
this Laptop on this docking station, at my home, with all wiring and monitors unchanged, has worked for a long time.
I took the laptop off the docking station, went to a meeting, hooked up to a projector, and successfully configured the laptop such that the laptop screen and the projector were displaying the same screen at the meeting.
Then, I brought the laptop back to the same old docking station at my home and tried to regain use of my dual monitors unsuccessfully.
Using Control Panel display, and all sorts of combinations of NVIDIA Control Panel, the 2nd monitor would not be consistently detected by NVIDIA Control Panel. During these attempts, on a few occasions, I had an option to Set Up Multiple Displays in NVIDIA Control Panel; but there was no success in choosing this option. Returning to NVIDIA Control Panel / Displays would not present Set Up Multiple Displays as a valid option (not present or greyed - can't remember). I even went through permutations with the laptop screen open and closed, warm boots, cold boots, searchign for new hardware, etc. Nothing was successful.
Although changing the display within Windows Control Panel / Display was an option, any attempt to extend or replicate the dispay on the second monitor would fail and Windows Control Panel / Display would go back to the single monitor configuration was not successful and effectively ignored by both Windows Control Panel / Display and NVIDIA Control Panel.
You may note the use of past tense. I simply gave up and went to doing productive work on one monitor. After a few weeks, I went back to NVIDIA Control Panel and the second monitor was detected. I was able to Display / Set-up Multiple Displays via NVIDIA Control Panel. Subseaquently, I was able to use Windows Control Panel Display to enable and configure the second monitor and both monitors started working again (without having made any changes to wiring etc).
I don't believe there is any difference in how I used NVIDIA Control Panel on this successful attempt than in any of the earlier failed attempts. There seems to be some sort of a problem with getting the Lenovo to recognize that the second monitor is really there. Please addess this part of the problem as I expect to repeat the process in an upcoming meeting with this laptop.
Thank you for your attention.

I'm getting this error "sec_error_ocsp_bad_http_response" on several sites with FF 6.0.2 and earlier versions, but not getting the error with IE.

I've been getting this error on several websites, this is the latest one it just came up on. I got it while trying to sign onto this page.
I am able to connect using IE 9, Windows 7 Enterprise.

Under Advanced>Encryption:Certificate>Validation both boxes were checked, to Use OCSP server to validate the certificate and if the connection fails, then to consider the certificate as Invalid.
I unchecked the second box (consider the cert as invalid) and now I am able to connect to the websites. This is a business computer and I don't surf with it very much (when I do it is to answer IT questions using Google searches) so I'm not too concerned about turning off the validation.
Thanks for you assistance to both '''cor-el''' and to''' mha007'''.

Crystal Reports Version to Work With Vb 6 and VS 2008

Hi,
We have some legacy VB 6 applications which are too large to port over to Visual Studio which use Crystal 7.0
Recently at one site there have been problems with another application which uses a new version of Crystal. Either one or the other will work but not both. This might be solved by ugrading to Crystal XI R2 ( I believe that newer versions can run side by side). However, we also have new projects starting that are to be developed in VS 2008. As I understand it, Crystal XI R2 will not work with VS 2008 and CR 2008 will not work with VB 6.
We really donlt want to have to buy both versions !!
Anyone got any ideas ?
Many Thanks
Paul

CR 7 did not support side-by-side installs. Likely what is happening is the your app and the other app is loading crpe32.dll from the \windows\system32 folder. Which obviously will not support each other. This is the only dll that is common among all versions of CR, see below for more info, and that due to it's location can cause issues like this. Newer versions from 8.5 do version checking and athough the dll's have the same name XI R2 will not load other versions, there are exceptions. The exceptions are UFL and some legacy database drivers that will work in any and all versions.
A few possible work arounds, in your app do version checking when loading crpe32.dll or specifically if crpe32 is residing in a memory space that some other app has loaded it and Windows will share, check the version of the dll and if in your case it's not 11.5.x.x. then pop up a message indicating they must close the other Crystal app before continuing.
Move all the runtime files into the applications startup folder, what's specified in the Icon on the your desktop or short cut. Moving them there may fix this, we start looking for our runtime where your EXE is located and then in the working Folder, then in the \system32 folder and finally down the PATH statement. We also have hard coded specific location in our load methods. In this case you may have to rename the \windows\crystal folder from the CR 7 install. But I don't recall if this will break the CR 7 app.
Also if you are moving the version 7 runtime or the other app it may break that application so make note what you did so you can restore it. Also highly suggested to back up everything and test this on a test machine before applying to the production PC's.
You can use tools like Filemon and modules from our site. You can get filemon from www.sysinternals.com.
Other than that it will not likely work due to 7 not supporting side-by-side and will load anything it finds. And of course, Don't support or install both versions of software on the same PC.

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

Ok. I hope someone can answer my question. I am new to photoshop. I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - includi

ok. I hope someone can answer my question. I am new to photoshop. I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - including the adobe "instructions" seems to work. How can i get this software in a downloadable format? is it actually free - I'm assuming it is... Hope someone knows the answer to these questions...

The download itself is free and is valid for 30 days only. After that, the software ceases to work.
CS4 is pretty old, no longer sold and no longer supported by Adobe. It's also not compatible with many modern OSes.
Why do you have to work with such an obsolete version of Photoshop?
What kind of "designer" uses it?

Will CS5 work with Max OSX Snow Leopard, Lion, and Mountain Lion?

Will CS5 work with Max OSX Snow Leopard, Lion, and Mountain Lion?

Hi,
You can check system requirement for CS5 in link : http://www.adobe.com/store/en_us/popup/software/creativesuite/mastercollection5/systemreqs .html
Regards,
Jatin Dembla

Does my iPod Classic 30GB, software version 1.3 work with Lion and iCloud?

I have a iPod Classic, 30GB, software version 1.3 does it work with Lion?

only iOS devices like ipod touch(in wifi), ipad(in wifi), or iphone(in wifi) can sync automatically without the dock connector
so yes you do have to sync them onto your classic

Adobe Photoshop CS5 is not working with Lion.

Adobe Photoshop CS5 is not working with Lion. It is totally non responsive to a point where i cannot work. all other CS5 programs seem to be running well so far. any advice? if no, then how do i revert back to Snow leopard?

I had real problems with all Adobe apps - it said I needed to install a version of Jave Runtime, but kept saying that I wasn't connected to the internet to complete the action. This was not the case - I was connected to the internet.
I followed this link : http://support.apple.com/kb/DL1421 to install a version of Java and all Adobe apps fire up now. Haven't done much testing within the apps, but at least I'm further ahead than I was.
So thanks to the message boards for helping me out.
Reg

What versions of Adobe Acrobat work with Lion

I would like to purchase Adobe Acrobat Standard for may Mac with Lion installed. It's not clear from the Adobe web site which versions of Acrobat are compatibile with Mac and Lion. I would appreciate any advice.
Thanks,
Rick

This article from Adobe http://kb2.adobe.com/cps/905/cpsid_90508.html (scroll down to "Acrobat Family") says the plug-in doesn't work with Safari 5.1, but the app itself works with OS 10.7 and 10.6. I don't use Acrobat but this implies that the latest version should work with Lion. Maybe an email to them will get an answer for sure.

CS5 work with Lion, CS4 and earlier versions do not!

Similar Messages

Maybe you are looking for