Cs6 3D rendering speed too slow

How do I increase cs6 3D rendering speed

Do you have 13.1.2? If so, go into the 3D preferences and increase the Render Tile Size.
-Noel

Similar Messages

Broadband Speed too slow for BT's own services.

Hello, I have recently heard that BT Sport has the rights for MotoGP in 2014.
Brilliant, I have BT Broadband, it will be free for me.
Oh wait, the required speed is 400kbps, and my BT provided Broadband is less than half of that speed!
I assume, BT will be upgrading the equipment in my area to enable me to have the required speed to view this?
I can dream... Seriously angry about this.

Well folks, I managed to find my way into BT Sport because I'm in the same boat as Tourn46, I want to carry on watching MotoGP in 2014 (but I won't pay subscription fees to anyone).
Just checked my connection speed - excellent - 8MB.
Just watched some tennis on BT Sport 2 - YouTube quality at best. BT Sport 1 even poorer and ESPN, wouldn't connect.
Hohum. No more watching those incerdible machines being wrestled around at 200mph in HD/slow motion. I think I'll probably not bother to watch. I see I could maybe get HD by paying for an Infinit package - oops, I won't pay any more so that's out. I see the BT channels come up on my Samsung SmartTV on FreeView, but I'd need a subscription box to get those- oops, I won't pay any more so that's out too.

Download and Upload speed too slow...

A friend of mine posted this on his Forum this morning, any thoughts...
My Mac at home is making me pull my hair out, is so slow in internet up and downloads that I can barely tolerate it. It's a late 2012 27" iMac running Yosemite 10.10.2 , 3.2 Ghz Intel Core i5 chip with 32 GB memory, NVIDIA GeForce GTX 680MX 2048 MB Graphics card. By all accounts it has good hardware. I have been struggling with download speed for two months with this machine. On Verizon FIOS, with the newest Wi-Fi Router and it hangs on downloads all the time. Running Verizon speed tests I get:
28.3 Mbps download
43.79 Mbps upload
9 ms latency
This is in both Ethernet AND Wifi, either way I get the same approximate results each time
Now, I have a new Dell Laptop that is only two weeks old and here's what it does running the same speed test 2 seconds after the iMac is done and at the same spot in the house as the iMac:
58.12 Mbps download
82,05 Mbps upload
11 ms latency
Clearly the new little laptop is running nearly twice as fast. So it has to be either 1) hardware on the iMac, or 2) software on the iMac
To eliminate as many factors as I can, I wiped the hard drive clean on the iMac and did a clean install of the OS (Yosemite). It had no effect on speeds, which was very disappointing. So since there is nothing else I can think of to test, am I wrong to think its the operating system itself? It seemed to run faster on Snow Leopard.....much faster. I'm out of ideas - anyone have anything?

This issue was totally resolved with this week's Yosemite point release.

Rendering speed is slowing down during process, almost up to freeze

Hello there!
First of all, I'm a new person to After Effects. I bet I just doing something wrong, but anyway I would like to ask an advice how to fix my issue because googling such subject won't solve it.
The point is following:
I rendering 120-minutes long video for YouTube. It almost static with no effects, just with a few simple fade-in/out transitions on couple of layers. You can find an example of such video on YouTube by this link: Daniel Lesden - Rave Podcast 056: guest mix NitroDrop (Israel) - YouTube (for some reason, specifically this video was rendered successfully previously).
Process is going very well at first, 1 minute of playback rendering for about 30 seconds, so first hour of the video rendering for 30 minutes.
The problem starts at about 70% of overall progress: it start to slowing down, and then goes to 1 frame rendering for 1 second. As you can imagine, it's a pain for such long videos, it will take a days to finish last 20-30%.
Composition and render settings are following:
Size: 1280 x 720 px
FPS: 30
Format: Quicktime
Codec: ProRes 422. I've also tried: Animation, Photo JPEG, another ProRes and even H.264, but outcome was the same.
Output module settings screenshot:
Multi-processing settings:
On this point I have to say that I've tried many different options with amount of CPU, RAM or with Multi-processing option turned off completely, but in the end it all was the same.
After Effects version: CC 2014 (still on trial version, but it shouldn't be a problem since Adobe don't have any limitations for trial versions as far as I know).
Computer and OS information:
Any advices please? I'll very appreciate every possible solutions.

"open AE preferences>General then move to the bottom tab and set AE to purge every 10 frames or so"
— I've set this parameter to 10 as suggested, and here are the last render queue results:
First 60-minutes video rendered superb good for 1 hour 17 minutes.
Second 120-minutes video goes really badly: it took 8 hours to render about quarter due to error. Here is what I found in the error log: "There is an error in background rendering so switching to foreground rendering after 246 frames completed out of total 216000 frames. (26 :: 142)".
Later I've tried to render second video again, and it was great almost till finish: 1 hour 45 minutes has been rendered for less than an hour. But then it suddenly slowed down (as described in the original post), so I had to stop it. I installed Memory Dig and "optimized" memory before rendering and once during process, but it didn't help. In the end I just rendered last 15 minutes of the video (with no issues) and just merged it into 120-minutes long file using Video Joiner. Pretty sad method, although.
On a third attempt everything was fine until rendering stops by a new error in popup window: "After Effects error: internal verification failure, sorry! {could not find itemframe we just now checked in}".
So the original problem still wasn't solved yet unfortunately.

CPU fan speed too slow Core 2 Duo on 975x platinum

This is my first attempt at building a computer and things went good except for the CPU fan. The CPU, according to BIOS, seems too hot, idling at around 38 to 40c and loaded at around 45+ but I haven't used it hard yet. The fan speed when controlled by the mobo is only about 800 to 900 rpm when idling. I turned off the mobo control and the fan went to 1700. Surely this thing can turn faster than that, is there something I'm missing here. I really don't want to buy a different fan if this one will work. Noise is not a problem for me I just don't want to run the CPU that hot. Help!
Thanks,
Jason

Intel Core2Duo is using Thermal Throttling Technology,or in this case TM2 (Thermal Monitor 2) . This is the main part of Intel SpeedStep Technology. It can decrease the multiplier on a CPU and decrease the CPU voltage (vcore), thus lowering temps but reducing the clock speed of the CPU. This is only activated when a small amount of processing power of the CPU is actually required. Here you are some temperature specs for Core2Duo
Thermal specification:61.4°C
Thermal Design Power:65W
The thermal specification shown is the maximum case temperature at the maximum Thermal Design Power (TDP) value for the processor. So, you have a normal temperatures for the processor, and you'll have to get used to that low noise

Internet speed too slow in hotspot mode on iPad after upgrade to iOS8

Problem:
After upgrade from iOS7 to iOS8 my 3G internet speed shows very poor performance in Hotspot mode.
Before upgrade (on iOS7):
3G
without hotspot -- 4 MB/s
in hotspot mode shared over WiFi -- 4 MB/s
After upgrade (to iOS8):
3G
without hotspot -- 4 MB/s
in hotspot mode shared over WiFi, Bluetooth and USB -- speed drops to stable 20-30 KB/s regardless of attached device or network quality
I contacted my 3G operator, they report to have made no changes, and have no clue and suggest me to contact 'equipment manufacturer'.
I have tried different kind of settings, resetting/experimenting with APN/username/pass. The only thing I haven't done so far is I didn't erase/clean reinstall my iPad. But I will do it soon.
Could you please suggest:
a) has anyone else faced such a problem?
b) has anyone have an idea how to fix it?
Thanks in advance for any kind of help.

Update:
A solution was to leave the 'Hotspot APN' blank and fill out the 'login' field instead with <any> symbols.

Upload speed too slow to send emails

Have been having problems sending emails with attachments since 13.08.14. Been using BT Broadband for 5 years and although speed has never been great, it has worked. I run a sizeable business with customers all over the world so it is imperitive I am able to send attachments to my emails. They are never that big but it will not send anything over 210KB and most of mine are around 450KB. I get a message saying not sent as timed out by server. My download speed is testing at 1.2 and my upload at 0.2. Over the past month I have had 5 different openreach engineers here who have all tweeked and fiddled with things, download speed has improved slightly but my actual problem of not being able to send emails has not improved! Some of these engineers have said that although the BT Wholesale test is stating 0.20 the actual speed is only 0.008. BT have said this is impossible as the test is 100% accurate. Today BT have told me that there is nothing they can do so I am guessing I will have to try and go down the mobile broadband route. Just wondering if anyone had any thoughts, just seems very odd that the problem occurred overnight but is not a fault?

as a business user you need to post here https://business.forums.bt.com/
this forum is for residential customers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Infinity speed too slow

Since having infinity installed my broadband connection is worse than it was before. The spped is slow and sometimes when I try and enter a web page it just hangs. Please help ..

As before on your previous topic, which exchange?
If i've given you a helpful answer please rate me by clicking the rating star to the left
BT Total Broadband Option 4 - London - Pimlico Exchange

Re: profile reset and speed too slow Again

I have just signed upto BT phone & Broadband, my line was connected on the 29th June 2012. Since then i have nothing but problems. No proper phone line until the 6th of July, thankfuly thats working well now.
Broadband was promised 17meg as im only 380 meters from the exchange, well thats what the engineer told me when installed the line.
I have raised a number of queries with customer support, first one got closed off with out being resolved, so now have raised the same issue again. So now have a new ref number
Problem being i only get 2.6meg download & point 0.83 upload speed, returns the same result which ever speedtest site you use.
I am now going to ask what my profile is & request a new one, I am spending every night on the phone to BT being told different stories.
I was told i will get a call back tomorrow at 4pm to find out if its improved at all, i don't expect a call back. As no one ever does. Im sorry BT when it comes to customer service you fail in every area.
I am in the process of wrinting a letter to your CEO Ian Livingstone to complain the way i have been treated.
If you have any ideas what the issue maybe then please feel free to post something of use, But if you are going to tell me to do a wired connection or reset the router & switch off for minutes & then try again. Please don't bother as ive been there & have a number of T shirts to show for it
Regards
a disgruntled BT customer, who is at the point of being an ex Bt customer.
Solved!
Go to Solution.

So are you saying i wll only ever get 2.6meg?
As requested
Line state:
Connected
Connection time:
0 day, 02:10:48
Downstream:
3,072 Kbps
Upstream:
1,179 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
30.2 dB / 8.7 dB
Line attenuation (Down/Up):
24.5 dB / 14.7 dB
Output power (Down/Up):
0.0 dBm / 12.6 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
3 / 6

Broadband speed too slow

Hi thanks for the heads up on the phone numbers -
My broadband speed runs between 4kbps and 6 kbps when I am paying for upto 20!
My next door neighbour (also with BT) had the same complaint and after several visits from openreach is now running at 14 kbps
BT have tested the line and promised to do something about it on two occasions!
BT speedtest results are shown below
Please help
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
6329 Kbps
0 Kbps 7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 6329 Kbps
For your connection, the acceptable range of speedsis 2000-7150 Kbps.
Additional Information:
Your DSL Connection Rate :8020 Kbps(DOWN-STREAM), 1024 Kbps(UP-STREAM)
IP Profile for your line is - 7000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 4.03:15.82:80.16 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
825 Kbps
0 Kbps 1024 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 825 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1024 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
Please visit FAQ section if you are unable To understand the test results.
Notes:
The Download Speed is the average rate that was achieved during this test.
Notes:
Your line is configured to the maximum rate that it can support or at your chosen fixed rate, this is known as the line rate and would be viewed through your CPE software or in your router configuration.
Your IP profile is always less than the line rate and is normal on any network.
The Upstream Test rate figure quoted will always be smaller than the assured rate profile. This is because in order for the throughput to reach its destination, it requires an overhead which explains the difference between the two.
Notes:
If your download speed lies in this range then your connection seems to be working fine.
Notes:
The Download Speed is the average rate that was achieved during this test.
Notes:
Your line is configured to the maximum rate that it can support or at your chosen fixed rate, this is known as the line rate and would be viewed through your CPE software or in your router configuration.
Your IP profile is always less than the line rate and is normal on any network.
ADSL line status
Connection information<script type="text/javascript"></script>
Line state
Connected
Connection time
11 days, 8:43:27
Downstream
8,023 Kbps
Upstream
1,024 Kbps
ADSL settings<script type="text/javascript"></script>
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
15.1 dB / 5.6 dB
Line attenuation (Down/Up)
24.5 dB / 12.4 dB
Output power (Down/Up)
20.9 dBm / 12.2 dBm
Loss of Framing (Local)
35
Loss of Signal (Local)
3
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 10672
CRC Errors (Down/Up)
611 / 2147480000
HEC Errors (Down/Up)
nil / 392492
Error Seconds (Local)
939

Hello Mike and welcome to the forums,
Edit you post and remove your phone numbers! This is a public forum and people can mine information like that and use it for spamming purposes!
The speedtest results look ok (?). Please could you post the stats from the Homehub (assuming you are using one)?:
http://192.168.1.254
Click on A-Z in the top right
Click on ADSL settings
Copy and paste all the information displayed into this post. This will allow the Forum sages to see whether you have noise or attenuation problems.

Quality changes after rendering/speeding up/slowing down a clip in FCP 6

I use mpegstreamclip to get my canon 7d footage into FCP. Everything looks fine until I render it.
I set my mpegstream clip settings to apple pro res, full quality, 1920x1080 (unscaled), 30 fps.
What am I doing wrong here?

I'll need more info to narrow down on the problem.
When you play it in the timeline, everything plays fine, right?
What format did you digitize? MiniDV?
What timecode is changing?
If you Export as quicktime movie, there is no timecode.
If your refering to the timecode in the browser, make sure your looking at the MEDIA START & END (Not the in & out)
When your refering different footage, are you speaking of a completely different shot from your footage? Or is the cut just off?
Check this setting:
Goto menu bar: SEQUENCE SETTING; click render control tab.
check on all boxes. set all to 100%. Codec=SAME AS SEQ
In the timeline, make sure all the tracks are on GREEN. (The bubble on the far end left)
Test some of the media files in iMovie or quicktime to see if they're corrupted in some way.
If there is no fix, you may need to re-install the app.

Exporting is too slow - FCP 7

Hi,
Problem:
I don't know why rendering and exporting are too slow, even when i woke up this morning and found my video exported it couldn't open.
I'm trying to export a 10min footage.
It tells me it needs 35 - 40 min to export and after 30min. the time remaining is still the same (30min).
after a few hours of exporting, the video does not open/play.
Technical Settings:
I converted my footage to ProRess (HQ), the sequence settings are set to ProRess (HQ) too.
the material in the sequence and the sequence settings are exactly the same.
Additional Info.
I tried exporting to my machine instead of a hard drive to check if the problem is from the hard drive, but still exporting at the same speed (too slow).
I've been editing for 10yrs. and never faced this problem.
my machine is an iMac. OS X, Version 10.6.8, Processor 2.66GHz i5, Memory 4GB 1067 MHz DDR3.
Thanks,
Omar

And here are some other troubleshooting tips
https://discussions.apple.com/docs/DOC-2591
Are you running any other programs at the same time? If so, quit them and see if that makes a difference.
Also what are your sources? Prores(HQ) may be way overkill.

I am trying to get better playback rendering speed Premiere CS6

I am new to Adobe Premiere CS6. I am trying to get faster playback rendering speed from my machine.
Windows 7
i7 4790K Haswell overclocked to 4.5 (watercooled with Corsair)
16 GB DDR3@799MHz
Asus Z87-WS (4 double graphic card slots)
Geforce GTX 760 (Primary) GPU hardware acceleration enabled
Quadro FX5800
250GB Samsung solid state C: (Windows and Adobe)
250GB Crucial solid state (Scratch)
2TB Seagate 7200RPM (video files)
3TB Seagate 7200RPM (storage)
Seasonic 1000watt PSU
I am primarily editing GoPro videos with effects like TimeWarp or Twixtor and color correction.
I have tried to run the PPBM6 program with no success. I kept getting failure to access files.
I have been looking at adding a second GTX760 with SLI so they will work together. And possible removing the Quadro if it is slowing things down.
Any advice would be appreciated. Thanks!

...are you SURE your 760 GPU is "enabled" by PPro, and giving you the option of "Mercury Playback Acceleration" under "General Preferences" ??? If the "Mercury Acceleration" is GREYED OUT and limits you to "software Only", go to Studio 1 website and learn to apply the well known "hack" to enable your 760 in PPro,OR, download their simple program to do it for you.
...Your machine is POWERFUL....especially with your CPU overclock......you MAY want to increase your memory to 32 GB if you are using After Effects....even PPro MAY run better with 32 GB, depending on your workflow.....most systems like yours have at LEAST 32GB system memory.
.....The GoPro codec is natively HIGHLY COMPRESSED and difficult to process, even for beefy machines. That is why they provide the free Cineform tool,( which used to be an expensive professional editing codec), to convert some,or,all of your footage to a more "edit friendly" AVI codec, which will FLY on your machine. HOWEVER, those new AVI files are HUGE.....TRIPLE the original size and requiring a LARGE and FAST disk transfer system. Right now, your single 7200 drive for your media is your SLOWEST component in the chain. The CHEAPEST improvement for you would be to add another MATCHING 2TB 7,200 rpm drive to your existing one and then use the 2 drives to create a fast RAID 0 directly off the mother board to improve the speed of your "media drive". THEN, you MUST insure that this RAID 0 is DILIGENTLY BACKED UP in case of a drive failure in the RAID. This ALSO means you must protect against an unexpected power failure which could destroy the RAID data if the failure happened during a critical write operation.....so,a good UPS is required.
You can OBSERVE how the various components in your system are performing while performing strenuous tasks by bringing up the "task manager" window and watching the CPU load.... if all cores are PEGGED at near 100%, you are "CPU bound". As you are ALREADY overclocked, you can't do anything other than to TRANSCODE your footage to the free Cineform. Your ENABLED GPU can be observed....real time....using the free MSI Afterburner,( or, similar). Certain operations are accelerated by the GPU with PPro....not ALL!! Scaling and some effects will use use the "Mercury Acceleration" while rendering previews AND during export.In some cases, rendering previews,or, exporting can be sped up by TEN TIMES by Mercury Acceleration. Watch the "GPU Usage" on Afterburner to see if the GPU is indeed being used, and if you are "saturating" it to its capacity of 100% with accelerated effects.
Make sure your Windows is fully updated to the current time........make sure your NVidia 760 has the most recent driver and DON'T use the Quadro for now. Set your "Windows page file" to be STATIC on your "C" drive at 24GB. Disable "Hibernation" Set all drives NOT to allow "indexing". Do NOT allow any spinning HDD to be over 50% filled....performance WILL decrease.....make sure any HDD is defragged,( do NOT defrag an SSD ! ). Stop all unnecessary processes, esp. anti-virus programs, while editing. Find out how to best "tune" windows to speed it up at the PPBM 6 and 7 websites.
BE AWARE that the "run of the mill" SSDs use cheaper Sandforce controllers, and are less suited to handle highly compressed digital video files. Samsung PRO models and recent Crucial M550 series SSDs ONLY are recommended for video use. Both these non-Sandforce SSDs maintain high WRITE speeds,( over 400MB/sec), AND maintain their high speeds after reaching their "steady state" condition. Cheaper EVO series and non-Marvell controlled SSDs MAY lose their fast write speeds over time and SLOW YOU WAY DOWN !!! Test your current SSDs by transferring large video files between them and watching MB per second that appears under "details" in the pop up window during transfer. Make sure none are slow.....test them with HD Tune Pro as well.
Certain non-Adobe plug-ins and certain effects may NOT use all the CPU threads well,or, may not use the GPU.....forcing the CPU to do additional work. You will have to identify problem plug-ins,or, effects by switching them on and off to see if any cripple your system.
Your machine is POWERFUL.....go to PPBM7 website and read the "tweakers" page to learn more....then, register for free and TEST your machine with their video benchmark test for PPro. It should do WELL.....AND it will help identify if you have any "bottlenecks" which are impairing your system.
Good Luck !!!!!.....THEN, start using CC 2014.....like Patton said : "...all glory is FLEETING !!"......so is the lifespan of former PPro versions !!!!!!

I have an ipad3(wifi cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

What to do if my pc is too slow for Flash CS6? may i try (and find) older version?

Hi all
I tried the trial version of flash CS6 but my computer is too slow (less than 2 GB of RAM available) and I 'm not able to use it. i need it to make animated cartoons and I do not need to code in order to do it .. What do you recommend me, please? If I use an older version (which one? flash 8? is there a trial version on the site? ) it can work out ? i mean can i consider it valid for my works or is it a point against me for the market?
i want to be sure before buying the product ...
(is this the right place to ask? )
Thanks anyway
Adelina

First of all, check if your machine meets the system requirements for Flash CS6. If yo do, then i will recommend to cleanup your machine. Delete the temp files(Run->%temp%) and empty the Recycle bin.
This should also help.
Restart Windows in a modified mode | Windows 7, Vista - http://helpx.adobe.com/x-productkb/global/restart-windows-modified-mode-windows.html
[Moved the discussion to Flash Pro Forum]

Cs6 3D rendering speed too slow

Similar Messages

Maybe you are looking for