CS6 and GPU fix for MPE hardware acceleration

The problem of this hack not working has been covered in a number of discussions so why raise it again. The solutions that resolved others problems are not working for my card! Tough luck I guess.
My card is the ASUS Radeon HD 7950 CU2 3GD5 V2 and everything I have read says by doing the hack (card name in the opencl txt file) CS6 should offer hardware acceleration for the MPE.
I have the latest drivers from AMD and am using windows 8.1 but GPUsniffer still does not recognise my card. I have tried various forms of the cards name in the txt file, still no luck.
I've posted this because I have run out of ideas to try - any suggstions would be welcome. I have even reinstalled CS6 but no luck. Photoshop sees my card ok!!!!! I feel sure it is something simple that is not set correctly or perhaps the order in which things should be updated/installed. Any suggestions short of signing up for CC rental would be welcome!

Formally I believe these two responses to be correct - Adobe do not officially support my card in Premiere pro CS6. My understanding from many web discussions is that the "not so secret hack" (phrase used by an Adobe employee) can be used but they do not provide official support.
Assuming I am correct I am still left wondering what else to try.

Similar Messages

  • Mac Pro D700 Glitches with MPE Hardware Acceleration

    Downloaded CC 2014 today on my shiny new Mac Pro and tried to do some a  simple cross dissolve transition on text but when I went to render it out to a file it came out as a garbled mess. When I turned off MPE hardware acceleration it seemed to fix this issue. Anyone else having some weird issues with hardware acceleration?
    Computer Specs:
    12 Core Mac Pro 2013
    32GB Ram
    2 x D700 6GB
    1TB Flash Storage

    scottcrozier wrote:
    Downloaded CC 2014 today on my shiny new Mac Pro and tried to do some a  simple cross dissolve transition on text but when I went to render it out to a file it came out as a garbled mess. When I turned off MPE hardware acceleration it seemed to fix this issue.
    Mega-thread on the subject here.  It's a known issue and is being worked on by Adobe, Apple, et al.

  • IPhone 5s intermittently powers off.  I have to do a hard restart (simultaneously hold down power button and home button).  Is there a cause and a fix for this?

    iPhone 5s intermittently powers off.  I have to do a hard restart (simultaneously hold down power button and home button).  Is there a cause and a fix for this?

    Hello TJLapplesupportcom,
    Thanks for using Apple Support Communities.
    Please follow the troubleshooting steps below to resolve this issue you're having with your iPhone.
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Take care,
    Alex H.

  • [svn] 2312: CursorManager: New functionality and a fix for SDK-15029

    Revision: 2312
    Author: [email protected]
    Date: 2008-06-30 17:24:01 -0700 (Mon, 30 Jun 2008)
    Log Message:
    CursorManager: New functionality and a fix for SDK-15029
    * NEW: When the mouse leaves a window/stage where a cursor is set, the cursor no longer sits on the edge of the screen until the mouse comes back into the window, it disappears.
    * NEW: In AIR, when the mouse leaves an active window and glides over an inactive window (without giving it focus) where a cursor is set, the system pointer will be hidden and the custom cursor will appear while gliding over that window, and disappear when you leave that window.
    * FIX: When a cursor is set in a child Window, and the mouse moves over another Window or WindowedApplication, the cursor no longer disappears -- the correct system pointer or custom cursor will display.
    * Fixed listener leaks when switching systemManagers (neither Jason nor I can tell when/why it would happen in CursorManager, however).
    Reviewer: Jason
    Bugs: SDK-15029
    Doc: No
    QA: Yes, here's an exhaustive list of ideas:
    * We'll need tests for the new behaviors.
    * For all tests, we need to try behavior in air AND behavior in (sa)player, and test regressions.
    * Please test SDK-15583 again, all other cursor tests.
    * Take the test case for SDK-15029 and open up TWO MyWindows. Test how the cursors change across all three app windows when they are overlapped like a Venn diagram, with different combinations of custom cursors on and off -- we should have test cases for all of this behavior.
    * Test that custom cursors work properly when the mouse leaves a non-rectangular stage with transparency.
    * Test mouse drag situations -- drag off stage, release, move back to stage; drag off and back onto stage, etc.
    * In my tests, I found a lot of bad behavior in AIR, and player seemed to be fine. Do we have drag and drop use cases for AIR with custom cursors?
    A list of some bugs I encountered:
    * BUG (cosmetic): If the mouse is outside the stage when a cursor changes for the first time (say you toggle a checkbox which sets the cursor using the keyboard), the cursor will appear on the stage in the last known mouse position. When the mouse returns to the stage, everything will start working correctly again.
    * BUG (cosmetic): In AIR, if you drag out, and back into the window, then release, a MOUSE_OUT is fired again over the stage, which is wrong. The mouse coords given are (-1,-1), also wrong. This causes the system cursor to show instead of the custom cursor.
    * BUG: In AIR: if you drag off the edge of a Window with a custom cursor, the cursor will vanish. The MOUSE_OUT event correctly event fires while dragging off the window. Even though the handler tells the system mouse cursor to appear, it doesn't -- might be an AIR issue, since the mouse is still dragging when told to show. If you move back over the active window without dragging, the cursor goes back to normal.
    * BUG: In AIR: if you drag over another window with a cursor, MOUSE_MOVE events don't fire on that other window until you let go. Therefore, a custom cursor in that window does not get drawn, nor does a system cursor. If you move back over the active window without dragging, the cursor goes back to normal.
    * BUG: In AIR: When dragging, off a window, Event.MOUSE_LEAVE only fires after the mouse is let go (unlike MOUSE_OUT), EVEN IF the mouse is dragged back over the window and released over the window. So you're told the mouse left when it didn't.
    * BUG: In Player: I could never get Event.MOUSE_LEAVE to fire when added to the stage in saplayer or browser.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15029
    http://bugs.adobe.com/jira/browse/SDK-15029
    http://bugs.adobe.com/jira/browse/SDK-15583
    http://bugs.adobe.com/jira/browse/SDK-15029
    Modified Paths:
    flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/CursorManagerImpl.a s

  • Service packs and hot fixes for  BusinessObjects Enterprise XI 3.1

    Hello Experts.
    Which is the cronology or order of the service packs and hot fixes for  BusinessObjects Enterprise XI 3.1, or which are tha latest?
    thanks

    For BO XI 3.1, SP 5 is the latest, released in August 2011. You can directly install SP5 if you already have SP3 installed.
    Previous Service Pack is 4.0 and Fix Pack 4.1.

  • Issue with Audio Playback and Uninterrupted Playback in MPE (Hardware Mode)

    I'm currently using Adobe Premiere Pro CS6 with the latest update (6.0.1).
    I'm encountering a very serious problem where the audio from my video clips mute sudddenly when I'm editing and playing back. This happens when other music or audio in the audio lanes (tracks) below that particular 'video clip audio' plays just fine. It literally mutes without any parameter change. This only happens to some of the clips while some plays back normally. I have to reopen my project to fix this and after 30 or 40 minutes of editing it happens again.
    And the Source monitor blacks out when it do edits while I'm playing back video. (It's really disappinting when the most anticipated feature in Premiere CS6 fails to work in my computer) I'm editing in the MPE Hardware Mode and if I switch back to MPE Software mode this problem goes away.
    My Camera is a Canon XF300 and I'm using the 50 Mb/s MXF 422 format. I'm pretty sure there's nothing wrong with the camera because the clips work just fine in CS5.5
    My System Specs are;
    Intel Core i7-2600 3.4GHz
    16GB RAM
    nVidia GeForce GTX 570 2GB (eVGA)
    Windows 7 Ultimate
    Blackmagic Studio Card (Onboard but Disabled)
    Alesis Firewire Audio io26
    4x 1TB Segate Hard-Drives
    Help is really appreciated.
    Cheers Mates!

    How do I do that? And just the project file would be enough?
    And I found another person with the same "Audio" problem as mine but his workaround isn't working for me.
    http://forums.adobe.com/message/4489844#4489844
    I guess you can get a better picture about the problem from that post.
    Thanks Harm for your helpfulness.

  • Why are so many app icons either pixelated or missing?  No photo thumbnails in Photoshop CS6 and missing icons for newly installed applications.

    Even after a clean install of new applications and permission fixes and disk repairs, this problem persists.  Apple must have changed some specifications for thumbnail icons in Mountain Lion.   This is a particularly frustrating problem with Adobe Photoshop CS6.  If you attempt to save a CS6 file in any format, the thumbnail image icon just disappears or appears dark, with no image visible.  I have spoken with both Adobe and Apple about this and no one seems to want to accept responsibility, but I'm beginning to believe the issue is with Mountain Lion, as I did a clean install of a Mountain Lion friendly and compatible app today and the end result was that there is no icon for the application.  The application will run, but you cannot see an icon for it in the dock, only the name.  This is absurd!  Seems like paid "upgrades" are now becoming downgrades.   At least that's how I feel when I actually lose rather than gain functionality.

    this is happening to me too. if i create a photoshop jpeg file it has no thumbnail icon. the file seems to be there by name only?
    pete

  • Itunes artwork display issue and a fix for  'unknown error occured (-50)'

    Too bad they dont have stickies. This would be a great one.
    This is a thorough fix for art work and the -50 error.
    If you see artwork in itunes, first verify that the artwork is in the mp3 tag using a program like "tag and rename" http://www.softdepia.com/tagrename_download1291.html
    If the artwork shows up in tag and rename, then you added it correctly.
    If the artwork isn't displaying on ipod, delete the song and retransfer to the ipod. Next make sure the "view artwork" check box is checked. To do this connect your iPod to iTunes and there will be a checkbox that should be checked to see if you want artwork to show up on your iPod.
    If you get this message -
    The ipod cannot be updated. An unknown error occured (-50).
    And have no artwork at all in you IPOD , dont fret. I am getting there..
    NO you DO NOT NEED to FORMAT YOUR IPOD YET as commonly posted. I have tested and retested the following fix-
    Eject IPOD. Kill ITUNES.
    Backup the following files
    iTunes Library.itl
    iTunes Music Library.xml
    & anything in the Previous Itunes library folder
    and delete them. More info on these at http://docs.info.apple.com/article.html?artnum=93732
    Dont worry, its much easier to recreate the database than to wipe your IPOD.
    Next Start up ITUNES. Plug in IPOD. You now should have a empty database.
    At this time, uncheck copy ARTWORK to IPOD, and when it's done deleting artwork, CHECK Copy ARTWORK to IPOD.
    It now should sucessfully display ARTWORK and not get the -50 error!!
    Now, goto you ITUNES Music folder and drag to the library and it will add you music back in, including your PODCASTS.
    All you need to do is click the RESUBSCRIBE button and you are back in business!
    IF this fails, which i cant DUPLICATE anymore, try this
    http://docs.info.apple.com/article.html?artnum=300248
    Its the DREADED IPOD FORMAT article.
    But you probably wont need it if you follow all these steps.
    Post back if this doesnt work and if it does, give me some credit;)

    Just as an fyi, to shorten this procedure instead of deleting the files i found out you and open the .itl files and delete all the lines in it so its an empty file.
    Then open itunes, and it will rebuild the database with the files from the .xml file.
    This saves you from having to rescan the songs..

  • Missing music, jumbled letters and a FIX for Newsstand

    I have an iPod Touch 4. That being said, the following problems and 1 fix have been found since the 5.0 and 5.1 upgrades:
    1. Under artists in the Music App, no artist appears after the letter 'R'. (they appear and play when I search iPod)
    2. Under artists, and after the letter 'D', the artists cease to match the proper letter.
    What I've done: After cruising the forum for an answer and finding none, I restored my iPod with no success (took a long time). I've added and taken away artists and playlists. I've even thought of sacrificing some sort of small animal (joke) just to be able to get back to where I was before the last 2 updates.
    In fact, I was a little annoyed when the last update didn't fix it.
    That being said, after the 5.0 update and the appearance of Newsstand, I did everything to hide it (Sorry Conde Nast). A solution I found elsewhere was this:
    Form a NEW folder. As it is forming, slip Newsstand in. It takes a few tries but will work. However, once it is inside the new folder, NEVER open Newsstand as it will crash the ios.
    Some help would be nice, and I hope I've helped someone else with the Newsstand issue.

    Just as an fyi, to shorten this procedure instead of deleting the files i found out you and open the .itl files and delete all the lines in it so its an empty file.
    Then open itunes, and it will rebuild the database with the files from the .xml file.
    This saves you from having to rescan the songs..

  • Just downloaded CS6 and got Save For Web error

    I just downloaded Photoshop CS6 and I made a GIF and saved it then realized it was to big so I saved it again with the Colors as 128 instead of 256 and got a "Could not complete this operation. An unknown error has occured." now I can't Save For Web at all. I deleted the save for web preferences and I'm still getting the same error. I'm using Windows 7 Starter btw

    It should work just fine.  Perhaps load the 64 bit version?
    Also, there are problems with gif and save for web so read this http://feedback.photoshop.com/photoshop_family/topics/cs6_gif_save_for_web_error

  • I had PS Cs6 and signed up  for PScc but now i have Cs6 extended, how can i fix this?

    My computer is running windows 7 when the download stopped i have only got Cs6 extended,

    The creative cloud has three version of Photoshop all are Extended  CS6 version 13.1.2, CC version 14.1.2 and CC 2014 version 15.2.2.
    CS6 perpetual  Windows is CS6 version 13.0.1.3 and either Standard features or Standard features and extended features are enabled.
    The perpetual an subscription versions are different  the subscription version has a scripting bug fix not the perpetual version and the perpetual version has some plug-in support that has been removed in the subscription version.  I kept the Perpetual version installed on one machine and installed the subscription version on my other machine.
    CS6 perpetual and  CS6 Subscription versions can not co exists on a single machine.
    If you now have CS6 13.1.3 I think the only way back to CS6 version 13.0.1.3 may be to use Adobe cleanse to wipeout all Adobe applications  then clean out any  Adobe rat dropping that may still be on you system in your windows registry and in your user id application data like Photoshop preferences.   once you do the you may be able to install your old perpetual version of CS6.  The you may be able to download the direct installer for Photoshop  CC 2014 and install that and activate it with a sign in you Adobe User ID that has the cloud subscription

  • IMAC Premiere CS6 and GPU's question. (Updated)

    The only new iMac's which might support GPU CUDA operation in Premiere CS6, are the 27 inch ones using the GTX 675MX or the GTX 680MX video chipset. Neither of these are on the cuda supported list but of course they could be added to the appropriate file to enable them to work. Is there anyone out there successfully using them in GPU acceleration mode? If so please let me know if they do work and which of the two you have. I can then argue my case with the boss.
    Also, is anyone using them with Windows 7? Our Mac's are dual boot.
    Bye Andrew

    Ok, I've upgraded to Mountain Lion now and that hasn't made Premiere any faster. However I've just been looking at the Scratch Disk configuration and they are all set to 'Same as Project'.
    So here's my new question. I have 4 internal HDD's. At the moment the OS and Premiere Pro is on disk 1. Disk 2 is currently recieving my Premiere Pro project files and disk 3 and 4 are completely empty ready for footage or anything else. What is the best way to set up the Scratch Disks and Premiere Pro's Media cache(s)?
    For reference the scratch disk options are currently:
    1) Captured Video - Same as Project
    2) Captured Audio - Same as Project
    3) Video Previews - Same as Project
    4) Audio Previews - Same as Project
    Currently my 'Media Cache Files' are being sent to disk 1 and this is also where my 'Media Cache Database' is located.
    So what should I change?

  • Cheap and effective fix for scratching DVD/CDs in iMacs

    After looking at the slot on the side of the iMac, I couldn't help but notice how sharp the edges of the sides are. That will cause huge problems for everyone of us at one point or another. After reading a number of complaints surrounding this design flaw, I have come to a solution that each one of us can do with little or no trouble at all.
    Cut a 4" piece of electrical tape, preferably the softer vinyl type (Scotch 33+), and slide about 1/4" inside the slot, on the back side of the Mac only since we're about protecting the media side. Press the rest of the tape along the outside towards the back of the iMac. Now take the tip of a butter knife and gently press the tape you inserted in the slot against the rear of the opening. It will create sort of a wrap around bumper.
    This worked for me.

    Hello Dino,
    Thanks for the reply.
    I haven't burned anything using the iMac burner. I have two Plextor external DVD burners attached to the iMac and use them instead since they are much faster. I suppose at some point I will burn a CD or DVD and see what the fuss is all about.
    As for the other "issues" relative to the iMac, I am 100% satisfied with it and do not wish to listen to others complain about their machines so I have, for the most part stayed away from the other discussions.
    After all, these are machines. I'm just tired of all the bit**ing and moaning about a mass produced piece of hardware. There are expectations, and of course some of them are not agreeable to others, but I am not a fan of publicly bashing a manufacturer. Apple is aware of each and every issue it faces and each one results in a learning curve for the next generation. If this thing is such a piece of crap, then don't buy it. There are choices one can make and one of those is to not buy an iMac. For the record, I would buy another one if I needed to.
    ....off my soapbox.
    Thanks.
    RSR

  • Average GPU usage for MPE?

    Hey fellas - I just wanted to ask an informal survey for those that have CUDA enabled. What's your average GPU usage during rendering?  I just ran the GPU Meter gadget and noticed that the GPU doesn't go high at all (<10%). Is that normal?

    Depends on the footage, the rendering required (effects used) and most importantly on the system confuration.
    If you have the engine of a Lamborghini Aventador (fast CPU/GPU) but coupled with the gearbox of a 30 year old VW Beetle (memory) or a set of wheels from a Fiat 500 (disk) it will not run at full power and speed.

  • Quick and easy fix for linux shell script in 1.2.1.32.13

    Hello, right after installing sqldeveloper in my home directory and linking the script in my bin dir I found a small problem with the shell script for linux.
    I downloaded the "Multiple platforms" zip file.
    here is the fix:
    change "dirname $0" to "readlink -f $0 | xargs dirname"
    with this fix, linking to the shell script won't cause the script to use the bin dir instead of the real directory where sqldeveloper is installed.

    This symptom occur because a 64-bit process that runs on a computer that is running an x64-based version of Windows cannot load the 32-bit .dll files that are required by some program features.
    You may try the following work around:
    You must use the 32-bit version of Windows Explorer. The 32-bit version of Windows Explorer is located in the %windir%\Syswow64 folder on the computer that is running an x64-based version of Windows.
    To use the 32-bit version of Windows Explorer, follow these steps:
    Click Start, click Run, type the following in the Open box, and then click OK:
    Drive_Letter:\windows\syswow64\explorer.exe /separate
    Note The placeholder Drive_Letter represents the drive where the x64-based version of Windows is installed.
    For more information:
    Some Windows Explorer extensions and some Control Panel items are not displayed on computers that are running an x64-based version of Windows
    http://support.microsoft.com/kb/895561#appliesto
    Now check if the issue is resolved.
    You may want to try the following steps:
    PDF thumbnail view via the Acrobat reader:
    1. Run Acrobat Reader. In Reader, click File > Open and navigate to the folder(s) containing your PDF file(s). If necessary, move the slider to show all your PDF files.
    2. Cancel out of Open and exit Reader.
    3. Open Windows Explorer and navigate to the folders(s) containing your PDF file(s).
    4. Click Views and move the slider until you see PDF thumbnails.
    Thanks and Regards:
    Sanjay Manju Suman
    Adobe System Inc.

Maybe you are looking for