CS6 audio won't play on sequence copied from another project

I copied a sequence from Project 1 and pasted it into Project 2 yesterday. It worked fine yesterday. Today I tried to open up the sequence, and the audio was "browned out." I right clicked on "reveal in project" and the correct audio file came up.
Other sequences that I did not import are playing back fine.
What's up?
https://www.dropbox.com/s/2uu7gugk866yeug/browned%20out.png

In case someone else finds this thread - the fix was to select all the audio tracks, right click on them, click on Audio Channels, and change the source channel to whatever the available option was. In a couple instances, I switched to "None." and it turned green, but was inaudible. Then I did it again and switched back to whatever the other option was, and it played again.
Thanks!

Similar Messages

Audio won't play on MPEG files from camera?

I'm having issues with my new video camera. I want to use my final cut express to edit the videos, but the audio on the video files won't play. The videos play just fine, just no sound. I've turned the volume all the way up on my mac, but still nothing.
Any suggestions to make the audio work?
(I'm not the most familiar with computers, so simple/specific instructions would be best)

You have to separate out the audio and video tracks (referred to as "demuxing") of an MPEG-1 or MPEG-2 file before you import it into FCE. Try MPEG StreamClip to convert the MPEG files into an editing format (DV Stream, for instance). If your camera outputs MPEG-2, you'll also need the MPEG-2 Playback Component.
Hope this helps.

Slide size issues with copy from another project

Working with Captivate 4. I have a completed project where I have a slide I would like to re-use in a new project. The recording options for each project are the same - full screen recording. The image is being cut off all the way around the when I 'Copy Slide' in Project A and 'Paste Slide' in Project B.
If the layout size is the same, why is the image being cropped/adjusted in the Paste? Is there any way to adjust the size of the image when pasting an entire slide into a project?
Thanks in advance,
D

Hi again
Seems odd. But I may have a workaround. What if instead of copying the slide, you simply insert a Blank slide in the new project? Then you copy the background of the slide from the older one and paste as background into the newer? Results the same then or what?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files

I dowlnloaded Premiere Elements 4, and when I import mp4 files, the video plays but the audio will not. I've also tried to import .mov files, and an error message pops up that says "Codec missing or unavailable." I downloaded the latest version of Quicktime, but that didn't change anything. The files will play back on the video camera, but I"m having trouble with them on my computer. The audio on the mp4 files plays in Quicktime, but not the video, and vice versa when I import them into Elements. Any suggestions?

Does Quicktime Pro also edit .mov files on a PC?
Date: Wed, 27 Nov 2013 07:53:14 -0800
From: [email protected]
To: [email protected]
Subject: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    Re: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    created by Steve Grisetti in Premiere Elements - View the full discussion
Premiere Elements 4 pretty much works with tape-based digital video. That would be video from a miniDV or HDV tape-based camcorder. It doesn't handle other formats very well.
If you plan to edit MP4s, you definitely want to upgrade to a more current version of the program. If you can't install a current version of the program, you may need to address issues on your computer (such as an outdated operating system or underpowered hardware configuration).
Short of that, you could buy Quicktime Pro from Apple for $29. It will edit MP4s, even on a PC platform.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5879880#5879880
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5879880#5879880
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5879880#5879880. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Help!! AVI audio won't play - Premiere Pro v.7

Hi!
I captured footage from my DV camera into Windows Movie Maker in the form of a DV-avi. (I use WMM because Premiere crashes when I try to capture DV video). And when I import the AVI into Premiere Pro v.7 the audio won't play in the project window. However, when I scrub the slider back and forth the audio does play (kind of).
I have never had this problem before. I've captured video many times and this never happened.
I tried re-capturing it 6 times, but still the audio doesn't play (except when I scrub).
Is there an option I clicked accidentally?
Any help would be really great.
Thanks a lot!
-R

John T Smith wrote:
I think WMM creates type 1 files and Premiere needs type 2
You might Google for a converter
You might also use the free http://www.headbands.com/gspot to find out the file details, and report back so someone may be able to help
I installed that program. Very helpful and interesting. Thanks for the link.
I assumed, like you, that I had simply captured the AVI files as Type 1. But I guess they are Type 2, after all.
I don't know if this helps, but the AVIs play just fine in Quicktime, Windows Media Player, WMM and Winamp.
Thanks again for your help.
Here is the information gspot provided:
FILE_NAME                      tape6_raw0001.avi
FILE_NAME_WITH_PATH            O:\EDITING\In the Woods\Tape 6\clips\tape6_raw0001.avi
FILE_SIZE                      90,872,392
CONT_AUDIO_STREAM_COUNT        1
CONT_BASETYPE                  AVI(.AVI)
CONT_BYTES_MISSING             0
CONT_INTERLEAVE_ALIGN
CONT_INTERLEAVE_PRELOAD
CONT_INTERLEAVE_TIME
CONT_SUBTYPE                   OpenDML (AVI v2.0),
CONT_TOTAL_BITRATE             0
VIDEO_ASPECT_CONVERT_AVI1      Resize to 656 x 480 (Use +/- for other target sizes)
VIDEO_ASPECT_CONVERT_AVI2      Crop off any non-picture areas, if req'd
VIDEO_ASPECT_CONVERT_CVD1      Resize to 360 x 480 ( w:[1/2] h:[1/1] )
VIDEO_ASPECT_CONVERT_CVD2      Trim 4 from each side for 352 x 480
VIDEO_ASPECT_CONVERT_DVD1      No resize req'd
VIDEO_ASPECT_CONVERT_DVD2      No cropping req'd
VIDEO_ASPECT_CONVERT_SVCD1     Resize to 480 x 480 ( w:[2/3] h:[1/1] )
VIDEO_ASPECT_CONVERT_SVCD2     No cropping req'd
VIDEO_ASPECT_CONVERT_VCD1      Resize to 360 x 240 ( w:[1/2] h:[1/2] )
VIDEO_ASPECT_CONVERT_VCD2      Trim 4 from each side for 352 x 240
VIDEO_ASPECT_SOURCE_MATCH      DVD
VIDEO_ASPECT_TYPE_NTSC         NTSC
VIDEO_ASPECT_TYPE_PAL
VIDEO_BITRATE                  28771
VIDEO_CODEC_NAME               DVC/DV Video
VIDEO_CODEC_STATUS             Codec(s) are Installed
VIDEO_CODEC_TYPE               dvsd
VIDEO_DAR                      1.333
VIDEO_DURATION                 0:24.291
VIDEO_FIELDS_PER_SEC           59.940
VIDEO_FRAME_COUNT              728
VIDEO_FRAMES_PER_SEC           29.970
VIDEO_H264
VIDEO_MPEG2
VIDEO_MPEG2_3X2
VIDEO_MPEG2_BFF
VIDEO_MPEG2_I_L
VIDEO_MPEG2_PPF
VIDEO_MPEG2_PROG
VIDEO_MPEG2_TFF
VIDEO_MPEG4
VIDEO_MPEG4_BVOP
VIDEO_MPEG4_GMC
VIDEO_MPEG4_NVOP
VIDEO_MPEG4_QPEL
VIDEO_PAR                      0.889
VIDEO_PICS_PER_SEC             29.970
VIDEO_QF                       2.778
VIDEO_SAR                      1.500
VIDEO_SIZE_X                   720
VIDEO_SIZE_Y                   480
AUDIO_BITRATE                  1024
AUDIO_BITRATE_TYPE
AUDIO_CHANNEL_COUNT            2
AUDIO_CODEC                    PCM Audio
AUDIO_CODEC_STATUS             No Codec Required
AUDIO_MPEG_STREAM_ID
AUDIO_MPEG_SUBSTREAM_ID
AUDIO_SAMPLE_RATE              32000

Hype widget; audio won't play when previewing on iPad

Hi,
I've come across a strange 'bug' in iBooks Author. Hope someone can help.
I made a widget using Tumult's Hype software. It has multiple scenes, audio and animated text. When previewing the widget in Hype everything works fine. But here comes the strange part;
When I insert the hype widget in an empty iBooksAuthor book the animation and audio works fine when previewing on my iPad2. But when i insert the widget in my iBook, wich has already ten pages filled with text, reviews, etc., the animation work, but the audio won't play when previewing on my iPad.
People from Tumult helped me, but were not able to fix this.
So in an empty book the widget from Hype works fine, but when inserting the widget in a book that has some pages the audio won't play! How can i fix this?
Thanks for the support!

Hi,
I've come across a strange 'bug' in iBooks Author. Hope someone can help.
I made a widget using Tumult's Hype software. It has multiple scenes, audio and animated text. When previewing the widget in Hype everything works fine. But here comes the strange part;
When I insert the hype widget in an empty iBooksAuthor book the animation and audio works fine when previewing on my iPad2. But when i insert the widget in my iBook, wich has already ten pages filled with text, reviews, etc., the animation work, but the audio won't play when previewing on my iPad.
People from Tumult helped me, but were not able to fix this.
So in an empty book the widget from Hype works fine, but when inserting the widget in a book that has some pages the audio won't play! How can i fix this?
Thanks for the support!

Ipod Nano won't play any songs downloaded from MySpace pages...

My first generation Nano was initially sent back to Apple due to the battery losing it's charge to quickly. They sent me back what appears to be a replacement Nano and now this one won't play any songs downloaded from MySpace pages of bands, shared from friends (unprotected mp3 files) or otherwise downloaded from the internet.
Whats unusual is that any songs imported from a CD to the Nano play fine as do any songs purchased from iTunes. I know Apple has stated that any files the user wishes to play on their iPods will play as long as the format is compatible. (All of these songs in question played on the original Nano and the problems started when they said they fixed it and sent it back (although it is missing the engraving which to me indicates they gave me a refurbished Nano). My Applecare runs out in mid-October so I need to figure out what is wrong. I sent it back a second time and they told me they couldn't recreate the problem so they just updated the software and sent it back.
Someone suggested that some iPods have a part of the firmware activated (which Apple may have been testing) that prevents any non-ITunes store music or music no t off an original CD to fail to play.
When attempting to play downloaded songs from sites like Purevolume and MySpace the iPod plays for a few seconds then shuts down and restarts itself, all of these songs worked fine before Apple took it in for service.
Any suggestions?

Hello,
I have exactly the same problem. It`s so annoying.
I did a little bit research on this discussion board and this problem seems to be known for quite a long time. It`s confusing me Apple is not able to fix that prob or give customers quick introduction to resolve the prob.
I am currently on vacation in Florida and just bought the new iPod 30 Gig. I transfered already songs from my music cd. That worked fine.
I bought 2 music video files, synced them with no error to the iPod, but it only shows me a black screen when I want to start the video on the iPod itself. itunes plays the files with no problem.
Any ideas how to fix it??
DELL Latitude D800 Windows XP Pro

Importing sequence from another project, can't connect to dynamic link

I'm trying to get another sequence from another project into this one (mostly to be able to copy over a specific edit from that without remaking it) and when trying to do so, the system, as per the usual, tries to connect to the dynamic link server, but stalls on the connection screen for some time. One time it simply told me that it could not connect, and another time I got an "unspecified draw error". I'm using a PC. Any help that anyone could provide would be greatly appreciated; I've never run into this issue before, and have had to copy edits between projects multiple times.

Hi Boonslayer,
Wrong forum. Moving to Premiere Pro forum.
Kevin

Import part of the sequence from another project

I'm working on about the fifth edit of a project and now want to move part of a sequence (about 40 clips) from one project to another. I understand I could import the entire sequence and then delete all but the portion I want, or delete all but the portion I want and then import it as the entire sequence - but this might take a while. Anyone know of a quicker way to import a portion of a sequence from one project to another. Many thanks

Thanks guys,
Would have reported back earlier but have been on other adventures. FYI, never get involved in filming medieval stuff, they're insane. But back to the project in topic, unfortunately the lasso / copy from one project to another certainly did not work in this instance. However thanks to Craig Howard @ # 1. This is probably the only method that will work in this example and even so I'll report on it's outcome later.
Thanks guys!

How to create a basic pay wage type without copying from another wagetype

Hi Gurus,
How to create a "New Wage Type" without copying from another wagetype?
& i want this wage type "Non Taxable" as per my organisation requirment.
pls send me config docs on my email id. Pls it is very urgent
Email: [email protected]
Pls Help me
Regards
MHPO

Hi Ram,
Thanks
One more thing should i create "Non taxable payment wage type" in Basic Pay.
in Basic pay there is no any wage type copy Non taxable Wage type but Additional Payments there is one Copy Wage type name is "M400 Non taxable payment"
i check the all config related setting related to M400 non taxable payment
can i copy in Basic Pay any wage type & create new wage type (xyz)
& i change all setting eg processing class & all is similar in (XYZ) =M400
its is ok or not

User copy from another client

hi guru
how can user copy from another client
thanks

Rajesh,
If you are looking for copying users on same server to another client, please follow the below steps:
Logon to target client.
Execute Tcode SCCL. In SCCL choose source client and choose profile SAP_UONL.
Now select "Schedule as a background job"
This will copy only users to your target client.
Thanks
LK

Audition CS6 Mac Won't Play Audio Interface Preference Issue

Hi Im having some problems with Audition CS6 mac. I have the full master collection and only encounter this issue with Audition.
On my Macbook pro
I use my internal speakers/audio or a vrm box audio interface, occasionally Ill use a fasttrack pro to record. My problem occurs after I use the audio interface. When I next open Audition set up for the built in speakers/audio and hit play, it says playing but nothing plays.
When I open Audition after using a external interface going back to my built in macbook audio I get a pop warning that:
"Your systems audio hardware settings have changed. Would you like to go review Audition's audio hardware preferences?"
I click yes, go to that everything is set for internal mac audio,
hit play, says playing bottom left, then just sits there.
I noticed today when it did this, that it if I go into the Audio Channel Mapping Preference, it shows what ever audio interface I used last on the output/not working on it. I am unable to change theses settings.
I reboot after changing audio interfaces, etc.
I can delete my Audition preference files in my user folder and it functions again, but that also entails rescanning all plugins which takes some time.

I just found that removing MachineSpecificSettings.xml in the user/preferences/adobe/audition/5.0/ folder will get it to play again under the internal audio settings. And when I look at channel mapping it shows the internal audio.

Premiere pro/audition bug? Mixdown file won't play in sequence

Howdy.
Never had this happen before, so I thought I'd ask you academic types what's going on.
I created a sequence in PP that contained multiple audio (wav)/video files. I exported the audio to Audition, balanced the amplification, declicked, popped, etc. Created a mixdown of the files and exported (wav). I imported the mixdown to PP and placed it into the sequence (I've done this thousands of times before). Unfortunately, there were no waveforms on the file and no audio can be heard.
However, if I open the same file in the source monitor the waveforms are there and the file plays as it should. I can also open and play the wav file in media play, for example, and everything appears to be fine.
Any ideas on why it won't play in the program monitor/timeline/sequence?
Thanks

Oh well, not a big deal. I was able to use the clip by creating a new sequence, dragging from source monitor to new sequence, then copy/paste from the new sequence to the sequence I needed.

Video and audio won't play in Itunes...just a gray screen

i put my digital copy of the hangover on itunes but it won't play. it says it is playing but it's a gray screen and no audio. whats wrong??? it plays on my ipod touch fine though.

There is an issue with the latest iTunes version that is causing downloaded movies/songs from not playing on your computer, but should work on your iPod. Until Apple releases an update that'll fix this, this problem will probably not go away.

Audio won't play in Premiere, but plays in QT, FCP, and Adobe Bridge.

Hi everyone,
I'm normally pretty good at troubleshooting, but this audio issue has me scratching my head. A cameraman had DVCPro tapes transferred to QT movies. All the clips playback fine if opened with QT, FCP, and Adobe Bridge. Import these clips into Premiere and there's no audio. Nothing shows up on waveform- there's nothing there.
I would switch to FCP, but I already started the project in Premiere (CS 5.5) with earlier footage- which were mxf files right off the P2 card. That works fantastic. The footage I'm having an issue with was footage that was just shot recently on DVCPro tapes- so switching to FCP isn't the most time efficient. But I'll do it if I have to.
What confuses me the most is that the clips play back fine in Adobe Bridge, so I don't think it's a codec issue.
Thanks in advance for any help or advice getting to the bottom of this.
Erik

I had a similar problem, I'll tell you how I solved it. Understand that I am a newbie at video editing and Premiere Pro. I shot videos on a DSLR (.mov) and then transferred them to my computer. I then imported them into Premiere CS6. The videos played fine, and the sound bars indicated that audio was playing, but there was no sound. The clips I imported played fine in Windows Media Player. I did everything suggested on the forums, but to no avail. Then I thought of something no one else had suggested, and it worked!
I ordered my Rain Stratus computer already set up with Premiere CS6 installed. When I opened a new project, it by default chose Black Magic Design presets, since that is the video card I have. Being a newbie, I just went with that. But since the video I was importing was not captured by my Black Magic video card, it was the wrong choice. It took awhile to figure out, but I finally realized I needed to choose Digital SLR as the sequence preset when I created a new project. Then the audio worked!
One more thing I had to do, though, before it worked: in PremierePro, go to Edit/Preferences/Audio Hardware. I had to change the hardware from Black Magic Audio to Premiere Pro WDM Sound, click ASIO settings, choose my speakers, and then check the box marked "device 32-bit playback" (even thought I have a 64-bit computer.)
I hope that helps someone else from going through the same frustration.

CS6 audio won't play on sequence copied from another project

Similar Messages

Maybe you are looking for