CS6 Beta asks for disk during install

I downloaded the CS6 beta to a new folder in my Program Files folder on my hard drive.
I did a complete shut-down and cold restart on the PC.
I closed all other programs and disabled all the memory-resident ones except my antivirus.
I started the CS6 setup.  At roughly 28% complete, the installer stopped and displayed the message:
"Please insert disk Photoshop CS6 to continue"
Clicking 'Continue' brought the same error message screen back.
I would like to try CS6, but how do I get it installed?

My OS is 32-bit XP Pro SP3 with all critical updates applied.  The only other Adobe product installed is Adobe Reader X.
The only thing you did differently is to put the downloaded file and the extracted files on your Desktop.  I downloaded mine to a unique folder in my hard drive Program Files folder, extracted them there, then ran the Installer.
I also selected 'Try' instead of 'Buy' and created a unique Adobe login ID for myself.  After the first failed attempt, all subsequent installation attempts 'recognized' my Adobe ID and only asked me to confirm it.
Since my last post, I've also tried copying the extracted files to a DVD, then running the Installer from the hard drive with the DVD in the DVD drive (Failed) and I tried running the Installer directly from the DVD drive (Failed).  In each attempt, it got to 28% complete, then began asking for the Photoshop 6 disk.
I may try to install CS6 Beta on my Win7 system, but I really dislike using that PC for beta versions of programs.

Similar Messages

  • Trial install asks for disk to install - CS6 Master Suite

    I installed the Master Suite collection quite a while ago on a previous computer with no problem. Now though, I'm being asked for a disk just to go through with a trial installation.
    I'll clck on "trial" installation choice. I'll click on "next" and it'll look like it's going to install. However, after a few moments, it'll stop and ask me to insert the disk to continue. It's a trial, so what disk?

    what os?
    what are the file names/extensions that you downloaded and are they all in the same directory?

  • Adobe Premiere Trial Asks For Disk During Setup

    This is not the first time I've downloaded a trial. When it was installing, it asked me to insert disk 1. But since it is a trial, I don't have a disk.  Thanks for any help.

    No. I have not installed it before. Maybe I should also say that I have gotten the setup off of a disk from my laptop.
    Good. I was afraid that you had installed it on this machine previously.
    Did you Extract the archive file, the downloaded file, to the same drive, that you are installing to? I would Extract, including the full folder structure, to my C:\temp, and then install to C:\ [Chosen Folder] from there. Usually, the Extraction process defaults to include the entire folder structure, but some extraction programs might omit that important part. When Extracted, did you get the full folder structure?
    Good luck,
    Hunt

  • Subscription to Illustrator is asking for disk in install??

    I just subscribed to Illustrator and am trying to install it. During the install process, it asks me to insert disk to continue!? There is no disk!? I am so frustrated:(

    This appears to be a duplicate thread.  Please refer to http://forums.adobe.com/thread/950983

  • CS5.1 Free Trial asking for Disk during Installation

    I've downloaded the CS5.1 onto my computer, and saved it in my flashdrive.  While trying to install it, before it could finish, its says: "Please insert Disk Photoshop CS5.1 to continue."  I don't have a disk; I am downloading the free trial so I can get the hang of it and familiarize myself before purchasing the actual thing.    I am using a Windows 7/Vista, not Mac.  Does anyone know what I am doing wrong? Someone please help me.  I am tired of downloading and installing over and over again.  I want to use photoshop already.
    Thanks.

    You might be installing it directly from flash drive...hence copy the fies to the computer and then run the installer.

  • Downloaded software asking for CD during install

    I'm moving my CS5 from my old desktop to a new laptop. I've switched off the current installation and moved the downloaded installation file to the new machine, expanded it and now am installing it. It accepts the license number and starts the install then gets to a point when it requests I put a CD into my CD drive. It dosn't give me an opportunity to point to the folder where the expanded files are nor the original downloaded file, so I can't complete the installation. How do I get round this?

    Hi Paul,
    Please  try re-downloading CS5 from the direct download links available at : http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
    and then try installing it on the new computer.
    But make sure you follow the important steps mentioned on the page before initiating the download.

  • I purchased DreamweaverCS6, installed ok then registered it on-line. Computer   running slow, malware sorted it out, since I re installed CS6, it asks for   registration, puts up 30 day trial,Flags up errors java.

    I purchased Dreamweaver CS6, installed ok then registered it on-line. Computer
    running slow, malware sorted it out, since I re installed CS6, it asks for
    registration, puts up 30 day trial,Flags up errors java.

    Hi Jon,
    Dreamweaver the following errors show up in the JavaScript.Log. I deleted the .dat file but no difference. I am not so confident in how to delete the preference file. I have been following the instructions (see link)
    https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
    Windows:
    ~Users\[user name]\AppData\Roaming\Adobe\Dreamweaver CC 2014.1 (folder)
    \HKEY_CURRENT_USER\Software\Adobe\Dreamweaver CC 2014.1 (registry entry)
    When Dreamweaver launches, it creates new preferences files and folder.
    How do I get rid of these errors?
                                            DW JavaScript
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\MMinit.htm
         lineno: 1698
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\AdvRs.htm
         lineno: 12
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\BridgeTalkInit.htm
         lineno: 19
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\BusinessCatalyst.htm
         lineno: 46
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\ICEInit.htm
         lineno: 57
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\RecordsetFind.htm
         lineno: 12
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\SpryInit.htm
         lineno: 53
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\ASP.NET_Csharp.htm
         lineno: 436
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\ASP.NET_VB.htm
         lineno: 477
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\ASP_JS.htm
         lineno: 622
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\ASP_VBS.htm
         lineno: 624
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\ColdFusion.htm
         lineno: 458
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\JSP.htm
         lineno: 491
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\PHP_MySQL.htm
         lineno: 384
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\XSLT.htm
         lineno: 302
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename:
         lineno: 15
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename:
         lineno: 15
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename:
         lineno: 14
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Commands\_onOpen.htm
         lineno: 29
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Menus\MM\LiveView.htm
         lineno: 32
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Menus\MM\Browser_Controls.htm
         lineno: 31
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Toolbars\MM\AddressURL.htm
         lineno: 14
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Toolbars\MM\BCC.htm
         lineno: 32
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Toolbars\MM\WrapTag.htm
         lineno: 45
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Toolbars\MM\EditTitle.htm
         lineno: 39
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Shutdown\BridgeTalkexit.html
         lineno: 18
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Shutdown\TeamAdminTempDelete.html
         lineno: 37
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    Original message----
    From : [email protected]
    Date : 31/03/2015 - 16:08 (GMTDT)
    To : [email protected]
    Subject :  I purchased DreamweaverCS6, installed ok then registered it on-line. Computer   running slow, malware sorted it out, since I re installed CS6, it asks for   registration, puts up 30 day trial,Flags up errors java.
        I purchased DreamweaverCS6, installed ok then registered it on-line. Computer   running slow, malware sorted it out, since I re installed CS6, it asks for   registration, puts up 30 day trial,Flags up errors java.
        created by Jon Fritz II in Dreamweaver support forum - View the full discussion
    Try renaming the configuration folder that holds the .dat file first, before attempting to restore preferences.
    Many times that will take care of it without having to do all the work required after a pref-reset.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7391793#7391793 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7391793#7391793
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Dreamweaver support forum by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • LTI ask for disk options in the Wizzard ?

    Is it possible to somehow got LTI Wizzard to ask for disk configuration options ?
    Some PC in my enviroment dont always stick to Disk0 bring the SSD or Disk1 being DADA disk, some people have new SSD disk added as
    Disk2 and want to keep disk0 and disk1 untuched.
    So i was hopeing there is a way to get LTI Wizzard to show list of availble disk with some info about them like manufacturer and/or type and/or size, so during deployment i can pick the disk to which disk Windows should be installed.
    is this possible and of yes how?
    extra info:
    MDT 2013
    Windows Server 2012
    Deploying Win7 and Win8.1

    Unfortunately I think you will have to physically connect the SSD so that it is Disk0.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Need Disk 2 for10.4.2  got stuck asking for disk 2

    I purchased a used Imac G5 with 10.5 on it. I need 10.4 for a billing program I use. The Imac G5 install disk 1 came with the G5. I started the install and got 3/4 done, then it asks for disk 2. Bad news? No disk 2. The previous owner said he never used the disk and there is only the one I have.
    Whenever I boot the computer, it turns on and asks for Disc 2. Is there any way to get in and take off the 10.4 update I did? That way I can go back to running 10.5 [I have no disk for 10.5 it was just loaded on the machine]. I can boot the computer using my external drive that has 10.4.11 on it. Any help is much appreciated.
    I had to purchase this G5 because my Imac G4 15 flat panel was dealt a double power surge on Monday and died. Luckily Mac folks able to make a complete copy of the contents on the hard drive.
    Thank you in advance, it has been quite a week.

    You can call Apple Customer Relations 800-767-2775 and they will send you the install discs for a small fee.
    Do call them and have the serial # handy. But someone a couple of weeks ago, reported that Apple said they didn't have any more. (It was for iMac PPC (2005 I think). So if you get some Post back.
    One thing you can try with the one disk, is before the install starts, click on the custom button, and uncheck as much as possible. When it ask for #2, I think its looking for applications to install and maybe X11. Good luck
    Message was edited by: Dakota

  • Photoshop Elements needs repair.  After repair it asks for disk 1.  I only have one disk and the case I got the program in has space for one disk.  What should I do?

    I must have gotten a corrupted sector on my disk drive I place my Adobe Photoshop Elements 6 CD in the drive and it asked to install or repair or uninstall.  I clicked repair and after a minute it asked for disk 1.  I could not find a disk one and my case only has space for one disk.  What should I do?
    Jim Hamilton.

    PSE6 is a very old program (more than 6 years old) so what exactly are you trying to do?  Have you got PSE6 already on your machine?  If so, to uninstall it, all you need to do is to go to the Windows Control Panel and uninstall it under Add/Remove programs icon.
    If you are trying to install it again on top of what is already installed then the best way is to uninstall it from the machine before installing again after rebooting.  Also, if the disk happens to be damaged then try copying the contents from the disk to a temporary folder on your machine and then try installing from that temporary folder by clicking on the setup.exe file.
    Hope this helps.

  • Why isn't the installation asking for disk 2

    why isnt the installation asking for disk 2.  I have loaded disk 1 for photo shop 10 elements and the NEXT button takes me to a program maintenance screen where I am told if I proceed with the NEXT button the only indicated action is  Remove Adobe Photoshop Elements 10 from your computer.  The header on the screen is still Adobe Photoshop Elements 10 - Setup.  I have photoshop 9 on my computer.

    It will only request Disc 2 if you have requested to install the Premiere Elements 10 trial.  If you do not wish to install the trial there is no need to insert disc 2.

  • Why does Acrobat X CS6 keep asking for a license number?

    Why does Acrobat X CS6 keep asking for a license number? When I enter it, it's declined. I have the suite from school and loading it at home as allowed as the teacher.

    Contact S&T support if you have specific issues.
    Mylenium

  • After Download, asks for disk in order to install.

    After downloading Adobe Photoshop Elements 9 from the Adobe website, after entering the serial number and going through all the pre-install configuring, it then asks for the disk to be inserted before it will install. There is no disk as this is a downloaded program, and is not being installed from a disk but from the downloaded disk image. How do I get it to install?

    After having tried to get this to install 5 different times, I thought of a possible way to do it, but when I went to try it out, never got that far because it simply installed on this try.  I have no idea why it suddenly installed, but 4 hours later and on the 6th attempt, it did. I made no system upgrades or other installations during this time, so it wasn't anything new on the computer that made it work. The only thing I did differently is that I didn't shut down Firefox during the install. All the other times I followed Adobe's instructions and made sure there were no programs running during the install. Could that be the reason?

  • Encore CS6 is asking for a Serial Number when I have Creative Cloud

    I have the same problem identified here:
    http://forums.adobe.com/thread/1024884
    I am running Windows 7 on a new Dell Vostro, have a subscription to Creative Cloud, have never installed a trial version of the software, and recently installed Premier Pro. The first time I try to run Encore, I get the two screens shown in that thread and repeated here:
    "Adobe Encore CS6 cannot run in trial mode. Please relaunch the application and provide a valid serial number."
    "Adobe Premier Pro. Provide a serial number."
    I had previously got the problem identified here:
    http://helpx.adobe.com/premiere-pro/kb/missing-sequence-presets.html
    Following the recommendations fixed the problem, but still Encore has the same issue.
    When I access this URL:
    https://lm.licenses.adobe.com/
    I get the message:
    "Congratulations! You have successfully connected to Adobe License Management Server."
    It appears this is a common problem, but there does not seem to be a common solution. For example, here:
    http://forums.adobe.com/message/4677807
    and
    http://forums.adobe.com/message/4589055
    I checked and have no "Hosts" file.
    Further, here:
    http://forums.adobe.com/message/4677888
    I have found that waiting or rebooting the PC does not fix the problem.
    Lastly, I tried that proposed here:
    http://www.seangw.com/wordpress/2012/08/help-photoshop-cs6-asks-for-serial-number-after-si gning-up-for-creative-cloud/
    And that did not work either.
    Illustrator, Photoshop, and Premiere Pro all work fine.
    So, what is the solution?
    Update, 2012-11-06. I spent 30 minutes on a chat session with Adobe support. The support person told me emphatically that Encore is not part of Creative Cloud and can be obtained only by buying Premiere Pro and not from the Creative Cloud subscription. To prove the point, the support person pointed me to this page:
    https://creative.adobe.com/apps
    Now on that page, Adobe has done something clever and stupid. If you view the page with XP (for example), it does not show Premier Pro because Premiere Pro works only on a 64 bit OS. If you view the same page under Windows 7 it does show Premiere Pro. I think it would be better if Adobe showed the application (possibly greyed out) with a note that it cannot be installed on the PC that is viewing the page. Well, I was having the chat on my laptop (running XP) and I guess the support person was also on XP so the case was proved!
    But I sent him a link to this page:
    http://www.adobe.com/products/creativecloud/tools.html
    However, the support person told me I needed to contact sales. I called them and asked the support guy to wait on the chat session until I had an answer. The lady in sales said that Encore is definitely included in Creative Cloud. But as I was about to relay that information to the support person, he ended the chat session!
    The pleasant lady in sales said she would transfer me to phone technical support. I was on hold for 60 minutes and had to quit to go and do a task.
    Perhaps this will be resolved and I shall update this thread ...

    I got help with this problem.
    You only need to sign out from the creative cloud. Go to preference, sign out. Open Premiere Pro CC, help sign out.
    Then re-open premiere pro cc and sign back in, and you should now be able to open encore as well!
    Worked for me!

  • Asking for disk 2???

    I had the problem where some time ago I set up a version cue server. I forgot what password i used and according to all that I read I had to unistall version cue and then reinstall it. I went to my adobe home and downloaded my web package that I bought online and used that uninstaller to remove the version cue software. However, when I went to reinstall the software it asks me for Disk 2? I am working from a down load??? where I am to get disk 2?
    Anyone have any ideas?

    It will only request Disc 2 if you have requested to install the Premiere Elements 10 trial.  If you do not wish to install the trial there is no need to insert disc 2.

Maybe you are looking for

  • Just bought a Sony A7.  .ARW files not being accepted in LR 5.2.

    I just bought a Sony A7, but when I tried to import the files into LR (v. 5.2) it says that the preview is not available on import.  I was under the impression that with LR version 5.2 I would not need a .DNG converter, but now I'm not sure what I ne

  • XML Portal Bug ??!!

    Hi, I'm writing this XML and XSL code and it's running perfectly on "XMLSPY" but when i use it on Oracle portal I receive the error the page could not be displayed plz fine the XML and XSL file hereunder: -----XML----- <?xml version="1.0" encoding="I

  • Use NeoSpeech or MS SAPI 4/5 speech packs with Captivate

    We were a astonished that Captivate only supports english text-to-speech although it is sold in other language versions. We require French TTS support for our project. Is it possible to use an installed language package, either from NeoSpeech (which

  • Simple (I hope) Correlation Set question

    Hi, I have three composites A, B and C Composite A calls Composite B Composite B may call direct back to A, or it may call C Composite C will always call back to A I need to use Correlation Sets to make this work. Composite A has a wsdl (a.wsdl) whic

  • Unable to print a web page in color hp officejet 6500a plus

    unable to print a web page in color hp officejet 6500a plus This question was solved. View Solution.