CS6 Big Problem
Why is CS6 shrinking my document when printing to a custom page size?
No page scaling is selected in the driver or the print dialogue box.
I'm working on a mac.
As I said before it is CS6 period, does not matter what software in the CS collection.
I am using indsign mostly.
I use custom page settings, defined by driver and the art shrinks.
I reinstalled all my drivers and the software and the same result.
I am on OS 10.9.5, I have updated the software on adobe products as well.
I use other software on the OS and this does not happen.
Drivers and print dialogue box are at 100% page scaling.
I have used adobe software for 15 years and this is the first time I have had this problem.
I talked my Xerox rep thru the same steps I did, and he had the same result.
It does not do it if I use the pre-set page sizes, or when I manually enter the page size in Indesign.
I can not use just this avenue though, some output devices will not register sheet size properly if I do not used defined by driver.
Thank you for your time, but I have exhausted every avenue I can think of.
I inserted a screen shot also.
Any suggestions on what form to use?
Similar Messages
-
Hi, dear friends,
I have a big problem:
Since I installed OS 10.9.3 MAV (Maverick), I am unable to use Adobe CS6. Each opening Photoshop attempt, the system tells me an error of type 6 or 16.
Thank you for your help, Guys,
Marius SANNAWhich version of Photoshop do you have? The current version is 13.0.6.
-
Hi, I have big problems since 2 weeks with outline, fonts, size in Ai CS6 : Numerical value are so big and I can't change it with smaller. Apparently Ai said me that comes from AiPrefs... Could you help me please.
I tried to initialize my preferences but nothing change.
PS : Sorry for my English, I'm French
PierrePierre,
You may try the list and see how far down you need to go; you have probably been through 1) and 2), and 4) is both reversible and more thorough than 3); 5) is hardly relevant, so you may end up with 6).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
InDesign CS6 - fonts problems (Document fonts fight with system installed fonts, "font incomplete")
hello
First, Indesign function to automatically open fonts from "Document fonts" folder is fantastic, quasy font manager. BUT, fonts is available ONLY for THAT indesign document, no other application can use it, even from CS6 suite. This is probably the most stupid decision about how this function must work. IDEALLY, fonts will be available for ALL application inside CS package until indd doc is closed. If I need some font for editing links in photoshop, illustrator I need to install them. This workflow have wrong concept.
We now have problem, sorry Indesign have problem. Example, I need type1 font mt-symbol for mathtype AND for Indesign. This font is installed in c:\windows\fonts folder. Everything work fine. When I make package from Indesign and reopen indesign indd document inside package, Indesign report that mt-symbol IS INCOMPLETE. WHY, BECAUSE CONCURENT FONTS from both C:\windows\fonts folder AND FROM "Document fonts" folder. If I rename "Document fonts" folder, Indesign open font only from system and everything work properly.
THIS IS BIG PROBLEM, fonts circles around workflow/folders and always will be duplicates in "document fonts" and system\fonts folder because different application need same fonts.
Any solution?Another problem with the Document Fonts folder that we just noticed: in CS5, you could place Windows Type 1 fonts (.pfm and .pfb) into the Document Fonts folder on a Mac and InDesign would activate them.
This no longer works in CS6. (Bug report filed.)
Huge bummer, as this was a great timesaver and workaround in a high-production prepress environment when working with old Windows files. Hopefully this was not an intentional change and will be restored in a later bugfix release, or at worst in CS7. -
CS6 upgrade problems and I can't sign in
I have just bought the CS6 upgrade (windows - disk) for Photoshop CS5 (which works well with my Nikon D800 files using RAW 6.7). 2 big problems: CS6 supplied with RAW 7.0 (7.1 required for D800 file) and though I have down loaded photoshop (and extracted and run) latest update for CS6, it has not upgraded.
So I cannot see my thumbnails in Bridge or open the files.
The second big problem is that CS6 keeps asking me to 'sign in' but doesn't allow me to because 'either my clock is wrong or or there is no connection to the Internet, clearly neither is wrong - now what?
StuartHi Noel,
Problem solved - I finally got Adobe customer support to sort it - it turned out to be my firewall giving a problem (although it has allowed me to install CS5 and other Adobe downloads in the past -therefore I didn't think of that).
Many thanks for trying to help
Stuart
[ excessive quoting removed by admin ] -
hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problemThere is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it
-
Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer? -
I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.
Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue. -
How to load an image without a gui? big problems...
Hey guys, I usually try my best to not ask for help and figure stuff out myself. But this last week i've been having big problems with this work project.
My goal is to load images from disk, and append them to each other to create one big image.
The images are 0-9.jpg each file containing a number in it. then i create one big file with 4 numbers in it. called final.jpg.
so far i can do all this, but whenever the program is finished, the application just keeps running. the program has literally gone through all the steps... i have a system.out.println printed on the last line after the main, after the class instantiation... and still it stays running.
how do you guys load images without a gui? This program will probably be running under unix, so i can't create a (for component example)
Panel() and media track the file load... so i'm pretty much stumped
any help you guys can provide would be really incredibly helpfull at this point. I have searched these threads for a few hours without luck. I found only 1 real post related to my problem, but eventually they said use MediaTracker = new Mediatracker( new Panel() ); which i can't use. :(
Thanks a lot guys.
:Dyeah tried doing that, didn't work either.
UPDATE
I FINALLY found a way...
and here it is for others to find!
public BufferedImage getImage(String filename) throws Exception {
FileInputStream input = new FileInputStream( filename );
JPEGImageDecoder decoder = JPEGCodec.createJPEGDecoder( input );
BufferedImage image = decoder.decodeAsBufferedImage();
return image;
it returns an image buffer, but it's better than nothing! :)
atleast this functions under unix. -
One Apple ID two phones big problem.
Hi guys,
Before 6 months I bought new Iphone 4s,but it was used one day from person who sell it to me, so it already has Apple id.
I deleted user and created my user which was synced with iCloud and worked without any problem.
Before 10 I bought Iphone 5, also created my Apple ID on it and sync with my PC/ iCloud.
Yesterday I want to sell my first Iphone 4 and I did reset ( Erase all content and setting), but it did not want to wake up, so i started it with DFU mode using I tunes, and I did restore and update.
Now I am facing to bit problem, on the begging steps it says something like "this apple id cannot be used to unlock this iphone".
If I go to iCloud I can see only one device and currently its new iPhone 5, but both devices called with same name, so I am not sure is this problem.
So I have two doubts:
- I am not sure does SIM card can make this problem(on initiation phase you have to put sim in Iphone), because main is much smaller now so I using my wife SIM to finis registration Iphone 4 (iPhone 5 using smaller than iPhone4)?
- another thing It says you have to "use original apple id..", like I sad on the beginning when i bought Iphone4 it already has apple id on it, which I was deleted and configure main (afterwards this device was visible on my iCloud). So do I need to put first creaded apple id, does iPhone remembering first created or last used. If yes I have big problem because I dont have contact of user who sell it to me.
I want to add one thing, Iphone is not stolen I have warranty documentations and all profs that is not stolen.
PLEASE HELP, in my country we have awful support !Just left the Apple store with an official answer. You can have two phones one Apple ID, turn off auto updates so you don't automatically get apps on both phones. Then you need two different iCloud accounts.
-
Hi There
Am having a big problem updating my iphone 4 Apps, due to a problem with my password for my apple id. But it seems that i have two different ids, one for the updates and another for the downloads. I am not able to retrieve my Id password for updating my Apps. Can you help me ps?
Thank youWhat program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager? -
Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?
when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message? -
i have a big problem why is it i cant update my ipod touch 2g into ios 4! im using the latest version of itunes and everytime i click "update" it stucks on the "contacting server" please help i want to update it now
Maybe here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
Bridge cs5 camera raw 6.5 to 6.5 and new bridge cs6 preview problem
Hi,
when i actualize camera raw from 6.5 to 6.6 the preview can`t give me right preview after 1 adjustment in camera raw.Image apears like when we open it in camera raw and it last few seconds with the yellow exclamation mark.
Months ago the only solution i found after several instals was to turn back to camera raw 6.5.
Now im trying beta bridge cs6 and problem come back for me again.
I use Nikon D3x with 14 bits ~49MB .nef files in Windows 7 64 bits.
Is any one have same problem?And why only in 6.6 (and new camera raw 7.0) and not in 6.5?
Thanks
Arménio TeixeiraFrau S aus B wrote:
I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR. -
modem firmware 04.12.09
iPhone 4
memory is 32 g
iso 7.1.2(11d257)
when cancel call it not work before is shutdown and open it again
i have big problem i make update to my software iso 7.12 in my iphone 4 but when i recive calling and i want to cancel and recall again i phone is stop no working and i must restart it to work what can i doBasic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.
Maybe you are looking for
-
Free membership instead of paid subscription
A couple days ago my subscription was expired because I have difficulties with my bank (issues on bank's side) and I can not pay well. Support told me that a can not re-activate this and should buy a new one subscription. I did it but I have an issue
-
Is it possible to create a column in runtime?
Hi, I created a application that connect with Access database. I just wonder is it possible for user to create a column in runtime, because the application need this kind of interaction. Many thanks, Ann
-
When I try to put the updated Firefox icon into my applications folder, I see this message: The operation can't be completed because the item "libsoftokn3.dylib" is in use. I have closed all apps and don't understand what this refers to. Thanks!
-
Order multiple quantity in item master data
Hello experts, I cannot import from Excel file new values for order multiple quantity in item master data (in section planning data). After importing I see that records were imported successfully, but all data which we put in past have been change
-
SO_NEW_DOCUMENT_ATT_SEND_API1 Error (Email not received)
Hi all,<br><br> I am using following code just to send out an email to Users Notifying that Directory is Not empty. No attachment is required. <br><br><pre> data: p_file type salfile-longname. data: ifile type table of salfldir with header line. dat