CS6 - Bluray pauses on menu screen, what happened?
I've burned a ton of blurays with encore and rarely have problems.
Today I was burning a short film with a simple menu that says "play".
When I try to click on "play", the text flashes that it's been selected, I see a little play icon at the bottom of my Sony Bluray player, but then it flashes the pause sign and I'm stuck at the menu. I can't proceed past it no matter what I do.
The odd thing is in encore it appears totally fine. I hit enter and it goes to the film. I've started a new project file and redid the whole process and am getting the same error. I'm not sure what I'm doing wrong!
UPDATE: Geez. I just burned a bluray that was set to auto-play the timeline, NOT the menu. In encore it goes straight to the film, but in my bluray player it goes straight to the menu and has the same problem!
Posted them below.
Here's something odd. I went back to the last short film bluray I made that worked and decided to use that as a template. (I burn blurays for short filmmakers a lot.) Anyways, I brought a new film into that template, burned it, and it played fine.
I decided to bring the short film I'm having trouble with into the template. Burned it...The same problem! I brought the problem disc into this mac app: http://www.macblurayplayer.com/ And it plays the movie. BUT, that app automatically removes all titles...Regardless, I know the movie's on the disc, there's just a problem at the menu for some reason.
Regardless, this is the workflow for the problem disc.
Similar Messages
-
So i stayed the night at my friends house. when i wokeup i went to go on my ipad.. clicked the lock button and went to scroll my arrow so i could unlock it..but i had to click the box with the arrow in it, then double click the arrow before i could move it. same thing when i was typing up my password. i had to click a letter, double tap it to register, then tap then double tap, and repeat until my password was done. now, about 48 hours later when i click the lock button, i see the display light up, like it shows the backlights on. but nothing appears on the screen. whats wrong with my ipad? my parents are so mad. **recently upgraded to ios 6**
You have accidentally enabled VoiceOver; follow instructions below to disable.
http://support.apple.com/kb/ht4064 -
Is my ipod broke if it wont go past the startup screen with the apple on it? It will not even connect to itunes or anything after the update to ios6
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
What happened to the "bookmark this group of tabs" function?
Firefox 6.0 doesn't have a "bookmark this group of tabs" function on the bookmarks menu. What happened to it? Can it still be done? How? This is progress???
Thanks. Is it me, or is this completely counterintuitive? I expect the tab context menu to have stuff that applies to a particular tab, and the Bookmarks menu to contain functions concerned with bookmarks globally.
-
CS5 Mac - What happened to Adjustments- Variations?
I cannot find Variations in either 64 or 32 bit PS CS5 for the Mac. My PC friends say it is where it belongs in both, in the Adjustments menu.
What happened to it?
TIA,
BillI recently did a clean install of everything on a MBPro. I only use 8-bit images. I am in the 32-bit kernel. Variations is NOT in the Adjustments submenu.
But, if I Get Info on Photoshop and check the Open in 32-bit mode, "Variations" appears and works. I have not tried this in the 64-bit kernel. But, why should it not work there too.
Bill -
How to create the same cool 'introduction' menu/screen that Jira has?
If you login to Jira for JavaFX bugs https://javafx-jira.kenai.com/
there is a cool 'introduction' menu/screen "What's new with Jira 5.2"
How was it implemented? I would like to have a similar screen for my application.Hi,
Kindly go through this sample program below:
DEMO_LIST_FORMAT_INPUT *and
check this function module:
FREE_SELECTIONS_DIALOG *.
Hope it helps
Regards
Mansi -
What happened to Layout Adjustment? CS6 MENA
Hey, what happened to Layout Adjustment?!
I'm looking at InDesign CS6 8.0.1 ME version (Hebrew enabled, English
interface). It's definitely not there under the Layout menu. I've got
"Create Alternate Layout", "Liquid Layout", "Reverse Layout" (an ME
feature), but no Layout Adjustment!
I have clicked "Show All Menus" in the Workspaces menu at the top of the
screen.
I have trashed preferences.
To no avail.
The only way I'm able to access Layout Adjustment right now is via Quick
Apply (with "Include menu commands" ticked.)
Also, in Edit>Menus>Application Menus there is no entry that I can see
for Layout Adjustment (I'm looking under the Layout menu entries.)
So... where did they move Layout Adjustment to? Where is it on your
machine?
Alternatively, did they just forget to include it?
Thanks,
Ariel
Win 7 64-bitSo it is! Well spotted ;-)
Ariel -
What happened to Camera Raw in Bridge CS6
What is going on with Adobe? What happened to the Camera Raw features in Bridge CS6? It was working perfectly fine in previous versions.
Working on a MAC, first sign, when I go in the AdobeBridge CS 6 drop down menu, select Camera Raw Preferences... nothing happens. Then, selecting any JPEG, right-click, no option to open in Camera Raw like before.
Should I install something to have this activate? Am I missing a piece? We just bought 10 version of hte Creative suite and we rely on Bridge a lot to work our photos, specially Camera Raw...
Any clue, someone?This from another post. Hope this works.
CAMERA RAW (ACR):
To get to ACR:
File>open (Mac) or open as (windows) and pick file. Change format at bottom to Camera Raw from selection list
File>browse in Bridge, right click or hold ctrl and click on tiff or jpg and select open in camera raw
There are also preferences you can choose under "file compatibility" to prefer ACR for supported RAW files -
What happens between the chime & the grey screen on boot?
Hi,
My Mac Pro has recently started taking up to 30secs to reach the grey screen when booting. The chime happens shortly after (re)starting, and then there's a significant pause, where nothing seems to happen (even the Apple Display stays in stand-by mode), before the HDD starts reading and the grey screen appears. I tried using Verbose mode, but the data it prints to screen doesn't start until after the long pause, so…
Anyone know what the Mac Pro could be doing? I've no other problems with the machine.
Thanks,
S.Hi,
My issue has been solved, apparently by a combination of a PRAM reset and re-selecting the startup disk in System Preferences. My machine now moves from chime to Apple logo almost instantaneously
The AppleCare representative was thorough and walked me through various steps that narrowed down the issue, and his hesitant conclusion was that somehow, as hatter suggested, the Mac was taking its time to find the appropriate boot device - possibly as a result of a change I had made in my BootCamp partition (Windows 7) or as a result of a previous PRAM reset (as hatter suggested).
Case closed! Yay!
S.
EDIT: So, Japamac, it was presumably the "system selection" part of the post-Chime process that was causing the delay. Didn't see your post till I returned to respond with this post, but thanks for the effort anyway
Message was edited by: SiRGadaBout -
What happened to the hand drag sliders in CS6?
What happened to the hand drag sliders in CS6? You know when you would create an adjustment layer and then you could hover below the sliders and just start dragging either way? And you could option+double click and reset the value to 0. Is this functionality still in CS6?
There is no place I get a "Hand" when near sliders in an adjustment layer, though I can click on the sliders themselves and drag them.
Conroy, can you do a screen grab of what you're describing? Perhaps I'm not looking at the same thing you are.
-Noel -
PS CS6 - What happened to Page Setup?
Please help - I'm about to bang my head on the desk in complete frustration, and it shouldn't be this difficult!!
What happened to Page setup in CS6? I'm trying to print a document with canvas size 11x17. When I try to print, the media box is listed at 8.5x11. There is no obvious way to change it, and Page Setup is no longer in the file menu, or on the dialog box.
Here's a video demonstrating my attempts - http://screencast.com/t/n5Uuae3zSzTc
Please help!!!!
Many thanks.Change the page size in print settings. But some printer drivers require that you save custom print sizes as a preset before they'll tell the application about the custom page size (lame, but that's printer drivers for ya).
-
Help! I just installed the latest update on my IPhone 4 and now I can't access my podcasts. When I hit the podcast I on, the screen goes blank for a second and then opens to the home screen with all my icons. What happened?
Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.
-
I installed the latest update to my phone. Half way through it asked to connect to itunes. After updateing it had some type of error and wanted me to restore the phone. After restoring, another error box popped up and said that it could not be restored. Now it won't connect to itunes or my computer at all and is nothing but the black start up screen with the apple logo, or it's just a white screen. What happened?
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
My iPod was working just fine, and then when I went on YouTube, it flashed a blue screen (for like one minute) and then restarted and shut down. Should I be worried? What happened?
My new iPod 5th gen did the same! I think it might be a YouTube and iOS connection glitch
-
my screen broke and i can no longer see whats happening ive had my phone for 4 months and im under 1 year warranty im sure. they said it would cost me 200$ to replace the phone at the apple store
Apple's one year limited warranty covers hardware... not physical damage!
Maybe you are looking for
-
Ipod shuffle will not charge and is not recognized by itunes or computer
HELP, My G2 ipod shuffle will not charge and is not recognized at all by my computer or itunes. it is like there is nothing even pligged in to the usb port. and when i plug in my ipod to the charger my ipod blinks orange 4 times and then stops whats
-
Thunderbolt won't wake from sleep on Mac Mini Server w/Lion 10.7.1
I have done the firmware updates, thought the probelm was fixed, but again, the display was asleep (as far as I could tell) and would not wake up.......unplugging and replugging the TB cable made it come right back. TB display : Firmware Version:
-
ITunes "unexpected quit" when ipod plugged in?
Hello! I've never had this problem before. I apologize if this topic seems similar to others, but I noticed there were a few differences in problems. Whenever I plug in my ipod (version 1.2 of the photo ipod) to my ibook, iTunes (4.8) will crash (i.e
-
Dynamic code generation by system in place of Z program when listcube
Hi Experts, in process chain there is one step attached ABAP program with variant to create a file from 3 cubes and sent it to some other server. one day it was not created any file and did not send to the respective server. then i opened the process
-
Unable to edit Flash file - Can't enter inside buttons/movie clips.
Hi I am in the middle of creating a website using Flash CS5. I opened up my .Fla file one day to continue my work but I am no unable to access buttons and movie clips. When creating movie clips or buttons I am unable to get inside them, when I hover