CS6 can't open Raw Nikon D4 files

I cannot open Raw files from my Nikon D4 in CS6 beta but I can in CS5 as it updated Camera Raw recently for it to work with the D4. Can I update CS6 for it to open Nikon D4 Raw files ?

Hello, ACR 7 and ACR 6.7 and Lightroom 4 do not support the same cameras, it was done to get the products out of the door as soon as possible.
But you can use the DNG converter 6.7 on the files to be able to open them in ACR 7 in CS6 beta. see: http://blogs.adobe.com/lightroomjournal/2012/03/raw-support-in-lightroom-and-camera-raw.ht ml
Also, it is a good moment to remind @Nikon_USA or @Nikon_Photo that they should support DNG in their cameras.
They are using useful engineering time in all raw converters teams, and even have to update their own converter at the release of each camera!
And if they are concerned with trade secrets, there is always private maker notes for that!

Similar Messages

  • Can't open RAW Nikon files (NEF) using PS3 10.0 running 10.6.8 , think there is a conflict with camera Raw plug-in. Can't open raw images in bridge or photoshop.

    I think I may have a Camera Raw plug-in conflict or plug in may be in the wrong place. In both PS3 and Bridge Nikon raw files (NEF) will not open. I've noticed that in photoshop in the pull down menu-about plug-in, I have 2 Camera Raw (s) listed, getting info one is 4.0, the other 4.6.0.30. It appears that my files and .xmp are 4.0 just by searching for 'Camera Raw' either 4. or 4.6 in spotlight. nothing is listed in spotlight under camera raw 4.6, but all my images are listed in the spotlight if I search for camera raw 4.0! I can not open either in Bridge or Photoshop CS3 I just receive the error message 'could not complete this request because photoshop does not reconize this type of file'. any help would this is greatfully appreciated. Thanks

    Well if you have a fairly new Nikon camera PS CS3 will not have the proper version of ACR to support that camera.
    You could use the Adobe DNG converter to convert the NEF files to DNGs or you can update PS to a newer version that does have support for newer cameras or you could buy Adobe Lightroom V4 which also has support for the newer Nikon cameras.

  • Opening raw nikon 5200 files

    What plug in do i need to open Nikon 5200 raw files in cs5?

    There's no direct support for your camera in CS5.
    It would require ACR 7.3 or higher, which only work with CS6.
    You can download and run the free Adobe DNG Converter 7.4 to convert your raw Canon files to raw DNGs which you can then open in CS5.

  • How do I open RAW Nikon D600 files on PS Elements 9?

    I've just bought a Nikon D600 but I can't open the raw files in PS Elements 9, what do I need to do, thanking you in advance for your help, David

    You have two alternatives:
    (1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
    Windows download click here DNG Converter 7.3
    Mac download click here DNG Converter 7.3
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Can't open RAW or CR2 files anymore, Get message "Wrong type of file" HELP PLEASE

    As a photographer I shoot in RAW or CR2 an di have used my photoshop elements to tweak my pictures for hte last year but now my program says "Wrong type of file"...nothing has changed, so why can't I open these any more? Anyone? please help
    Thanks
    Rob

    What camera model and what version of the raw plug-in are you using with Elements? 
    It is possible the pictures are corrupted and cannot be read.  You can try opening them in the Canon DPP software that should have come with your camera and try exporting as a JPG from inside there and see if it also reports a bad file.   Or you can post a public download link for one of your files, here, and others can try the files in their Photoshop or Lightroom and see if they work or not.

  • Can't open RAW files in CS3 or Bridge

    I am using PowerMac G4 running OS 10.4.10, one gig RAM, with an Nvidia Geforce 4 MX graphics card. Adobe Updated notified me the new Camera RAW plugin was available so I said yes to install it. The installer hung half way through and I had to force quit it. Since then I can't open RAW (Nikon NEF) files in Bridge or CS3. I get generic raw file thumbnails in Bridge and the error "Could Not complete your request because Photoshop does not recognize this file type" when trying to open one into ACR from Bridge or Photoshop. I tried d'loading the plug-in and manually putting it in the proper folder, still no good. I have reinstalled the program from the install disk, purged the main and folder cache in Bridge, deleted the PS preferences (command+alt+ shift when opening PS), repaired OS permissions, and the like, all to no avail. Photoshop or Bridge just don't see the plug-in when opening NEF files, though it does show in the "Bout P, which is in the proper place- root/library/application support/adobe/plug-ins/CS3/file formats/camera RAW Plugin
    How can I fix it?

    Greetings! I am having the same problem.
    I'm a graphic designer (not a photographer), working on Mac 10.4.11, CS3 (ps is 10.0.1, bridge is 2.1.1.9) with the latest ACR plug-in (4.3.1) and the latest DNG Converter. Our photo library is on a server, accessed by multiple computers.
    We can preview .CR2 in Bridge, open .CR2 in PS.
    6However, we cannot preview or open .CRW files. We have tested on three machines, all with the same problem. In the past (before CS3) we were able to open and process these files.
    Tried opening .CR2 files in CS2 and couldn't. Couldn't open them with DNG Converter or Graphix Converter.
    Have tried all the standards fixes:
    1. Correctly updated the most recent Camera Raw plug-in, following Adobes very explicit instructions as to where the plug-in goes (checked it three times).
    2. Removed a copy of the Camera Raw plugin from a secondary folder, hoping that might have caused conflict.
    3. Reset my preferences in Photoshop and Bridge to default.
    4. Purged the cache in Bridge (via TOOLS, not in preferences) and refreshed AND told Bridge to build new thumbnails/caches
    5. Closed/reopened Bridge.
    6. Repaired permissions
    7. Restarted my computer
    We are going to try to find a disc with original RAW photos that have never been placed on the server to see if it's a server issue. However I'm thinking that's not the problem.
    Any ideas as to why we can no longer open these CRW files?
    I have two problems I need to solve:
    1. For future photoshoots: does turning OFF sRAW setting help prevent this problem?
    2. Is there anyway to convert the .CR2 files without using Photoshop CS3/2 or DNG Converter? We're hoping to try to salvage the photos we have.
    I did see Elev Man's comment about the problem being corrupt files...disk failure/problem fixed with Disk Warrior. I'll also check that out.
    Thanks!

  • I can not open raw files in cs6 extended ,my camera is Nikon D 800E.

    I can not open raw files in cs6 extended ,my camera is Nikon D 800E.
    Hope some one can help me.
                                     Robert chen

    The D800E is definitely supported in Camera Raw 7.1 which is compatible with CS6.
    Which version of Camera Raw are you running?
    Win: Help > About Plug-In > Camera Raw
    Mac: Photoshop > About Plug-In > Camera Raw
    If you're already on 7.1, what exactly happens when you try to open Raw files from that camera?

  • How can i open a raw nikon D300s file in photoshop 7.0.1? [was: rescueranch]

    How can i open a raw nikon D300s file in photoshop 7.0.1?

    The D300s was first supported in Camera Raw 5.5
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Raw 5.5 is only compatible with Photoshop CS4 and later
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Your options:
    Join the Cloud, or
    Buy CS6, or
    Convert the Raw files from the D300s to DNGs using Adobe's free DNG converter
    http://www.adobe.com/products/photoshop/extend.displayTab2.html
    Then edit the DNGs in Photoshop 7.0.1

  • How can I open raw files from my Nikon D7100 in CS4 or CS5?

    How can I open raw files from my Nikon D7100 in CS4 or CS5?

    Andy,
    In the simple and short form, what happens with the ACR (Adobe Camera RAW) module is that it gets updated with regularity, to accommodate the camera mfgr's. changes for their newer models. That ACR works within the host program, such as Ps, PsElements, Lightroom, etc.. At a point, Adobe ceases to support older host program versions. When that happens, the user has a few options:
    Upgrade the host program version
    Use another host program, such as PsElements or Lightroom
    Use the free DNG converter, per Curt's suggestion. That is not host program dependent
    Glad that the DNG Converter works for you.
    Good luck,
    Hunt

  • Can not open RAW-Files from Nikon D4 in Photoshop cc

    hi. i can not open RAW-Files from Nikon D4 in Photoshop cc. (Camera RAW 6.7) can you help please?

    ACR 6.7 would be for an older product, PS-CS5 or PSE10 or PRE10.
    What does Help / About Plug-ins… / Camera Raw… show in PS-CC for a version for ACR and is there more than one version of ACR in the Help / About Plug-in list.  Help / About Plug-in is what I’d do on Windows; I’m not sure if the menu path is the same on a Mac or not.

  • Can't open raw files from Nikon d800 in PS CS5 and can't update Camera Raw plug-ins

    Can't open raw files from Nikon d800 in PS CS5 (Win7 64-bit). It says, the model not supported by Camera Raw. Tried updating Camera Raw plug-ins for d800 but keep getting error message: Update failed, Adobe Application Manager may be damaged. Re-install the latest application manager but still the same error message. How to fix?

    These links may help
    Adobe - Photoshop : For Macintosh
    Adobe - Photoshop : For Windows
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • How can I open RAW files from Nikon D7100 in Photoshop Elements 9?

    How can I open RAW files from my Nikon D7100 in Photoshop Elements 9

    Three choices:
    1. Upgrade to PSE11
    2. download the free Adobe DNG Converter and then convert your RAWs to DNG, which will open in PSE9
    3. Use manufacturer's software and convert to TIF (or JPG)

  • Nikon D7200 and can not open RAW files.  Error msg says camera isn't supported.  Using PSElements 12

    I recently purchased a Nikon D7200 and I can not open RAW files.  I get error messages indicating camera isn't supported.  I've downloaded RAW 9.0 but no luck.  I'm running PSElements 12.  Any suggestions?  Is the camera too new for Adobe?

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements
    As per
    Camera Raw plug-in | Supported cameras
    D7200 needs ACR 9 and according to
    Camera Raw-compatible Adobe applications
    PSE12 supports only up to 8.5

  • I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

    I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

    The Mk III requires an updated version of Camera RAw, so run Help --> Updates and install it.
    Mylenium

  • I'm using a 30 days trial of PS  CC...but I Can't open raw files from my NIKON D 7100

    I can't open raw files in PS CC.
    I'm using NIKON D7100.

    Noel,
    Good morning, and may I just add  THANK YOU!
    While certainly not as efficient or handy, that is the answer.  I simply
    instructed my PC to open the containing folder, in this case my direct card
    reader, and manually copied the files to my hard drive (highlight first and
    last-SHIFT-Enter) and moved them to a pre-named subdirectory.
    I opened PScc and pointed to that file, clicked on the photo I wanted and
    VIOLA!  Opened in Camera Raw and I was off to the races!
    Perhaps the user groups can make some noise and someone at Nikon may take
    notice!
    Thanks again for the suggestion.
    Larry

Maybe you are looking for

  • "Error 1603. A fatal error occurred during installation"

    Ive been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error "Adobe Drive CS4 Error: Error

  • Upgrade to 10.4.10(8R218); ipod now not recognised

    Last night I let 'software update' do it's thing, which seems to be an update to 10.4.10, and now my iPod Shuffle isn't recognised when I plug it in. Has anyone else seen this problem? Max.

  • Consignment stock for 2 customers

    Hi all, I'd like to know if it's possible to have a common consignment stock for two customers. Thanks, Julien

  • How to expose odata service for input parameter based procedure.

    i have created one procedure in my schema. CREATE PROCEDURE TEST (in id varchar) AS BEGIN SELECT * FROM "table" WHERE "ID" = :id; END; and i am able to call the procedure from console. CALL "schema"."TEST"('1') my question is how to expose this proce

  • Cloud Connector - Contact Creation in Eloqua

    I am building a new Cloud Connector. I have reviewed the following doc http://img.en25.com/Web/Eloqua/EloquaCloudConnectorSampleGuide.pdf In the above example, the doc assumes the email address already exists in Eloqua. The Cloud Connector is used to