CS6/CC - Brushes do not work!

Hi there,
I have photoshop 5.5 and it works totally fine with my bosto kingtee tablet. I recently tried downloading the CC trial to test it out and I can click buttons in photoshop with the pen just fine, I can draw with the mouse just fine, but it doesn't put a mark on the canvas with my pen. I then grabbed a cs6 trial, same deal. Seems only 5.5 is working for me. I've reset the brush settings and preferences, I reinstalled my pen drivers. I'm out of ideas!

blanktarget2 wrote:
it does work for other people. So it's not the driver from the tablet maker.
You need to consider that you might be oversimplifying things, and re-examine your assumptions.
Chris is one of the more senior engineers on the Photoshop team. He knows what he's talking about.
Try uninstalling and reinstalling your driver. If it has a preferences panel, see if there's a way to reset them to defaults.
-Noel

Similar Messages

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. Help

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Adobe Illustrator CS6 serial number does not work on my new MAC. It does work on my old MAC.

I have Adobe Illustrator CS6 installed on my new Mac but the serial number does not work.
Do I need to remove the program on the old Mac first?

Thanks for you reply
Then I do not understand why the serial number does not work? I have tried to type it several times.
Regards
Einar Tyholdt
9. jan. 2015 kl. 16:16 skrev Monika Gause <[email protected]>:
Adobe Illustrator CS6 serial number does not work on my new MAC. It does work on my old MAC.
created by Monika Gause in Illustrator - View the full discussion
You can install it on two computers simultaneously, so uninstalling is not needed if it's the only other installation.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7080891#7080891 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7080891#7080891
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Brush function not working correctly PS Elements 11 for Mac

The brush is not working correctly in that I cannot drag the brush. It allows only spot healing, not dragging the brush. Didn't use to have this problem. Now do. Not sure what has changed. Thank you!

Is this happening after upgrading to Yosemite?
If yes, please see:
Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
Thanks,
Anwesha

CS5 - Mixer Brush - Wetness not working properly

Hi,
I'm using the trial version of Photoshop CS5 Extended.
I'm very excited about the new Bristle Brushes and the Mixer Brush. I think, a nice job was done on these features. However, I think the "wetness" attribute of the Mixer brush is not working as it is intended. I would expect that low setting of wetness would cause the brush to interact less with the underlying color. At the moment, when set to 0% wetness, the Mixer Brush does not interact at all with the underlying color but at 1% wetness it fully interacts with the canvas. There is no perceivable difference between 1%, 50% or 100% wetness. I think this should be fixed in order to enable the full power of the Mixer Brush.
Apart from that, the new brushes are just awesome. It is the most haptic and expressive brush engine I've ever used.
Thanks,
DanieL

This seems to be a problem with the Bristle Brushes only and is quite annoying considering that the Bristle Brushes are practically made for the Mixer Brush. Other brushes seem to use the Wetness slider just fine. Here's an example:
I hope Adobe fixes this in a patch.

Brushes are not working for lightnening

My brushes do not work, for lightening. I restet them and did control alt shift already.

Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
Please check this wiki -
Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

The lightroom 4 brush is not working

I installed lightroom 4 trial program. But, the brush is not working. The brush only can make a dot but can't move the dot and change anything. Could you tell me how to fix the problem?
Cheers,
Tony

Hi Keith,
Thank you for helping me. I do not know how to adjust the brush parameters to zero. I tell you what I have tried again but the brush is not moving.
Select DevelopClick DoneClick BrushClick ResetIn effect, click Restore Default PresetsIn Show Edit Pins, choose AlwaysTicket the show select mask overlayChoose brush AAdjust size to 0.1 feather to 0, flow to 1. The brush was not moving. It only had a dot on the picture.Then, adjust size to 5.7, feather to 31, flow to 3. The brush was not moving, too.I am sorry. I really need your help again.
Thanks a lot,
Tony
Date: Mon, 20 May 2013 07:47:19 -0700
From: [email protected]
To: [email protected]
Subject: The lightroom 4 brush is not working
    Re: The lightroom 4 brush is not working
    created by Keith_Reeder in Photoshop Lightroom - View the full discussion
That sounds like it is working, Tony - remember that once you've painted where you want the effect of the brush to apply, you need to adjust the brush parameters, which all start off zeroed.
If you want to see where you've applied the brush, press the (letter) "O".
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5336211#5336211
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5336211#5336211
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5336211#5336211. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

The brush do not work sometimes without a reason.

Sometime without a reason (I mean I cant find one) the brush do not work (it appears the symbol when you are not able to use a tool), to solve the problem I copy and paste everything on a new document, but it is very messy, what am I doing wrong?
Thanks for the help!

Hi thank you for the answer,
can you be a little more specific? How can I solve this?
I have not understand this:
The brush tool will only work when there's a brush present in the brushes panel ("Basic" doesn't count as a brush)

Downloaded Brushes will not work!

Okay, so after a month of struggling to get Potoshop CS6 Extended Teacher Student Edition to work, I was playing around, downloading brushes and actions. The actions work. But I can't get the brushes to. I download them into the downloads file and then move them into program files > Adobe > Adobe Photoshop CS6 (64bit) > Presets > Brushes
There are some other folders. The other one is in program files > Adobe > Adobe Bridge CS6 (64bit)
Program Files (x86) > Adobe... And In that is Fllash player, Photoshop Utilites - CS6, Adobe Photoshop CS6, Adobe Extension Manager CS6, Adobe Bridge CS6 and Acrobat 5.0
Did I download it in the right place? In the program files and not Program Files (x86)
And then when I moved the files into the brushes folder, I got something that said "You'll need to provide administator premission to copy to this folder." And then it asks to countunie, skip or cancel.

Um I got a new tower, that holds 1 trigbits? Um so probally the 64. Most of the files were zipped. Abr. not zip?
C:\Users\Your Name\AppData\Roaming\Adobe\Adobe Photoshop CS6\Presets\Brushes (Don't have it)
I go to C:/Users/Owner
But that's all I have

Local Adjustment Brush does not work in Windows 7, 64-bit

All other tools and functions work OK. My issue is just with the Adjustment Brush; The Adjustment Panel opens when the brush is selected and the brush moves, but none of the adjustments are applied to the image. The problem is clearly related to the new operating system. This was just confirmed, by removing the hard drive with the Windows 7, 64-bit OS, and inserting an old hard drive with Windows Vista, 32-bit installed. The adjustment brush works fine with the old OS and the same version of PS.
My normal monitor resolution is 1920 x 1200 with a DPI of 151; however, this DPI is not compatible with PS, so I reset it to 149 evey time I use PS. Lower screen resolutions and DPI settings don't resolve the problem. I mention this only because of a previous cursor problem that was resolved by changing the DPI.
I'm using CS4 with Camera Raw version 5.6. Version 5.5 also does not work.
Can anyone offer suggestions?

Problem solved. One of the recent upgrades to Camera Raw reset the flow rate to zero, which I did not notice until after posting the message.
Sorry for the error.

Brush tool not working as it should.

Hi i am trying to use the brush tool but it is stuck as a cross and it will not go to a circle when you try to resize it, i know i am doing something wrong but can not work it out ,could someone tell me where i am doing wrong please.
Many Thanks Bruce.

Thank you very much Barbara for your advice that is it working fine again .It is so frustraiting when you get stuck with something and do not know how to fix it
i am enjoying elements but it is a big learning curve lots to take in but rewarding when you achieve something, many thanks again . Bruce

Dreamweaver CS6 "Find and Replace" not working

Since I've started working in DW CS6 I've noticed that the Find and Replace feature isn't working completely.
E.g. If I select a block of code, then open Find and Replace, tell it to find " " and replace it with "</li>" it only replaces the first instance. The rest of the 's are still 's.
Is this happening to anyone else? I may have to switch back to CS5.

bracdiver wrote:
** ANSWER/Workaround
Change the selection in the 'Search:' dropdown from the default 'Source:' to 'Text' or 'Text (Advanced)' and you will get the desired result.
bracdiver, your post may be useful in some examples, like the ones I posted above. However, this does not work in my intended example below (which is source code specific), where the actual source code needs to be replaced:
Sample
 These are true or false questions. Place your answer on the blank under each question.
<ol>
 <li>There are twelve in a baker's dozen</li>
 <li>35% of people are going to school.</li>
 <li>There are seven books in the Harry Potter series.</li>
 <li>The longest running play is "Les Miserables"</li>
 <li>There is no blank under this question. Answer beside this question instead.</li>
</ol>
Using these options
Find in: Selected Text (first four list items)
Search: Source code:
Find: </li>
Replace: ___________________</li>
Options enabled: Match case
Desired output:
These are true or false questions. Place your answer on the blank under each question.
<ol>
 <li>There are twelve in a baker's dozen ___________________</li>
 <li>35% of people are going to school. ___________________</li>
 <li>There are seven books in the Harry Potter series. ___________________</li>
 <li>The longest running play is "Les Miserables" ___________________</li>
 <li>There is no blank under this question. Answer beside this question instead.</li>
</ol>
CS6 DW output:
These are true or false questions. Place your answer on the blank under each question.
<ol>
 <li>There are twelve in a baker's dozen ___________________</li>
 <li>35% of people are going to school.</li>
 <li>There are seven books in the Harry Potter series.</li>
 <li>The longest running play is "Les Miserables"</li>
 <li>There is no blank under this question. Answer beside this question instead.</li>
</ol>
Using your workaround (with 'Inside Tag' option set to li), this will not work as does not change any text at all.

Photoshop CS6 Save for Web not working

I am using photoshop CS6 (cloud) on Mac (10.7.5) and when I use the Save For Web > save, i got the following popup :
---- Adobe Save For Web Error ----
Could not complete this operation. An unknown operating system error has occurred.
I have been using CS6 for months and it worked fine yesterday before shutting done. Today morning at startup it was not working anymore.
I have tried to uninstalled and reinstalled photoshop, clear my presets, shut down/started up, repair disk, repair permissions,... without succes.
The save for web function still works in CS5.
Any help will be very much appreciated,
Raphaël K.

I found the solution (took forever to consolidate all the answers) for OS X 10.9 + Maverick. Finally!
1. Change permissions (as AOTPR says) to your User/Library/Preferences file so that your admin and user (the one you are using) has read + write permissions within the Get Info pane (command+I). You may have to add them with the sign.
2. Delete Adobe save for web 12.0 Prefs & Adobe save for web 13.0 Prefs files within the User/ Library/ Preferences folder. These may be hidden for some people, so when in a finder window, hold Option(alt) and click Go from the main top menu (keep holding Option/Alt) and click Library — the full Preferences folder should open for you.
3. Change the view when in Save for web pane in PS. If you have it in Cover Flow — it won't work. Change it to another view like List or Columns view.
Presto! Works for me on Maverick.
Thank god. It took forever to get this cleared up!!
If you have any questions, email me [email protected]

CS6 serial number upgrade not working (win)

I've been using CS6 for a while now (got an upgrade from CS5.5) and I'm trying to install it on my second computer and suddenly the serial number isn't correct. I'm using the serial number from CS6 (i've dubble checked the box and online) and I can't figure out why it's not working.
Could it have to do with the product I'm supposed to choose? I've tried all off them with 6 in it and still NOTHING
Help please!

If you purchased an upgrade and it is askling you to choose the qualifying version, that would be the older version (CS5.5) that qualifies you to use the upgrade version. You will have to choose CS5.5 as well as provide the serial number that was used for CS5.5 when you activated it.

CS6/CC - Brushes do not work!

Similar Messages

Maybe you are looking for