CS6 & CC Instantly Close, Audition "License could not be validated"

Hi,
I am given the full CS6 suite through my school. I also just subscribed to the student Creative Cloud subscription (which I really don't want - I wanna wait until it is available through my school - but I thought just having CC would get rid of my CS6 woes).
What's happening:
The night before last I was editing a huge, important project in Premiere Pro CS6 and Audition. Following some tutorials and wanting to make use of Audition CC's new features, I installed a trial of Audition CC and everything worked fine.
Yesterday morning Premiere Pro closed every time it opened a project. Didn't matter WHICH project or if I created a new project. --Wasn't just crashing - if I moved a source file and relocated it when I opened the project, it would ask me if I wanted to save the project before closing.-- Every other CS6 program would do the same thing except Audition CS6 which said "Your license could not be validated. Audition must now shut down." I'm assuming this is what's happening to the other programs.
Hours of pulling my hair out, researching and trying fixes, I subscribe to CC and let it download the programs overnight.
This morning, it's doing the exact same thing. Photoshop, Premiere close instantly, Audition says my license could not be validated.
What the heck is going on??
Here is a YouTube video showing what happens when I open Audition, Premiere & Photoshop. (The weird error that pops up when I load the support chat is just my Gyazo GIF being unable to upload the gif - irrelevant.) https://www.youtube.com/watch?v=b12euH1aFME
Log-stuff:
The only major concerning thing I found in the Event Viewer this morning was:
Activation context generation failed for "C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC\Dreamweaver.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0. 7601.17514_none_fa396087175ac9ac.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.76 01.17514_none_41e6975e2bd6f2b2.manifest.
Sounds like an activation issue - maybe related to my problem.
[I've seen people ask for and post the Adobe logs but no post saying where those are. Point me and I will post them.]
My PC:
Windows 7 Ultimate 64-bit, activated
24GB RAM
AMD Phenom II X4 965BE 3.4GHz Quad Core CPU
240GB SSD that the programs boot from
2TB HDD that the caches are (were ) on
Nvidia GeForce GTX 660 GPUNvidia GeForce 9800 GT GPU (PhysX - Adobe set to use the 660, which is CUDA compatible, etc.)
1080p + 1280x1024 resolution
What I've Tried (That I Can Remember):
Reinstalling (multiple times)
Creative Cloud Cleaner (+ reinstalling)
Signing out & back in of the creative cloud program
Using a new user account & repeating
Buying & installing full CC collection
Uninstall - Creative Cloud Cleaner - Reboot - CCleaner clean/registry fix - reboot - reinstall
Contacted Support chat - just told me it's a technical issue, but the tech team isn't in til Monday.......
More things
HELP!!!!!!!

-Unfortunately, no. I spoke a couple times with Adobe tech support via live chat (though 99% of the time I spent on there was validating that I owned their product and then telling me they had to pass me around to repeat ..) and then @AdobeCare helped me test a few things and it still did not work, so I went with a full Windows reinstall (and migrated from 7 to 8) to save me the headache.
I was avoiding the suggested OS reinstall due to saving time/headache, but the opposite happened.
It works fine other than 1 error in Win8 for me now.
-Yes I tried in selective startup and safe mode.
-According to everything I found, it wasn't actually related to licensing at all.
-Hardware setup did not change. Just installed Adobe Audition CC trial.
-Yes, both CS6 and CC managed to do the same thing.
-HOWEVER everything is working in my new Windows install, except Photoshop CS6 is now not updating, giving me this:
Photoshop 13.1.2 for Creative Cloud
Installation failed. Error Code: U44M1P7"
Any ideas?
Thanks,

Similar Messages

"Your license could not be validated"

I am a new subscriber to CC. Upon launch of Audition, I get the error message "Your license could not be validated. Audition must now shut down". Premiere and After Effects shut down on launch with no error message.
I have tried everything I can think of including re-installing the programs, and the solutions suggested in this discussion: https://forums.adobe.com/message/5913644#5913644
I have a full version of Adobe Premiere Elements 9 still installed on the computer.
Thank you for the help!
Regards
Sam

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

License could not be validated

I have Creative Cloud and I have this issue with Premiere and now Audition. I havn't been able to open anything since I bought this in October and I've been paying for it. All my tickets just get closed.

I've tried everything chat and tech support. I've tried reinstalling. Chat tells me they can't help I have to call tech support. Tech support trys messing with my drivers and spending 4 hours doing nothing. I've tried everything. EVERYTHING. I saw some posts on here with the same issue and they sent them help. So I'm waiting for that help to be sent to me. This is my last hope.

Licence could not be validated

Hi,
I've subscribed for CC and installed Audition CC, but upon start-up it shows an error message saying "Your license could not be validated. Audition must now shut down". I have tried uninstalling everything, then using the CC Cleaner Tool and installing Audition again, however the problem persists.
I have had trial versions of Photoshop and Audition installed before but I assume the Cleaner Tool should take care of any leftover files.
Thanks in advance for any advice!
Regards,
Michael

Hi SvenWolters,
Which OS are you using? Are you on a managed network?
Regards,
Romit Sinha

I can't start CS6 I get this error message "Could not initialize Photoshop because the preferences file was invalid (it has been deleted)." What do I do now??

When I try to start CS6 I get this error message "Could not initialize Photoshop because the preferences file was invalid (it has been deleted)." What do I do now??

Please refer:
FAQ: How do I reset my preferences?
Regards,
Ashutosh

Crystal Report failed because a free license could not be obtained

My question is about Crystal Report Standard (v. 10) and Crystal Report Professional (v.10)
Trying to print labels on from my application using Crystal Report Standard Edition (v. 10) and I am getting the follow error. And it doesnu2019t print any more.
"Crystal Reports job fauile because a free license coukd not be obtained in the time allocated. More licenses can be purchased direct from Crystal Decissions or thorough the Crystal Decisions Online Store"
If a run the same application on another server using Crystal Report Professional Edition (v. 10) and get this error, but the print after few seconds.
"A Crystal Reports job was delayed 2 seconds waiting for a free RDC runtime concurrente license to become available. More licencses can be purchased direct from Crystal Decisions or through the Crystal Decisions Online Store"
Is this happening because Standard / Professional differences?. It is any way to workaround on the standard edition and made print again with out reboot server. How many users can print at the same time?
Thanks for your help.

Hello Monica,
In your earlier posts you said the RDC was referenced in one of the licensing warning messages. The licensing warnings you've listed here would normally be seen in a Crystal Reports .NET application, not an RDC application. I don't see any details about your application though. More details about the actual application would be helpful. What type of application is it? Which Crystal component are you using? Which IDE did you use to create your application? How did you deploy the application? What type of keycode did you use to deploy? Is a full version of Crystal Reports also installed along with the runtime application? Also, please confirm whether or not this is a web or windows application.
Since these are CR.NET licensing warnings I'll address the errors and warnings related to the CR.NET object model.
Crystal Reports 10 Standard edition and Professional edition are not a development level products. These types of keycodes would not normally allow a runtime application to operate. You'd normally see the warning messages if you were using either a CR10 Developer, or CR10 Advanced Developer keycode when deploying a CR.NET application.
The CR.NET runtime licensing model has 3 Concurrent Processing Licenses (CPLs). This number can not be changed. CR10 Developer edition does not include queuing in it's licensing model, so when the 4th request comes in if the 3 CPLs are in use then the 4th request will fail with the "free license could not be obtained" error message.
CR10 Advanced Developer edition includes queuing in it's licensing model, so when the 4th request comes in if the 3 CPLs are in use then the 4th request will queue and test to find a free license every 2 seconds for approximately 2 minutes. In this case you'll see warning messages in the event viewer.
The 3 CPLs can not be increased - they're a fixed limit based on the number of CPUs on a particular web server. If you use a web garden or web farm and use load balancing then the number of CPLs increases as the number of CPUs increases. It's 3 CPLs per CPU.
There is no way to force the licenses to be freed up. This is handled by the CR.NET report engine. When the engine is finished using the license it is freed up automatically.
The Report Designer Component (RDC) does have a 5 seat model in CR10, but it does not follow the same queuing model seen with the CR.NET component.
Once you post more information about your application, and the Crystal Reports runtime component you're really using we can see if the above information applies or not.
Sincerely,
Dan Kelleher

A Crystal Reports job failed because a free license could not be obtained i

We have an enterprise application installed at a clients site where they have 10 CITRIX clients connecting to 5 APPLICATION servers (the servers are being load balanced). The application allows users to generate reports. The reports are generated on the APPLICATION servers. We have written some queued components which allow up to 5 reports to be generated at the same time. We have crystal reports XI installed on the APPLICATION servers. Currently we get the following error when users attempt to generate reports:
A Crystal Reports job failed because a free license could not be obtained in the time allocated
However if you change the queued components to only generate 1 report at any given time we do not get the error.
Any ideas on what could be causing this?
Thanks in advance.
Raman.

duplicate - please do not post multiple times

IPhone nike+ Sync - Data Could Not Be Validated By Server

Hi
I have been using my iPhone 3GS with cardio equipment at my local gym (TechnoGym Vario Series) which has built in docks that among other features, store workout data to the iPhone to sync with nike+. This had been working perfectly since I started using it last month.
In the past week I have been unable to sync any of my past 6 sessions to nike+ because I get the following error message:
"Your workout data could not be sent to nike.com because the data could not be validated by the server."
I understand how to access the xml files on the device and force a re-synchronisation by moving them to the "latest" folder, but the error message persists and none of my past 6 workout sessions will sync with nike+.
I have tried to sync the data on 2 different machines, one Windows 7 64-bit and the other Windows XP 32-bit but exactly the same error occurs. Both are running iTunes 9 which I suspect may have been what has broken this feature?
I really hope I can find a solution to this problem and would be grateful for any help. I am happy to provide any information required including copies of the xml files affected.
Many thanks.

Hi
I have had this response from nike plus and this cleared the error when uploading my runs.
Sometimes it happens that the iPod register the runs as already uploaded,after a not succesful uplaod.
Then the only way to upload them again is the following.
First you need to enable to view hidden files ( Control-panel >Folder Options>enable to view hidden files.)
1. Dock your iPod nano and allow iTunes to launch. Select your iPod from the device tree on the left-hand side of the screen in iTunes.
2. On the Summary page, make sure that "Enable disk use" is selected.
3. From your Start menu, navigate to Start > All Programs > Accessories > Windows Explorer. (Please note that this program is not the same as Internet Explorer, the web browser.)
4. In Windows Explorer, click Tools > Folder Options and select the View tab. Make sure that "View hidden files and folders" is selected.
5. Find your iPod nano in the device list under "My Computer." It will appear as an external drive; mine, for example, is Drive E, and it's labeled "Your iPod." Yours should have a similar name. Click on it.
6. Navigate your iPod nano's folders as follows: iPod_Control > Device > Trainer > Workouts > Empeds. In the Empeds folder, you'll see one or more subfolders with alphanumeric filenames. These filenames correspond to your Nike+ sensors. Explore the folders until you locate the one containing the runs you'd like to manually re-upload. They'll probably be in the "synched" folder within your most recent sensor's folder.
!!!!!!!!!!!Important ,you need to delete the settings.plist file in the sensor folder which stores your login information to make sure for next time you will upload to the correct profile
7. Drag and drop each run folder you'd like to manually re-upload from "synched" to "latest."
8. Eject your iPod nano and close iTunes.
9. Dock your iPod nano and allow iTunes to launch. Your run data should upload
Hope this helps.
C

Claims Based Authentication SPSecurityTokenService.Issue() failed: The security token username and password could not be validated.

Please excuse the lousy table...Its late :-)
I have a multi-server SP2010 farm. Patched up to
Configuration database version: 14.0.6106.5002
My goal is to have a claims based web application that authenticated to ADAM for Extranet. I have configured the servers exactly to MSDN and technet specs (following this spec to the
letter (
http://technet.microsoft.com/en-us/library/ee806882.aspx) to allow the forms side of the web app to authenticate to ADAM.
IT WORKS IN DEV!!! , which is a single server farm. However, it does not work in production. I get the following:
Claims Auth log entries:
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
f2ut
Verbose
Authenticated with login provider. Validating request security token.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Using membership provider 'ADAMProvider'.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Doing password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Failed password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Unexpected
Password check on '[email protected]' generated exception: 'System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security
token username and password could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
fo1t
Monitorable
SPSecurityTokenService.Issue() failed: System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password
could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
fsq7
High
Request for security token failed with exception: System.ServiceModel.FaultException: The security token username and password could not be validated.
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
  at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo)
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
8306
Critical
An exception occurred when trying to issue security token: The security token username and password could not be validated..
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
f2un
Verbose
Form authentication failed.
I have tried EVERYTHING (well, nt everything, I don’t have the fix I suppose).
I found plenty out there and nothing directly correlates with this issue.
I searched on all parts of the errors I got.
This contains an interesting blurb about setting up access for the apppool id correctly.
That’s not the case for me. It works in dev and the same id are used there.
http://sharepoint-2010-world.blogspot.com/2011/03/adam-forms-based-authentication-in.html
This was good but it doesn’t give specs on what the environment looks like:
http://social.msdn.microsoft.com/Forums/en/sharepoint2010general/thread/557143a6-4b36-4939-bb7f-d62a9335fd18
The was interesting…but I am patched up beyond the June 2011 CU so it’s a moot point:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/9b8368ef-c5e5-4ead-b348-7b2b5587cfc8
Any and all help would be greatly appreciated!

Hi.
You say its a multiserver farm, do you have more than one web server then?
If thats the case, have you tried accessing the site on each server directly?
Found this for you, maybe that can help?
Troubleshooting Exceptions: System.ServiceModel.FaultException`1
http://msdn.microsoft.com/en-us/library/bb907220.aspx
and this:
SharePoint 2010 Claims Authentication - The security token username and password could not be validated reoccurring every morning
http://social.technet.microsoft.com/Forums/pl-PL/sharepoint2010setup/thread/383f1f9b-5c4a-4e19-b770-2a54b7ab1ca1
and
This seems to be a good guide:
http://donalconlon.wordpress.com/2010/02/23/configuring-forms-base-authentication-for-sharepoint-2010-using-iis7/
Good luck
Thomas Balkeståhl - Technical Specialist - SharePoint - http://blksthl.wordpress.com

I can not open adobe acrobat pro. It say my license can not be validated. Can someone help me?

i receive a message that says my license can not be validated. can someone help me

What version of Acrobat Pro? What system? Full message? Is this on install or just suddenly when using?

The filter expression is on external data and could not be validated.

The filter expression is on external data and could not be validated. It may not be supported in Web browser forms.
I am reciveing this error in my infopath 2010 browser form when I am trying to filter a drop down list from sharepoint.
I thought filters were available on infopath 2010 browser forms or are they only available from values inside the form?
I did have a look around the forums but only could find this error occuring during beta stage.
Thanks

Ok, so you shouldn't be filtering in the form, because that means it downloads the entire list first and then filters out the items. That's client-side filtering. What you want to do is server-side filtering by doing a parameterized query.
Set the data connection NOT to automatically download
Add Form Load rules that do the following:
First, "Set a Field's Value" and set the position query node of the data connection to the value of "manager" (whatever the exact syntax is)
Then query the data connection
Doind this should make it ONLY download items where position=manager instead of downloading all items and filtering. This is a much better practice and was not even available in 2007, so you should make full use of it in 2010. Even so, what you
were doing should have worked anyway, so I'm not sure what's going on there.
When you do the filtered dropdown, your Source field should be the repeating group of the data connection, not the property itself. The property should only be selected in Value and DisplayName. The group should be in the Source field, and THAT'S
where you apply the filter.
SharePoint Architect || Microsoft MVP ||
My Blog
Planet Technologies ||
SharePoint Task Force

Web Service in EnterpriseOne: Credentials could not be validated

I am trying to run one of the lab exercises to test the address book web service. While testing this web service; I am getting the following error in the SOAP response XML when nothing is passed in the WS-Security :
<faultstring>Internal Server Error (Caught exception while handling request: java.lang.RuntimeException: Credentials could not be validated from message or from configuration file.)</faultstring>
Whenever I pass in my user/id password; I get the following message in the response XML:
<faultcode>env:MustUnderstand</faultcode>
<faultstring>SOAP must understand error: {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security</faultstring>
I am new to web services and am unsure of what setup is missing in or outside of EnterpriseOne. I will really appreciate if someone could shed some light on this.

It's worth checking that security has been enabled for the web service. I seem to remember that I had to do this when I got the same error a while back.
In OAS, log onto the Enterprise Manager on your OAS server and select the OC4J instance that contains the Business Services Server. Click on the Web Services tab and then select the Web Service that you're trying to test (eg: RI_AddressBookManagerHttpPort). Click on the Administration tab and if the Security feature is not enabled then press the Enable/Disable Features button, move Security across to the Enabled Features pane and press OK.
Back on the Administration tab, select the Edit Configuration icon for the Security Feature, and press the Inbound Policies button. Ensure that the Use Username/Password Authentication checkbox is selected. The Password Type should be Plain Text.
You shouldn't need to bounce the OC4J instance.
I'm not sure about Websphere without doing more research, but I imagine there must be a similar option.
Good luck,
Dave

"Credentials could not be validated" Error - Weblogic deployment of BSSV

Hi All
I am a long time integrator with little JDE experience.
I am tasked with getting Business Services published from JDE Business Functions.
I have followed the MTRs and have Weblogic 10.3 on a Windows 2008 64 bit server.
JDE is E812 with tools 8.98 4
The Management Agent is installed and on the Server Manager, the Business Services Server was created.
A business function has been written and after following the steps from both the Business Services Dev guide and a presentation from openworld, the function was built into a published Business Services.
Now, when this is tested, both from the JDeveloper Integrated Server and from the Weblogic described above, the following error occurs:
"Credentials could not be validated from message or from configuration file"
Can anyone suggest why this happens? Are there deployments missing from my J2EE?
Apart from the deployment from the Jdevelopper, a complete build of the ear has been done and deployed on the managed server, but this gives the same error.
I have checked that the jdbj.ini is installed correctly and that the details are correct in there.
Any help would be appreciated.
Thanks,
Ryan
Edited by: 912783 on 2012/02/10 5:46 AM
Edited by: 912783 on 2012/02/10 6:21 AM

Hi
We managed to get this working, but it is almost impossible to say what went wrong in the first place.
Basically, we began a fresh install with a new domain and following the docs everything came right!
there was no need to go into the JDE DB tables though.

Could not create validator

All of a sudden I am unable to create a record with a JSF page, the error I am seeing in the console is the following:
WARNING: could not create validator for validatorId:null and binding:#{bindings.KenmerkRegister.validator}
Jun 5, 2007 2:22:09 PM oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
SEVERE: attribute 'validatorId' is missing
(and so on)
What does this mean? I cannot find it anywhere.....

frank ,i meet the error too . there are three .
1.can not create validator
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
严重: attribute 'validatorId' is missing
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag doStartTag
警告: could not create validator for validatorId:null and binding:#{bindings.sQuoteId.validator}
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
严重: attribute 'validatorId' is missing
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag doStartTag
警告: could not create validator for validatorId:null and binding:#{bindings.sBrokerId.validator}
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
严重: attribute 'validatorId' is missing
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag doStartTag
警告: could not create validator for validatorId:null and binding:#{bindings.sCustomerId.validator}
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
严重: attribute 'validatorId' is missing
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag doStartTag
警告: could not create validator for validatorId:null and binding:#{bindings.sQuoteDateStart.validator}
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
严重: attribute 'validatorId' is missing
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag doStartTag
警告: could not create validator for validatorId:null and binding:#{bindings.sQuoteDateEnd.validator}
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
严重: attribute 'validatorId' is missing
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag doStartTag
警告: could not create validator for validatorId:null and binding:#{bindings.sStatus.validator}
2007-6-16 15:29:37
2.can not init af:selectOneChoice
oracle.adfinternal.view.faces.renderkit.core.xhtml.SimpleSelectOneRenderer _getSelectedIndex
警告: Could not find selected item matching value "-1" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=_id15]
3.and when i click a commandButton to invoke an action , occur the following error,
51079 [HTTPThreadGroup-5] ERROR lifecycle.InvokeApplicationPhase - execute: oracle.jbo.uicli.jui.JUActionBinding.execute(javax.faces.event.ActionEvent)
javax.faces.el.MethodNotFoundException: execute: oracle.jbo.uicli.jui.JUActionBinding.execute(javax.faces.event.ActionEvent)
     at com.sun.faces.el.MethodBindingImpl.method(MethodBindingImpl.java:226)
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:144)
     at oracle.adf.view.faces.component.UIXComponentBase.__broadcast(UIXComponentBase.java:1087)
     at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:204)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:287)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:401)
     at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:213)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:620)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

Plz help !!!Error ORA-04023: Object could not be validated or authorized

Hi Folks,
Came across this error in AWR reports production oracle 11gR2 database. Did anybody come across this error before or has any idea on this. Pls respond
ORA-04023: Object SELECT SUM(VALUE), COUNT(INSTANCE_NUMBER), SUM(INSTANCE_NUMBER) FROM DBA_HIST_SYS_TIME_MODEL WHERE DBID = :B4 AND SNAP_ID = :B3 AND INSTANCE_NUMBER MEMBER OF :B2 AND STAT_NAME = :B1 could not be validated or authorized
thanks

928912 wrote:
Hi Folks,
Came across this error in AWR reports production oracle 11gR2 database. Did anybody come across this error before or has any idea on this. Pls respond
ORA-04023: Object SELECT SUM(VALUE), COUNT(INSTANCE_NUMBER), SUM(INSTANCE_NUMBER) FROM DBA_HIST_SYS_TIME_MODEL WHERE DBID = :B4 AND SNAP_ID = :B3 AND INSTANCE_NUMBER MEMBER OF :B2 AND STAT_NAME = :B1 could not be validated or authorized
thankswhat did you do to break this?
bcm@bcm-laptop:~$ oerr ora 4023
04023, 00000, "Object %s%s%s%s%s could not be validated or authorized"
// *Cause: A number of attempts were made to validate or authorize an
// object but failed.
// *Action: Please report this error to Oracle Support Services.

CS6 & CC Instantly Close, Audition "License could not be validated"

Similar Messages

Maybe you are looking for