CS6 Clone stamp problem

I'm trying to cover up some blown out flash reflections using the clone stamp (100% opacity) on a JPG image. However, I'm only getting an ugly brown spot where the reflection is, instead of covered up pixels. What am I doing wrong?

Hi! Often when users have problems with the Clone Stamp tool, it has to do with layer arrangement and layer options. Are you painting with the clone stamp on the same image layer, or on a transparent layer on top of the original image? You might try checking the Clone Stamp sampling options (see screenshot) to make sure the selected sampling option matches your workflow.
Hope this helps!

Similar Messages

Intermitent clone stamp problem

have been making extensive use of the clone stamp with some photo
repairs and occasionally I will get a line of pixels that will move
diagonally across the picture misplacing themselves. It is rather like
having a snag you don't know about that pulls itself while you are
plucking off a piece of lint elsewhere on the garment. I hope that makes
some sense. The line is quite wide. Of course I am working well zoomed in
but that should not cause any odd effect. It is as if it does it on its
own. Have dealt with it by making a new level or turning off the machine.
Not sure there is any relationship there. The whole thing is annoying, however
so if I am causing it, I'd love to stop it! Thanks for any help. Will search for
an example to attach later. First time here, didn't know I could.

Hi John
Ok, I'm just a bit proud of myself. I have successfully installed 11.0.1!
For you that is no doubt nothing but to me it's a YIPPEE!
here is the information minus the serial number that you asked me to copy and paste here:
Adobe Photoshop Version: 11.0.1 (11.0.1x20090218 [20090218.r.523 2009/02/18:02:00:00 cutoff; r branch])
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 1
System architecture: Intel CPU Family:6, Model:15, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 2
Processor speed: 1995 MHz
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce 8600M GS/PCI/SSE2
OpenGL Drawing: Enabled.
Video Card: NVIDIA GeForce 8600M GS
Video Mode: 1440 x 900 x 4294967296 colors
Video Card Driver: nvd3dum.dll,nvwgf2um.dll
Driver Version: 7.15.11.0123
Built-in memory: 2046 MB
Free memory: 709 MB
Memory available to Photoshop: 1657 MB
Memory used by Photoshop: 60 %
Image cache levels: 4
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS4\
Temporary file path: C:\Users\Paula\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 140.7G, 59.9G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS4\Plug-ins\
Additional Plug-ins folder: not set
If you need the list of installed components I can send that too but this looks like more than you asked for as it is. The program I have is Design Premium although I'm not sure that is meaningful information for this problem.
Thank you, by the way, for teaching me something today and for giving me a chance to get a confidence boost! You're great!
Paula

Clone stamp problems

For some reason I can no longer use the Clone stamp option correctly. The Mode option allows me to choose only from Dissolve or Behind, but I cannot set "Normal" mode, it does not even appear on the list. If I try to clone, the stamp pixelates and destroys the part of the image I am trying to clone. If I select the Pattern stamp, then "Normal" does appear.
Elements 10, Windows XP
I would appreciate your help.

Sounds like the scroll bar is missing.
Do you see the other blend modes below Behind such as Darken, Multiply etc?
Three ways you can get Normal mode:
1. use the arrow keys on the numeric keypad to sroll thriough the blend modes
2. press an hold were it says dissolve and move the mouse up. That should reveal the Normal mode.
3. press Shift+Alt+N to get the normal mode.
I had that problem on xp with photoshop elements 7 and here's what fixed it, bringing back the scroll bar:
(it says for the type tool, but it should work for the brush mode list as well)
http://helpx.adobe.com/photoshop-elements/kb/scroll-bar-missing-font-list.html

Clone Stamp Problem

When using the clone stamp it has just started moving the whole picture rather then sampling and painting the sampled area. Help, What do I do to correct this. I already tried restarting and it hasn't helped.

Do you still see the clone stamp cursor (circle) or do you see a hand instead? If the latter, the space bar is the shortcut for the hand tool, no matter which other tool is active. Give your space bar a whack to free it up.
If you still see the circle, then go to the upper right of the tool options area and click the four lined square (for PSE 11 or 12) or to the far left of the options bar and click the tiny triangle or tool symbol (for older versions) and choose Reset Tool.

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed?

Problem using the clone stamp tool in cs6 64 bit

I am trying to use the clone stamp tool, however each time I alt click on a PC runing system 7- 64 bit and try to clone an area, I get a window stating that I have not defined an area. Alt clicking again does not solve the problem. I work in a computer lab and this option works fine on our Macs using option click in PS CS6.

If »Show Overlay« is checked in the Clone Source Panel is the cursor showing the source imagery?
Could you please post a screenshot with the pertinent Panels visible?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Clone Stamp Selection Failure in CS6

I try using the clone stamp but selection fails with this error message:
Could not use the clone stamp because the area to clone has not been defined (Alt-click to define source point).
When I press Alt, I see the characteristic selection bullseye. But, afterwards, a right-click of the mouse reveals an open circle and the error message.
I note that the key works for menu selections (e.g., Alt-File) and other actions.
I have closed PS and re-opened. Reset the clone stamp tool, closed and reopened, etc., to no avail.
/Roger

Mr. Kelly,
That seems to have fixed the problem: left-super+alt. I can live with that!
Regarding the suggestions about remapping - look-and-feel, etc.: the suggested track are not avialalbe under Xubuntu 12.04. And, I would be reluctant to re-map the super-key since it has functional significance when running Win (I have both Win-7 and XP in VMs).
I've bookmarked the wine wiki link for future reference.
WINE: Do you know if CS6 / Bridge / Adobe Raw, etc., work well? I had not thought of trying Wine. I've never had luck with it in the past - a waste of time for few apps that I must run in Win. Since I've got PShop working well in a VM, I'm thinking of sticking with that and not to invite new problems.
Thanks a lot for delving into this for me.
Glad I bought PShop - I've been using The Gimp for a long time but, while taking PS classes at Montgomery College, decided to buy. I'd been looking for knowledge/tips that might help in Gimp but, during the second class, decided to make the leap.
Best regards,
/Roger

Problem with Clone Stamp & Healing Brush

Once set the sample point by option clicking with either the clone stamp tool or the healing brush, I suddenly see a duplicate layer that moves with the cursor as I try to position it oveer the spot I want to fix.
I have tried resetting both tools. I am running CS6 and have experienced no other problems.
Any ideas what's wrong?

Hi RedMo53,
Your seeing the clone source overlay and you can adjust the preferences for the clone overlay by going to Window>Clone Source.
You might try clipped and see how that works.
more info:
http://helpx.adobe.com/content/help/en/photoshop/using/retouching-repairing-images.htmlhtt p://

Problem with clone stamp

Hi
Problem with Photoshop CC on PC
When I try to use clone stamp near the border of the picture it copies wrong area. It always take the border when I choose near the border. I try to do the same in my old copy of CS6 and there it worked properly on the same picture.
Is this new version of Photoshop a crap???

<moved from Adobe Creative Cloud to Photoshop General Discussion>

CS6 - Screen goes black when trying to crop & clone stamp screen goes polorized when using

I run Photoshop CS6 on a windows 7 machine. It has started having two problems:
First, when trying to crop, as soon as I release the mouse button after blocking the frame to crop, the screen goes black - No controls, no picture, nothing. I have to close Photoshop and restart to get back to the photo.
Second, when using clone stamp, as I click to clone the photo switches to odd colors (almost like it was polarized). The color returns to normal when I release the mouse button.
What is going on and what do I do?
Thank you,
Mike Modlin

Update your video card driver from the GPU maker's website, or disable GPU drawing in Photoshop if you cannot update the driver for some reason.

Is there anyone having problem with Clone Stamp in CS4?

Good Morning, I am using Photoshop CS4 Extended with Windows Vista Ultimate 64 bit. My computer is a Dell XPS 430, WITH 8GB of ram, 1.5TB of disk space, ATI Radean HD 4800 Series adapter with 512MB memory. When I bring up an image in Photoshop and click on Clone stamp I get the error message "could not use the clone stamp because of a program error." I can still use Clone Stamp, but with some wied reults. Sometime the middle of the brush turns bright white and do nothing. Again it will clone the item clicked on, but would move the spot being cloned. Other times when the brush is move from the spot being cloned it will clone other area without cliking on them.
I have uninstalled and reinstalled Photoshop 4 times. I have created a new account with administrative rights, which I unistalled and reinstalled Photoshop. Two of the times that I uninstalled Photoshop I also used the Photoshop script to make sure all of Photoshop were uninstalled. I have also cleaned the register of Photoshop before reinstalling Photoshop. Another item used to make sure there was no error with Vista was Windows cleanup installed tool.
Yesterday I checked my laptop and I am getting the same results as my PC. The most recent thing that has been updated on both the PC and Laptop was Windows updates and Camera Ram 5.4. Attached is a copy of a wierd result using clone tool. I just clicked on the image and the orange spot appeared. Is there anyone else who is having similar problems with Clone Stamp?

Have you applied the Photoshop 11.0.1 Patch?
Have you updated the video drivers?
If that doesn't help, try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

Problem with clone stamp in Photoshop 8 and 9

Whenever I use the clone stamp it may work alright for a while,but then it starts doing odd things like shooting off lines or dots but not the spot I had cloned. Then I have to undo the marks it has made and hope it will work right the next time. It has done this on Photoshop 8 and 9. Is this a known bug? Can anyone shed light on this problem?

George I tried your suggestion and the same thing occured. Funny thing is my original script would work ok in 9 Pro but not 9 Reader. Through trial and error I found that if I commented out 'oDoc.closeDoc();' the script worked perfect in both 9 Pro and Reader- all attachements printed.
I have tested in 7, 8, and 9 Reader and only tested in 7 and 9 Pro. Eveything works fine.
Very odd.
Does anyone know if I will run into issues not closing the documents , or are they closed automatically after printing? I don't want to run into memorty isssus down the road.
Thanks in advance for all the advice,
-Bill

Cs6 on mac 10.9 clone stamp/brushes not responding after 2 minutes used?

Using mac 10.9 and cs6. Clone stamp, brushes and all other tools stop responding after about 1 minute of using. With the clone stamp for example, you can see the part you are trying to clone in the crosshairs but they do not transfer?? What is happening?

How much system RAM and VRAM do you have?

A problem using clone stamp tool

Hi guys,
I use After Effects CC last version on a pc under windows 7 ultimate..
This problem must be simple to solve but I just don't see how.
I have an aerial view of the Vesuvio. The volcano makes a 10 to 15° circular motion due to the helicopter moving.
I need to eliminate the actual houses and other trails on the border of the crater to have my volcano as it was 2000 years ago when it erupted and destroyed Pompeii.
I succeeded to do that with the clone stamp tool without a problem and it takes of course into account all the different shades of earth on the cliffs of the volcano.
But when I preview the shot, while the volcano moves, I can see the stamped touches of paint moving as if floating above the volcano. The older surface is not visible as I wanted but the new one does't follow the movement. I'm sure I forgot to do something but what? Should I do the clone stamp in conjunction with motion tracker, if so how? I tried once but got the same problem.
Thanks in advance
Claude

OK, I see a bunch of painting on the nearest slope of the volcano that does not track with the shot. Your biggest problem is workflow using the clone stamp. You are just not using it properly. If it were me, the first think I would do is to use the After Effects tracker to stabilize this part of the volcano so that it didn't move in the frame.
Now you only have perspective issues to deal with.
Next I would duplicate the stabilized layer, pre-compose the duplicate moving all attributes to the new composition, name the preComp - clone or paint pre-comp, then open the pre-comp in the layer panel and use the clone stamp to repair the parts of the image you want to repair. You can then add other trackers for the parts of the image you want to clone or use a time offset to make your painted layer match the mountain.
I probably would do something completely different. I'd export the middle frame of this move as a Photoshop file, then go in and paint the mountain the way I wanted it to look. I'd mask the background in photoshop so I only see the sides and face of the volcano. Then I'd bring my painted mountain back into AE and animate distortion, scale and rotation so the painted layer matches the original perspective on the shot as close as possible. When that is done I'd go back to my main comp, add a null, tie the null's position to the anchor point of the stabilized footage, then parent the original copy of the footage and the painted copy to the null to put the camera movement back in the scene.
Here's a tutorial on how to apply tracking data to a clone stamp in AE:
Removing an Object with Clone Stamp - After Effects Tutorial
I am pretty convinced that you added the smoke... Use the same procedure to get the smoke to look right. It's also floating in an unnatural manner. You could also replace the far background with a matte painting of the city using the same mask, duplicate, paint in Photoshop, then distort and remove the stabilization.

Problem with my Clone Stamp

Hi, All of a sudden my clone stamp is acting strange.
I now have TWO " problems.
1st problem is that as i enlarge the clone stamp, enlarge the circle, less of it is visible ?
2nd problem, when i open a .jpg and position my mouse over an area i want to clone and click "ALT" and then move the mouse to the point i want to clone over, the "layer" moves with the mouse so i can never get to clone the area in question
The image in the bottom corner is moving around with my mouse ??? Help

Open the Clone source panel, and uncheck Show overlay

CS6 Clone stamp problem

Similar Messages

Maybe you are looking for