Cs6 control panel is grayed out can't input into control panel

need to reset control panel in cs6

Try hitting the Escape key. If this works there was a modal dialog open off screen.

Similar Messages

  • All my components are grayed out in multisim11. Path to my config file in global preferences is also grayed out, can't change to standard cfg

    all my components are grayed out in multisim11. Path to my config file in global preferences is also grayed out, can't change to standard cfg
    Solved!
    Go to Solution.

    Hi Escapermark,
    Have a look at these knowledge base articles, the first one should fix the gray out problem:
    http://digital.ni.com/public.nsf/allkb/609A763289E6E81D8625739F0052151F
    http://digital.ni.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F
    http://digital.ni.com/public.nsf/allkb/B3D720348D55D0C5862575BA00560908?OpenDocument
    Tien P.
    National Instruments

  • Making a jframe that i can put input into....

    hey guys i was wondering if i could have a very easy beginer code sample ofr making a small jframe that i can put input into....and can we display our own home written code on the forums i checks the conduct thingy but it didnt say...tyvm for the help
    System.out.println("JAVA FOR LIFE!!!");

    [http://java.sun.com/docs/books/tutorial/uiswing/index.html]

  • Have a 2nd gen nano and all music is grayed out, can't create playlists or manage library

    I've updated  to the latest iTunes SW and now all music is grayed out on my iPod.  I have restored and still no luck.  Any ideas?

    The file wasn't locked. I just can't figure out how all the music is closed off from making any adjustments. Thanks for the suggestion.
    Chad

  • "Enable Disk Use" checkbox is grayed out, can't untick.

    Hi,
    I just got my new iPod 30 GB video today! I've been reading these discussions, but haven't found an answer for this tiny problem of mine.
    "Do Not Disconnect" constantly shows on the iPod screen when it's connected on the computer. Many have suggested ticking off "Enable Disk Use", but here's the problem: it's grayed out, and I can't change it, no matter what. I've gone through iTunes prefs, by right-clicking on the iPod in iTunes and selecting "iPod Options". My system seems to show iPod as a movable disk, but iTunes recognises it and I can easily put music into it, so I guess that isn't a problem (or is it?).
    But how could I get my hands on the "Enable Disk Use" checkbox? It just isn't "tickable" now.
    Thanks!
      Windows XP  

    If you have your iPod set to manual update, the "Enable Disk Use" box will be greyed out and ticked by default, in that case use Safely remove Hardware icon or check this link: "Disconnecting iPod from your computer
    " http://docs.info.apple.com/article.html?artnum=61135
    For Info:
    The iPod offers three ways to transfer music from your computer. You can select one of the following update modes from the iPod Preferences menu in iTunes (Edit=>Preferences=>'iPod' tab):
    1) Automatically update all songs and playlists. This is the default mode, in which your entire music library, including playlists, is automatically synced to your iPod. If the music library on your computer exceeds the iPod storage capacity, you are prompted to select a different update method.
    2) Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer.
    3) Manually manage songs and playlists. You can also choose to transfer music to the iPod manually. This allows you to drag and drop individual songs and playlists from iTunes to the iPod.

  • Why is my safari quit grayed out/ can't quit safari

    Why is the ablility to quit safari on my mac air grayed out?  can't quit safari - not sure what happened

    Because there's a dialog box open which needs to be dismissed before it can be quit normally. If desired, choose Force Quit from the Apple menu and shut Safari down from there.
    (79292)

  • CS6 Master Collection update grayed out

    Hello all:
    After a major system update of my 2010 Mac Pro 12-core where I have two startup drives (one with Lion and the other Yosemite), I did a complete uninstall of CS6 master collection applications on both drives. Upon doing the reinstall successfully on Lion without problem other than serial number issues (ultimately solved) and updated fine, when I did it on the Yosemite drive only Acrobat (which updates alone) could update. All other applications on Yosemite have 'update' as grayed out. Any ideas anyone?

    Ignore it. That's just generic technobabble/ marketing talk. There are just no separate blurbs for PC and Mac...
    Mylenium

  • Brush Tip Shape option grayed out, can't uncheck it.

    The "wet edges" selection in my "brush tip shape" options is grayed out.
    I can't de-select it from the left side of the Brush window.  I've tried closing and re-opening Photoshop, and re-booting my computer, but it comes back the same way every time I open the program.
    I am running Win 7 on a Dell with lots of memory and a decent video card.
    FWIW -- the color model in the file is RGB. I'm aware that Index Color upsets brush tip options, but
    that's not been the case here.

    Okay, FWIW -- For Whatever It's Worth -- ran Adobe Photoshop Updates today (had to go to the Help > Updates pull-down from the top menu, the Creative Cloud Updater didn't work -- and the option is no longer grayed out/locked in.I
    Frustrating while it lasted.
    I use brush-stroke to turn vector paths into lines fairly often, so I'm glad this is finally fixed.

  • HT1695 my wifi "on" switch is grayed out, can't turn it on

    how can I fix my grayed out on for wifi?

    Read here, should help.
    http://support.apple.com/kb/TS1559

  • Log & Capture Title Field Grayed Out/Can't Write

    While logging clips from a mini-dv tape (in Log & Capture), I clicked in the title field and that field suddenly grayed out and I cannot write in the title field. My temporary solution is to check "prompt" so that I can write titles for clips after I log them. Log and Capture work fine as does everything else in FC 7. I tried trashing prefs but no luck. Any suggestions or solutions out there?
    Thanks!
    JDH

    Well, I can accept that that's normal, although I'd say it's nonoptimal UI design, since it made me think I was onto my problem.
    Which still exists as described in initial post. Any ideas, anyone?
    Thanks.

  • Mail: Certain emails grayed out, can't delete them

    Strange one...
    Mail version 3.6 running on a PPC Quad, OSX 10.5.8
    A while ago I had a convoluted situation where I was receiving emails from two different mail servers, both of which had my email address registered with them (don't ask! ) so for a while I was receiving two copies of each email. After resolving the situation with the ISP's I deleted the account in Mail that was receiving mail from one of them. What I was left with was a strange situation where all of the duplicate messages remained on my system but don't seem to be associated with an email account. When I attempt to open a duplicate email, the message window is completely blank. And when I try to delete a duplicate, the message grays out. Can't be deleted.
    I want to migrate the mailboxes on this older system to my new MacPro, but I'd like to clean up this mess before I do. Any advice on how to permanently delete these phantom emails would be most appreciated!
    Thanks.

    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup

  • CS6 FILTER GALLERY is grayed out. I re-loaded CS6 but still grayed out.

    I've been using CS6 since it came out and this has never happened.  Don't know what to do about it.  Thoughts?

    Many filters work only on 8-bit images, so the filter gallery would be grayed out if you had, say, a 16-bit image open and selected.

  • Help, I am about to pull my hair out, can't get into a locked drive and Time Machine problem

    I've screwed everything up, I think.  I had Time Machine doing backups to an external 500Gig drive and somehow it got locked.  I went into Get Info to try and change the access but it won't allow me.  On top of this problem, my original drive died and I can't get into Time Machine to restore.  When I click "Enter Time Machine", nothing happens.  I created an eDisk and a startup disk to another external drive that I'm using now, but since everything that's been backed up is on the other drive that I can't access.  When I try accessing the drive it gives:  "The folder “G-DRIVE ” can’t be opened because you don’t have permission to see its contents."  I'm not knowledgeable enough to work from the command line, so if I need to do that to access the drive, please walk me though it.  As for the Time Machine problem, I have no idea how to recover anything since it won't even come up, it just sits there.  Outside of blowing my brains out, I don't know what to do.  Any help would be greatly appreciated as I can't afford to take it to Apple to let them try and fix it.

    Hello, not sure how this might affect a TM drive, or not, but...
    Here is what i needed to do for my drive "320GB HD", the last command is just for clean up
    Open Terminal and type these commands carefully with the spaces & change 320GB HD to the name of your drive.
    sudo chflags 0 "/volumes/320GB HD"
    sudo chown root "/volumes/320GB HD"
    sudo chmod 1775 "/volumes/320GB HD"
    sudo -k
    That said, these should be sufficient to do the job:
    sudo chflags 0 "/Volumes/320GB HD"
    sudo chmod a+rx "/Volumes/320GB HD"

  • Some online ads grayed out, can only use in dial-up mode not broadband how can I fix this problem?

    Hello,
    I have Windows 7, Internet Explorer 11, the latest version of Flash Player and I have DSL to connect to the interent.  However, when I try to look at online ads in Walgreens and Walmart I cannot get past the first page.  There is light gray over the ad and the only way I can access is to change to the dial-up mode.  Other store ads no problem Flash Player working fine.  Tried contacting stores for help their online staff said they would look into, but I received no help, this is been happening for a long time now.
    Anyone with any idea how to fix this problem I would appreciate the help.
    Thank You,
    SB

    Compatibility view:  http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    Disable Hardware Acceleration: http://forums.adobe.com/thread/891337
    Those would be the first two to try.

  • I have a imac with a NVIDIA GeForce GTX 780M 4096 MB 32 GB CUDA grayed out Can somone help?

    I have a imac with a NVIDIA GeForce GTX 780M 4096 MB 32 GB I downloaded the CUDA Driver Version: 6.5.46 but I still dont have the option in after efects to use the CUDA for beter permance ? Can somone help?

    Hi Nick,
    Nick Politis wrote:
    I have a imac with a NVIDIA GeForce GTX 780M 4096 MB 32 GB I downloaded the CUDA Driver Version: 6.5.46 but I still dont have the option in after efects to use the CUDA for beter permance ? Can somone help?
    After Effects uses your CPU and RAM Primarily, not the GPU.
    You only need NVIDIA CUDA for one function: the acceleration of ray-traced 3D compositions. Your newer Maxwell NVIDIA GPU does not contain the OptiX Library necessary for this function so it will not ever work for accelerating ray-traced 3D compositions. Sorry.
    The After Effects team is no longer working on this feature and suggests that you use Cinema 4D Lite (bundled) for your 3D work instead. There are also some great third party options for adding 3D elements to After Effects compositions like Invigorator Pro and Video Copilot Element 3D.
    Hope that clears things up.
    Thanks,
    Kevin

Maybe you are looking for