CS6 crop and straighten causes error message - "An error has occurred"

Running CS6 on a windows 7 desktop machine. When I try to crop and straighten a 4 image scanned image I get "An error has occurred" I do not get this error on my laptop. I have uninstalled and re-installed CS6 with no change in error message. I have reset the preferences and still the same error. Any suggestions?

Starting Photoshop without plug-ins solved the problem. Is there a way to
find out which plug-in is the problem? Copy them to another folder and add
them one at a time back into the plug-in folder until the problem re-occurs?
Bob
On Sun, Feb 22, 2015 at 6:17 PM, Benjamin Root Photography <

Similar Messages

The Webmail version of Lotus knows keep giving the following error message: A problem has occurred which may have caused the current operation to fail. How do I fix this?

I downloaded the new version of Firefox.
Now, when I try to access my webmail from Lotus Notes (at https://webmail.WorldVision.org) the following message shows up when trying to preview my inbox.
"A problem has occurred which may have caused the current operation to fail."

Actually, this isn't a cache problem, it's an issue with iNotes and Firefox 4. I found the answer in comments at a similar question. See:
https://support.mozilla.com/en-US/questions/798271#answer-153202
I downloaded the Remote XUL Manager add-on for Firefox (https://addons.mozilla.org/en-US/firefox/addon/remote-xul-manager/), restarted FF, went to Tools and scrolled down and clicked on "Remote XUL Manager." I clicked "Add" and pasted the URL for the link where I log-in to Lotus Notes into the dialogue box, and ta-dah! Back to email. Took me longer to type this than fix the problem.

Crop and Straighten Photos in CS6

I open a 8"x10" jpeg or any other photo then go over to FILE menu and drop down to AUTOMATE then over to CROP and STRAIGHTEN PHOTO,S
Now what happens is that three other copies appear copy ,copy 2 copy 3 .
My original is OK at 8"x10" followed by the copy being 5"X7" then copy2 is about 1/2"x2" and copy 3 is about 3/4"x3/4"
I think this is being caused by interaction with CS5 as the same happens there.
CS4 is all OK this not being affected.
Now in CS4 i can crop and straighten but in CS5 and CS6 nothing can be done.
Kip

OK, here's the scoop: the feature in File>automate>crop and straighten is designed for those who scan in several photos with white space between them. It will make it's best attempt at separating each photograph by looking for the white space around them. It will then crop each photo to the edges it determines and make each straight based on the detected edge.
It is not designed to straighten the image in a photo. If you run this on a photograph, it is looking really hard for white space and will make its best attempt to separate what it thinks are independent items or photos and save each to a file.
If you want to straighten an image, go to the ruler tool and draw a line and choose straighten layer to get a rotation only, or go to the crop tool and select straighten, and draw a line that you wish to be the horizontal. This one will crop also.
I hope that clears up the issue.
Pattie

Photoshop CS6: Auto Crop and Straighten work wrong (EDIT)

Hello together,
I use the Creative Cloud for Students (German) and have make for some days an update of my programs like Photoshop CS6.
Since today the option of automatic crop and straighten makes some big problems.
Edit:
I make following Steps:
1.) Duplicate the level and make the first level invisible.
2.) I use the crop tool to mark the details which I want to have free.
3.) Click on the mask symbole in the level section
4.) At the end I click "auto crop and straighten"
It makes 39 little pics out of one. This isn't what I want to do and it is since the last update.
--> Edit end.
I hope someone understand my problem and can help.
Greetz
Markus from Germany

Since your question asks "Could we ..." I would like to state that "we" cannot do such a thing. "We" here in this forum are Lightroom users, and not Adobe employees. If you'd like to make a request for a specific new feature in Lightroom, there is a link right here on the front page of this forum to the proper place to make feature requests.

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?

HT1222 Every time I try to install an update for iTunes 11.0.2, I get an error message 103. Has anyone else had this problem and found a way to fix this?

Every time I try to install an update for iTunes 11.0.2, I get an error message 103. Has anyone else had this problem and found a way to fix this?

I did it the .dmg way alone and has problems with itunes crashing. This is a better way to ensure that there is not anything left behind to cause issues.
You need to backup your computer then uninstall I-tunes and reinstall itunes.
Delete iTunes
Deleting iTunes is not recommended unless you know what you’re doing.
Launch Terminal from the UTILITIES within Applications
Type the following commands:
cd /Applications/
This brings you into the Applications directory, the next command deletes iTunes itself:
sudo rm -rf iTunes.app/
Enter the Administrator password to confirm
There is no warning or confirmation other than entering the admin password, iTunes will immediately be deleted, effectively uninstalling it from the Mac.
Deleting the iTunes application will NOT delete the ITUNES or music, and any purchases bought through iTunes will still remain tied to the Apple ID used to originally buy them.
You can download the newest version from Apple, and running their installer will bring iTunes back to life on your computer.
http://www.apple.com/itunes/download/

Crop And Straighten Photos - Changing parameters / Editing Script

Hi. I am currently using the Crop and Straighten Photos automation to crop scans of 10 to 12 maps that are scanned on a large flat bed scanner.
A lot of the plans have rough edges and aren't always completely square. Is it possible to allow a tolerance (eg. 5mm, or 20pixels etc) before cropping each image? I've tried editing a .jsx script that was submitted on this forum (the script was designed to crop more border from the image, as opposed to leaving more image) but this simply added a black border around my image as it enlarged the canvas side once the image had already been cropped.
Instead, I need the selection area to be increased prior to cropping.
Does anyone have an idea on whether I can get a script to do what I am looking for?
Furthermore, if two or more of the maps are joined at all by a hair or a frayed string of canvas from the map's backing then the Crop and Straighten Photos automation considers it to be one map and crops it as only one image. Is there a way of increasing this tolerance to make the cropping process more brutal so to speak?
Any help would be greatly appreciated.

Hi Christoph.
I'd realised that once i made the post, and yes, the duplicate and flatten parts in the process are unnecessary, they have been removed. The action is set up now so that once it crops the individual images, it closes the main image down, and then saves and closes the individual images. It is setup to save and close 12 images (as this is the most there will ever be in my case), and I set the action to post errors to a log rather than halt, so if there are less than 12 files it will continue and just post an error in the file. It works really well now thanks!!
I then run an action that options each individual file and brings up the "save as" dialog. This is a chance to perform a QA on the image and to save it as the correct name on the plan.
However, the action is currently setup so that it creates a complete new image each time and closes the original. This is the only way I can make the "Save as" dialog point to the new destination as if I simply open and "save as" the original files, the default folder always resets back to the original folder where the cropped images are. I'll have to investigate other methods of opening and renaming the images to help speed this part of the process up.
Thanks so much for your effecient responses. They have been a great help!
Cheers.

Crop and Straighten not separating photos but is producing a single image file.

I have been trying to use crop and straighten on multiple scanned images and am getting very disappointing results. Instead of separating each of the images with white space around them into individual files, I am getting back a single image of the entire scanned area. Is there a setting I am missing? When I was using CS3 it was no problem, it would have its occasional glitches, but nothing major. CS6 isn't even trying to separate the images.

Could you please post one of the images (or a lores version of it) that produce unsatisfactory results?

Lightroom 4 and 5 my program constantly freezes while using the crop and straighten tool

In both Lightroom 4 and 5 my program constantly freezes while using the crop and straighten tool with horizontal images. Im running Lightroom on a Quad-Core Intel Xeon Mac with 32 GB of memory with OS 10.8.4, this problem has gotten worse and worse to the point where the crop tool is unusable. Please help!

Alright,
no replies so far! Anyways, here's some more information which is leading me to the conclusion that the bug causing the effect described above is a combination of Apple's SMB implementation of Mavericks and the way Lightroom is actually using SMB network access:
I did another trial by connecting a USB hard drive to the USB port of my router (Netgear). The connection is quite slow, but moving one of the folders in question (see my 1st post above) to the shared drive connected to the Router made Lightroom on my Windows machine to see the photos again, when I told Lightroom where to find the moved folder!
Everything was working as expected, on the Windows machine again! Moving the folder back again to the Mac Mini fileshare was causing Lightroom on the PC to get blind again for the pictures trying to sync or import. However, accessing and modifying a photo was possible again, like it was before the trial. So it's only the sync and import function having a problem!
I also did some trial in re-building ACLs and access rights on the file server with no luck. So there's got to be a functionality in sync and import of Lightroom which is using a certain SMB feature which is not supported by Apple's SMB implementation!
Any thoughts or hints?
Thanks!

Crop and straighten

Crop and straighten tool no longer work correctly in PSE 11, windows 7. Problem surfaced in the last week. Have done a complete reinstall and problem still exists. Appers to be an instability error.

Try Edit> Preferences> General> "Reset Preferences on Next Launch" and restart PSE.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks

sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.d11 was not found." I have uninstalled and reinstalled iTunes multiple times. Am running Windows XP Svc Pack 3. help

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753)

Is there a way to adjust crop borders on Crop and Straighten?

I'm trying to use Photoshop CS3 to crop and straighten images of postage stamps. E.g., place a bunch of stamps on the scanner bed and scan them as one image. Then use Automate/Crop and Straighten Photos to create separate workspaces each with a single stamp image, cropped and rotated appropriately. This almost works; the problem is it often crops the stamps too closely, cutting off the perforations. The rotation is not always perfect either. For example, for the above image I get:
These two are pretty good except the perforation tips are trimmed off.
This one is a disaster
So I'm thinking if there were some way to specify how tightly the images are cropped, it might help solve the problem. Any other suggestions?

We now have a solution.
http://forums.adobe.com/thread/778507?tstart=0

Trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails.

CS6 crop and straighten causes error message - "An error has occurred"

Similar Messages

Maybe you are looking for