CS6-Drag clip audio target track issue

CS6 on a mac. Mono audio. Preferences and sequence set for mono. Working with XDCAM EX. When dragging a clip to V2 in the timeline the audio hits A2 and A3 rather than A3 and A4. Even when target tracks are for V2 A3-A4. When usuing overwrite shortcut audio goes to A3-A4 as it should but if I drag the same clip to V2 audio goes to A2 and A3. If I drag the clip to V3 audio goes to A3 and A4.  I don't drag that much but would like to every so often. I'm made the move from FCP so maybe I'm missing something. Any ideas out there?

Dragging will match tracks for video and audio, no way around that.  Only shortcuts allow you to split them.

Similar Messages

  • M-audio fast track issue

    I have just bought a m-audio fast track recording software for garageband to record guitar. It works when I select 'real intrsument', however, it doesn't pick up any sound when I select 'electric guitar'. has anyone else had this problems while using 'm-audio'? what is the best way to deal with this?

    Real Instrument and Electric Guitar are the same the difference is the effects presets. There is no reason it could work with one and dot the other.
    Make sure you selected the interface in garageband preferences and have the correct input channel selected in the track info > input source.

  • Apple TV audio/voice track issues

    We just started using Netflix with AppleTV.  For several programs we can hear the music track, but the audio track is absent.  Dolby setting is "auto", we've done all updates, restarted, no luck...any suggestions?

    Managed to solve this problem myself, it turns out that the files that were causing issues had two audio tracks attached, when the file is loaded i press and hold the middle button to bring up the options, from there press right to the middle tab and change the audio from surround to normal and it plays at normal speed, i have no idea why it was doing this but i can now watch ALL my material finally! hopefully this helps someone else!
    Jim

  • Can't drag clip to preferred track, video 1

    I have 12 clips in my project bin. I have dragged 8 to video 1 successfully, but suddenly, any clips i add now go to Video 3, and attempts to drag them to Video 1 fail.
    This is obviously something very basic i have messed up, but what could i have done.

    Yes, that must be it....the clips that go to video 1 are shot in slow motion, i.e. "super slow" function on my Sony camera..with no audio whatsoever, whereas the other clips are normal motion with 5.1 audio...so thanks, you are on the money !

  • How to drag video & audio clip up one track simultaneously?

    In 6.5, when I dragged a video clip from Video Track 1 to Video Track 2, the audio automatically followed from Audio Track 1 to Audio Track 2. Not so in Pro 3.0 and I assume 4.0. Can this be changed?

    Hi, I am a novice with a similar question.
    I have imported HD ACVHD files into Premiere Pro CS4.
    When I drag & drop the file into Video 1 on my timeline, the audio automatically defaults into the Audio 4 track.
    I want those audio files in Audio 1.
    I have tried to unlink each clip and then group the audio files and drag them to Audio 1, but Premiere will not let me do it.
    A pair of two-part questions about how I can (and should) accomplish the task:
    1. Can I drag & drop the audio files from Audio 4 to Audio 1, and if so, how?
    2. Why does it default like this, and what can I do to change the preset?
    It's kind-of an urgent matter, so I would appreciate any feedback any experienced users can provide me,
    Thanks, D.

  • Manipulating Multiple Audio Clips Within One Track

    Hello I need help with 2 issues!
    Problem 1: I recorded in Audacity converted it and brought them into Soundbooth CS5.  It turns out to be 208 clips that I now have on one track. When I edit/shorten one track (lets say clip 8) I have to individually select all other tracks to move them forward because there's space between clip 8 and 9 thru 200.  How do I select track 9 thru 200 (highlight them all) without having to individually select all clips within the track?
    Your help will grately shorten my editing time.
    Problem 2: I have several clips that have 2 audio tracks by mistake. How do I split up the audio and keep the portion I want?
    Thanks in advance.

    Select "Share" in the File menu, then QT export, expert setting, save as AIFF. (Optionally export just the selected clips)

  • Why can't I drag clips from my source window to my program window on Premiere CS6?

    I am only able to drag clips from my source window to my timeline, but not to my program window. Anyone know what the problem might be?
    Also, the "insert" and "overwrite" buttons are not working from my source window, nor are their shortcuts ("," or "."). I think the problem with the insert and overwrite buttons is related to the reason I can't drag clips from my source window to my program window. Any advice on either problem would be much appreciated, thanks!

    Be sure the appropriate tracks are both targeted and routed.

  • Why would dragging certain audio clips (or cutting said clips) cause program to crash?

    Amateur Doug here!!!
    In CS 5.5, when I highlight and drag some audio clips, the program freezes and won't shut down unless I power off. Ditto when I cut the clips to paste elsewhere.
    I rebooted, same result.
    I made a duplicate sequence same result.
    I tried to cut the clips, same result.
    Any tips would be greatly appreciated, because each experiment requires waiting for computer to reboot so it might be days before I find a workaround...

    I got help for this issue over at CreativeCow's FCP pages -- it turns out, all I had to do was open a new project using an easy setting and project setting for vanilla PAL 25 fps SD stuff. All of the audio was correctly brought in -- then I disconnected all of the clips, made them dual mono, reconnected them, and copied them over to my old gristly project folder.
    Now I can marry these dual mono 25fps files to the video files without having FCP incorrectly compensate for "30fps" by speeding these clips up slightly, so things stay in sync.

  • Real newbie-I can hear my loops in my library, but when I drag them to a track, there is no audio.  What am I doing wrong?

    Real newbie question-I can hear the loops in my library, but when I drag them to a track, there is no audio when I playback or record.  What am I doing wrong?

    You probably put Midi loops (green) on audio tracks, and audio loops (blue) on Midi tracks.
    That won´t play.
    JanD

  • Dragging clips to bins is very slow in Premiere CS6

    I just upgraded to Premiere CS6 from CS 5.5 (no thank you, CC) and have problems with very slow speed when dragging clips from one bin to another in the Project panel. Here are the specifics:
    I have about 1500 clips in a bin that I'm sorting through in the Project panel, putting clips into other bins as I classify them. If I have the 1500 clips sorted by the Name field, there's no delay as I move a clip or clips from the big bin to one of the smaller bins. If, however, I sort the 1500 clips by Media File Path in the Project panel (which puts the clips in chronological order because the file names reflect date and time), then doing the same work results in an 8-second delay every time I try to move a clip between bins.
    I get the 8-second delay each and every time I drag a clip between bins. It occurs whether I select a single clip to drag or drag multiple clips. As soon as I sort in the panel by Name field instead of the Media File Path field, dragging has no delay.
    I have no such trouble with delays in CS5.5, so I'm at a loss. I need to have the bin sorted by Media File Path, because I need them in chronological order as I evaluate them. But an 8-second delay each time I move a clip bogs me down so much it's impractical to get any sorting done.
    I suspect this is a bug. I've upgraded to CS6.05, but that didn't fix it. Does anyone have a workaround?
    Thanks,
    Mike Boom

    A good suggestion. I did try that earlier, but alas, no luck.
    Sorting works across all bins in the Project panel, so once you sort on the Media File Path, drags are slow from all bins, even if you segment into bins as small as two clips.
    Premiere is doing something bad with sorts after CS5.5. Looks like Adobe fell down on regression testing for the updated version. Then again, it's got to be hard to regression test as many features as Premiere has.

  • Drag & drop audio clip from timeline to project window ?

    i no longer can drag a clip from timeline to the project window & then breakout the clip to mono by selecting clip - audio options- breakout to mono - now when i drop an audio clip from timeline into the project window it does not show up anywhere in the project window - did an update get rid of this function ? it was much better than having to go back to the unedited original source & start from scratch ...

    thanx for your time Jim - i understand that would be the preferred method but that was a quick fix until recently i have noticed that i can no longer do it by just grabbing the edited clip & drop it in project window so that i can modify just that portion of the original files properties - it still functions that way on a friends machine - was just kinda weird that i can't get it to work that way any more …

  • Merging clips results in several duplicate audio channels/tracks

    I am trying to sync my audio and video in Premiere, and something is screwing it up.
    I have my video track, that has 2 audio tracks.
    Then I have my polyphonic wav file, that has 5 audio tracks.
    2+5 = 7, right?
    So why is it, when I merge my two clips together, that Premiere decides to create 20 additional tracks for my Merged Clip, totaling 27 tracks?! The majority of them are blank/empty/silent. Why is it doing this?
    ORIGINAL FILES SYNCED UP
    AFTER - MERGED CLIP ON RIGHT

    jdemo177 wrote:
    . I used pluraleyes to match the audio, 5D and HVX and then imported a multi cam storyline.
    I don't understand this part of your explanation. It's been a while since I've used PE, since FCPX's sync and multicam features work so well.
    Why not try a short test – skipping the PE steps entirely. Select two of your clips and let FCP automatically create a test multiclip matching the HVX waveforms with those on the 5D. Open in the Angle Editor – or start a test project and see whether the boom mic track is present.
    Russ

  • Unable to drag clip onto timeline...only audio appears...sound familiar to anyone?

    Using Premiere CC...today something is preventing me from dragging clips onto the timeline..only audio shows up...what could be the cause? Anyone ever had and risolved a problem like this?

    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

  • M-Audio Fast Track Pro to CS6?? having some major rookie problems.

    AT2020 mic plugged into mic1 on Fast Track Pro.  Fast Track Pro USB connect to Windows 7 computer.  In CS6.. under "Audio Channel Mapping"... Default Stereo input is M-Audio USB ASIO... Output is M-Audio USB ASIO.  Under "Audio Hardware"... Device Class is ASIO and the Device is M-Audio USB ASIO  (there is a box next to "Release ASIO driver in background) that is NOT checked.
    I *believe* I have everything hooked up correctly. 
    BUT.... THEN WHY ON GOD'S GREEN EARTH CAN'T I RECORD OR HEAR ANYTHING.
    I've got a mic signal on my Fast Track Pro, but NO levels in CS6...
    Not to mention anything in my headphones.
    I know this question has been asked 1000 times, but...
    if you're kind enough to walk me through this, I'll send you a Starbucks card, a Subway card,    ....some sort of gift card worth $10. 
    Seriously.
    Thanks in advance

    You've got a couple of options.
    Frankly, the best will be to use the direct hardware monitoring feature on your Fast Track Pro.  There's a monitor knob on the front of your interface--turned hard left, you'll be monitoring your input; as you turn clockwise, you'll be mixing in any background stuff coming from Audition (music beds, etc.).  You may need to make some adjustments in the control software that came with the Fast Track Pro but, set up as you are, it'll probably be okay as is.
    The second option will be to monitor via Audition.  To do this, make your recordings in Multitrack mode (there are good reasons to do this anyway, not least the writing direct to files rather than a temp folder that has to be saved later or lost forever).  In Multitrack, in the control panel at the left hand end of every track there are a series of buttons:  M S R I.  The "I" button stands for input and routes the input to that track to the output for monitoring.
    The reason I suggest using the hardware monitoring in the Fast Track is that there'll be some latency in the round trip via your interface then computer.  Whether this latency is enough to be disturbing will depend on your system and other settings...but it doesn't take much latency to make voice recording difficult.
    Hope this helps

  • Audio Track Issue

    Hi All,
    I have my audio track playing on 1, and I want to play another audio on track 2 but my track 2 is controlling from track 1, also the same issue 3 and 4. anyone know how to fix?

    Logic can either be in "Universal Track Mode" or not. If I'm remembering which is which, you are not.
    In Universal Track Mode, any track can be mono or stereo. You switch it by clicking on a little circle (or double circle) on the lower left of the audio object fader.
    In the normal mode (which I prefer but I always have trouble remembering why), to record or play stereo audio tracks you must click that circle on an ODD numbered track. Then it will "enslave" the next higher number even numbered track. You put you stereo track on the odd numbered track and ignore the even numbered track.
    So: If you are trying to play 2 interleaved stereo recordings, put one on track 1 and the other on track 3 -- they are already set up for stereo.
    If you are using mono recordings, click the double circle on track 1 and it will free track 2. put one mono recording on track 1 and the other on track 2.
    Hope that made sense.

Maybe you are looking for