CS6 Drop shadow will not blur.

I did the update it worked twice this morning and bam no blur on the drop shadow. I shut down completly and rebooted still not working. Any suggestions?

That is basically what I am doing it will work a few times and all of a sudden it stops again. Delete prefs and it works again. You can see when it stops that the gaussian blur is not being applied.

Similar Messages

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

Photoshop CS6 Trial Version will not open on my Mac

Photoshop CS6 Trial Version will not open on my MacBook Pro 10.6.8. Message: Photoshop CS6 will not open on this type of Mac. Dreamweaver opened without a problem. When I go into my Adobe Application Manager, it shows Photoshop and Dreamweaver as installed even though I had to unistall Photoshop. I was hoping to try the download again??
Please help.

Creative Suite Cleaner Tool
Run it, try again.
Mylenium

Drop box will not accept books anymore

Drop box will not accept books put in my computer and dragged to its Dropbox. Up until now it worked fine.

Moving discussion to Acrobat Installation & Update Issues forum.

Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
Thank you.

Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
Thanks again.
John

I,ve got a retail box CS6 design, it will not auto run or start set-upexe, help.

I,ve got a retail box CS6 design, it will not auto run or start set-upexe, help.

are you using a window's system? if yes, which version?
and, attach a screenshot of your disc's contents.

Drop shadow failing to blur with high document raster effects settings DPI

I have a 1024px square artboard (in Illustrator CS6 16.1.0 running on Mountain Lion 10.8.1) with some fairly simply artwork that has a drop shadow effect applied, shown here at 33% with the Document Raster Effects Settings (DRES) resolution set to 150 DPI:
If I change the DRES resolution to 300 DPI, the blur on the drop shadow disappears entirely:
If I leave the DRES resolution at 300 DPI, but resize the image to make it a little smaller, the blur on the drop shadow comes back:
I’ve wasted several hours already trying to get the desired blurry drop-shadow on the full sized image with the DRES resolution at 300 DPI, to no avail. Does anyone have any idea as to what is going on here, and what I can do to solve this problem?
Many thanks in advance.

The Gaussian Blur was rewritten for CS6 and should probably be similar in CC. Your screen shots did not get properly attached. Can you try again to attach them using the Camera icon in the reply window tool bar?

Photoshop CS6 - Batch function will not save files

OK, I have used the "Automate/Batch" function well over a hundred times, so this situation (first time using it in CS6) is VERY frustrating!
Running Adobe CS6 extended v. 13.0.1 x32 on a Win XP sp3 OS.
I have a slew of photos that need nothing done except to resize from the native file size to 6 in x 4 in @ 150 ppi and save into a new folder (to not override the original). I have recorded the action multiple times now and each time I run the action, the files do not save! Here are the various parameters I've used:
Attempt #1:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
      Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
NO checkmarks next to any options
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #1 - DID NOT SAVE FILES
Attempt #2:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
     Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Cehckmark override Action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #2 - DID NOT SAVE FILES
Attempt #3:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
      Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
Checkmark override action "Save As" commands
Did not change file naming parameters
Result #3- DID NOT SAVE FILES
Attempt #4:
     Action Steps Recorded -
Open
Image Size (set parameters here)
Save as (set folder location here)
Close
     Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override Action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #4- DID NOT SAVE FILES
Attempt #5:
     Action Steps Recorded -
Open
Image Size (set parameters here)
Save as (set folder location here)
Close
       Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
Checkmark override action "Save As" commands
Did not change file naming parameters
Result #5- DID NOT SAVE FILES
Please help! This has never been a problem before CS6 and I truly am at my wits end trying to figure out why the files will not save. I have several hundred files that I need to run this on, so doing it individually is not an option.
Thanks in advance for any and all insights!

I'm having a problem with Automating > Batch as well. Strange enough, I did a batch of other photos and it worked fine. Selecting a new set of folders is not working at all; the files simply pop open and then close but the destination folder remains empty. It also doesn't appear the actions are occuring since I don't see them highlighting as the automation runs. I have no idea why it would work then not. BTW, "Override Action "Save As" is unchecked.
~CG
UPDATE: I put a "save as" command at the beginning of the action, then checked the "Override Action "Save As" box and it somehow works now, but not before stalling on an image (normally the last in the folder) and complaining that the image was being used in another program. The only other program opened was Bridge so I'm unsure why it had a problem. I closed both programs and ran the automation with nothing else opened and it worked ... ?? Confused, but not complaining (for now).

Help please. CS6 exchange panel will not load.

Hi,
I have Photoshop CS6 extended and for some reason my adobe exchange panel will not load. This only happened earlier today. I have been designing all week and never had a problem before this. I cannot load any of the panels in Photoshop. I have done everything possible and trust me I worked on a solution for over 5.5 hours searching reading, uninstalling re installing etc and no solution. I just keep getting this error message "Cannot complete command because the extension could not be loaded".
The version of Extension Manager is 6.0.7.6. I came back to edit this as I should have mentioned that I did disable my anti virus.
I would really appreciate any advice please.
Thank you in advance
Rosa
I have since discovered that the problem was the software onOne Perfect Photo Suite 8 which I had installed earlier today - so have contacted onOne for support. I ended up un-installing the program and Photoshop has returned back to normal.

Obviously my problem was with the onOne new Suite 8 plugin. I had Suite 7.5 as well as PhotoFrame 4.6 Professional Edition and Photo Tools installed, so after trying a few different things my last option which worked was as onOne suggested and that was removing the onOne panel completely from CS6 and re installing Suite 8 ticking the 3rd option in the installation process - leaving PhotoFrame and Photo Tools installed. I do have many panels in CS6 and to my delight after the installation of Suite 8, all the panels in my CS6 were operational and ready to go!
Obviously there was a clash with the Suite 7.5 and 8. Removing Suite 7 worked for me. Initially onOne advised not to uninstall the previous version and just tick the first option to keep both versions. Obviously there was a clash between the version panels.
Hope this helps.

Iv just installed cs6 and it will not open raw files from canon 5d111?

iv just installed cs6 it will not open cr2 files from my canon 5d111 ?

update your adobe camera raw files.
windows: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
mac: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

CS6 upgrade suddenly will not load, telling me it is a trial version of CS6 Ext and I must register.

I upgraded from CS5 to CS6 for my IMac. I downloaded CS6 put in my serial number and it worked fine for a number of weeks. Suddenly, when I went to use it it said it was a trial version. I had to register it to use my CS6 I registered it and it worked, but only as a trial version of CS6 Extended. I do not want CS6 Extended. I deleted it from my hard drive and once again downloaded my upgrade of CS6 again with my serial number and it worked fine for a couple of weeks. Today, once again, it tells me it is a trial version and will not load unless I register the trial version. What the heck is going on? This is crazy. I simply want to use CS6, for which I paid. Help!
Frank Brault

There is a lot of this going around. Adobe is aware of problem and hope to get a fix soon. http://forums.adobe.com/thread/1114727?tstart=0

Change distance and size of drop shadow does not allow me to use the arrow up/down, or any of the effects windows.

Does anyone know why I'm not able to use the up/down arrow shown above. This has only happened recently.

You have two different blending modes on your layer that are neutralizing each other.
You probably have your text on a separate layer.
In the the Effects PANEL (NOT the dialog box) you have the blending mode set to SCREEN.
In the Effects DIALOG box you have drop shadow with the default MULTIPLY blending mode.
See the setting in the lower left of the dialog box.
Object is set to Screen 100% ( in the Effects PANEL)
But the Drop Shadow is set to MULTIPLY in Effects DIALOG box
These settings are canceling out each other.

HavI e downloaded my InDesign CS6 , but files will not extract. How can I fix this?

I have downloaded my InDesign CS6 Suite , but files will not extract. How do I Solve this?

We cannot know. You're being to vague and not offering any detailed info about your system and so on.
Mylenium

When I click on a tab or link on a website it will not open, or the 'drop-down' will not appear.

When I click on something on a web page it will not work. Example: Toyota.com vehicle tab

Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Drop shadow is not exported in pdf when used in a symbol

When I apply the effect "drop shadow" on an object and export to pdf it works fine. When I then convert the object into a symbol and export to pdf, the effect is gone.
Suggestiones other than "don't use symbols" ???

No, I can't reproduce the Preview issue.
Maybe it is caused by other options in your file.
Anyway: Preview is in no way suitable to pre check files for printing.

CS6 Drop shadow will not blur.

Similar Messages

Maybe you are looking for