CS6: error in displaying the selecting outline

Hi,
in Photoshop CS6 I opened about 90 (yes, ninty ) images at once and now I want to create selections image by image (and in the next step cropping to these selections, saving & closing the images automatically by using a script). But when I make a selection and move it afterwards to a new position or create a new one, the selection borders/outline look/s like this - very ugly:
Maybe because there are too much images opened? (but not the first time I use this "method" for editing several hundreds of images).
In the status bar PS shows me 12,1 GB for the images, but "only" has 10,5 GB RAM available (identical to the PS settings).
Or is this primary a problem of my graphics card which only has 512 MB RAM (in a workstation with 16 GB RAM)?
... or "just a bug" in CS6?
thanks!
mtemp

I've never seen this before, but yes, it may be a graphics card limitation.
As a test, what happens if you make a channel out of that strange broken selection? It it really as messed up as it seems to be?
The other alternative could be that since PS is being asked to use more RAM than is available, it is going to disk. This could also mean a hard drive corruption of some kind.
What happens if you only open half the images? Do the selections work properly then?

Similar Messages

Error message at the selection screen while processing screen logic

Hi All,
I need to show error message at the selection screen.
I am calling the screen inside the START-OF-SELECTION, and processing the calculation and putting the data into i_final internal table. If internal table I_FINAL is empty I have to show error message saying ' DATA is empty' , this error message should be shown at the SELECTION SCREEN (Report input screen 1000) and provide the user to enter the input values once again.
But whenever I am populating error message, I am getting a pop up to chose exit, and process is terminating.
Since I am in the middle of the screen processing whenever I am giving a error message.
Please let me know how can I populate error message without terminating the process while I was in the middle of the screen processing logic.
Regards,
Mahesh

hi
If u are trying to validate a field use
AT SELECTION_SCREEN ON <field>
if want to validate a block
AT SELECTION SCREEN ON <block>
If Universal Validation
AT SELECTION SCREEN
and display a 'E' Message inside the block.
You can Enter Correct Value and start processing Forward.
hope this will help.
Regards
Sumit Agarwal

Error in displaying the address in the address bar of jsf program

Hello,
I develop a simple application with 3 jsf pages, one is the main.jsp, the other two are article.jsp and proposal.jsp. I also create 4 jsf navigation case in the faces-config.xml which contain the following situation:
article.jsp -gomain1> main.jsp
main.jsp -goArticle> article.jsp
main.jsp -goproposal> proposal.jsp
proposal.jsp -gomain2> main.jsp
I create two commandbuttons in the main.jsp and the actions are goArticle, goProposal respectively.
I create one commandbuttons in the article.jsp and the actions is gomain1.
I create one commandbuttons in the proposal.jsp and the actions is gomain2.
When I run the program, everything works fine. But I found out that there is something error in displaying the links in the address bar:
1. main page, http://localhost:8988/po-view-context-root/faces/main.jsp ok.
2. click article, http://localhost:8988/po-view-context-root/faces/main.jsp;jsessionid=c0a87f6e231cc8717caa21484ec38fecb60f8f50a7d2 ok.
3. click return, http://localhost:8988/po-view-context-root/faces/article.jsp (ERROR: should be main.jsp but the content is main.jsp?)
4. click proposal, http://192.168.127.110:8988/po-view-context-root/faces/main.jsp (ERROR: should be proposal.jsp but the content is proposal.jsp?)
5. click return, http://localhost:8988/po-view-context-root/faces/proposal.jsp (ERROR: should be main.jsp but the content is main.jsp)
It seems to me that the address bar displaying the wrong address but the content is correct, it quite annoying me, do i do something wrong or is it a bug in 10.1.3?
Regards,
Alan 22/11/2005

Hi Huseyin,
verify if you have defined the column name "link_name" on your "sql" parameter. It should be something like:
select geometry, link_name from your_table
Joao

To display the selection screen variant name in WAD report output.

Hello experts,
I have a requirement which is to display the selection screen variant description in the output of the WAD report.
I managed halfway, by using the object "Information field", which displays all the values which are selected by the variant.
Example:I have created a cost center report created using WAD, since I need some graphical displays..
In the selection screen, I have the characteristic "cost center" as input field. I have created a variant " GM - IT" which will include few cost centers managed by GM. In the output, I want the dispaly to be "Cost center - GM IT". Currently it displays "Cost Center - a,b,c,d" as the values a,b,c,d are the values from the variant name "GM-IT"
Please let me know if this required any java script. I am not familiar with java / html codes and any help would be much appreciated (and rewarded)
Thanks in advance
KS

Hi,
Try this.
If you want to include your variables in your WAD means you have to choose "Force Variable Screen" option to be in enabled condition.
TO enable this,in WAD select your Template(New Template1) click the WEBITEM , it'll shows all generic properties , here you can enable this "Force variable screen"
Save and execute your WAD now you can get your variable screen.
Thanks,
JituK

Keep getting error: None of the selected updates could be installed. An unexpected error occurred. Please help!

Hey I am kind of new to this forum situation, but I keep trying to install software updates on my macbook for the last two weeks and the aforementioned error (None of the selected updates could be installed. An unexpected error occurred.) keeps resulting. I would download them straight from online, but I don't know which ones to download. What should I do?

Bring up Software Update, and when it says it has updated software to download, click the button on the left bottom of the window, might say something like show details. That will open the box to show you exactly what would download. You can then visit the Apple download site at http://support.apple.com/downloads/

Is there a function module to display the selection options

Hi all,
How can I display the selection options (F2) popup, like the one in the data browser (SE11) selection screen? I have a custom report. Instead of right clicking on the selecion-options field, user want a button to click so the selection options popup appear on the screen. Is there a FM that I can use?
Thanks in advance.

Hello,
i have tried debugging the standard code.... and i could find the below code which is triggering the F2 functionality for a field.
CALL METHOD call_method
    EXPORTING
        method = 'SetButtonState'
        p_count = 3
        p1 = fcode
        p2 = m_enabled
        p3 = m_checked
    EXCEPTIONS
        OTHERS    = 1.
IF sy-subrc NE 0.
   RAISE cntl_error.
ENDIF.
class - CL_GUI_toolbar
method - Set_button_state.
You may try this.
Regards,
Venkatesh

How to display the selection screen fields for selected checkboxes

Hi all,
         I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.

hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
             p_chk2 as checkbox user-command PQR,
             p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
                 s_ersda for mara-ersda modif id A,
                 s_werks for marc-werks modif id B,
                 s_lvorm for marc-lvorm modif id B,
                 s_tab for dd03l-tabname modif id C.
data: v_chk1,
      v_chk2,
      v_chk3.
at selection-screen output.
loop at screen.
    if screen-group1 = 'A' or
       screen-group1 = 'B' or
       screen-group1 = 'C'.
        screen-input = 0.
       modify screen.
    endif.
endloop.
loop at screen.
    if v_chk1 = 'X'.
      if screen-group1 = 'A'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk2 = 'X'.
      if screen-group1 = 'B'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk3 = 'X'.
      if screen-group1 = 'C'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
    if v_chk1 = ' '.
      v_chk1 = 'X'.
    else.
      v_chk1 = ' '.
    endif.
endif.
if sy-ucomm = 'PQR'.
    if v_chk2 = ' '.
      v_chk2 = 'X'.
    else.
      v_chk2 = ' '.
    endif.
endif.
if sy-ucomm = 'XYZ'.
    if v_chk3 = ' '.
      v_chk3 = 'X'.
    else.
      v_chk3 = ' '.
    endif.
endif.
Regards,
Sailaja.

How to display the selection screen with icons as well as with text element

How to display the selection screen with icons as well as with texts (written in text elements) for PlantDate, OrderType,WareHouse..

Report zex33.
type-pools: icon.
selection-screen begin of line.
selection-screen comment 1(20) text_001.
parameters: p_werks type marc-werks.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_002.
parameters: p_whouse(10).
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_003.
parameters: p_auart like vbak-auart.
selection-screen end of line.
initialization.
write ICON_PLANT as icon to text_001.
concatenate text_001 text-001 into text_001 separated by space.
write ICON_WAREHOUSE as icon to text_002.
concatenate text_002 text-002 into text_002 separated by space.
write ICON_ORDER as icon to text_003.
concatenate text_003 text-003 into text_003 separated by space.

'Error when generating the selection screen "0500"

Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
Sachin

Hi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini

Error when generating the selection screen '0005'of report 'XYZ'

Hi All,
We copied std SAP pgm and were trying to rename the one of the screen but couldnt. When I tried to transport it to test system it went in to dump giving the error Error when generating the selection screen '0005'of report 'XYZ' .
Please advise me on how to remove this dump.
Regards
Saurabh

If you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
Rob

Select list: Display the selected value using JSP

Hi
I have a select list with a set of values and when I select a value from the list I want the selected text to appear on the screeen. How do I display the selected value?
Please help:
Here is the code for the list:
<select name="arraySelect" size="8" onclick="">
<%for (int i = 0; i < dumpArray.length; i++) {
if( i == 3){
%>
<option value="<%=dumpArray%>" selected><%=dumpArray[i]%></option>
<% i++;} else %>
<option value="<%=i%>"><%=dumpArray[i]%></option><p>
<% } %>
</select>
<% String name;
name = request.getParameter("arraySelect");
out.println(name);
I tried request parameter but it did not help. How can I do it?

did you submit your page?

ABAP Run time error when display the Customs Export declarations

Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar                              type      /sapsll/corpar_t
lt_corpar_ht      type      /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
     "/SAPSLL/CUHD_LOAD_SELECTION".
    The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
    In the source code you have the termination point in line 144
    of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep Maddi

Hi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors         ITAB_DUPLICATE_KEY
ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep

Error when Generating the Selection Screen?

Hi Guys,
               When i am executing the program with this code .I am getting this type of Error
" Source code   ZUSFICOR00013_MM_ACNT_COSTING                Line     0
Error when generating the selection screen "1000" of report
             I got this Error while activating my program.The code which i wrote is the below one.
SELECTION-SCREEN: BEGIN OF LINE.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN COMMENT 2(10) TEXT-004 for field s_matnr.
SELECTION-SCREEN: END OF LINE.
Thanks,
Gopi.

Hi Seshu,
              While doing EPC for the Below code
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(15) TEXT-004 for field s_matnr.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN: END OF LINE.
              I am getting an Warning like " Selection text or parameter for selection field S_MATNR is not maintained" How to coorect this one?
               and also for the this Below Code
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'BWKEY'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Plant'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'MAKTX'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material Description'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
                 I am getting EPC Error like " Char. strings w/o text elements will not be translated:
'Plant'"
     Can u please tell me How to correct these type of EPC Error's.
Thanks,
Gopi.

Latest update returns error " None of the selected updates could be installed. The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."

Latest update returns error " None of the selected updates could be installed. The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."

Which latest update? Details get answers. Rather than using SU, DL and install from http://support.apple.com/downloads/.

Displaying the selected multiple records from node using onleadselect event

Hi all,
How to display the selected multiple records from node to node using onleadselect event.
i came to know tht to fulfill this requirement i need to use the method get_selected_elements,
how to use this method in my event??
sree

Hi Sree,
Try below code..
DATA : lo_nd_it_lips TYPE REF TO if_wd_context_node,             // This is first node
             lo_el_it_lips TYPE REF TO if_wd_context_element,
             ls_it_lips TYPE wd_this->Element_it_lips,
             lt_it_lips TYPE wd_this->Elements_it_lips.
           DATA: wa_temp TYPE REF TO if_wd_context_element,
            lt_temp TYPE wdr_context_element_set.
* navigate from <CONTEXT> to <IT_LIPS> via lead selection
      lo_nd_it_lips = wd_context->path_get_node( path = `ZRETURN_DEL_CHANGE.CHANGING_3.IT_LIPS` ).
      CALL METHOD lo_nd_it_lips->get_selected_elements
        EXPORTING
            INCLUDING_LEAD_SELECTION = ABAP_true
        RECEIVING
          set = lt_temp.
      DATA lo_nd_pack_mat TYPE REF TO if_wd_context_node.          //Second Node
      DATA lo_el_pack_mat TYPE REF TO if_wd_context_element.
      DATA ls_pack_mat TYPE wd_this->Element_pack_mat.
      DATA lt_pack_mat TYPE wd_this->Elements_pack_mat.
* navigate from <CONTEXT> to <PACK_MAT> via lead selection
      lo_nd_pack_mat = wd_context->get_child_node( name = wd_this->wdctx_pack_mat ).
      lo_nd_pack_mat->get_static_attributes_table( importing table = lt_pack_mat ).
      LOOP AT lt_temp INTO wa_temp.
        CALL METHOD wa_temp->get_static_attributes
          IMPORTING
            static_attributes = ls_it_lips.
              ls_pack_mat-vbeln = ls_it_lips-vbeln.
              ls_pack_mat-material = ls_it_lips-matnr.
              ls_pack_mat-vgbel = ls_it_lips-vgbel.
                append ls_it_lips to lt_unpack.
              CLEAR ls_pack_mat.
       ENDLOOP.
Cheers,
Kris.

CS6: error in displaying the selecting outline

Similar Messages

Maybe you are looking for