CS6 Fluid Grids Can you use a sliced images?

I sliced to pictures and was hoping that I could some how figure a way to make it work with fluid grids but no luck.
I tried slicing it both ways but I guess it will always fall apart: http://www.lavishvegas.com/las_vegas_barsx.html
Thaks for any help!

DWQuest wrote:
I sliced to pictures and was hoping that I could some how figure a way to make it work with fluid grids but no luck.
I tried slicing it both ways but I guess
What does "make it work with fluid grid" means?    What exactly are you trying to do and how much do you know about HTML and CSS?
To make things work as you want it requires working with the code and so some knowledge is required.
Good luck.

Similar Messages

  • Crop, can you use for multiple images?

    If you are doing copy work, is there a way to save a crop and use it on multiple images as you might drag an adjusment layer to other images? thanks.

    kevin4545 wrote:
    this is best done in ACR?
    That's what I was going to suggest, actually. If you're working with a file format ACR can take (raw, DNG, JPEG, TIFF), ACR will definitely be the fastest way. You can select them all in ACR, apply a crop, and they all get it.
    Or you can crop one image in ACR, exit ACR and select the image in Bridge, and choose Edit > Develop Settings > Copy Camera Raw Settings. Then select any other images you want to crop the same way, choose Edit > Develop Settings > Paste Camera Raw Settings, and select only Crop as the setting to paste.
    Either way, you'll be done in 30 seconds, much faster than it would take in Photoshop.

  • Can you use educational version of either CS5 or CS6 for freelance work on your private computer

    Can you use educational version of either CS5 or CS6 for freelance work on your private computer

    Yes/ no/ perhaps. Depends on the specific S&T regulations. They're different for each country.
    Mylenium

  • Centering a page in Dreamweaver CS6 Fluid grid

    Centering a page in Dreamweaver CS6 Fluid grid.
    I figured this would be an easy task and have saved it to last. After watching videos, scanning the web and this forum I have found many answers but none of them seem to work in CS6. I currently have an extra 1-2% margin on the left to get the page closer to the middle but this doesn't work well with all screen sizes and its still not in the middle.
    Page can be found here
    Any advice would be greatly appreciated!

    It looks like you've nested the rest of content within your #header DIV. And header div's width is 94.4% - this results in everything on the site have a ~5% margin on right.
    You may want to fix this first to see if it helps you with the result you intend to get. If not, do post back.

  • Dreamweaver CS6 fluid grid with slideshow

    I am trying to create a slideshow page for my DW CS6 fluid grid site, preferably with previews.
    I want the images to scale with the width of the browser.
    I checked out different plugin's and apps but one does not integrate with DW, the other can't combine Landscape and Portrait pictures ect....
    After looking in the forums I could only find 1 discussion about this resulting in there is no solution.
    But a year has past and...... does anyone know a good solution?
    Don't want to use Flash.
    thx.

    "Try and find a "Responsive jQuery Slideshow" plugin? The biggest issue
    that javascript-slideshows will have is that many rely on having a
    specific width"
    Non-jQuery extensions sometimes present solutions:
    http://www.projectseven.com/products/galleries/igm2/examples/demo-01.htm
    Al Sparber - PVII
    http://www.projectseven.com
    The Finest Dreamweaver Menus | Galleries | Widgets
    Since 1998

  • Can you use the same Apple ID on more than one MacBook Pro for updates and applications?

    We just got a few new MacBook Pro's and when I went to install updates it said I need to make an Apple ID.  Can you use the same Apple ID and email address for that Apple ID on multiple machines, or do I need them both to be unique per machine?  I'm not sure how that works when you have multiple machines.

    An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services.   So you can use the same Apple ID for up to 10 Macs associated with it.
    To create an Apple ID you need to enter  your full name and your primary email address as your Apple ID. This will be used as the contact email address for your account.

  • How many Ipods can you use with one Itunes account?

    How many iPods can you use/sync with one iTunes account?

    PT wrote:
    Macistotle wrote:
    Unless you have DRM still haunting your tunes ... Then you can only use those songs on 5 devices. Otherwise, connect as many as you like (as stated above).
    No, you can sync your DRM tracks to an unlimited number of iPods (but only authorized to play on 5 different computers/user accounts)
    Patrick
    So I can sync two iPods to my iTunes account and sync the same digital copy movies that come with some o' my DVDs to both ipods? Do movies make a difference really, DRM-Wise? Thanks in advance.

  • Can you use a iTunes card to purchase more storage for iCloud

    can you use a itunes card to purchase more storage for icloud

    No. iTunes Store only.
    "An iTunes Gift Card lets you shop for anything at the iTunes Store "  >  http://store.apple.com/us/browse/home/giftcards/itunes/gallery

  • Can you use soundtrack pro's loops in your youtube videos or do you need to purchase a license since it is royalty free?

    Can you use soundtrack pro's loops in your youtube videos or do you need to purchase a license since it is royalty free?
    I understand they are royalty free, I am just confused about using the actual loops for films, videos, etc - if there is a special license you must purchase or what?
    Yes sure, it's a library and may be used a lot - but is it legal or against agreement?
    And to clarify - what about music I create on the program , that is ok right?

    If you purchased the software you have the right to use the loops that came with the software in the software to make whatever you want.

  • Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

    Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
    I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

    I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
    I want to simultaniously provide a Wifi connection and a LAN connection at the same time
    Thanks,
    BRad

  • HT204053 Can you use the same Apple ID for two devices ?

    I have an MacPro and I am buying an iPad.  Can you use the same Apple ID for two devices or should I create an new AppleID for the ipad?

    Welcome to Apple Support Communities
    The Apple ID purpose is to have the same data in all your devices and share your purchases among all your devices, so you can use your Apple ID in both devices

  • Can you use FaceTime using two iPads with same apple id

    Have two iPads for wife and I. Both use same apple ID account. Can you use FaceTime between them?

    Heres what you do. got to settings>facetime>add an email and than add another email (note: cannot be the same email that you use on your apple ID) A verifaction email will be sent. Go to your email account and verify the email by clicking on the link. Now using the other ipad, make a facetime call to the email you just verified and you can now facetime between the two!
    One more side note. Make sure that only the email you just verified has a check mark on it. The other ipad shoud have a check mark next to the orginal apple ID email.

  • Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?

    Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
    I have 2 and cannot seem to get them to work?

    Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
    I have 2 and cannot seem to get them to work?

  • How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
    Look at this very informative video for the instructions.
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • Can you use one PC for 2 different Ipods, with out erasing the others music from Itunes?

    Can you use one PC for different Ipod touch's , with out erasing the other persons Itunes music?

    Yes.  See:
    How to use multiple iPods, iPads, or iPhones with one computer

Maybe you are looking for

  • How can I get the server absolute path of virtual directory?

    Problem context: absolute path of my application at JRUN server is c:\testing nd url is http://kaspak/test ( kaspak is a machine local to server i-e client nd server r at same machine ) I m uploading a file nd saving it at server. PROBLEM: server sav

  • How to delete saved report S_ALR_87012078

    Hi, Good day! We would like to request your advice on the following: Whenever we generate report S_ALR_87012078/0SAPDUEAN-01 (Due date analysis for open items), we save it  and it is automatically shown onscreen whenever we access the report. However

  • Daylight Savings Time and Alarmsk

    Since the daylight savings time updated over the weekend the alarms I had programmed on my iPhone will not set properly. The phone displays the correct current time so I know the clock has updated but any alarms I have set for the hour of 2am - 3am d

  • FM  "COM_PRCAT_CREATE_API_INT"  gives  dump

    Hi all, I am trying to use the foll FM  "COM_PRCAT_CREATE_API_INT" in a report but getting an exception: Function module "COM_PRCAT_CREATE_API_INT" was called with the parameter "IV_HIEARCHY_EXIST_IN_PME". This parameter is not defined. When i run th

  • Plant Code in ORDERS04 IDoc

    Hi All, Is there a field for Plant in ORDERS04 IDoc? I couldn't find it..plz help me to confirm my finding? Or, can the fields QUALF/ORGID of Segment E1EDK14 be used for this? OR, I can extend the IDoc and have the field for Plant, WERKS--right? Fast