CS6 Freezes during startup at Measuring Memory

I am new to this forum, so not sure where to post this.
When I click on the icon to start Photoshop CS6, it freezes at "Measuring Memory". 
I tried to uninstall Photoshop but the uninstall will not work.  I tried to reinstall with the disk but Windows will not start the setup file.
I also ran scans on viruses and it turned up negative. 
Does Photoshop have a repair program?
From the PC properties:
Windows 8.1
Toshiba
Satellite P55T-A
64-Bit Operating system
Best,
Michael

Turn off whatever obscure security tools you use. All your issues point to a little overly aggressive zealot that does more damage than good in that department.
Mylenium

Similar Messages

  • Freeze during startup after SW update from 10.4 - 10.4.8

    After updating to 10.4.8, my machine would freeze during startup (at the gray screen with the apple and spinner) and give me the "Please restart your computer" message in a few languages.
    I thought it might be a RAM issue, so I removed all third party RAM - same problem.
    I replaced all of the RAM with RAM from another G5 that I know worked - same problem
    I moved the HD from my G5 to another G5 that was working - same problem (I believe that eliminates the motherboard and any other components from being the problem).
    I thought that the HD might be bad, so I replaced it with a brand new SATA drive, installed 10.4 and it worked perfectly, ran all of the SW updates (including the combined 10.4.8 update) and I get the same freezing again when I reboot.
    Any suggestions are appriciated!

    Hi Joe,
    Welcome to the only place where you can get friendly advice.
    Ok have you tried starting up from the installer / restore CD that came with the mac and run disk utility??
    Try hardware test doing the extended test in a loop to try and find the base of the Kernel panic (thats what the "you need to restart your computer" image indicates)
    For info and guidance on Kernel panics see:
    http://docs.info.apple.com/article.html?artnum=106227
    and trouble shooting info:
    http://docs.info.apple.com/article.html?artnum=25392
    for extensive advice on solving the kernel panics see:
    http://www.thexlab.com/faqs/kernelpanics.html
    Worst case senario it could be the G5 processors, make sure you have applecare; just in case it gets expensive!!

  • Computer freezes during startup

    My Mac book pro. Freezes during startup.  Spinning wheel goes for about 15 seconds, then just stops.  Any ideas?

    Ok, I tried that and it didn't help, but thanks for the suggestion anyway because device drivers are always a pain in this.
    Then I started looking for log file changes because I suspected that something (related) ought to be logged about this nagging bug. The witch hunt directed me towards the google updater agent -- whatever -- that got stuck on bringing chrome to the latest level.
    I read all sort of incompatibilities between google chrome and macbooks, this could be another one. I downloaded the latest version of chrome manually, overwrote the existing implementation of chrome and the freeze-up seemed to vanish.
    Not so nice this all.

  • Imac freezes during startup stops @ blue screen & have tried everything

    My imac freezes during startup, it gets to blue screen and just sits. I have tried to boot from the Leopard 10.5 install disk, and just sits, can't get to log in screen. Have run the disk utility and it says disk appears to be ok, Won't startup up in safe boot, blue screen just sit. Have tried 'fsck' fix, just sits at blue screen. Have reset PRAM, I don't know want else to try. Disk utility & "fsck" says 'disk appears to be ok'. When exiting fsck, it will start the process then stops. Does anyone have any suggestions, I have not tried to reinstall 10.5 yet.
    Thanks in advance
    Paula

    After reading resolutions TS1541 & other threads, I decided to try to archive & reinstall 10.5 from install disc. Well that made things worse, sometime during reinstall, system locked up, I looked at the log during install & it had been locked up about 3 hours and now I have nothing. no systems files, using Target( firewire cable) disc with my macbook, I can see I have previous system folder & a folder that say system. but Install disc does not see OS.
    Do I need to take it to an apple store for repair or what. It's only 3 years old.
    please help
    Paula

  • Freeze during startup

    During startup, the system freezes (no cursor, no keys).
    It boots as far as the "Log On to Windows" screen. The cursor still moves, and then it stops after perhaps 30 seconds
    (keys non-functional too),
    Tried the rescue and recovery but when it gets to Step 1 with choices including "Restore my gard drive to the original factory state" everything freezes again.
    Prior to this problem the system would hang during shutdown.
    How do I get past this point?
    (T43 with XP sp3)

    Welcome to the forum!
    Sounds like a failing SouthBridge chip to me.
    Try removing the hard drive and booting from a "live" Linux CD.
    If you experience the same type of freezing there, you're likely looking at a motherboard swap.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Hello, My Imac is freezing during startup.

    It chimes and bigins loading. The spinning circle freezes after a few moments. It is able to boot in safe mode. Using command v during startup this is the last line displayed "GFX8: family specific matching fails". Also, this Imac has the infamous overheating graphics card problem.

    Have you attempted Disk Repair in Utilities? Are you still using 10.5.8 as your profile suggests?
    As old as your iMac is, have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
    You are now in a perfect position to do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    Here is a link to a Widget to monitor your temps and other operations:
    http://islayer.com/apps/istatpro/

  • CS4 freezes on opening at "Measuring Memory"

    I've seen this posted with no answer before, and the phone support will not assist me because It's CS4, and not the most recent 5.5.
    I cannot open photoshop.  I paid a lot of money for this.  Here's the issue:
    Photoshop crashed when I was trying a save for web on a maybe 5 mb image.  Nothing crazy.  But oh well.  When I tried opening photoshop after that, it froze at "Measuring Memory." 
    I've tried shift+option+command delete preferences restart to no avail.  I'm open to any ideas.  Thanks.

    My guess would be that you have some drives that are asleep, or some remote volumes that are slow to access.
    At that point, Photoshop is trying to get the size and info for all drives on the system so it can match them against the list of scratch volumes (and rule out remote volumes and removeable drives).

  • Freeze during startup if magic trackpad not available

    Down in SF last week and bought a magic trackpad and installed it. worked fine.
    Got home and turned on my MBP; it froze during startup with only the finder window open, no dock, and not much else. mouse pointer couldn't click on things, etc. I tried restarting and restarting into my test (bare bones) account. No luck.
    Then I wondered if the problem was that my new magic trackpad was there and turned on. That was the problem. As soon as I got the trackpad and turned it on, my system completed normal startup.
    Anyone else have this experience. This seems like a bug.

    Today I tried to replicate my problem and couldn't. Either by turning off the trackpad before I shut down or else while my computer was off.
    So apparently my incident was an isolated one.

  • My MacBook keeps freezing during startup

    I got my MacBook Pro in 2012. Currently, it keeps freezing while I try to turn it on. I get the apple logo and the spinning wheel, and eventually it freezes. I've tried starting in safe mode and it froze. I've tried recovery, it "restarts due to a problem during start up" and then freezes again. When it freezes, there are little green pixels on the screen as well.
    Any help is appreciated! Thanks!

    I got my MacBook Pro in 2012. Currently, it keeps freezing while I try to turn it on. I get the apple logo and the spinning wheel, and eventually it freezes. I've tried starting in safe mode and it froze. I've tried recovery, it "restarts due to a problem during start up" and then freezes again. When it freezes, there are little green pixels on the screen as well.
    Any help is appreciated! Thanks!

  • InDesign cs6 freezes on startup

    I'm running InDesign CS6, on a mac powerbook running OSX. When I launch InDesign, the program freezes when it gets to "starting up service registry". I've deleted preferences, and downloaded and installed a new version of the program, all to no avail.
    Date/Time:       2015-02-25 13:37:56 -0500
    OS Version:      10.10.2 (Build 14C109)
    Architecture:    x86_64
    Report Version:  21
    Command:         InDesign
    Path:            /Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/MacOS/Adobe InDesign CS6
    Version:         8.0.0.370 (8000)
    Parent:          launchd [1]
    PID:             2806
    Event:           hang
    Duration:        2.20s (process was unresponsive for 129 seconds before sampling)
    Steps:           23 (100ms sampling interval)
    Hardware model:  MacBookPro10,1
    Active cpus:     8
    Fan speed:       2157 rpm

    And make sure you do a complete job of resetting the prefs. See Replace Your Preferences

  • MBP 13" Aug 2009 Lion freezes during startup

    Just wondering if anybody else is having this problem.  I just upgraded to Lion from Snow Leapord.  I now am having issues with my computer freezing right after start up.  It will only do this after it appears to boot everything up, however it will just sit there and the cursor turns into the spining rainbow.  It just started happening after i installed lion. 
    I bought this computer in August of 2009.  I seems to only do this when I have it try to reopen all windows after restart, weather I have anything open or not.  I have to hold down the power button and try it again, usually 2-3 times and it will be alright.
    Anybody else having this issue?  Is there anything I can do to fix this?  Hopefully it is a known issue with Apple and they will resolve it.  This computer has been great!  Never once had any freeze or anything until now. 
    Thanks in advance
    Brian

    Thanks guys, I have 4 GB of Ram and 368 out of 500 Gigs of free HDD space.  I called the Apple care guys, AMAZING SERVICE, just amazing.  We ran through some tests, created a temp login, the problem went away with that. I the ran the disk utility.  Verified the disk, repaired during start up using the recovery HD.  Then repaired the disk permissions.  Problem is fixed.  I have rebooted several times and have not had a hang up yet.  So I think during that night I updated to lion, i also updated i life 11 as well.  So I think something just got messed up a bit. 
    So all is well.  And I am happy again! 
    Thanks for the replies

  • IMac freezing during startup

    So I was working on my iMac the other day and all of a sudden the screen went blank (grey screen). Turned it off using the power button and restarted it. I get the chime and the apple logo coming up with the scrolling wheel below but then the screen goes blank and I can't get any further than that.
    Have tried booting up in safe mode (Shift), verbose (Cmd+V), starting in Recovery System (Cmd+R), Single User Mode (Cmd+S) and resetting the NVRAM/PRAM (Option + Cmd + P + R). Nothing has worked. Always get to the apple logo and scrolling wheel only to freeze on a gray screen after that.
    Can't find my Install Disc but have tracked one down that I'm going to try tomorrow.
    Besides the Install Disc does anyone have any suggestions that could help me out? Only have a portion of my HD backed up (stupid I know) so really hoping this issue is solveable and that I can salvage what I have on that computer.
    Thanks!!

    Try booting while holding down the Option key.
    Theoretically that should launch the Startup Manager window where you can select the startup disk then click Restart.
    The original install disc cannot repair the startup disk on a Mac running v10.7 Lion. Only OS X Recovery

  • Macbook pro freezes during startup after Yosemite

    hello, i have a Macbook Pro (Retina, 15in, early 2013). I have since used it and never had any problems. i am also running the latest version of parallels (which i just updated before downloading & installing the update from Mavericks to Yosemite. Since installing Yosemite, i was able to use my macbook for about a day...suddenly during a login attempt i kept gettting the spinning wheel & the computer would just freeze.. ive been reading this comments & questions for the last 3 days & tried as much as i am capable of. I can not get the computer to boot in safe mode... i CAN boot it holding commandR...but than at that point i ran disc utility and it said no errors... I am utterly lost....this macbook doesnt come with a built in CD/DVD drive and i have NO CLUE how to properly back up anything...i DO NOT KNOW WHAT TO DO...can someone PLEASE help me using as much LAYMANS terms as possible? I truly appreciate ANY HELP!!! thank you in advance

    ... and i have no idea what else to do :?
    Return that RAM and buy either the Crucial ram (http://www.crucial.com) for your system or buy from OWC (http://www.macsales.com). I've used Cruical ram in many systems over the years with no issues, and have bought Samsung (factory fill) from OWC with no issues either.

  • Lightroom 4.2 freezing during startup

    My Lightroom starting freezing recently.  It says the program is not responding. I was on the phone with Tech Support two days ago.  They re-loaded the program and I re-imported the catalog and it worked as usual, but today again the same problem surfaced; upon startup of the program it locks up and if I click anywhere in the Lightroom window it says the program is not responding and whites out moments later a Window's message says the  program is not responding giving me choices of "Close the program" or wait till it responds, which it never does.  I see others that are having a smiliar issue with 4.2 . I have a Gareway computer with Windows 7 64 bit  How do I fix this and why is it happening over and over?
    Thanks

    What else is connected to your computer?  Network or external drives?  Printers with card readers?  Or the main cause at the moment - phones?

  • Premiere Pro CS6 freezes during loading

    Having used thsi programm several times successfully all of the sudden since today, after a few seconds of loading process of Premiere Pro CS6, loading process always starts freezzing at loading stage : "loading ExporterQuickTimeHost.bundle" (Mac OS). Deinstallation and reinstallation didn't help.
    Can someone help me?

    The following is the crash report (extract) of Adobe Premiere Pro CS6. Maybe some of new has some system knowledge.
    Process:         Adobe Premiere Pro CS6
    Path:            /Applications/Adobe Premiere Pro CS6/Adobe Premiere Pro CS6.app/Contents/MacOS/Adobe Premiere Pro CS6
    Identifier:      com.adobe.AdobePremierePro
    Version:         6.0.0 (6.0.0)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd
    Date/Time:       2012-10-03 22:54:32.002 +0200
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          -6877 sec
    Per-App Interval Since Last Report:  457 sec
    Per-App Crashes Since Last Report:   3
    Anonymous UUID:                      C1440D44-6720-4316-9D5B-DA9C509698E4
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   com.adobe.premiere.frontend       0x000000010c6c8e38 FE::Application::AttemptPanicProjectSave() + 18
    1   com.adobe.premiere.frontend       0x000000010c7207cc UnixInterruptSignal(int) + 44
    2   libSystem.B.dylib                 0x00007fff83bf01ba _sigtramp + 26
    3   libSystem.B.dylib                 0x00007fff83b8fdc2 semaphore_wait_signal_trap + 10
    4   libSystem.B.dylib                 0x00007fff83b9540d pthread_mutex_lock + 469
    5   com.adobe.QT32Client.framework    0x000000010d0895d6 ASL::SingletonSupport<ASL::InterfaceRef<QT32Client::QT32Client, QT32Client::IQT32Client> >::CreateClassRef() + 54
    6   com.adobe.QT32Client.framework    0x000000010d05f747 QT32Client::Create() + 23
    7   ...rterQuickTimeHost.framework    0x0000000133e1b01e ExporterQuickTimeHost::OnStartup(exportStdParms, exExporterInfoRec) + 28
    8   ...rterQuickTimeHost.framework    0x0000000133e1e6fe PrExporterModule::ExportEntry(int, exportStdParms, void, void*) + 68
    9   ...rterQuickTimeHost.framework    0x0000000133e1e4e1 xSDKExport + 81
    10  ...dobe.ExporterHost.framework    0x00000001047f71b3 ML::CallExporterModuleGuarded(int ()(int, exportStdParms, void, void), int, exportStdParms, void, void*, std::basic_string const&) + 131
    11  ...dobe.ExporterHost.framework    0x00000001047f7483 ML::ExporterPluginModule::CallExportModule(int, void, void) + 405
    12  ...dobe.ExporterHost.framework    0x00000001047f6fe3 ML::ExporterPluginModule::StartupFromDisk(unsigned int, bool) + 353
    13  ...dobe.ExporterHost.framework    0x00000001047c162c ML::ExporterModuleFactory::CreateUnknown(ASL::InterfaceRef&) + 308

Maybe you are looking for