CS6 gives me bad rendering results on Vimeo and the MacBook. Plays fine on the render PC.

Hi there,
After upgrading to CS6, i'm facing some pretty severe problems with rendering.
My edit machine - my windows machine - plays the clips fine, but in the moment I watch the clips on my MacBook, iPad, Vimeo, Youtube some really nasty artifacts starts to show.
I just made a clean install of Windows 7 with all the latest drivers.
The system is:
Windows 7
Geforce GTX 570
12 GB ram
Intel i7 4,1ghz
I use Magic Bullet Looks for grading.
I guess that is what's relevant!?
I'm really absolutely clueless about what is causing this. I tried to render with Media Encoder, as well as the Premiere. Same result.
Attached is a screendump from Vimeo that shows the problem.

Really? Are you on a PC?
I tried on 3 different macs now + iPads. I have the same artifacts and glitches as seen on the first attached image.
On my PC though, it looks fine!
So weird...
Just uploaded a quick clip, where it originally fades from black. On my screen, it fades from grey, and stutters a lot. Really a pain to watch really.
https://vimeo.com/45768812
pw: cs6

Similar Messages

  • Just completed a clean install of CS6 Photoshop on my Yosemite Mac Book Pro and the Adobe Application Manager does not work and cannot install a fresh copy from Adobe

    Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy.  What should I do?
    I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM.  But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install.  It is like an infinite loop!
    Please, someone help!
    Thanks!

    HI gener7!
    I'm sorry but I am not on Creative Cloud.  I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application.  My AAM version is:  8.0.0160
    The link you provided was the update that I wanted to install but it does not work.  A window shows up during that install that says:
    We've encountered the following issues.
    Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem.
    and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
    Thanks!

  • Different results between DD03L and the same structure in transaction SE11

    Hi Experts,
    I created a 'Z' structure and when I see this structure using trx se11 are displayed 10 fields but when I see this same structure through the table DD03L are displayed 15 fields.
    I created again 2 of 5 fields that were missing and the register was duplicated for that field in the table DD03L .
    Someone already see anything like this??
    Best regards and thanks in advance.
    Caíque Escaler

    hi check this...
    dd03l is for the tables and i didnt think for the structures..and give  the structure name  in the DATA TYPE it will show the structure you had created ..see the header text for the dd03l and u will get  what it is exactly
    se11->data type  zstructure->f7(display)..
    regards,
    venkat

  • Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips. Later it stops rendering on every restart and the machine was normal and faster. Now it keeps crushing on every restart

    My Final Cut X changed behaviour after conneting the external monitor via HDMI. Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips after every restart. Later the dual screen icon disapeared on the top of my screen and it stops rendering on every restart like before and the machine was normal and faster. Now Final Cut won't start anymore whenever I start it loads and crushes immediately on every restart.

    Upgrade FCPX

  • [LV - TS] How to execute a SEQ file, get the result (PASS/FAIL) and the report file ?

    Hello,
    I'm looking for the most obvious and simple way to, from Labview :
    1- Start the Teststand engine : DONE
    2- Get a list of SEQ files to execute : DONE
    3- Loop through the list to execute each SEQ file : <- found some examples but I have some trouble with the UIMessage stuff
    http://zone.ni.com/reference/en-XX/help/370052N-01/tsexamples/infotopics/executing_sequences_using_api_labview/
    4- Get the result of the SEQ execution : <- unsure
    5- Get the XML path+name of the report file generated : <- obviously not easy
    http://digital.ni.com/public.nsf/allkb/3D3B2358DF9B786B8625789500549A3B
    http://forums.ni.com/t5/NI-TestStand/Getting-Report-File-Path-location-at-execution-in-TestStand-2012/td-p/3041789
    Here is my current implementation :
    David Koch
     

    Hello,
    I tried to work from this example :
    http://forums.ni.com/t5/NI-TestStand/Execution-of-TestStand-Sequence-in-LabVIEW-via-TS-API-Different/td-p/2939616/page/2#M46686
    However it remains unclear about how to get a simple
    answer from just running a sequence file out of any
    model so far (Simple Pass). Like I told you, all what
    I need, once the TS engine is started, is a VI with the
    following interface :
    INPUT
    1- TS engine reference
    2- SEQ file path (path or string)
    3- Sequence name to execute
    4- UUT string (optional, but yeah)
    5- error in
    OUTPUT
    1- Result boolean (PASS/FAIL)
    2- Path to XML report
    3- error out
    It would be so cool to just have this
    About the surrounding UI, I'm working on it. The LV
    code is not really important at this point, it's running
    a SEQ file that matters to me.
    David Koch
     

  • Bad connection among an Iphone and a MacBook Pro

    I may not connect trough Face Time with an Iphone. Please let me know if it is some error reported. Thanks.

    Hey kbert73
    I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/ht4527
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Any idea why my *.mts video files won't play audio in Bridge CS6? Imagery plays fine.

    I'm using a Windows & Dual Quad machine.

    Thanks Curt!
    Here's some more info. The *.mts files from Panasonec GH2 play fine in VLC and WMP.  When I tested oher edited files, originating from mts files, and edited in PP-CS5.5 and exported as mp4 files, the audio and video in the mp4 files play just fine in Bridge CS6. Also the audio in mov and avi files play fine in Bridge. Just to see if it had something to do with the file structure on the capture card, I recorded some video with audio and played it directly from the capture card and the audio still wouldn't play. So, it appears that Bridge CS6 currently can't handle the audio in the Panasonid mts wrapper unless I were to transcode it to mp4 or mov, etc. I'm concerned that this might result in some loss of quality, possibly baloon file size, and waste more time than it's worth.
    My work around to date is to associate mts files with wmp in Windows 7 (Control Panel\Programs\Default Programs\Set Associations) so that when I double-click on the mts files in bridge, both the audio and video will play OK in wmp and I can move forward.

  • How can I reduce the width between search results and the preview fly-out?

    Hello, I am using a custom masterpage that reduces the overall width of page content but I am seeing an issue with my enterprise search site. The search results look fine but there is a large horizontal gap between the results and document preview window
    (when mousing over a word/excel/powerpoint result). This means that the preview fly-out is hardly visible unless the user scrolls horizontally to the right. Can someone tell me how to set a reduced width between the results web part and the preview window?
    Example:

    I think the issue is with the Callout orientation, have you customized the page and if so then you can customize the callout.
    check "beakOrientation" and you can set values like topBottom, leftRight as per your requirement.
    see here for more information -
    http://msdn.microsoft.com/en-us/library/office/dn135236(v=office.15).aspx
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • BADI Differences between 4.7 and ecc 6

    Dear experts,
    Can any one tell me the differences in BADIs in 4.7 and in ECC 6.0
    Thanks in advance
    somesh

    Hi Venkat,
    SOURCE: difference between badis in 4.7 and ECC 6.0
    The u2018BADI-su2019 (Business Add-Ins), as they exist in pre NW04s releases are now called old classic-BADIu2019s (release 4.6 ). This was the first object-oriented way to enhance the ABAP system. This, to a certain extent, allows multiple implementations with limited filter support. The classic-BADIu2019s are implemented using ABAP Objects.
    With the introduction of Enhancement framework from E.C.C 6.0 a new BADI concept in additional to the old classical BADIs has evolved called as Kernel-BADI enhancement.
    The old classic-BADIu2019s are implemented purely at the ABAP Workbench level; that is, both the definition and implementation are realized as workbench repository objects (global classes and interfaces).
    The new Kernel-BADI takes it to the ABAP language level. Because of this, the new Kernel-BADIu2019s are much faster compared to the old classic-BADIu2019s.
    There are two new ABAP statements available now to support the Kernel-BADIu2019s, namely GET BADI and CALL BADI.
    Example:
    data bd_hdl type ref to badi_name.
    GET BADI bd_hdl filters filt_1 = u2018VALUEu2019.
    CALL BADI bd_hdl->method
    exporting param_1 = 10.
    The old classic-BADI used to mix both implementation selection and method call in the same CALL METHOD statement. The implementations could only be chosen at run-time because of the above reason and due to the fact that the BADI handle could only be gotten from another method call by passing the BADI name.
    Whereas in the new Kernel-BADI, the active BADI implementations are included into the load of BADI handle at compile time and the filter criterion are expanded as IF statements. This is the reason the new Kernel-BADIu2019s are much faster than classic-BADIu2019s.
    Some of the other new features of Kernel-BADIu2019s are,
    u2022 Improved Filters with complex filter condition editor
    u2022 Stateful BADI support and Context based lifetime control
    u2022 Possibility to inherit the implementations
    u2022 Switchable using Switch Framework 9
    Have A Nice Day
    Chaitanya.

  • Adobe Photoshop CS6 Very Slow On Rendering Type

    I have a notebook with specification as mentioned below :
    Lenovo Ideapad Y470P
    2nd generation Intel Core i7-2670QM Processor( 2.2GHz 1333MHz 6MB)
    Windows 7 Ultimate x64
    AMD Radeon HD 7690 2GB
    8.0GB PC3-10600 DDR3 SDRAM 1333 MHz
    750GB 5400
    I'm using Adobe Photoshop CS6 (64 Bit) for doing my job.
    Right now, i have a task to create a banner with dimension 800 x 900 Centimeters with Resolution 300 DPI and Color Mode RGB 16 Bit.
    The file size when blank is about 56.1 GB.
    The problem is, when i add some text with Horizontal Type Tool and click on the Move Tool, the Rendering Type screen show up and take a very very long time to finished.
    I have made some configurations to my Photoshop that i found on Adobe Forum, but the problem still persisted.
    Some configurations that i've made is :
    - Turn off the Automatically Save Recovery Information
    - Set Maximize PSD and PSB File Compatibility to Ask
    - Set the Memory Usage to 95%
    - Set the Cache Levels to 8 and Cache Tile Size to 1024K
    - Set the Graphics Advanced Settings to Drawing Mode Advanced, and Check the option Use Graphics Processor To Accelerate Computation, and Uncheck the option Anti-Alias and 30 Bit Display
    - Set the Scratch Disk to another partition ( C:System D:PageFile E:Data F:Scratch Disk)
    And after all of that configuration, my Photoshop still slow when Rendering Type.
    Could you give me some tips to solve my problem?
    Thanks

    300 ppi for a banner that size is categorically not normal.  Guaranteed. 
    Get specific instructions from the shop that is going to print it.
    You keep confusing ppi with dpi.  The resolution of an image file really is expressed in ppi, pixels per inch, not "dpi" which is dots per inch.  The precise terminology is as follows:
    DPI = Dots per inch = units used to measure the resolution of a printer
    LPI = Lines per inch = The offset printing 'lines' or dots per inch in a halftone or line screen.
    PPI = Pixels per inch = the number of pixels per inch in screen/scanner file terms.
    Here's a link to a discussion that may interest you:
    http://graphicdesign.stackexchange.com/questions/487/what-ppi-should-a-large-format-artwor k-for-print-be-done-at
    It includes the following chart and subsequent comments :
    "The rule of thumb is that we need 1.5 to 2 times the LPI in PPI to get acceptable results.
    "Viewing Distance   Present Study    
    20 feet    greater than 10 LPI  
    18 feet    18.75 LPI or greater 
    16 feet    18.75 LPI or greater 
    14 feet    37.5 LPI or greater  
    12 feet    37.5 LPI or greater  
    10 feet    50 LPI or greater    
    8 feet     65 LPI or greater    
    6 feet     85 LPI or greater    
    4 feet     100 LPI or greater   
    2 feet     133 LPI or greater   
    1 foot     150 LPI or greater   
    6 inches   150 LPI or greater
    "Presumably, for a banner 3m x 5m, you'd be standing at a minimum of, say, 10 feet. (Just eyeballing the wall here.) So, by this table, you'll need 50 LPI minimum. That would mean your raster graphics should be about 100 PPI, or 75 PPI at 12-14 feet. Considering that and the fact that 2x LPI is pretty conservative for reproducing fidelity (often 1.5xLPI is "enough"), this agrees with [the given] advice of 75 PPI being acceptable."
    Talk to your printer.  I suspect they will want a file at under 75 ppi, or even much less.  Follow the printer's advice/request.

  • Premiere CS6 Unknown Error in Rendering & Export

    Hello,
    this is an ongoing problem that persisted on any version of Adobe Premiere Pro I worked with, including CS5,5.5 and the latest 6.
    I am stuck with a feature film on a CS6 Timeline, getting an Unkown Error during rendering and Media Encoder exports. 
    I get the same error if I attampt to create a new trimmed project with Project Manager.
    I am aware that this is one of the most common problems in this forum, and before opening a discussion I tried everithing I could:
    - Replace the media at the point of the error/crash (even though the error seems to happen randomly in dirrerent portions of the timeline)
    - Disable MPE
    - Reset Secutity and permission on files
    - change hard drive
    - Create a new sequence
    - Disable second monitor
    I have to bring an export of my film and a new trimmed project by tomorrow to a color house and I am currently stuck.
    I managed to render the entire timeline before exporting. Redering would stop randomly, generating the same "Unkown Error in Copiling Movie".
    Although I rendered the entire timeline by creating different IN-OUT with the work area selection.
    After a long and tetious rendering process I managed to have the entire timeline "green" and ready to go.
    I figured that this way the exporting process would have been successful. Unfortunatelly not.
    I switched to Premiere Pro for its ability to edit R3D media, but what's the point if we cannot export the project? And neither trimm it to a file that I can give to a colorist?
    Here some details of my workstation and source media:
    - MacPro 12cores 64Gb ram
    - Internal 6Tb raid for source media
    - 4Tb Dulce Scratch drive
    - Editing 4K and 5K R3D Media natively
    If anyone found a solution to this problem, please help.
    Thanks

    Hi Neonhigh,
    If you are going to color correction, why do you need an output? Aren't they color correcting the native files?
    I need an output as reference for the VFX department, I need an output for the sound designer, I need an output for the producer, I need an output for myself and to send to my girlfriend. The question I should ask you is, why shouldn't I need an output?
    What's wrong by exporting my timeline in a format that is not r3d files for reference and production management?
    I was talking about color correction only, as they usually only need the native files. Of course, an output would be necessary for all the other things you mentioned. Nothing wrong with that.
    Neonhigh wrote:
    If you need an output for some reason, why are you rendering at all?
    As I explained I simply rendered because the software was having several random "Unkown" problems in exporting. I though rendering and exporting a file matching the timeline settings would have solved those annoying Unkown Errors, giving me at list an export based on the render sttings.
    Problem is that PPro CS6 fails also to render the timeline, and I needed to break the process in 30-40 segments in order to achieve a complete rendering.
    Rendering in Premiere Pro is primarily for playback, and not necessary for output. In fact, it's a waste of time in most cases. Render files are typically not used for an output unless you explicitly want to do so. Typically they are lower resolution "preview" files that you don't want to use.
    Regardless, you should have no trouble rendering sections of your Timeline. Are you updated to Premiere Pro CS6 (6.0.2)?
    Can you try an export without rendering?
    I wish PPro CS6 was reliable enough to allow me to simply export.
    I still did not solve the problem. Several people from the redusers forum are trying to help me as and they all ran into the same issue.
    Currently this are the issues:
    - PPro does not render the entire timeline
    I'm trying a test project right now and so far it is rendering OK. Can you point me to the reduser forum post where people were giving you assistance?
    - does not output the entire timeline (if not chopping it in 12-15 parts)
    I'll test that, as well. You should not have to segment the sequence in order to get an export.
    - Project Manager does not trim the project to pass it to over post prod facilities.
    Sorry, the Project Manager will not consolidate every media type. It will copy, however. This would be a feature request or bug report: http://www.adobe.com/go/wish
    Beside questioning me with why I want to render or export my project,
    Not questioning your capabilities or talents, I just wanted to know what you wanted to do, and why. Typically, most people don't render as much in Premiere Pro as they do in other NLEs and I was wondering why you needed an export to go to color correction. That's all.
    Many users in this forum (as well as on the entire internet) experienced th same Unkown Problem:
    http://forums.adobe.com/message/4661398
    There could be many different variables which can cause that error. The troubleshooting doc you found addresses many of those. I will add the "Unknown Error" warning to the document.
    There is no "single fix" for this problem, I'm afraid, and these are our opinions and solutions on the matter.
    A legitimate gripe would be that the error is too generic, and I would agree with you there. The error should contain more details about how to remedy your issue. Please make a feature request for more descriptive error dialog boxes: http://www.adobe.com/go/wish
    I will also mention it to the product team.
    I understand that, being an "Unkown Errror" Adobe does not have a iniversal fix, but please don't ask me why I want to output my timeline.
    Again, I was only asking in the context of color correction. Of course, you want an output for various reasons.
    I've written up your bad experience in my case notes and I'll do my best to get you some better answers to your questions. You definitely should not have to jump through hoops to render or export a .R3D sequence.
    Neonhigh wrote:
    Here is a temporary fix for who runs into this problem:
    Yesterday, after trying everything I could think of I simply exported an XML, opened it in Final Cut Pro and exported all the files and formats that I needed. No Unknown Errors.
    Thanks for the workaround. I'll add it to my notes.

  • Using previous rendering result

    Hello all,
    I write an effect plugin which work interactively with layer/composition viewer. Effect uses its own brush (see Paint or Distort->Liquify effects for example) and user can draw something on video with this effect.
    Example:
    So i rerender current frame with each user action (with each new brush stroke added). I save all strokes and can render resulting frame from "source" layer frame, but this way is a bit slow. More efficient solution is to use result of previous rendering and apply new brush stroke to it.
    Is there a way to get previous rendering result for current frame in AE? (it should be saved in cache at least).
    Thanks!

    Thx for reply, shachar!
    shachar carmi wrote:
    i'll begin with the bad news.
    you can't ask AE for the last output of your plug-in.
    maybe it's cached, maybe it's not, but either way you can't access it.
    Thx, my doubts are gone)
    shachar carmi wrote:
     you can cache it yourself in the sequence_data memory block.checkout the following thread:
    http://forums.adobe.com/message/2732025#273202
    it's very similar to what you'd want to do if you choose to cache your output.
    Yes, i agree. I thought about it too. But when I attempted to realize this solution first I faced with the problem of input frame resolution chaos (when AE can't calculate result realtime, it try to get result with lower resolution). Indeed, your proposal partially solves the problem.
    Thanks again.

  • Bad http result code 501 when submitting a validated feed to iTunes

    I have a podcast feed that I've validated at http://validator.w3.org as well as http://www.feedvalidator.org.  Both tests say that my feed is valid.  When I try to submit the feed URL to iTunes, I get the response: "We had difficulty reading this feed. Bad http result code: 501".  Any suggestions as to what I'm missing?

    Although your feed validates, and can be accessed in a browser and subscribed to in iTunes - and also the media files are correctly hosted on a server which can handle byte-range requests (a required facility) - the server hosting your feed is for some reason unable to handle requests specifically from the iTunes Store. This situation has arisen before but no obvious solution has been suggested (one poster with a similar problem found that it was a permissions issue on the server). This is something you will need to take up with the people running your server - their logs may possibly give some indication of what the problem is.

  • I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. The recycled the drive i

    I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. They recycled the drive immediately (like a fool I didn't ask for it back to get the data off it.) But luckily I have all my data on CrashPlan. I downloaded it and it worked great except I downloaded it to the desktop and not the original location so it got squirrely. I also have an external 1.5Tb drive that I wanted to make bootable so I installed Mavericks 10.9.3 . I then went ahead and installed it on the newly installed drive too.
    I think that because I have a new drive Adobe thinks I have a news computer. I bought the 27" Mac brand new from Ebay and it came loaded with software, including CS6. I have a serial number for CS6 but Adobe said it wasn't valid. (I have owned CS2, CS4 and now CS6 which came preloaded onto the Mac by the seller who told me that the software was registered to the Mac???
    I am going to re-download the backup but this time to the original location (I still don't think it will work with Adobe. What can I do about this?
    iMac 27-inch, Late 2012
    Processor  3.2 GHz Intel Core i5
    Memory  32 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GTX 675MX 1024 MB
    Software  OS X 10.9.3 (13D65)@

    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/

  • 2nd week running, I received an e-mail saying a new episode of Breaking Bad is available.  When I go to download its the "Inside Breaking Bad" short (which gives away spoilers - thanks Apple!) but not the episode itself.  What gives?

    2nd week running, I received an e-mail saying a new episode of Breaking Bad is available.  When I go to download its the "Inside Breaking Bad" short (which gives away spoilers - thanks Apple!) but not the episode itself.  What gives?
    I've tried this on multiple products so I believe its specific to iTunes not a particular device.

    Same thing here- Get the email but nothing but the Inside featurette. It's really annoying. In fact I can't even download it normally using the check for available downloads feature! Every time I do that iTunes tries to download doubles of three Walking Dead episodes I've already downloaded. I don't want what I already have, I just want the new episode.

Maybe you are looking for