CS6 H264 Blu Ray Export Dolby Digital not bitrate selection Issues

Hello,
if we try to export in H264 for Blu Ray Format and switch to Dolby Digital the bitrate selection vanishes from the setting:
But if we deselect the audio export and select it again the bitrate can be set correctly.
Seems to be a small error in the media encoder CS6

I'm seeing the same thing here.

Similar Messages

Premiere Pro CS6 H264 Blu-ray encoder does not do MBAFF interlace

I have been testing the Premiere Pro CS6 H264 Blu-ray encoder with some HDV video 1440x1080i25 top field first and I have found that it always encodes as PAFF even when the MBAFF box is ticked. I analysed the stream with h264_parse and found that the mb_adaptive_frame_field_flag is set to 0 and that the pic_struct flag alternates between 1 and 2. These indicate that the encoder is using PAFF when the MBAFF flag is ticked.
The CS5 encoder does work as it sets the mb_adaptive_frame_field to 1 and the pic_struct to 3 which is correct for top field first.
There is another problem in that Premier pro does not recognise field order of correctly encoded MBAFF video. It reports tff video as progresive and bff as top top field first.
MBAFF generaly gives higher quality pictures.
Regards Trevor

For obvious reasons I do not like to be constanly connected to the internet with my Video Edting PC.
There are no 'obvious' reasons not to stay connected (if you know what you're doing), and in fact very good reasons to do so (more so if you're a Creative Cloud subscriber).
Having said that, there is a way to get the PDF to come up when you hit F1, instead of the online help. I just don't recall where that setting is.

I used the digital download from my purchased Blu-Rays and they will not sync with either my iPad or iPhone 4, saying they did not transfer because I am not authorized on this computer. I tried de-authorizing and re-authorized my MacBook Pro already

I used the digital download from my purchased Blu-Rays and they will not sync with either my iPad or iPhone 4, saying they did not transfer because I am not authorized on this computer. I tried de-authorizing and re-authorized my MacBook Pro alreadydigial

I just got a Touch 32GB yesterday and ran into the same problem. I have two PCs in the house that I can sync my iPods on, but I normally use one that DOESN'T have an internet connection, so that the one that does is free for others to use ... a great argument and tension solution, btw.
Anyway, I hooked up the older "iTunes" PC to the net for a first-time sync with the Touch, and ran into this problem. First it kept detecting the Touch as an unidentified iPhone, then I couldn't sync my classic either. Then I found a post here about how when multiple USB ports running off same USB controller seem to screw with the Touch/iPhone syncing.
So I disconnected all but 2 of my USB 2.0 slots (the Touch & the Portable HD with my iTunes Library) and now it's working perfectly. I don't know if this will solve your problem, but it might be worth a try.

If i buy a blue ray with a digital copy and if i download the movie on my PC from work, i will be able to download it on my Mac at home later on?

if i buy a blue ray with a digital copy and if i download the movie on my PC from work, i will be able to download it on my Mac at home later on?

No, it will be a one use only code. Copy the file onto a memory stick and import it into your library at home later.
tt2

HT201272 I typed in a digital copy code to get Rise of the Guardians on here because I bought the blu-ray, but the digital copy won't download no matter what I do. Why won't it download? Right now I am very angry for not getting the digital copy.

I purchased Rise of the Guardians on blu-ray, I typd in the digital copy code that came in the case, the ituns extras downloaded, but no matter what I do, the digital copy of the actual movie won't download. Why won't it download? I've tried everything I could think of, but nothing works, it just simply does not want to download.

Ok, a new digital copy of Rise of the Guardians started downloading automatically at no extra cost, I admit that I was thrilled, but now my happiness is gone because the new digital copy of Rise of the Guardians simply won't play. Nothing works with it except for the iTunes extras again. I'm getting really tired of this. Why won't it play and why give a digital copy if it refuses to work? Please someone help me out here!

Blu-ray export quality

When burning 1440x1080i25 to Blu-ray in Encore: in Export Settings, should you set it to High Quality or Long Form or Maximum Quality to get the best visual quality from normal DV tape footage?
Why when I select PCM in audio does it revert to Custom, and what is Custom? (which of the above three is it?)

When you first enter Encore, in the New Project box, in Advanced tab, in Audio Transcoding Scheme, you can select Dolby Digital, MPEG-1 Layer II (greyed out), or PCM. Then if you click File > Edit Quality Presets > Audio, you can select either Dolby Digital or PCM for the Audio Format Settings.
I need to know whether Dolby Digital will encode my music unaltered, or whether it will compress the VU level (make the loud parts softer and the soft parts louder)
It would also be useful to know whether PCM encoded sound will play on all BR players?

Dolby Digital Not Decoding Properly

I have an Apple TV with the latest software. I am running the output via HDMI to a Denon 1909 AVR.
The Denon does not automatically recognize when dolby digital 5.1 is coming in like it does with other sources, however, I can see that the input is 5.1 and can change the receiver so it is in DD or DD EX modes. When not in DD or DD EX modes, everything is fine. However in DD or DD EX modes, the sound is good except for one very important piece - no dialogue is coming through - like it is missing a channel or something.
I have tried switching HDMI cables with no change.
DD 5.1 works perfectly from Dish TV, Blu-Ray and DVD sources, just not from Apple TV.
I am using itunes downloaded HD TV and SD movies that specify DD 5.1.
Anyone have any ideas on how to fix this?

I also have just recently purchased Apple TV and am running it into the VCR port on a Bose V30 system, I have decided to use the component and optical ports on the Apple TV running into the back of the Bose surround system. I get Dolby 5.1 through Bose off my SKY HD and also PS3 using optical but not through the Apple TV. I only get PCM, sometimes even no sound at all, although once a movie or music running if I flick between audio sources I do eventually get sound. I wanted to know if anyone else has had this problem with this setup. I'm unsure at the moment how many movies rent or buy in i-Tunes are actual Dolby presentations? Does anyone know how this is illustrated in the store?
Thanks in advance

Blu-Ray Export Settings

I am in the process of finishing a Blu-Ray project and I want to export it for Blu-Ray discs. Usually I would 'build' an ISO and burn that to a disc, so my first question is, is that the best way to do it? Export an ISO of the project and then burn that onto discs, or should I burn to discs straight from Encore?
Secondly, should I build a BD-R or a BD-ROM (and would I need different discs?) I want these Blu-Rays to play in most Blu-Ray players if not all. And also, what is BD-ROM content that I can add?
My last question is how do I name the Blu-Ray disc so for example, when someone puts it in their PS3, it says the title of my film instead of "untitled"? Is this something in Encore or in my ISO burning program (providing I burn ISOs)?
Thanks!

Export an ISO of the project and then burn that onto discs, or should I burn to discs straight from Encore?
Partly because Encore burning effectiveness was poor in the past, many of us have never tested it in CS6. So I much prefer build to image (or folder) and burn with something else (I use ImgBurn).
Secondly, should I build a BD-R or a BD-ROM (and would I need different discs?) I want these Blu-Rays to play in most Blu-Ray players if not all.
The selection of disk type when building to an image is regarding the type of disk you will use. Re the compatibilitgy issue, see this thread, starting with Neil's post at 16:
http://forums.adobe.com/message/5450695#5450695
how do I name the Blu-Ray disc so for example, when someone puts it in their PS3, it says the title of my film instead of "untitled"?
Not where I can check it, but I believe you just have to name the disk in disk properties. (Select the "disk" in the flowchart, or click in an open area of the project panel.)

Blu Ray export is corrupted, help!

When exporting as Blu ray, FCP burns the disc allright, but when I view it with my blu ray player, all the video clip parts of thw movie are replaced with one 2second loop from the beginning of the movie. All photos show correctly though, and the sound plays properly in the background. In the timeline the movie plays correctly. FCP has rendered it 100%.

Go back to http://forums.adobe.com/community/encore/encore_general
Enter
export file not found
in the area just under Ask a Question
You may now read all the previous discussions of your error... be sure to click the See More Results at the bottom of the initial, short list
There are MANY previous discussions of this problem

Premiere elements does not recognize Blu-Ray disc, says media not present. Under 12 I was able to record 3 blu-ray dvds using the same burner and discs I'm trying with 13. What is the problem?

I installed PE13 and cannot burn blu-ray DVDs. I was able to burn 3 blu-ray DVDs using PE12. When I select DVD from the menu it recogniazes that it is not a stadard DVD as I get an 'incorrect media' error message. It will burn standard DVDs of the same video using standard DVD mefia.
What is going on here?
When I loaded PE 12 back on the computer I cannot load a file created with PE13. Looks like a format change? Can I convert file back to PE12?

Juergen
Terrible news. Sorry about that.
The following is an excerpt from my Premiere Elements 13 blog post, the section on Publish+Share/Disc
The ISO Image choice is only in Premiere Elements 13.
DISC. Major Changes Include Burn to offering ISO Image for DVD, Blu-ray, and AVCHD plus 2 new 1080p @ 23.976 presets for Blu-ray.
The major categories of Publish+Share/Disc/ are DVD, Blu-ray, and Blu-ray. DVD and AVCHD offer burn to disc, folder, and new ISO image. Blu-ray offers burn to disc and new ISO image.Like 12, the new version's DVD, Blu-ray, and AVCHD presets do not have an Advanced Button under which to customize the preset and do not have a "Share Work Area Bar Only" option for selective sharing of the Timeline content Sketch of DVD, Blu-ray, AVCHD includes
DVD (new features)
Burn to:
Disc
ISO Image (4.7 GB) NEW
ISO Image (8.5 GB) NEW
Folder (4.7 GB)
Folder (8.5 GB)
Presets
NTSC_Dolby DVD
NTSC_Widescreen_Dolby DVD
PAL_Dolby DVD
PAL_Widescreen_DVD
As before in 12, frame rate is 29.97 interlaced frames per second NTSC and 25 interlaced frames per second PAL.
AVCHD (no changes)
Burn to:
Disc
Folder (4.7 GB)
Folder (8.5 GB)
Presets
H.264 1440 x 1080i NTSC Dolby
H.264 1440 x 1080i PAL Dolby
H.264 1440 x 1080p NTSC Dolby
H.264 1920 x 1080i NTSC Dolby
H.264 1920 x 1080i PAL Dolby
H.264 1920 x 1080p NTSC Dolby
Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
Blu-ray (new features)
Burn to:
Disc
ISO Image (25 GB) NEW
ISO Image (50 GB) NEW
Presets
H.264 1440 x 1080i NTSC Dolby
H.264 1440 x 1080i PAL Dolby
H.264 1440 x 1080p NTSC Dolby NEW
H.264 1920 x 1080i NTSC Dolby
H.264 1920 x 1080i PAL Dolby
H.264 1920 x 1080p NTSC Dolby NEW
Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
Look to Burn To: in the Burn Dialog, and scroll down there to the option that you want.
Please let me know if this ISO Image choice is going to work for you. But I will keeping searching for the answer to these no media present situations.
ATR

Saving transcoded H264 Blu ray files?

I'm transcoding from a 1080 25i QT file to H264 for Blu ray and I'm keen to save the transcoded file for other purposes... Not only so I can re-use it in Encore (without having to re-encode) but also so I can create a .TS file (H264 mpeg4 & AC3) for use on a PS3 hard-drive.
Is this possible?
Thanks,
Steve

synergyfilms wrote:
Thanks for that! But I'm still confused as to what the Encore Readme document means when it says "Encore doesn't support chapter play lists in Blu ray"???
I think key to understanding what that means is to also understand what a chapter playlist is, and how it is different than a timeline.
A chapter playlist is a mechanism that allows the author (that's you) to create a customized list of one or more chapters from a single timeline to be played back by the user. So it can contain just one chapter from the parent timeline, or a few consecutive chapters from this timeline, or every other chapter from this timeline, etc. - fully customizable by the author.
A timeline contains at least one chapter, and in general plays from whichever chapter the user enters from to the end of the timeline, e.g., if there are 10 chapters and the user enters at chapter 3 from a menu, the timeline will play from the beginning of chapter 3 to the end of chapter 10.
If you now better understand the difference between the two mechanisms, then it becomes clearer: DVDs can use chapter playlists and BDs cannot.

Blue ray Export error code 2

I am using Adobe Encore CS4
Checking the project gives no error. But during Build when transcoding transcoding Following Error Comes
Blu-ray Object;"Movie",Error;"device error",Code "2", Note"Too many streams of PG stream in Clip"(Spec Table 9-3,Annex B)
Encore transcodes the main video. The imported video is in avi format.
The compression setting for the same are
Project Setttings
Authoring Mode blu-ray
Seetings PAL,1920x1080, Mpeg-2,frame rate 25
Maximum Audio/video bitrate 15.0 Mbps
Audio Transcoding PCM
Player Adobe Player
Export Settings
video
1920x1080i,25,high quality
video quality 5,
Profile main
level high
bitrate encoding VBR,2 Pass
Min bitrate 1.5, target 25, max 30
gop m frame 3, nframe 12
Audio
PCM , Output channel Stereo, Sample 16bit
Frequency 48khz

Try Save As and rename the file. Can you export the file now as a different format?
I'm guessing it's a corrupt file or it's written on bad blocks on your drive resulting in problems.
Run Repair Permissions:
1. Open Disk Utility in your Applications/Utility folder.
2. Click on the First Aid tab and select Repair Permissions
3. Click on the icon for your boot volume.
4. Click the repair permissions button.
To Repair your drive, you have to boot from another device.
Option 1) If you have your Install CD for Snow Leopard you can boot from the CD to run Repair Drive.
Option 2) If you have a clone backup, you can boot from the clone and run Repair Drive.

Once and for all: Can DVD SP build Blu-Ray disc content or not?

Maybe I’m crazy, but…
Everything I’ve heard to date has Apple backing the Blu-Ray format. Believing this, I just spent $900 on a new Lacie D2 external Blu-Ray burner (which IS Mac compatible). I also purchased Toast 8 (which IS Blu-Ray compatible).
All I need to do now is build my disc content (assign H.264 1920x1080 content, build menus, etc.) then drop it all into Toast and burn Blu-Ray video discs… right?
So what is all this I’m reading here about DVD Studio Pro supporting the HD DVD format and not Blu-Ray???!!!!!!
Am I going to be able to do this using DVD SP or not, and if not, can anybody tell me a program I can use to build my Blue-Ray disc content? (All of my HD content is H.264 (1920x1080) rendered directly from Adobe After Effects).
My deadline for this project is fast approaching and I’m hoping somebody can shed some light on this. If I can build Blu-Ray discs and burn them on my Mac using Toast 8 and the Lacie D2, I’ll make my deadline and justify the $900 spent thus far.
Can anybody help?
Thanks, SM

Wait a minute,
Maybe I don’t need to buy PC to run DVDit Pro HD. I have a Mac Pro! With Boot camp I have a PC! Any reason I shouldn’t try running DVDit on my Mac via the Boot Camp beta? That way I'd also be using my Lacie D2 Bu-Ray drive. And with Roxio's 30 day return policy I haven’t much to loose...
I'm calling Roxio tech support. Let you know how it goes
Sark
Message was edited by: sarkmachine
A LITTLE LATER:
Just got back from digging into Roxio's discussion forum and here's what I found:
I have travelled down the same frustrating path my friend!
But I did succeed doing it all on my new mac Pro, finally...
Install BOOTCAMP (free beta). Install WINDOWS XP ($269 from AMAZON). Install ULEAD BD RECORDER, which comes with DVD MOVIEFACTORY 6 (free trial, $80 to buy).
BDAV worked well from SONY V1-U burning to MATSHITA BD-MLT SW-5582 and played perfectly in new SAMSUNG 1200 palyer on my 57" DLP.
TIP - install BOOTCAMP et al on its own HD, and use NTFS... This will come in handy when doing a BDAV from a file such as HDV1080 that is larger than 4GB.
To do BDMV, you'll need SONIC DVD-IT PRO HD ($499) which I have yet to try...
Frustrating process, but kinda cool to figure it all out, especially when NOBODY in sales at any of these places seems to have a clue.
So there you go - must be possible
Sark

Blu-ray disc chapter buttons not working on authored disc.

Hi all,
I've created many SD dvd's with chapter menus without problem. However, my first attempt at a blu-ray disc is causing me trouble.
I'm running Enore CS4 under Windows 7. I had to install the "pxengine4_18_16a" driver because Encore CS4 was hanging up when i selected the "BLU-RAY" format under the Build tab. After i got Encore CS4 working, i started assembling the BD video.
I linked all of the chapter menu buttons to chapter playlists pointing to single chapter points in the timline. I tested the BD in Preview. It shows that the menu buttons are linked properly and are functioning. However, the authored BD disc isn't playing the chapters after selecting the chapter menu buttons. All of the other BD disc buttons work like; PLAY ALL, RESUME, MENU, MAIN MENU, just not the actual buttons that play the various chapter points on the timeline.
Is this a result of installing the "pxengine4_18_16a" driver or something else?
Has anyone encountered this problem with BD authoring?

The BD is not playing properly on the pc or a standalone?
I test BD first as an iso with Power dvd ultra with Virtual Clone DVD.
If the menu works properly its the standalone, might burn with a lower speed.
When dvd came out first there was a lot of incompatibilities, history is repeating itself.

Burning Blu-Ray: Sometimes successful / Sometimes not

I've been burning Blu-rays for the last couple of days. After a couple of burns, I get this message:
But, here's the deal:
I do indeed have a disk in the burner
I can't eject said disk (so the computer may "find it") without dismounting...
If I do unmount the burner, FCPX starts the burn process all over... with the same above message
A "cycle" ensues... until I restart--not just the app--but the computer.
Then... I'm good for a couple of burns before the cycle starts again.
Trouble shoots:
I've tried this across TWO different burners--two different brands, one NEW out of the box. Same result.
This has happened across TWO different projects in the same library
Anyone have any ideas?

Luis Sequeira1 wrote:
But I don't know if Disk Utility or some other program can burn the image to Blu Ray.
G'Day Luis,
Yes it works just the same as DVD.
Al

CS6 H264 Blu Ray Export Dolby Digital not bitrate selection Issues

Similar Messages

Maybe you are looking for