CS6, Ikegami MXF NOT Supported In Prelude & AME With Plug-In Installed?

Hi all,
The curse of the Ikegami MXF strikes again! Just installed CS6 including all of the latest Adobe updates which are so far so good. I love a lot of the new features though I haven't had much of a chance to get to any nitty gritty editing at this point. I am especially excited about Prelude!
I also purchased the corresponding latest version of this plug-in:
http://www.mainconcept.com/products/apps-plug-ins/plug-ins-for-adobe/t otalcode-cs-5-6.htmlhttp://
...which allows PPro to package the Ikegami MXF files for import through the Media Browser. I assumed the plug-in would translate to Prelude and AME as well to ingest/import Ikegami MXF properly. Initially I tested it only in PPro, which was successful, and went back today to perform various transcode tests in the hopes of having to only purhcase one pricey plug-in license rather having to purchase three in total. Unfortunately Prelude does not seem to recognize the plug-in...Here's a screen shot of the media browser in PPro vs. Prelude.
I also attempted to import straight into AME to attempt an Ikegami transcode. I was pretty positive that method would not work, and I was correct. AME crashed when a single Ikegami MXF video file was imported.
Please tell me this is an issue/bug? that can be fixed! Or my enthusiasm that Prelude will be the solution to my CatDV/Ikegami incompatibility will be deflated...I really don't want to be forced into a situation involving the tedious workflow of exporting/transcoding individual Ikegami clips out of PPro to be used on our other two editors and/or having to battle with a tightening state bureacracy for money to purchase two more expensive Total Code licenses...

Zac,
I have contacted MainConept per your request, but I will also mention here that I have not been able to re-create the AME crash as noted at the start of the thread. Total Code does work was promised within AME, but Prelude is still left hanging.
While Prelude does not provide video previews/playback/scrubbing of Ikegami MXF like the Media Browser in PPRo does, it will sucessfully transcode, what appears to be a video only file, into a sucessful self-contained video clip with the appropriate associated MXF audio. The successful transcodes from Prelude led me to believe that to some degree Prelude recognizes the Total Code plug-in even though the key feature of Prelude, video playback, is inaccessible. Though this quote from MainConcept says otherwise.
"What made you thinking that the TotalCode Importer probably was used because you were able to export Ikegami footage from Prelude is caused by the case that Prelude deals with pathes for that purpose. It doesn't need an importer for that."
I am hoping to utilize Prelude at the start of every edit session to selectively edit which files from a camera media card, including Ikegami GFPaks, will be copied/transcoded to their final storage location prior to editing, as Prelude is designed to do.
Another Prelude observation is that user presets created in AME, including some created using third-party plug-ins like UT and GoPro Cineform, are accessible in the transcode options within Prelude, while any Total Code based user presets created in AME are not visible in the Prelude transcode options.
I have a good feeling that now this conversation has been initiated bewtween the three parties that a solution will be reached! Finger crossed!
Thanks again,
Lindsay

Similar Messages

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

My CS5 program does not support CR2 photo taken with Canon Rebel T5i. Why?

My CS5 program does not support CR2 photo taken with Canon Rebel T5i camera. Why?

If you take a look at the following charts, you will find that both the S110 and the T5i are not supported in CS5, both cameras require photoshop CS6 with a camera raw point upgrade, Photoshop CC or Lightroom 4.3(s110) 4.4(T5).
Camera Raw plug-in Supported cameras
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Photoshop CC indepth : camera raw - Supported cameras for plugin and lightroom
http://www.adobe.com/products/photoshop/extend.html
Camera Raw-compatable Adobe applications
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

SharePoint Foundation 2010 - Your client does not support opening this list with windows explorer when clicking Open with Explorer

when I tried to open document library in Windows explorer view by click 'Open with Explorer', it popped up “Your client does not support opening list with windows explorer”
OS: Windows Server 2008 Enterprise x64
IE: 9.0 32bit
webcient service is runing
HKLM\System\CurrentControlSet\services\WebClient\Parameters and changed the BasicAuthLevel to 2 instead of 1.
Anybody knows how?
Thanks.

Did you add your site to trusted site list?
http://sharepoint.stackexchange.com/questions/15098/your-client-does-not-support-opening-this-list-with-windows-explorer
--Cheers

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

Your Client Does not Support Opening this list with Windows Explorer on Windows Server 2012 R2

I am trying to open a document library in Internet Explorer 11 on a Windows 2012 R2 server and I am receiving Your Client Does not Support Opening this list with Windows Explorer

Hi,
According to your post, my understanding is that you wanted to open a document library with the Internet Explorer 11 on a Windows 2012 R2 server. But you received the following error message: Your client
does not support opening this list with Windows Explorer.
There can be multiple reasons for it.
So, I recommend you can check with the following steps:
Go to the “Server Manager” of “Administrative Tools” > Enable the “Desktop Experience” feature in your environment.
Go to the “Services” of “Administrative Tools” >
Ensure the “WebClient” service is started.
Ensure that your computer has supported Web browser.
Ensure that Internet Explorer is configured correctly to add
https://*.sharepoint.com to Local intranet site in the “Security Tab” of “Internet Options”.
Ensure that
you have applied the latest updates on the system.
For more information, you can refer to the following articles:
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
http://mcgeeky.blogspot.com/2010/02/your-client-does-not-support-opening.html
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Your client does not support opening this list with windows explorer - related to multiple uploads?

Hi folks -
I've read through some threads regarding "Your client does not support opening this list with windows explorer" and it seems a lot of folks have a lot of solutions throughout the forum posts. Is there anything official or semi-official regarding
this?
I've tried a lot of the fixes including:
checking to see if the WebClient service is on
modifying so-and-so registry (I've since changed them back since they seem to have no effect)
and changing various settings in Internet Options including making sure the site is in the Local intranet zone.
I could live without this functionality but just recently my upload-multiple-files functionality in SharePoint 2010 has also gone away (red x instead of directory UI). I wonder if it's related somehow and could give us a clue.
If it helps I'm using various browsers but of the IE flavor 8 and 9 32-bit as the base for testing this.

For SharePoint 2013 (so could apply to 2010 as well), my problem was that I was trying to "Open with Explorer"
something that probably can't be opened with Explorer. In my case, I just wanted to open my team's Shared Documents with Explorer. I found that when I first log into SharePoint and view the page, I'm presented with those Shared Documents, but also other things
as well.
To get "Open with Explorer" to work, I must click "Shared Documents" under the Libraries heading on
the left. Then, all the other stuff (Links, Getting Started, etc.) go away and I'm focused on my team's shared documents. From there, I can go up to the Library Tools section in the ribbon, choose the Library tab in the ribbon, and click Open with Explorer.
Works like a champ on Windows 7 64-bit, running IE 9 32-bit.
Unfortunately that's not what was going on in my case. One obvious way to check is to see if other people or other computers can Open with Explorer. In my case it was just this one machine on my desk that had the issue.

In SharePoint 2010 Document Library "Open with Explorer" Your client does not support opening this list with Windows Explorer

Hi.
I am getting below error "Your client does not support opening this list with Windows Explorer" while click "Open with Explorer" option in document library.
My system is client machine which is 32 Bit system and
Web Client service is also running and Window 7 PC.
Other SharePoint sites "Open with Explorer" option in document library is working fine but specific site is giving error.
Even it was working fine but not is giving this error.
Please help me on it. Its making frustrations.
Thanks & Regards
Poomani Sankaran

Hi,
According to your post, my understanding is that you got “Your client does not support opening this list with Windows Explorer” error.
Did you enable the both authentication (Windows and FBA) on default zone.
As far as I remember when FBA is enabled on the same zone when Windows is used, it breaks whole client integration.
So it will be better if you will recheck your architecture and will use different zones for Windows and FBA.
There is also another thing to try: use claims based authentication with authentication provider which will work both with Windows and FBA.
What’s more, you can also check with below steps.
Use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
Add the site into Trusted sites to check whether it works..
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
In addition, you can also try to enable Basic authentication on the client computer, by setting the BasicAuthLevel registry entry of the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
For detailed steps, visit the following KB page.
http://support.microsoft.com/kb/841215/en-us
There are some similar threads for your reference.
http://social.msdn.microsoft.com/Forums/en-US/e9a07773-db23-46e9-8d1d-7015cd5aa13b/your-client-does-not-support-opening-this-list-with-windows-explorer?forum=sharepointgeneralprevious
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Trying to open a sharepoint library in Windows Explorer via IE 8 results in the error "your client does not support opening this list with windows explorer"

I am attempting to connect to a Microsoft Sharepoint library, via the "Actions -> Open in Windows Explorer" option from the Sharepoint page. When I do so, I get the error message "your client does not support opening this list with windows explorer". In short, I am trying to get the "drag and drop" functionality of a Sharepoint library.
I am running Windows 7 64-bit and IE8. The target Sharepoint environment is a MOSS 2007 EE. My Windows "WebClient" service is running, and I have no problem connecting to this exact library via a Windows XP computer running IE8.

Verify that the Webclient is started automatically from the Services.msc
Verify that your Portal is in the Intranet local security zone (You can reach it from Your Internet Explorer Browser Security Tag) if not add it to the list
restart the WebClient service if it's work good
If not you have to create a network share to your portal URL directly not your documents library.
Open Windows Explorer or My Computer from the Windows Start Menu.
From the Tools menu, click Map Network Drive…. A new Map Network Drive window opens.
In the Map Network Drive window, choose an available drive letter from the dropdown list located next to the "Drive:" option. Any drives already mapped will have a shared folder name displayed inside the dropdown list, next to the drive letter.
Type the name of the folder to map wich is in this case your SharePoint Portal URL (Don't include the documents libraries)
Click the "Reconnect at login" checkbox if this network drive should be mapped permanently. Otherwise, this drive will un-map when the user logs out of this computer.
If the remote computer that contains the shared folder requires a different username and password to log in, click the "different user name" hyperlink to enter this information.
Click Finish.
I am looking for a suite method :)

Error: Your client does not support opening this list with Windows Explorer.

I have enabled both authentication (Windows and FBA) on default zone, now when I want to open any document library on windows explorer it showing me an error.
Your client does not support opening this list with Windows Explorer.
Web client service is running on server.
Desktop Experience feature is also enabled on server
Windows explorer is working fine when FBA is disbled on default zone.
Need both authentcation on default zone.

Hi,
According to your post, my understanding is that you got “Your client does not support opening this list with Windows Explorer” error.
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
In addition, you can also try to enable Basic authentication on the client computer, by setting the BasicAuthLevel registry entry of the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
For detailed steps, visit the following KB page.
http://support.microsoft.com/kb/841215/en-us
There are some similar threads for your reference.
http://social.msdn.microsoft.com/Forums/en-US/e9a07773-db23-46e9-8d1d-7015cd5aa13b/your-client-does-not-support-opening-this-list-with-windows-explorer?forum=sharepointgeneralprevious
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Explorer View - Your client does not support opening this list with Windows Explorer MOSS 2007 '

We recently had a major deployement, after which Explorer View started giving error message.
Before deployement, all was working fine.
Error: Your client does not support opening this list with Windows Explorer
Webclient service is already enabled.
The site has been added to trusted site lists.
All Active-x controls have been enabled.
Browser: Internet Explorer 8 - 32 bit.
Microsoft Office 32 bit is also installed.
Thanx in advance.

You could try updating the following registry key on a client PC as a test: HKLM\System\CurrentControlSet\Services\WebClient\Paramenters\AuthForwardServerList to include the URL of your sharpoint site. Add the root site and it might enable this functionality.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

My samsung says video out from i pad is not supported. i am connecting with apple dock using hdmi. I do get the audio

my samsung says video out from i pad is not supported. i am connecting with apple dock using hdmi. I do get the audio any suggestions?

Jeffrey-
If the HDMI input to the Samsung is not compatible, does it have a VGA or composite input? I have both the HDMI and VGA adapters for the iPad, which work with the small Vizio HDTV I tried. I understand a composite video adapter is also available.
Fred

Getting error "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

How to fix this problem
"Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

When I have seen this message it is either when I try to open a document with an older version of Indesign E.g. an indesign 2014 document with Indesign CC.
The other time I have seen it is to open an Indesign CC document with Indesign 2014 which does not have Mindsuite - a plugin I use. Mindsuite, as yet, has not upgrade the plugin for Indesign 2014 therefore it recognises that a the document was created withe a plugin that the 2014 version does not have installed.
I believe your problem will be something like that.

CS6 After update, "not supported on this type of Mac."

Hi
On a fresh install of 10.6, I installed CS6 master collection. It was working fine till I ran the update and now it wont open but brings up the message "Not Supported on this type of mac".
I've tried it on 3 different machines, and I can remember having the same issue with CS5.5, but thought the upgrade to CS6 may resolve it. We need to have 10.6 on our machines as other software requires it. Is there another solution?
Thanks
http://forums.steampowered.com/forums/showthread.php?t=2287095

How old is your Mac? if it is about 2006 or 2007, then it is considering to be painfully aging in days of Internet age.
That is the reason why I suggested - latest newest computer is highly recommended. Yes, I know it is expensive to invest. But the trade-off is that you get most out of more efficiency and faster workaround with fastest, new computers. I usually buy new laptop and Mac Pro every two years. My new current Mac Pro has 32 gb, a 12-core Intel processors. Loved it. Same with MacBook Pro 17 unibody - in about six months, I'll buy new MacBook Pro.. as far as I understand that Apple no longer offer 17" laptop. But that is ok.
The point is that it is a good idea to keep computer equipments to current as much as possible. It makes a lot sense. Because I use MacPro every day for my job with different hats role dealing with different responsibilities and functions and operating few businesses all together.
Anyway.. just some thought and some two cent tips and advice.
You might wonder why I had mentioned 'have a read' on Tech Specs FIRST before buying any kind apps. I had seen some issues for some customers - little did some of them know that they had 'aged' computer that doesn't meet the latest software's tech requirement. It is unfortunate situation when they realized that after they made a huge investment into software.
Not that I am assuming that you didn't see or read the Tech Spec requirement. Just a suggestion is all I can say. Hopefully this helps to clear up something...
Hope that things works out ok for you to run Dreamweaver app on your laptop. How big is your RAM memory? If it is only two, I suggest double it.
Best!
Brian

CS6 Photoshop Extended not supported

I have a late 2012 macmini 2.3 GHz Intel Core i7 and I have installed CS6 Design Premium student license. Photoshop will not open; it says it is not supported on this type of Mac. Is there a fix for this?

It says "Photoshop is not supported by this type of Mac"; there is not error code. Also adobe acrobat x + extension manager do not install, but illustrator, bridge, indesign do.
I am running bootcamp and my partition is divided 50/50 of 1TB total.

CS6, Ikegami MXF NOT Supported In Prelude & AME With Plug-In Installed?

Similar Messages

Maybe you are looking for