CS6 Infrastructure update problem. Attn:Todd

Hey folks,
My Adobe Application manager is saying that I need to update several programs, Extension Manager, Flash, Illustrator, Photoshop, Prelude, Premiere. The update required for all of these programs seems to be a common file called "Adobe CSXS InfrastructureCS6". When I try to install this, via the updater, the updater crashes my whole system. (Mac osX.6.8 CS5.5 still installed). I called adobe tech support and talked to them, and they recommended creating a new user account and trying the update. I did this and still got the crash. They then recommended that I try installing the file manually. I can't find a manual installer for this file anywhere on the Adobe website. The guy that I talked to was a premiere support guy, and insisted that there were no updates for Premiere CS6, and that there was no one to talk to about problems with files common to several programs, he suggested I try forums. I asked to speak with a manager, and he put me on hold for 10 minutes at which point I gave up. I thought I would post here to see if anyone else has a similar issue.
I was also hoping Todd would read this and refer me to someone who can help as normal Adobe support channels have been no help.
Addendum: After having to force reboot my machine several times trying to do this update, my machine started to hang in other ways. I decided to restore by boot drive from a time machine back up from two weeks ago when my machine was rock solid stable. My machine now seems to be acting fine, although the InfrastructureCS6 update still crashes. It no longer takes down my system when crashing though. I only tried it once since the restore. I'm a little afraid to try it again. I want to be able to keep my adobe software up to date though.
-Matt

I'm obviously not Todd, but I ran the updater without incident on my tower and laptop (both on 10.6.8). I suspect your problem isn't Adobe-related, but rather Mac-related.
I suggest routine maintenance, then try again. Repair Permissions. Run Disk Warrior. Zap the PRAM occasionally (hold p,r, option and command on boot, and wait for two or three chimes before letting go), and try booting in Safe Mode (hold shift on boot) before running the updater. And/or, try creating a new user with Admin privileges, and try again.
You could also consider un- and re-installing CS6.
Good luck.

Similar Messages

Dreamweaver CS6 Library Updating Problem

When updating my menu, which is a Library item, using Dreamweaver CS6, after the initial update sequence the program keeps trying continuously to update related files but will not complete the update. After I cancel the update it initiates the update again and again does not complete the update. The original complete update actually works but the continuous updating cycle make it so I have to close the program and restart to even work on the site.
Has anyone else experienced this?
I am using the Creative Cloud subscription for CS6. I am using the Windows 7 professional platform.

Same issue here:
Steps to reproduce bug:
1. Save a library item that is referenced in a simple html file
2. When saving the template it correctly asks me if I want to update the above HTML file. When I click update it immediately comes up with a second update box without saving the library item again. It is instant.
3. Above HTML is never actually updated.
Expected results: It should only me once per save to update files that the library items are referenced in. CS5.5 did not have this problem.
The only solution I found was to remove the library item from the HTML template and re-add. That fixes it which definatley leads me to believe it is a bug in the CS6 library.

Adobe CS6, Mac Related: I Need Standalone "CS6 Infrastructure Updater."

I have got two computers, but only one of them can access the Internet.
Please have an Administrater repond as soon as possible.
I have searched long and hard, but I cannot access the standalone updater.
This is bull crap.

http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l

CS6 update problem

I have Photoshop CC and Photoshop CS6 running on Mavericks. CS6 will not update. How do I get CS6 to Update?

It seems error is coming due to ExMan failure. Ps must be updated now, Verify the same by Ps->About Photoshop.
For ExMan issue please try installing from the link as mentioned by Samoreen,
If it still fails then provide us with the following logs.
You can find them at:
ExMan Installer logs
For Mac:
Library\Logs\Adobe\Installer
AAM logs
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Regards,
Ashutosh
[email protected]

May Release: New partner support, Infrastructure updates, Site templates and bug fixes

Link: http://www.businesscatalyst.com/_blog/BC_Blog/post/May-release-New-partner-support-Infrast ructure-updates-Site-templates-and_bug-fixes/
We are announcing a new Business Catalyst release, scheduled to go live on Thursday, May 3rd. With this release, we are continuing our investments in system performance and stability by increasing our web servers capacity, enabling HTTP acceleration to provide faster site loading times, and improving the site creation speed by using pre-generated sites.
On the product side, we have completely revamped our partner support workflow taking advantage of the Adobe support infrastructure and tools, enhanced the site templates workflow for partners, and included lots of bug fixes and improvements. Read through the following sections to get detailed information about this release:
Partner support
Infrastructure updates
Features and enhancements
Issues fixed by this release
What's next
You can jump to the corresponding section by clicking the above links.
Partner support
Updated Help & Support partner experience
Following Adobe ID support, we have upgraded BC support tools (cases, chat, documentation) with standard Adobe tools. As a partner, you can now benefit from the same support tools as the rest of Adobe Creative Suite, and can track your support cases with Adobe BC, Dreamweaver, Muse or Photoshop in a single place.
Partners with more than 100 paid sites will get 2nd level chat support, which includes a higher priority, by default. If you have more than 100 paid sites, but spread across different Partner Portals, please ask support to enable 2nd level chat for you.
Support experience for your Small Business owner clients can now be owned by partners (see below).
Custom Help & Support URL for your clients
As a partner, you are probably already offering various additional services to your clients besides building & maintaining their BC site. Support, tailored specifically to your client needs, is usually one of these value-added services. We are now enabling you to take your Support service to the next level. In Partner Portal Settings, you have the option to set a custom URL for what will open when your client clicks on Help & Support inside Admin Console:
If you have multiple partner accounts, for different verticals, you can specify a Support URL for each of these.
The default Support experience provided by BC for your clients will be updated in a few releases to be similar to the partner support experience. This includes BC-branded support cases and documentation. If you'd like to keep a white-label experience for your customers, please set your own Help & Support URL in Partner Portal.
For more details please read the Improved support workflow and new forums announcement on our blog.
Infrastructure updates
Between our April release and the following infrastructure updates have been enabled
Limited trial sites for free partners – starting with our May release, the number of trial sites a Free Partner can have will be limited to 100. Once the limit is reached, Free Partners that need to create a new trial site have the options to upgrade to a higher partner plan, upgrade some of the trial sites to paid or delete unused/expired trials.
Automatic trial expiry extension - with this release, trial site expiry date will be automatically extended with 30 days every time an admin user logs in the system through the admin interface or through FTP.
Installed additional hardware - we have installed additional web servers on all our data centers, that translate into an increase of the existing capacity with over 70%.
Updated DNS infrastructure - we have improved the DNS resolution for email delivery so that we can increase the rate at which we're sending the system operational emails
HTTP acceleration – all sites static assets are served from a new cache engine (images, CSS and JavaScript files, together with improved headers that should allow the browser to cache them better for a browsing session). This update has been turned on along with our April release, and has made all the BC sites load faster on first and on subsequent loads.
Accelerated site/partner creation – we've changed the way new sites are created for faster speed, pre-creating them and reusing pre-created sites when needed, and have also improved the creation process for new partners, minimizing the impact of new CCM customers on the existing datacenters.
Adobe ID for partners - in order to support an integrating experience between the various Adobe tools a partner may use (Dreamweaver, Muse, Support forums) we have added Adobe ID support for Business Catalyst partner accounts. Starting April 19, partners are asked to merge their current Business Catalyst account with their Adobe ID accounts. For more details about the transition process and FAQ please read the Introducing Adobe ID blog post.
Updated Terms of Use - Along with several other changes in our processes in the past few months, we also revamped our Terms of Use and the signature process by requesting every admin user to sign a TOU. We have completed the rollout for partners, and we might be pushing an updated partner Terms of Use version within the following weeks. For more details and questions about this change, read the New Terms of Use for Business Catalyst blog post.
Features and enhancements
Site templates
To support the increasing number of partners building, sharing or reusing templates to create new sites, we're extending our site templates support from our partner portal with a new template type and improved management support. The update is going to enable partners to mark sites as templates and choose between making them available in Online Business Builder and keeping them private in their partner portal. A template site will not expire and has the same limits as any other trial site.
Based on your partner level, you can create private or public templates using the Site Details screen or the Tools>My Site Template section from your Partner Portal. Standard partners can only create private templates, while Free Partners can only view site templates that have been transferred to their accounts by other partners.
The number of templates a partner will have will be limited and will vary based on partner level: free partners can store up to 5 templates in their partner portal, standard partners have up to 100 site templates while Premium Partners might have up to 200 templates. Paid sites marked as templates are not counted against these limits.
Business Catalyst Partner fixes
While we are really focused on making the Business Catalyst integration into Creative Cloud a smashing success, we are slowly resuming our efforts to deliver fixes that have been requested by our partners. This release includes the following partner fixes:
Improved product custom fields - we have increased the maximum number of characters for product custom fields to 1024 (previous limit was 256); this gives partners and customers additional space to use when working with products
Improved Secure Zone subscribers list - we have added the customer email address in the Secure Zone Subscribers list to enable partners better filter and manage customers
Better experience when exporting data - to prevent customer confusion when exporting data from Mac computers, we have removed the export to excel option and exporting in CSV format by default.
Social plugins integration updates
Starting with our May release, we are updating the social plugins support to require users to get the plugin code from the third party provider and saving into his Business Catalyst website. The module tags and configuration will remain unchanged, but will render an empty tag until the partner or site owner will update the module template to include the corresponding module code snippet from the third party platform provider.
For more information about how you can enable the Social Plugins on a Business Catalyst websites, read the Social Media: Integrating Facebook and Twitter knowledge base article.
Other changes
Updated weekly emails - Starting with our May release, the information in the site weekly emails has been filtered based on the site's plan. For example, webBasics site reports will no longer include the sales report.
Localization - we improved and increased the coverage of the admin interface translations into German, French and Japanese
Site Settings -> Ignored IP addresses has been relocated under Reports -> Visitors -> More.
BC-Dreamweaver integration performance improvements
Development Dashboard has been removed, as it didn't provide a clear useful, ongoing benefit. The information present in the development dashboard has been integrated into our new Help & Support section.
Payment gateway settings - for more privacy and data protection, we have updated the Payment Gateway configuration screens to obfuscate the sensitive login information. Fields that have been obfuscated are now requiring confirmation.
Report abuse badge on trial sites - for compliance reasons, a "Report Abuse" link has been added to the front-end of all trial sites of free partners that don't have any paid sites. When they click the Report Abuse link, site visitors are redirected to a form submission page on businesscatalyst.com site.
Issues fixed by May release
Issues 3051303, 3168786 - Workflow notifications - Fixed a problem preventing workflow notifications emails from being sent.(see get satisfaction forum discussion)
Issue 3164074 - Fixed a bug causing the lightbox gallery created from Muse to be displayed behind page elements
Issue 3162810 - Fixed a bug in rendering engine to prevent content placed between body and head tags being incorrectly moved inside the body tag
Issue 3166610 - Fixed a broken link to Partner Portal in Internet Explorer
Issue 3175003 - Fixed an issue that caused an incorrect price display for the Year One-Off Setup Fee when upgrading a site from Admin using CB
Issue 2567278 - Fixed a bug causing site replication to ignore product attributes
Issue 2947989 - CRM passwords are now case sensitive
Issue 2723731 - Removed CSS files from the head section of the Layouts files, when downloaded and opened in Dreamweaver, via the BC extension
Business Catalyst new admin interface updates
Added "Save and Add New" button in Web App Item Add & Edit screens (see get satisfaction forum discussion)
Updated Quick Actions menus to add more actions (see get satisfaction forum discussion)
Fixed an issue causing Recent items menu to display deleted items (see get satisfaction forum discussion)
Fixed a display issue on File Manager making top buttons unreachable (see get satisfaction forum discussion)
Fixed the scrollbars in Email Marketing>Campaign>Stats>Bounced Emails reports (see get satisfaction forum discussion)
Fixed an issue causing Recent items menu to brake after selecting the current page from the Recent Items menu (see get satisfaction forum discussion)
Replaced the Success notification displayed when selecting Users or Permissions tabs from User Roles with an Warning
Change the action label displayed in User Roles list from View to Edit to match the list pattern from Admin Users
Fixed a missing file JavaScript error occurring when trying to open image manager from product details-> Attributes -> options
Moved System Emails section from Site Setting to Site Manager (see get satisfaction forum discussion)
Updated Domain Management interfaces to close the modal window and refresh the domain list after successfully adding a domain
Fixed an issue preventing the Hyperlink Manager to function properly (see get satisfaction forum discussion)
Updated the confirmation message received after copying a page to match the new workflow and button names
Fixed an issue causing the current screen or section to not be highlighted in the menu
Updated styling on the new dashboard, user management and email accounts interfaces
Updated dashboard reports filters and chart display; made the chart and the filter use the site time zone
Fixed an issue preventing users from inviting new admin users or create new email accounts on Internet Explorer 8
Fixed an issue preventing users from deleting Email Accounts or Admin Users in Internet Explorer 8
Fixed some issues preventing password recovery email from being sent
Removed the alert message displayed when the user or email account limit has been reached
Added localization for the simplified dashboard
Fixed display issues for site limits, domains and user list in the simplified dashboard
Added Custom reports for webBasics plan
Fixed a bug generating a "500:Collection error" on the simplified dashboard when user did not had View users permission
Added TOU checkbox in the email account setup screen
Updated Site Preview link in the dashboard to load the default domain
Fixed an issue in the new File Manager forcing a user to press Undo twice in order to see the change take effect if the code that was previously formatted contained any <"tag" with more than 2 lines
Fixed an issue causing the File Manager editor toolbar to incorrectly render if page URL path is longer than certain value; starting with this release, the site URL is trimmed
Fixed an issue causing the invite users to be displayed as [object Object] in dashboard and admin user list
Fixed a bug in the new admin causing the interface to become unresponsive when using the browser Back button
Fixed an issue in the new File Manager causing "Save Draft" button to publish the default page template instead of creating a draft version
Fixed a broken invite link issue in the Email Account invite email
Updated loading indicators in File Manager and Email Accounts screens
What's next
The first item on the what's next list might not be news for many of you, but it's definitely one of the most important milestones this year. The Creative Cloud launch is just around the corner, and Business Catalyst is playing an important role in that, as the publishing platform for Adobe® Muse and Dreamweaver. This launch will capture all our attention within the next weeks as we want it to be our best ever.
We'll start our next development cycle on May 15th, while the next Business Catalyst release is going to be pushed live in mid June. That being said, the following items are already on our launch plan for the next release and a few more will join the list. Please expect an update on our 2012 plans around mid May.
HTTP throttling – all page load and API calls to BC will be protected against attacks, this might trigger problems for API heavy sites. We are looking into enabling this update along with our June release, and will help make sure that a reasonable number of requests will be accepted from the same computer per minute.
Automatic site deletion - Starting with the June release, we are going to start automatically delete expired trial sites and canceled sites. Customers will be notified twice before we are going to proceed with deleting the sites.
Thank you,
Cristinel Anastasoaie
Adobe Business Catalyst Product Manager

In reference to this change in the Custom Reports... Better experience when exporting data - to prevent customer confusion when exporting data from Mac computers, we have removed the export to excel option and exporting in CSV format by default.
What is the customer confusion we are trying to stop here? I've got even more confused customers at the moment because all of a sudden they can't find the export to excel option but know it exists if they log in on a PC?
Mark

Can't use the keyboard shortcuts in Photoshop CS6 when updating Mavericks

Can't use the keyboard shortcuts in Photoshop CS6 when updating Mavericks

Thanks everyone. What worked for me was a version of the suggestions above. I had the problem with the ≠ character appearing in all my Photoshop CS6 keyboard shortcuts and rendering them largely unusable. However, I don't have any other keyboards besides US English enabled on my Mac. I do have Spell Catcher installed, which works through the keyboard input method. So, I switched from Spell Catcher back to English (with the US flag), launched Photoshop and presto, my keyboard shortcuts were restored, absent that obnoxious ≠ symbol. Once in Photoshop, if I reselect Spell Catcher, the ≠ symbol returns so I have to run Photoshop without the help of Spell Catcher - or forego the use of keyboard shortcuts while it's on. Since the developer of Spell Catcher passed away last year there will be no more updates to the otherwise very useful utility. Apparently this keyboard shortcut problem in the various guises reported here is linked to some element of the OS X input method in Mavericks, as Photoshop seems to manifest the issue in relation to one specific input source or another. This is the first application in my experience to have a problem with Spell Catcher in OS X 10.9. So I will continue to use it, except in Photoshop. Spell Catcher was never updated for Mountain Lion or Mavericks so people like me will have to use it "at our own risk" as the saying goes. Be that as it may, it does appear to be a bug in Photoshop that's at the root of this matter as different people have somewhat different problems with the OS X input method - not that I expect either Adobe or Apple to do anything about it.

Flash CS6 Not Updating, Video Events

Are others having the same problem as me, Updating Flash and other apps in CS6? Followed some "Known Issues" and updated my Flash Help but still the link doesn't work inside Flash. I keep getting an error...
Flash Pro CS6 Help Update
Update is not applicable. Error Code: U44M1P28
Another issue was the VideoEvents. I use video in all my apps and to perform a simple addEventListener(VideoEvent.READY, myFunction) doesn't work. I think Adobe was a little early in releasing their CS6 apps.
Comments greatly appreciated.

Hi,
issue 1:
The 'Update is not applicable' error might occur if you had installed any adobe pre-release/beta software on your machine earlier and have not uninstalled or the uninstallation was not complete. Uninstalling your CS6 software and reinstalling the same would help you surpass this error and it will let you use the software updates without any issues.
You may consider using the creative suite cleaner tool available at http://www.adobe.com/support/contact/cscleanertool.html for this purpose.
issue 2:
This looks like an issue if we use import fl.video.*
Instead if you could use it directly in the listener like
myFLVPlayback.addEventListener(fl.video.VideoEvent.READY, readyHandler);
may help you overcome such circumstances.
Let me know if the above is of any help to you.
Thanks!
Mohan

Updating Web CS6, Flash update freezes

Updating Web CS6, Flash update freezes, what is the problem?

In FB 4.5, if you go to the Data Services view, and then right click on the data service (WSDL) you connected to, there is an option there to refresh the WSDL. It works very well for me.

CS6 64bit sound problem

Hi,
I have Window 7 64bit system.
Since I purchased the CS6, as soon as I installed it, the audio of my system is not playing any sound smoothly.
First Youtube plays with some missing audio parts. Then I updated the flash player. NO luck.
then I was recordign with Audition and the same problem was noticed when I played the sound.
I re-imaged my system with clean window 7. The audio is prefect and no issue. Then I installed the CS6 and got problem. So I know the source of problem is CS6.
can anyone help.
thanks

Ask in the AU forum. Perhaps it messes with the audio settings or installs some VST stuff that interferes...
Mylenium

ACR 8.4 Update Problem

Today when I use Photoshop CC menu Help>Updates.... It found and installed ACR 8.4 and Updated CS6 ACR to version 8.4. However Photoshop CC ACR remains at level 8.3. So I use Photoshop CC menu Help>Updates... again and it show everything is up to date. I the use its about button that was not help. So I the use its Preferences button. It now looks like my Adobe Application Manager preferences are set to only look for CS6 updates and the is no way to set its preferences to also check for CC updates. Adobe Creative Cloud Desktop application state Applications are up to date including Photoshop CC. However ACR is not shown in the Creative cloud Desktop application window.
Did Photoshop CC ACR get update to 8.4 on any user Windows machine?

Yes I had two problems lately.
My CS6 was still at the none subscriber level but showed up to date in the Creative Cloud Desktop. Deactivating CS6 then updating CS6 also did not updated CS6 to 13.1.2. So I installed CS6 over itself to back level it to 13.0 . I use the trial option during the install. However it installed as an Activated CS6 ay level 13.0. Because my CS6 credentials were still intact as were my Photoshop CS6 Preferences. I then used menu help>updates and it updated the activated CS6 to 13.1.2. http://forums.adobe.com/message/6232252#6232252
Some time after that I had a problem Signing into the creative cloud desktop application. Others also had this problem applying the IMSLib.dll update did not fix this for me and some others. You had me delete the opm.db file in the OOBE folder. Which worked. http://forums.adobe.com/message/6237914#6237914

Unable to link media to MTS files in Premiere CS6 after updating to 10.8.3

I am now unable to link media(MTS files) in Premiere pro CS6 after updating to 10.8.3. Instead of the folder where the MTS files where there is now "AVCHD" with the quicktime symbol. When I control click, it just offers me with the quick look option. Any advice would be very much appreciated.

Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Update problem - VBDATA table

Dear All,
We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
Sometime the UPD and UP2 work processes hung without apparent reason.
In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
The Production and the Developer systems seem not affected by this problem.
Have you got any idea about the reason of the problem?
Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
Thanks in advance,
Federico Biavati
My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

Hello Siva,
This is what I did:
> Check how many entries do you have in VBDATA currently.
More than 1.000 in every SAP systems that Iu2019m creating from Production
> You might want to run the reorganize updates program to clear the old updates
> that are pending/in error
Good point!!
After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
Thanks for you help,
Federico

Chart x scale update problem

LabVIEW 8.5.1
Sweep Chart Problem
The x scale values do not update until after the 2nd sweep. The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
It appears to be a problem with the chart, since it happens with any vi with a sweep chart. I've used versions 6 through 7 for years and never seen this. I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
I've included a simple example.
Thanks much,
JSC321
Attachments:
Chart Sweep Scale Update Problem.vi ‏32 KB

You have a typical race condition!
There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
(Execution order is enforced even if the wire value is not even used inside the loop )
Try it!
Message Edited by altenbach on 12-23-2008 11:08 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
HistoryRace.png ‏10 KB

Why won't Photoshop CS6 Extended update? I keep getting a failed to update message.

Why won't Photoshop CS6 Extended update? I keep getting a failed to update message.

Run the Creative Suite Cleaner Tool, reinstall the program, try again.
Mylenium

Updating problem...I have a update that starts out going through but then does not finish just keep running

also with the update problem it says software update and below the running bar it says connecting to the server

Please do the following: 
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box''). 
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

CS6 Infrastructure update problem. Attn:Todd

Similar Messages

Maybe you are looking for